Arylazopyrazole-modulated stable dual-mode phototransistors.

High-performance organic devices with dynamic and stable modulation are essential for building devices adaptable to the environment. However, the existing reported devices incorporating light-activated units exhibit either limited device stability or subpar optoelectronic properties. Here, we synthesize a new optically tunable polymer dielectric functionalized with photochromic arylazopyrazole units with a cis-isomer half-life of as long as 90 days. On this basis, stable dual-mode organic transistors that can be reversibly modulated are successfully fabricated. The trans-state devices exhibit high carrier mobility reaching 7.4 square centimeters per volt per second and excellent optical figures of merit, whereas the cis-state devices demonstrate stable but starkly different optoelectronic performance. Furthermore, optical image sensors are prepared with regulatable nonvolatile memories from 36 hours (cis state) to 108 hours (trans state). The achievement of dynamic light modulation shows remarkable prospects for the intelligent application of organic optoelectronic devices.

Bis-azopyrazole Photoswitches for Efficient Solar Light Harvesting.

Although natural sunlight is one of the most abundant and sustainable energy resources, only a fraction of its energy is currently harnessed and utilized in photoactive systems. The development of molecular photoswitches that can be directly activated by sunlight is imperative for unlocking the full potential of solar energy and addressing the growing energy demands. Herein, we designed a series of 2-amino-1,3-bis-azopyrazoles that features a coupled πn system, resulting in a pronounced redshift in its spectral absorption, reaching up to 661 nm in the red region. By varying the amino substituents of these molecules, highly efficient E→Z photoisomerization under unfiltered sunlight can be achieved, with yields of up to 88.4%. Moreover, the Z,Z-isomers have high thermal stability with half-lives from days to years at room temperature. The introduction of ortho-amino substitutions and meta-bisazo units leads to a reversal of the n-π* and πn-π* transitions on the energy scale. This change provides a new perspective for further tuning the visible absorption of azo-switches by utilizing the πn-π* band instead of the conventional n-π* band. These results suggest that photoresponsive systems can be powered by sunlight instead of traditional artificial lights, thereby paving the way for sustainable smart materials and devices.

Solar Azo-Switches for Effective E→Z Photoisomerization by Sunlight.

Natural photoactive systems have evolved to harness broad-spectrum light from solar radiation for critical functions such as light perception and photosynthetic energy conversion. Molecular photoswitches, which undergo structural changes upon light absorption, are artificial photoactive tools widely used for developing photoresponsive systems and converting light energy. However, photoswitches generally need to be activated by light of specific narrow wavelength ranges for effective photoconversion, which limits their ability to directly work under sunlight and to efficiently harvest solar energy. Here, focusing on azo-switches-the most extensively studied photoswitches, we demonstrate effective solar E→Z photoisomerization with photoconversions exceeding 80 % under unfiltered sunlight. These sunlight-driven azo-switches are developed by rendering the absorption of E isomers overwhelmingly stronger than that of Z isomers across a broad ultraviolet to visible spectrum. This unusual type of spectral profile is realized by a simple yet highly adjustable molecular design strategy, enabling the fine-tuning of spectral window that extends light absorption beyond 600 nm. Notably, back-photoconversion can be achieved without impairing the forward solar isomerization, resulting in unique light-reversible solar switches. Such exceptional solar chemistry of photoswitches provides unprecedented opportunities for developing sustainable light-driven systems and efficient solar energy technologies.

Brønsted Acid-Catalyzed Intramolecular Tandem Double Cyclization of γ-Hydroxy Acetylenic Ketones with Alkynes into Naphtho[1,2-b]furan-3-ones.

A metal-free and atom-economic route for the synthesis of naphtho[1,2-b]furan-3-ones has been realized via p-TsOH·H2O-catalyzed intramolecular tandem double cyclization of γ-hydroxy acetylenic ketones with alkynes in formic acid. The benzene-linked furanonyl-ynes are the key intermediates obtained by the scission/recombination of C-O double bonds. Further, the structural modifications of the representative product were implemented by reduction, demethylation, substitution, and [5 + 2]-cycloaddition.

