A new arthroscopic repair technique for triangular fibrocartilage complex using an intracapsular suture: an outside-in transfer all-inside repair.

BACKGROUND: Arthroscopic repair is a promising, minimally invasive surgical technique for patients with Palmer type 1B peripheral triangular fibrocartilage complex (TFCC) tears. Although several arthroscopic techniques are effective for repairing Palmer type 1B TFCC tears, some shortcomings remain. So, we report an arthroscopic repair technique for the treatment of Palmer type 1B Atzei class 1 TFCC tears using an intracapsular suture: an outside-in transfer all-inside repair. METHODS: A retrospective analysis of 38 Palmer type 1B TFCC injury patients admitted to our hospital were randomly divided into 2 groups. The group A was sutured from the outside to the inside, with a total of 21 cases; the group B was sutured with the new arthroscopic repair technique, with a total of 17 cases. Observe and compare the VAS scores and modified Mayo wrist function scores of all patients before 3, and 6 months after the operation and evaluate the incidence of thread knots in patients with different treatment methods. The methodology was performed an arthroscopic intracapsular suture using an outside-in transfer, all-inside repair technique, which is a modified method of the outside-in and all-inside technique using the needle of a 10-mL sterile syringe, for Palmer type 1B TFCC tears. A No. 2 polydioxanone suture was threaded through the needle and entered the wrist joint. Next, the needle was withdrawn carefully along the suture to the proximal tear ulnar surface of the TFCC and penetrated the TFCC, exiting the articular cavity surface of the ulnar side of the torn TFCC. Finally, arthroscopic knotting was performed. RESULTS: This new treatment was as effective as the previously arthroscopic techniques and had the advantages of no additional incision and decreased risk of operation-related complications. The incidence of thread knots in the group A (28.57%) was significantly higher than that in the group B (0%), and the difference was statistically significant (P = 0.024). There was no significant difference in VAS score and modified Mayo wrist function scores between the two groups (P > 0.05). CONCLUSIONS: The outside-in transfer, the all-inside repair technique is suitable for Palmer type 1B Atzei class 1 TFCC tears. We recommend this technique as a useful alternative to the conventional methods of repairing Palmer type 1B TFCC tears.

Chrono-moxibustion adjusts circadian rhythm of CLOCK and BMAL1 in adjuvant-induced arthritic rats.

OBJECTIVE: The clinical symptoms of rheumatoid arthritis (RA) have significant circadian rhythms, with morning stiffness and joint pain. Moxibustion is effective in the treatment of RA, while the underlying therapeutic mechanisms remain limited. Thus, we explored whether moxibustion could adjust the circadian rhythm of RA by modulating the core clock genes CLOCK and BMAL1 at the molecular level. METHODS: 144 Sprague Dawley rats were randomly divided into four groups: control group (group A), model group (group B), 7-9 am moxibustion treatment group (group C), and 5-7 pm moxibustion treatment group (group D). Each group was divided into 6 time points (0 am, 4 am, 8 am, 12 N, 6 pm, and 8 pm) with an equal number of rats at each time point. Except for group A, all rats were injected with Freund's Complete Adjuvant (FCA) 0.15 ml on the right foot pad to establish the RA model. The rats of the two moxibustion treatment groups were respectively subjected to moxibustion at 7-9 am and 5-7 pm. After 3 weeks of treatment, the tissues were collected at 6 time points during the next 24 hours. Quantitative reverse transcription-polymerase chain reaction (qRT-PCR) was used to test the mRNA expression of CLOCK and BMAL1 in the hypothalamus and synovial tissues. CLOCK and BMAL1 protein expression in synovial tissues were detected with western blot. RESULTS: Compared to group A, group B showed significantly down-regulated expression levels of CLOCK and BMLA1 at synovial tissue (P < 0.05), while no statistically significant difference was found in the hypothalamus (P > 0.05). The expression levels of CLOCK and BMLA1 were up-regulated in the moxibustion treatment groups in different tissues, especially in synovial tissue (P < 0.05) compared to group B. Nevertheless, no difference was observed between groups C and D (P > 0.05). CONCLUSIONS: Moxibustion could treat RA by modulating clock core genes CLOCK and BMAL1 to regulate the circadian rhythm. However, there was no significant difference between the 7-9 am moxibustion treatment group and the 5-7 pm moxibustion treatment group. This study provides a basis for research on moxibustion in the treatment of RA.

Combined Medial Plate and Intramedullary Nailing for the Fixation of Extra-Articular Proximal Tibial Fractures: a Biomechanics Study.

