[2 + 2] cycloaddition and its photomechanical effects on 1D coordination polymers with reversible amide bonds and coordination site regulation.

Photo-responsive materials can convert light energy into mechanical energy, with great application potential in biomedicine, flexible electronic devices, and bionic systems. We combined reversible amide bonds, coordination site regulation, and coordination polymer (CP) self-assembly to synthesize two 1D photo-responsive CPs. Obvious photomechanical behavior was observed under UV irradiation. By combining the CPs with PVA, the mechanical stresses were amplified and macroscopic driving behavior was realized. In addition, two cyclobutane amide derivatives and a pair of cyclobutane carboxyl isomers were isolated through coordination bond destruction and amide bond hydrolysis. Therefore, photo-actuators and supramolecular synthesis in smart materials may serve as important clues.

Comparative Analysis of Proton Conductivity in Two Zn-Based MOFs Featuring Sulfate and Sulfonate Functional Groups.

Metal-organic frameworks (MOFs) have shown promising potential as proton-conducting materials due to their tunable structures and high porosity. In this study, two novel MOFs had been successfully synthesized, one containing sulfate groups (MOF-1; [Zn4(TIPE)2(SO4)4(H2O)]·5H2O) and the other containing sulfonate groups (MOF-2; [Zn2(TIPE)(5-sip)(NO3)0.66]·0.34NO3·17.5H2O) (TIPE = 1,1,2,2-tetrakis(4-(1H-imidazole-1-yl)phenyl)ethene, H35-sip = 5-sulfoisophthalicacid), and the effect of the two groups on the proton conductivity of Zn-based MOFs had been investigated and compared for the first time. The proton conductivity of these MOFs was systematically measured at different temperatures and humidity conditions. Remarkably, the results revealed significant differences in proton conductivity between the two sets of MOFs. At 90 °C and 98% RH, MOF-1 and MOF-2 achieved optimal proton conductivity of 4.48 × 10-3 and 5.69 × 10-2 S·cm-1, respectively. This was due to the structural differences arising from the presence of different functional groups, which subsequently affected the porosity and hydrophilicity, thereby influencing the proton conductivity. Overall, this comparative study revealed the influence of sulfate and sulfonate groups on the proton conductivity of Zn-based MOFs. This research provided a feasible idea for the development of advanced MOF materials with enhanced proton conductivity and opened up new possibilities for their application in proton devices.

Structure and properties of metal-organic frameworks modulated by sulfate ions.

Anions play a significant role in the construction of metal-organic frameworks (MOFs). Anions can affect coordination between metal ions and organic ligands, and the formation of crystal structures, thereby affecting the structure and properties of MOFs. Two novel 3D porous MOFs ({[Cd3(TIPE)2(SO4)1.6(H2O)2.4]·2.8OH·6.2H2O}n (MOF-1) and {[Cd3(TIPE)2(SO4)3(H2O)2]·10H2O}n (MOF-2)) were successfully synthesized, by introducing SO42- to design and adjust their structure and properties, in which the sulfate ions not only participated in coordination but also played a bridging role. Both MOF-1 and MOF-2 exhibited high stability and strong fluorescence properties, and their fluorescence properties also changed compared to those of previously reported 2D nonporous MOF-3 ({[Cd2(TIPE)2Cl3(ACN)]·CdCl3·3H2O}n) with an identical ligand. They could also be used in combination with MOF-3 to distinguish between Fe3+ and Cr2O72- ions, due to a change in their fluorescence properties. In this work, the structure was reshaped by introducing sulfate ions, and the role and function of the sulfate ions in the structure were studied, providing a feasible idea for the design and precise regulation of MOFs.

Functional Materials for Water Restoration: A "Fish Cage" for Efficient Capture of Pb(II) Ions.

In this work, a "fish cage" material for trapping Pb(II) ions has been successfully obtained, which is a novel clathrate functionalized metal-oganic framework (Cage-MOF) by introducing free adsorption sites (SO42-). The three-dimensional (3D) cage structure of Cage-MOF gives it a larger contact area and can capture "swimming fish" (Pb(II)) like a "fishing cage" in a water solution. This is the first high-efficiency adsorption material obtained by introducing free coordination groups. Cage-MOF not only has excellent water stability but also improves the selectivity and affinity for Pb(II) ions in water because of the presence of sulfate adsorption sites, and its adsorption capacity is as high as 806 mg/g. This work shows a novel and effective idea for the synthesis of water restoration materials.