Experimental Investigation on Laser-Induced Electrochemical Silver Plating Technology.

The silver coating is widely used in electronic device manufacturing due to its excellent conductivity and soldering properties. Conventional preparation of local silver coating often uses the preplated silver, mask high-speed silver plating, and deplated silver processes. In this paper, the laser-induced electrodeposition technique is used to perform maskless laser-induced localized electrodeposition on a copper substrate preplated with a layer of silver. After the deplated silver process, ultrathin silver coatings with high dimensional accuracy, good corrosion resistance, and good bonding were obtained. The spatial distribution of the transient temperature field under laser irradiation is studied, the variation pattern of cathode substrate current under laser irradiation is tested, and finally, the spatial distribution of the pressure field under laser irradiation is simulated by Comsol. The effect of different laser scanning methods on the coating morphology was investigated, and the experimental study of the different single pulse energy-induced localized silver coatings was systematically carried out. The results show that the localized coating obtained by cross-line scanning with a laser single pulse energy of 93 µJ is flat with a film thickness of 0.23 µm, high dimensional accuracy, and good bonding force and corrosion resistance properties. This method provides a new approach for the preparation of a localized silver coating.

A pH-responsive MOF-functionalized hollow mesoporous silica controlled herbicide delivery system exhibits enhanced activity against ACCase-herbicide-resistant weeds.

BACKGROUND: Weeds grow aggressively in agricultural fields, leading to reduced crop yields and an inability to meet the growing demand for food. Herbicides are currently the most effective method for weed control. However, the overuse of herbicides has resulted in the evolution of resistance mutants and has caused environmental pollution. Therefore, new technologies are urgently required to address this global challenge. RESULTS: We report a copper-benzene-1,4-dicarboxylate metal organic framework (Cu-BDC MOF)-functionalized carboxyl hollow mesoporous silica (HMS-COOH) delivery system for the pH-controlled release of the acetyl-CoA carboxylase (ACCase)-inhibiting herbicide quizalofop-p-ethyl (QE). The delivery system (QE@HMS@Cu-BDC) enabled the efficient control of barnyard grasses that are susceptible and resistant to ACCase-inhibiting herbicides, which showed 93.33% and 88.33% FW control efficacy at 67.5 g ha-1 , respectively. With the lowest pH value (3), QE and copper ion were released slowly to total 70.30% and 78.55% levels (respectively) from QE@HMS@Cu-BDC after 89 h. QE@HMS@Cu-BDC showed better absorption, conduction, transportation and ACCase activity inhibition performance than that of QE emulsifiable concentrate (EC) in both susceptible and ACCase-herbicide resistant barnyard grasses. In addition, with the safener effect of carrier HMS@Cu-BDC and the aid of the safener fenchlorazole-ethyl (FE), the application of QE@HMS@Cu-BDC was shown to mitigate the damage caused by QE to rice plants. CONCLUSION: This work found that the new material HMS-COOH@Cu-BDC can be used to mitigate herbicide-induced oxidative stress and improve rice plant safety. Futhermore, the QE@HMS-COOH@Cu-BDC constructed in this research might be used as an efficient nanopesticide formulation for weed controls in paddy rice fields. © 2023 Society of Chemical Industry.

Solar Efficiency of Azo-Photoswitches for Energy Conversion: A Comprehensive Assessment.

Photoswitches can absorb solar photons and store them as chemical energy by photoisomerization, which is regarded as a promising strategy for photochemical solar energy storage. Although many efforts have been devoted to photoswitch discovery, the solar efficiency, a critical fundamental parameter assessing the solar energy conversion ability, has attracted little attention and remains to be studied comprehensively. Here we provide a systematic evaluation of the solar efficiency of typical azo-switches including azobenzenes and azopyrazoles, and gain a comprehensive understanding on its decisive factors. All the efficiencies are found below 1.0 %, far from the proposed limits for molecular solar thermal energy storage systems. Azopyrazoles exhibit remarkably higher solar efficiencies (0.59-0.94 %) than azobenzenes (0.11-0.43 %), benefiting from largely improved quantum yield and photoisomerization yield. Light filters can be used to improve the isomerization yield but inevitably narrow the usable range of solar spectrum, and these two contradictory effects ultimately reduce solar efficiencies. We envision this conflict could be resolved through developing azo-switches that afford high isomerization yields by absorbing wide-spectrum solar energy. We hope this work could promote more efforts to improve the solar efficiency of photoswitches, which is highly relevant to the prospect for future applications.

