RESUMO
【Objective】 To provide reference for formulating relatively unified quality control strategies and meeting the requirements of homogenization construction of blood banks across Chongqing area by retrospectively analyzing sampling results of different blood components during the past two years in all levels of blood banks in Chongqing area. 【Methods】 The key quality data of blood components prepared by 6 blood banks in Chongqing were analyzed retrospectively. According to the issuing units to the clinical during the past two years, the research objects were selected as leukocyte-depleted suspended RBCs, cryoprecipitate, pathogen inactivated fresh frozen plasma(FFP) and apheresis platelets. The quality data of the above-mentioned blood components from January 2019 to June 2021 were collected and analyzed. 【Results】 For leukocyte-depleted suspended RBCs(1U)prepared by 5 blood banks, statistically significant differences in Hb, residual white blood cells and hemolysis rate at the end of storage, except for Hct, were noticed(P<0.05). For cryoprecipitate, the content of blood coagulation factor Ⅷ and fibrinogen were statistically different among 3 blood banks in 1U specification(P<0.05) and among 5 blood banks in 2U specification(P<0.05). For pathogen inactivated FFP, the content of blood coagulation factor Ⅷ, plasma proteins, and residual methylene blue were statistically different among 3 blood banks(P<0.05). For apheresis platelets, Plt, white/red blood cells contamination and pH at the end of storage were statistically different among 3 blood banks(P<0.05). 【Conclusion】 The quality data of blood components, prepared by different blood banks, meet the requirements of national standard, however, certain differences are existing among blood banks.Key points during the process of collection, preparation, storage and transportation need to be cleared and unified, so as to reduce the differences between each other, and determine the direction and basis for homogeneity construction in the next step.
RESUMO
【Objective】 To investigate the current situation concerning volume control of red blood cells in additive solution produced by blood service in Chongqing, and to lay a foundation for promoting the homogenization of preparation process of red blood cells in additive solution. 【Methods】 A questionnaire was designed to investigate the factors related to the preparation of red blood cells in additive solution. The questionnaire was sent by Chongqing Association of Blood Transfusion via E-mail to 18 blood services in the city, and the collected data was sorted, revised and analyzed by research team. 【Results】 A total of 18 blood services(including 1 blood center + 1 sub-center, 6 central blood stations and 11 central blood banks) returned the questionnaires. The results showed that there were differences among blood services across Chongqing, regarding the centrifugal parameters during preparation, the operation mode and monitoring situation of the capacity control during preparation, and the formulation of the capacity standard of red blood cells in additive solution etc. 【Conclusion】 The preparation process of red blood cells in additive solution, produced by Chongqing blood services, should be further standardized, and the capacity control method of this product in Chongqing should be gradually unified to achieve regional homogeneity and to ensure blood safety.
RESUMO
Objective To find the risk and hidden danger of blood bacterial contamination existence at present and to investigate the method for carrying out the bacterial contamination related quality monitoring.Methods According to the requirements of the blood collection and supplying related laws and regulations standards,the blood bacterial contamination situation was monitored by supervising the personnel during the blood collection and supplying,key equipments,key materials,environment monitoring and sterility test of blood products.Results The total eligible rate of quality monitoring indicators of blood bacterial contamination reached 99.8%,the eligible rate of blood products bacterial contamination monitoring was 100 %.Conclusion The hygiene quality of blood collection process and blood products all are in good condition.