Multifunctional O-phenanthroline silver(I) complexes for antitumor activity against colorectal adenocarcinoma cells and antimicrobial properties by multiple mechanisms.

A series of O-phenanthroline silver(I) complexes were synthesized and characterized by infrared (IR) spectroscopy, mass spectrometry (MS), 1H nuclear magnetic resonance (NMR) spectroscopy and single-crystal X-ray crystallography. The cytotoxicity of the silver(I) complex (P-131) was evaluated in the cancer cell lines HCT-116, HeLa, and MDA-MB-231 and the normal cell line LO2 via MTT assays. The 50% inhibition concentration (IC50) of P-131 on HCT116 cell line is 0.86 ± 0.03 µM. It is far lower than the IC50 value of cisplatin (9.08 ± 1.10 µM), the IC50 value of normal cell LO2 (76.20 ± 0.48 µM) is much higher than that of cisplatin (3.99 ± 0.74 µM), indicating that its anticancer effect is stronger than that of cisplatin, and its biological safety is greater than that of cisplatin. Furthermore, anticancer mechanistic studies showed that P-131 inhibited cell proliferation by blocking DNA synthesis and acted temporally on the nucleus in dividing HCT-116 cells. Moreover, P-131 increased intracellular reactive oxygen species (ROS) levels in a dose-dependent manner. Notably, 10 mg/kg P-131 showed better antitumor effects than oxaliplatin in an HCT116 human colorectal xenograft mouse model without inducing toxicity. Moreover, the microdilution broth method was used to evaluate the antimicrobial properties of P-131 against Pseudomonas aeruginosa and Candida albicans. A biofilm eradication study was also performed using the crystal violet method and confocal laser scanning microscopy.

(8-Hydroxyquinoline) Gallium(III) Complex with High Antineoplastic Efficacy for Treating Colon Cancer via Multiple Mechanisms.

A series of (8-hydroxyquinoline) gallium(III) complexes (CP-1-4) was synthesized and characterized by single X-ray crystallography and density functional theory (DFT) calculation. The cytotoxicity of the four gallium complexes toward a human nonsmall cell lung cancer cell line (A549), human colon cancer cell line (HCT116), and human normal hepatocyte cell line (LO2) was evaluated using MTT assays. CP-4 exhibited excellent cytotoxicity against HCT116 cancer cells (IC50 = 1.2 ± 0.3 µM) and lower toxicity than cisplatin and oxaliplatin. We also evaluated the anticancer mechanism studies in cell uptake, reactive oxygen species analysis, cell cycle, wound-healing, and Western blotting assays. The results showed that CP-4 affected the expression of DNA-related proteins, which led to the apoptosis of cancer cells. Moreover, molecular docking tests of CP-4 were performed to predict other binding sites and to confirm its higher binding force to disulfide isomerase (PDI) proteins. The emissive properties of CP-4 suggest that this complex can be used for colon cancer diagnosis and treatment, as well as in vivo imaging. These results also provide a foundation for the development of gallium complexes as potent anticancer agents.

Gallium Metal-Organic Nanoparticles with Albumin-Stabilized and Loaded Graphene for Enhanced Delivery to HCT116 Cells.