Purpose: The extra-articular proximal tibial fractures continue to have high malunion rates despite development in intramedullary nailing (IMN) technology. Combined plate and IMN fixation can increase mechanical stability. The purpose of this study was to investigate combined plate and IMN for the treatment of extra-articular proximal tibial fracture using a biomechanical model. Methods: A 10-mm defective osteotomy was created in the fourth-generation composite tibia to simulate extra-articular proximal tibial fractures (AO/OTA 41A2). The fractures were stabilized with IMN alone (IMN group), IMN with supplementary medial plate (M-IMN group), and IMN with supplementary lateral plate (L-IMN group). The biomechanical properties of each specimen were tested under axial compression loading, bending stress, and cyclic loading. The maximum displacement of the fragments and implant-bone construct failure was recorded. Results: The maximum displacement of the M-IMN group was significantly less than either the L-IMN or IMN group in both axial compression loading and bending stress (p < 0.05 for both comparisons). All specimens in the three groups survived in 10,000 cyclic loading without hardware deformation. The maximum stiffness of failure was similar between the M-IMN and L-IMN groups, but the IMN group was statistically lower than either the L-IMN or the IMN group (p < 0.05). Conclusion: The results indicated that combined medial plate and IMN fixation could effectively increase the mechanical stability of proximal tibial fractures.

Extracellular Vesicles in chondrogenesis and Cartilage regeneration.

Extracellular vesicles (EVs), mainly exosomes and microvesicles, are bilayer lipids containing biologically active information, including nucleic acids and proteins. They are involved in cell communication and signalling, mediating many biological functions including cell growth, migration and proliferation. Recently, EVs have received great attention in the field of tissue engineering and regenerative medicine. Many in vivo and in vitro studies have attempted to evaluate the chondrogenesis potential of these microstructures and their roles in cartilage regeneration. EVs derived from mesenchymal stem cells (MSCs) or chondrocytes have been found to induce chondrocyte proliferation and chondrogenic differentiation of stem cells in vitro. Preclinical studies have shown that exosomes derived from MSCs have promising results in cartilage repair and in cell-free therapy of osteoarthritis. This review will focus on the in vitro and in vivo chondrogenesis and cartilage regeneration of EVs as well as their potential in the treatment of osteoarthritis.

All-inside versus inside-out suture techniques in arthroscopic meniscus repair: A prospective randomized study protocol.

BACKGROUND: With advancements in our understanding of meniscal function, treatment options for meniscal injuries have evolved considerably over the past few decades. The aim of the current study was to compare the all-inside and inside-out techniques with regard to retear rate, functional outcomes, and perioperative complications in patients who had undergone arthroscopic meniscus repair. We hypothesized that there was no significant difference between the 2 groups in terms of postoperative outcomes after arthroscopic meniscus repair. METHODS: This study was a prospective randomized blinded study, with a parallel design and an allocation ratio of 1:1 for the treatment groups. This study was approved by the Institutional Review Board in our hospital and written informed consent was obtained from all subjects participating in the trial. It was carried out in accordance with the principles of the Helsinki Declaration. A total of 70 patients who meet inclusion criteria are randomized to either all-inside or inside-out group. The primary outcome measure was retear rate. Retear was determined by repeat arthroscopic evaluation of patients with follow-up for symptoms of persistent or new pain, catching, or locking that was possibly related to the meniscal repair. Secondary outcomes included disease-specific quality of life measurement with the Western Ontario Meniscal Evaluation Tool, range of motion, operative time, and adverse events at surgery or throughout the follow-up period. RESULTS: This study has limited inclusion and exclusion criteria and a well-controlled intervention. TRIAL REGISTRATION: This study protocol was registered in Research Registry (researchregistry5589).

Comparison of arthroscopic single-row and double-row repair in the treatment of rotator cuff tears: A protocol of cohort analysis.

BACKGROUND: Single-row (SR) and double-row (DR) techniques are 2 kinds of widely used approaches for the arthroscopic repair of rotator cuff. This retrospective clinical trial was performed to address the question of whether a DR rotator cuff anchor repair gives results superior to a SR anchor repair in clinical outcome scores and complication rates. METHODS: This study was performed and reported in accordance with the Strengthening the Reporting of Observational studies in Epidemiology checklist. We retrospectively reviewed our database, which was collected prospectively. From 2014 to 2017, 264 patients underwent arthroscopic rotator cuff repair by an experienced single shoulder surgeon with the SR and DR techniques. This study was approved by the institutional review board in our hospital and was registered in the Research Registry. Outcome measures included Constant-Murley score, muscle strength, patient satisfaction, passive range of motion, and retear rates. RESULTS: The hypothesis was that the DR technique would achieve better functional scores and fewer complications as compared to the SR technique in treatment of rotator cuff tears.