RESUMO
Objective To investigate the causes of spinal tuberculosis retreatment and its surgical treatment strategy.Methods Between May 2010 and May 2014,96 patients with spinal tuberculosis who had been operated before were retreated.The dates of them were reviewed.There were 51 males and 45 females with mean age of 39.7 years.Deciding upon the revision surgical procedure should be determined by last operation approach,the direction of compression of spinal cord,the position of sinus and extent of foci.The retreated patients were compared with 481 unretreated patients in the following index including sex,age,duration of disease,focus range,nutrition,drug resistant tuberculosis,debridement,stability of instrumentation,postoperative regular chemotherapy,associated tuberculosis.Results The surgery duration time was 160-280 min,average 210 min,and the blood loss was 400-1500 ml,average 600 ml.The VAS score before the operation was 6-9 (average 7.5) and 1-3 (average 1.5) at the last follow-up,the difference was statistically significant.Neurological deficits in 21 patients clinically improved at least one grade according to the ASIA grading system at last follow-up.Kyphosis and scoliosis degrees were corrected significantly postoperatively and the correction was 9.5°±3.6° at the final follow-up.The average angle loss was 3.5°±1.1°.There was significant difference between the kyphosis angles preoperatively,postoperatively and final follow-up.Kirkaldy-Willis function score showed that the total fine rate was 88%.There were 35 patients whose tuberculosis bacterial culture and drug sensitive experiments suggested drug resistance.Wound healing delayed in 7 patients.24 cases had sinus formation,13 cases in which were healed after wound dressing,and 11 cases undertook operation again.Conclusion The causes of spinal tuberculosis retreatment include uncompleted debridement,drug resistant strains of tuberculosis,irregular postoperative anti-tubercular treatment,poor preoperative nutritional status and failure of spinal stability reconstruction.The key of successful revision surgery includes radical debridement,strut grafting with autologous iliac bone block,proper reconstruction of spinal stability,individualized chemotherapy according to the drug-resistance,and the appropriate use of irrigation and drainage postoperatively.
RESUMO
Objective To fabricate an anti?tuberculosis controlled drug release coating with Ti?PDA?PEG?PLGA?INH and to investigate its surface characteristics, in vivo and in vitro drug release behavior, and tissue biocompatibility. Methods 4?arm?polyethylene glycol (PEG) was synthesized first. Then cover the surface of titanium (Ti) with a layer of poly dopamine (PDA) by Michael addition reaction. Use porous starch and 4?arm?PEG as a carrier, load with isoniazid (INH), then attach to the surface of titanium by casting or sol?gel dip coating methods, and then cover with a layer of poly lactic?co?glycolic acid (PLGA) by the same method, to fabricate the Ti?PDA?PEG?PLGA?INH composite coating finally. The functional group of 4?arm?PEG was charac?terized by proton nuclear resonance spectroscopy (HNMR). The surface characteristics of Ti?PDA?PEG?PLGA?INH were evaluated by scanning electron microscope (SEM), while drug release behaviors were detected by high performance liquid chromatography (HPLC) and the cumulative release rate was calculated, and carry out the antibacterial performance in vitro. The animal model of femoral condyle bone defect was established in 25 New Zealand white rabbits. Titanium rods covered with PDA?PEG?PLGA?INH coating were implanted into defect area. INH concentrations were detected by HPLC in venous blood, muscle and bone tissue at each time point postoperatively. Another 12 rabbits were randomly divided into experimental group and control group, the experi?mental group was implanted with titanium tablets and titanium rods coated with PDA?PEG?PLGA?INH in the paraspinous muscle and left femoral condyles respectively, while the control group was implanted with a blank sheet of titanium tablets and titanium rods in the same place. Hematoxylin and Eosin Staining were used to observe the biocompatibility of the composite system in vivo at 28 and 56 days postoperatively. Results Ti?PDA?PEG?PLGA?INH controlled drug release coating uniformly distributed on the surface of plates and rods, with translucent form and smooth surface. In vitro INH release kinetics exhibited a short?burst release during the first 8h, and the cumulative release of the INH was about 65%. On the 9th day, the cumulative release of the INH was about 90%, and then the release tended to be flat, and the drug release behavior in vitro continued more than 20d. In vivo release test showed that the concentration of INH in vein blood, muscle and bone tissue around the composite system was increased steadi?ly postoperatively. On about the 28th day, the concentration reached the max. However, the INH concentrations in muscle and bone tissue around the composite system were still higher than the minimum inhibitory concentration (MIC) on the 56th day. The antibacterial test in vitro showed that the titanium tablets coated with PDA?PEG?PLGA?INH formed obvious bacterial inhibition zones. The pathological results indicated that mild inflammatory reaction was seen in the 4th week postoperatively, and the reac?tive capsule formed with loose connective tissue. In the 8th week postoperatively, there's no obvious inflammation occurred, and the reactive capsule became more dense and thicker. Conclusion The study successfully fabricated the Ti?PDA?PEG?PLGA?INH anti?tuberculosis controlled drug release coating, with reasonable release behavior both in vivo and in vitro, effective antibac?terial effect of Mycobacterium tuberculosis in vitro and good tissue biocompatibility, which is a potentially effective drug delivery system for spinal tuberculosis.