Humidity-Controlled Molecular Assembly and Photoisomerization Behavior with a Bubble-Assisted Patterning Approach.

Precise control of molecular assembly is of great significance in the application of functional molecules. This work has systematically investigated the humidity effect in bubble-assisted molecular assembly. This work finds humidity is critical in the evolution of the soft confined space, leading to the formation of microscale liquid confined space under high humidity, and nanoscale liquid confined space under low humidity. It is also revealed that the differences in surface wettability and adhesion play the key role. Consequently, a flat pattern with thermodynamically favorable ordered structure and a sharp pattern with dynamically favorable disordered structure are achieved, which show different solid-state photoisomerization behaviors and photoresponsiveness. Interestingly, conductivity of sharp pattern with disordered structure is higher than that of flat pattern with layered ordered structure due to electronic transport mechanism of different spatial dimensions. This work opens a new way for manipulating the molecular self-assembly to control the morphology and function of molecular patterns.

Thiazolylazopyrazoles as Nonsymmetric Bis-Heteroaryl Azo Switches: High-Yield Visible-Light Photoisomerization and Increased Z-Isomer Stability by o-Carbonylation.

Following the progress on mono-heteroaryl azo switches (Het-N=N-Ph), a few bis-heteroaryl azo switches (Het-N=N-Het) have been studied recently, whereas the nonsymmetric bis-heteroaryl ones (Het1 -N=N-Het2 ) that can combine the respective merits of each heterocycle, have received little attention. Here we report thiazolylazopyrazoles as nonsymmetric bis-heteroaryl azo switches that combine the visible-light switching character of the thiazole ring and the ease of o-substitution of the pyrazole ring. Thiazolylazopyrazoles can achieve (near-)quantitative visible-light isomerization in both directions and long Z-isomer thermal half-lives of several days. In contrast to the drastically destabilizing effect of o-methylation, o-carbonylation of the pyrazole ring can remarkably stabilize Z isomers by inducing attractive intramolecular interactions (dispersion, C-H⋅⋅⋅N bond, and lone-pair⋅⋅⋅π interaction). Our work highlights the importance of the rational combination of two heterocycles and suitable structural substitution in developing bis-heteroaryl azo switches.

SO2-Driven In Situ Formation of Superstable Hg3Se2Cl2 for Effective Flue Gas Mercury Removal.

Flue gas mercury removal is mandatory for decreasing global mercury background concentration and ecosystem protection, but it severely suffers from the instability of traditional demercury products (e.g., HgCl2, HgO, HgS, and HgSe). Herein, we demonstrate a superstable Hg3Se2Cl2 compound, which offers a promising next-generation flue gas mercury removal strategy. Theoretical calculations revealed a superstable Hg bonding structure in Hg3Se2Cl2, with the highest mercury dissociation energy (4.71 eV) among all known mercury compounds. Experiments demonstrate its unprecedentedly high thermal stability (>400 °C) and strong acid resistance (5% H2SO4). The Hg3Se2Cl2 compound could be produced via the reduction of SeO32- to nascent active Se0 by the flue gas component SO2 and the subsequent combination of Se0 with Hg0 and Cl- ions or HgCl2. During a laboratory-simulated experiment, this Hg3Se2Cl2-based strategy achieves >96% removal efficiencies of both Hg0 and HgCl2 enabling nearly zero Hg0 re-emission. As expected, real mercury removal efficiency under Se-rich industrial flue gas conditions is much more efficient than Se-poor counterparts, confirming the feasibility of this Hg3Se2Cl2-based strategy for practical applications. This study sheds light on the importance of stable demercury products in flue gas mercury treatment and also provides a highly efficient and safe flue gas demercury strategy.