Background: Gallium (III) metal-organic complexes have been shown to have the ability to inhibit tumor growth, but the poor water solubility of many of the complexes precludes further application. The use of materials with high biocompatibility as drug delivery carriers for metal-organic complexes to enhance the bioavailability of the drug is a feasible approach. Methods: Here, we modified the ligands of gallium 8-hydroxyquinolinate complex with good clinical anticancer activity by replacing the 8-hydroxyquinoline ligands with 5-bromo-8-hydroxyquinoline (HBrQ), and the resulting Ga(III) + HBrQ complex had poor water solubility. Two biocompatible materials, bovine serum albumin (BSA) and graphene oxide (GO), were used to synthesize the corresponding Ga(III) + HBrQ complex nanoparticles (NPs) BSA/Ga/HBrQ NPs and GO/Ga/HBrQ NPs in different ways to enhance the drug delivery of the metal complex. Results: Both of BSA/Ga/HBrQ NPs and GO/Ga/HBrQ NPs can maintain stable existence in different solution states. In vitro cytotoxicity test showed that two nanomedicines had excellent anti-proliferation effect on HCT116 cells, which shown higher level of intracellular ROS and apoptosis ratio than that of cisplatin and oxaliplatin. In addition, the superior emissive properties of BSA/Ga/HBrQ NPs and GO/Ga/HBrQ NPs allow their use for in vivo imaging showing highly effective therapy in HCT116 tumor-bearing mouse models. Conclusion: The use of biocompatible materials for the preparation of NPs against poorly biocompatible metal-organic complexes to construct drug delivery systems is a promising strategy that can further improve drug delivery and therapeutic efficacy.

Two Novel Three-Dimensional Tetraphenylethylene-Based Rare Earth MOFs with Ultra-High Proton Conductivity and Performance Stability.

Invited for the cover of this issue are the groups of Lin Du and Qi-Hua Zhao at Yunnan University. The image depicts astronauts as protons moving along the hydrogen-bond network in the channel of Eu-ETTB/Gd-ETTB. Read the full text of the article at 10.1002/chem.202202154.

Anion-Controlled Assembly of a Silver-Responsive Bifunctional Coordination Polymer with Detection and Large Adsorption Capacity.

The recognition and adsorption of silver ions (Ag+) from industrial wastewater are necessary but still challenging. Herein, we constructed four Zn(II)-based coordination polymers (CPs), namely, [Zn(btap)2(NO3)2]n (1), [Zn(btap)(SO4)(H2O)3]n (2), {[Zn(btap)2(H2O)2]·(ClO4)2}n (3), and [Zn(btap)Cl2]n (4), by using 3,5-bis(triazol-1-yl)pyridine (btap) with different anionic Zn(II) salts. The crystal structures of 1-4, varying from one-dimensional beaded (1) and zigzag chain (2) to two-dimensional sql (3) and bex (4) typologies, were regulated by the coordination modes of btap and the counter-anions. The water stability, pH stability, thermostability, and luminescent properties of the CPs were investigated. The luminescence performances in a series of cations and anions were also explored. Considering the high density of chloride groups in the structure, 4 showed luminescence sensing for Ag+ [KSV = 9188.45 M-1 and a limit of detection (LOD) of 4.9 µM], as well as an excellent ability for Ag+ adsorption in aqueous solution (maximum adsorption capacity, 653.3 mg/g). Additionally, anti-interference experiments revealed that 4 had excellent recognition and adsorption capacities for Ag+ even when multiple ions coexisted. Moreover, XRD, EDS, and XPS analyses confirmed that the coordination of Ag+ with chloride groups in 4 resulted in excellent adsorption capacity and prevented ligand-to-ligand electron transfer, showing excellent detection ability. Suitable coordination sites were introduced to interact strongly with Ag+, along with detection and large adsorption capacity. Our strategy can effectively design and develop multifunctional CP-based materials, which are applicable in removal processes and environmental protection, by regulating anions in the self-assembly and introducing CP functional groups.

Two Novel Three-Dimensional Tetraphenylethylene-Based Rare Earth MOFs with Ultra-High Proton Conductivity and Performance Stability.

In this work, the two example rare earth-based metal-organic frameworks (LaIII -based MOFs), Eu-ETTB and Gd-ETTB, were obtained by self-assembly. Both materials showed extremely high proton conductivity, with the proton conductivity of Eu-ETTB being 1.53×10-2  S cm-1 at 98 % relative humidity (RH) and 85 °C and that of Gd-ETTB being 2.63×10-2  S cm-1 at 98 % RH and 75 °C. This was almost the best performance observed for three-dimensional porous MOFs without post-synthetic modification and was based on milder conditions than for most materials. Furthermore, cycle test experiments and continuous work tests showed that both materials had excellent performance both in terms of stability and durability. Water vapor adsorption experiments showed that a large number of water molecules are adsorbed the hydrogen-bond network's being rebuilt by the adsorbed water molecules in the pore channel and thus optimizing the channels for proton transfer explained the MOF's high performance.