RESUMO
Objective To discuss the methods of the heat preservation performance monitoring of the blood transport case and to provide the technical support for the safety of blood transportation.Methods At the different environment temperature,the amount of the cold resource was decided by the mass ratio of cold resource to blood and the temperature was automatically recorded by the intelligent temperature chip continuously,to monitor the changes of each monitoring point in the blood transport case.Results When the mass ratio of cold resource to blood was fixed at 1∶6,the cold chain of the blood transport case could keep the tempera-ture of 2-10 ℃ for 8 hours at the environment temperature of 12 ℃,It could keep the temperature of 2-10 ℃ for 4.5 hours at the environment temperature of 25 ℃,and it could keep the temperature of 2-10 ℃ for 2 hours at the environment temperature of 44℃.Conclusion When the mass ratio of cold resource to blood is fixed,as the environment temperature changes,the available time that the blood transport case keeps with the cold-chain requirement varies according to the results of the heat preservation per-formance monitoring of the blood transport case.
RESUMO
Objective To evaluate the quality of pooled platelets leukocytes reduced after filtering out leukocytes using two man-ufacturers of leucocyte filters for pooled platelets and improving the preparation method.Methods Pooled platelets was prepared from 400 mL fresh whole blood by buffy coats(BC)method,after 1 6 h,(22±2)℃ holding period,pooled six bags of ABO-matched buffy coats.and then filtered with two manufacturers of leucocyte filter,divided into the control group and the experimental group. Before and after filtering,the numbers of platelet and leukocyte,pH,hypotonic shock response(HSR),platelet aggregation and CD62p expression were detected.Results Before filtering leukocytes,the platelet quality of two groups achieved the requirements of Chinese standards.The numbers of platelet and leukocyte,pH,CD62p expression(%)and platelet aggregation showed no signifi-cant difference between two groups(P >0.05).However,After filtering,the pH,platelet aggregation and the platelet recovery,the experimental group and the control group,were (6.53±0.60)vs(7.00±0.06)、(5.5±3.8)% vs (77.4±14.7)%,(86.8±4.3)%vs (90.6±2.7)%,showed significant differences (P 0.05).Conclusion The quality of pooled platelets leukocytes is reduced,after filte-ring out leukocytes with two manufacturers of leucocyte filters and improving the preparation method,achieves the requirements of Chinese standards.However,the leukocyte filters of experimental group might have influence on platelet aggregation and pH.
RESUMO
Objective To investigate the consistency of the results detected by different types of blood cell analyzer in the blood center .Methods On the basis of the calibration in each analyzer ,with the analyzer obtaining the excellent result in participating the external laboratory quality assessment hosted by the Ministry of Health as the reference ,the fresh blood samples were adopted to analyze other analyzers .Results For the analyzers after conducting the comparison ,the consistency and accuracy of the detection results were ensured .Conclusion After calibration in different types of blood cell analyzer ,the differences exist in the detection re‐sults .Periodically conducting the comparison among different types of instrument has very practical significance .