Efficient and Robust Molecular Solar Thermal Fabric for Personal Thermal Management.

Molecular solar thermal (MOST) materials, which can efficiently capture solar energy and release it as heat on demand, are promising candidates for future personal thermal management (PTM) applications, preferably in the form of fabrics. However, developing MOST fabrics with high energy-storage capacity and stable working performance remains a significant challenge because of the low energy density of the molecular materials and their leakage from the fabric. Here, an efficient and robust MOST fabric for PTM using azopyrazole-containing microcapsules with a deep-UV-filter shell is reported. The MOST fabric, which can co-harvest solar and thermal energy, achieves efficient photocharging and photo-discharging (>90% photoconversion), a high energy density of 2.5 kJ m-2 , and long-term storage sustainability at month scale. Moreover, it can undergo multiple cycles of washing, rubbing, and recharging without significant loss of energy-storage capacity. This MOST microcapsule strategy is easily used for the scalable production of a MOST fabric for solar thermal moxibustion. This achievement offers a promising route for the application of wearable MOST materials with high energy-storage performance and robustness in PTM.

Suppression of Rice Osa-miR444.2 Improves the Resistance to Sheath Blight in Rice Mediating through the Phytohormone Pathway.

MicroRNAs (miRNAs) are a class of conserved small RNA with a length of 21-24 nucleotides in eukaryotes, which are involved in development and defense responses against biotic and abiotic stresses. By RNA-seq, Osa-miR444b.2 was identified to be induced after Rhizoctonia solani (R. solani) infection. In order to clarify the function of Osa-miR444b.2 responding to R. solani infection in rice, transgenic lines over-expressing and knocking out Osa-miR444b.2 were generated in the background of susceptible cultivar Xu3 and resistant cultivar YSBR1, respectively. Over-expressing Osa-miR444b.2 resulted in compromised resistance to R. solani. In contrast, the knocking out Osa-miR444b.2 lines exhibited improved resistance to R. solani. Furthermore, knocking out Osa-miR444b.2 resulted in increased height, tillers, smaller panicle, and decreased 1000-grain weight and primary branches. However, the transgenic lines over-expressing Osa-miR444b.2 showed decreased primary branches and tillers, but increased panicle length. These results indicated that Osa-miR444b.2 was also involved in regulating the agronomic traits in rice. The RNA-seq assay revealed that Osa-miR444b.2 mainly regulated the resistance to rice sheath blight disease by affecting the expression of plant hormone signaling pathways-related genes such as ET and IAA, and transcription factors such as WRKYs and F-boxes. Together, our results suggest that Osa-miR444b.2 negatively mediated the resistance to R. solani in rice, which will contribute to the cultivation of sheath blight resistant varieties.

A rechargeable molecular solar thermal system below 0 °C.

An optimal temperature is crucial for a broad range of applications, from chemical transformations, electronics, and human comfort, to energy production and our whole planet. Photochemical molecular thermal energy storage systems coupled with phase change behavior (MOST-PCMs) offer unique opportunities to capture energy and regulate temperature. Here, we demonstrate how a series of visible-light-responsive azopyrazoles couple MOST and PCMs to provide energy capture and release below 0 °C. The system is charged by blue light at -1 °C, and discharges energy in the form of heat under green light irradiation. High energy density (0.25 MJ kg-1) is realized through co-harvesting visible-light energy and thermal energy from the environment through phase transitions. Coatings on glass with photo-controlled transparency are prepared as a demonstration of thermal regulation. The temperature difference between the coatings and the ice cold surroundings is up to 22.7 °C during the discharging process. This study illustrates molecular design principles that pave the way for MOST-PCMs that can store natural sunlight energy and ambient heat over a wide temperature range.

(Hetero)arylazo-1,2,3-triazoles: "Clicked" Photoswitches for Versatile Functionalization and Electronic Decoupling.

The development of light-responsive chemical systems often relies on the rational design and suitable incorporation of molecular photoswitches such as azobenzenes. Linking a photoswitch core with another π-conjugated molecular entity may give rise to intramolecular electronic coupling, which can dramatically impair the photoswitch function. Decoupling strategies have been developed based on additionally inserting a linker that can disrupt the through-bond electronic communication. Here we show that 1,2,3-triazole-a commonly used decoupling spacer-can be directly merged into the azoswitch core to construct a class of "self-decoupling" azoswitches called (hetero)arylazo-1,2,3-triazoles. Such azotriazole photoswitches are easily accessed and modularly functionalized by click chemistry. Their photoswitch property can be optimized by rational design of the substituent groups or heteroaryl rings, allowing (near-)quantitative E⇆Z photoisomerization yields and tunable Z-isomer thermal half-lives from days to years. Combined experimental and theoretical results demonstrate that the electronic structure of the photoswitch core is not substantially affected by various substituents attached to the 1,2,3-triazole unit, benefiting from its cross-conjugated nature. The combination of clickable synthesis, tunable photoswitch property, and self-decoupling ability makes (hetero)arylazo-1,2,3-triazoles intriguing molecular tools in developing photoresponsive systems with desired performance.

Fol-milR1, a pathogenicity factor of Fusarium oxysporum, confers tomato wilt disease resistance by impairing host immune responses.

Although it is well known that miRNAs play crucial roles in multiple biological processes, there is currently no evidence indicating that milRNAs from Fusarium oxysporum f. sp. lycopersici (Fol) interfere with tomato resistance during infection. Here, using sRNA-seq, we demonstrate that Fol-milR1, a trans-kingdom small RNA, is exported into tomato cells after infection. The knockout strain ∆Fol-milR1 displays attenuated pathogenicity to the susceptible tomato cultivar 'Moneymaker'. On the other hand, Fol-milR1 overexpression strains exhibit enhanced virulence against the resistant cultivar 'Motelle'. Several tomato mRNAs are predicted targets of Fol-milR1. Among these genes, Solyc06g007430 (encoding the CBL-interacting protein kinase, SlyFRG4) is regulated at the posttranscriptional level by Fol-milR1. Furthermore, SlyFRG4 loss-of-function alleles created using CRISPR/Cas9 in tomato ('Motelle') exhibit enhanced disease susceptibility to Fol, further supporting the idea that SlyFRG4 is essential for tomato wilt disease resistance. Notably, our results using immunoprecipitation with specific antiserum suggest that Fol-milR1 interferes with the host immunity machinery by binding to tomato ARGONAUTE 4a (SlyAGO4a). Furthermore, virus-induced gene silenced (VIGS) knock-down SlyAGO4a plants exhibit reduced susceptibility to Fol. Together, our findings support a model in which Fol-milR1 is an sRNA fungal effector that suppresses host immunity by silencing a disease resistance gene, thus providing a novel virulence strategy to achieve infection.

Azobispyrazole Family as Photoswitches Combining (Near-) Quantitative Bidirectional Isomerization and Widely Tunable Thermal Half-Lives from Hours to Years*.

Azobenzenes are classical molecular photoswitches that have been widely used. In recent endeavors of molecular design, replacing one or both phenyl rings with heteroaromatic rings has emerged as a strategy to expand molecular diversity and access improved photoswitching properties. Many mono-heteroaryl azo molecules with unique structures and/or properties have been developed, but the potential of bis-heteroaryl architectures is far from fully exploited. We report a family of azobispyrazoles, which combine (near-)quantitative bidirectional photoconversion and widely tunable Z-isomer thermal half-lives from hours to years. The two five-membered rings remarkably weaken the intramolecular steric hindrance, providing new possibilities for engineering the geometric and electronic structure of azo photoswitches. Azobispyrazoles generally exhibit twisted Z-isomers that facilitate complete Z→E photoisomerization, and their thermal stability can be broadly adjusted regardless of the twisted shape, overcoming the conflict between photoconversion (favored by the twisted shape) and Z-isomer stability (favored by the orthogonal shape) encountered by mono-heteroaryl azo switches.

Clinical significance of SQSTM1/P62 and nuclear factor-κB expression in pancreatic carcinoma.

BACKGROUND: Overexpression of SQSTM1 (sequestosome 1, P62) and nuclear factor-κB (NF-κB) plays an important role in the invasion and metastasis of a variety of malignant tumors. AIM: To explore the expression of P62 and NF-κB in pancreatic cancer and their relationship with clinicopathological features. METHODS: The expression levels of P62 and NF-κB were analyzed by immunohistochemistry with a tissue chip containing 40 cases of human pancreatic carcinoma. Then we analyzed the correlation among P62 expression, phospho-P65 expression, and clinicopathological features of pancreatic carcinoma samples. RESULTS: P62 expression was mainly observed in the cytoplasm of pancreatic carcinoma cells. Phosphorylated P65 (phospho-P65) was mainly expressed in the nucleus and cytoplasm of pancreatic carcinoma cells. There was a significant difference in P62 expression among T stages. And a significant difference in phosphor-P65 expression among pathology types was noted. In the cases with strongly positive P62 expression, significant differences were found in age. And there were significant differences in T stage and tumor-node-metastasis stage in the cases with strongly positive phosphor-P65 expression. CONCLUSION: In pancreatic carcinoma, P62 expression is significantly correlated with T stage. It may be a valuable malignant indicator for human pancreatic carcinoma.

Photochemical Phase Transitions Enable Coharvesting of Photon Energy and Ambient Heat for Energetic Molecular Solar Thermal Batteries That Upgrade Thermal Energy.

Discovering physicochemical principles for simultaneous harvesting of multiform energy from the environment will advance current sustainable energy technologies. Here we explore photochemical phase transitions-a photochemistry-thermophysics coupled regime-for coharvesting of solar and thermal energy. In particular, we show that photon energy and ambient heat can be stored together and released on demand as high-temperature heat, enabled by room-temperature photochemical crystal↔liquid transitions of engineered molecular photoswitches. Integrating the two forms of energy in single-component molecular materials is capable of providing energy capacity beyond that of traditional solar or thermal energy storage systems based solely on molecular photoisomerization or phase change, respectively. Significantly, the ambient heat that is harvested during photochemical melting into liquid of the low-melting-point, metastable isomer can be released as high-temperature heat by recrystallization of the high-melting-point, parent isomer. This reveals that photon energy drives the upgrading of thermal energy in such a hybrid energy system. Rationally designed small-molecule azo switches achieve high gravimetric energy densities of 0.3-0.4 MJ/kg with long-term storage stability. Rechargeable solar thermal battery devices are fabricated, which upon light triggering provide gravimetric power density of about 2.7 kW/kg and temperature increases of >20 °C in ambient environment. We further show their use as deicing coatings. Our work demonstrates a new concept of energy utilization-combining solar energy and low-grade heat into higher-grade heat-which unlocks the possibility of developing sustainable energy systems powered by a combination of natural sunlight and ambient heat.

Identification of integrin ß6 gene promoter and analysis of its transcription regulation in colon cancer cells.

BACKGROUND: The integrin ß6 gene, which is expressed in epithelial cancer, plays a pivotal role in various aspects of cancer progression. The present research for integrin ß6 regulation mainly focuses on the post-transcription and translation related regulation mechanism and its role in tumorigenesis. The mechanisms of how the integrin ß6 gene is regulated transcriptionally, and the promoter and transcription factors responsible for basic transcription of integrin ß6 gene remain unknown. AIM: To clone and characterize the integrin ß6 promoter. METHODS: Software analysis was used to predict the region of integrin ß6 promoter. Luciferase reporter plasmids, which contained the integrin ß6 promoter, were constructed. Element deletion analysis was performed to identify the location of core promoter and binding sites for transcription factors. RESULTS: The regulatory elements for the transcription of the integrin ß6 gene were located between -286 and -85 and contained binding sites for transcription factors such as STAT3 and Ets-1. CONCLUSION: For the first time, we found the region of ß6 core promoter and demonstrated the binding sites for transcription factors such as Ets-1 and STAT3, which are important for integrin ß6 promoter transcription activity. These findings are important for investigating the mechanism of integrin ß6 activation in cancer progression.