A Novel Coordination Polymer as Adsorbent Used to Remove Hg(II) and Pb(II) from Water with Different Adsorption Mechanisms.

Under the hydrothermal condition, a new type of two-dimensional coordination polymer ([Cd(D-Cam)(3-bpdb)]n, Cd-CP) has been constructed. It is composed of D-(+)-Camphoric-Cd(II) (D-cam-Cd(II)) one-dimensional chain and bridging 1,4-bis(3-pyridyl)-2,3-diaza-1,3-butadiene (3-bpdb) ligands. Cd-CP has a good removal effect for Hg(II) and Pb(II), and the maximum adsorption capacity is 545 and 450 mg/g, respectively. Interestingly, thermodynamic studies have shown that the adsorption processes of Hg(II) and Pb(II) on Cd-CP use completely different thermodynamic mechanisms, in which the adsorption of Hg(II) is due to a strong electrostatic interaction with Cd-CP, while that of Pb(II) is through a weak coordination with Cd-CP. Moreover, Cd-CP has a higher affinity for Hg(II), and when Hg(II) and Pb(II) coexist, Cd-CP preferentially adsorbs Hg(II).

Highly efficient and selective capture Pb(II) through a novel metal-organic framework containing bifunctional groups.

The design and development of materials with a selective adsorption capacity for Pb(II) are very important for environmental governance and ecological safety. In this work, a novel 3D metal-organic framework ([Cd2H4L4Cl2SO4]·4H2O, Cd-MOF) is constructed using a multiple pyrazole heterocycles tetraphenylethylene-based ligand (H4L4) and CdSO4 which containing Pb(II) adsorption sites (SO42-). Studies have shown that the Cd-MOF has outstanding stability, and its maximum adsorption value of Pb(II) can be as high as 845.55 mg/g, which is higher than that of most MOFs or MOFs modified materials. It is worth emphasizing that the Cd-MOF have excellent recyclability due to the unique adsorption mechanism of the Cd-MOF. Thermodynamic studies have shown that Pb(II) adsorption of the Cd-MOF is a spontaneous endothermic process. Specific selective adsorption, exceptional stability and remarkable recyclability make the Cd-MOF a potential material for industrial capture and recovery of Pb(II) from water.

Anion-controlled Zn(II) coordination polymers with 1-(tetrazo-5-yl)-3-(triazo-1-yl) benzene as an assembling ligand: synthesis, characterization, and efficient detection of tryptophan in water.

Tryptophan regulates and participates in various physiological systems in the human body, and its excessive intake has harmful effects. Therefore, detecting and monitoring tryptophan in water and distinguishing it from other amino acids are necessary. In addition to their excellent luminescence, coordination polymer-based sensors have good stability and high sensitivity and selectivity for sensing applications. In this work, two luminescent coordination polymers (CPs), [Zn(ttb)Cl]n (1) and [Zn2(ttb)2(OH)(NO3)]n (2), were obtained through the solvothermal reaction of different Zn(II) salts with a rarely studied multidentate N-donor ligand, 1-(tetrazo-5-yl)-3-(triazo-1-yl) benzene (Httb). Crystallographic investigations revealed that the structure of 1 exhibits a 2D fes net with Cl- anions acting as terminal charge balancers, and that of 2 features a 3D ant net with NO3- anions in a rare monodentate bridging (µ2-O-η1:η1) mode. In terms of stability tests, 2 has better thermal and water stability than 1. Although both show good fluorescence performance, specific tryptophan detection, and excellent anti-interference ability, 2 has higher KSV (111 852.6 M-1), a lower limit of detection (LOD = 23.6 nM), and a better recovery rate than 1. Cytotoxicity experiments proved that 2 has extremely low toxicity and thus has great potential for in vivo detection. Therefore, CP 2 is a suitable candidate for advanced practical applications for the efficient sensing of tryptophan in water. The luminescence of the ligands was also calculated using DFT theory and further discussed through experiments. The quenching mechanism that occurs after tryptophan addition was explored through Hirshfeld surface analysis.

An AIE material with time-dependent luminescence conversion obtained by 2D coordination polymer modification via covalent post-synthetic modification.

In this study, we reported the covalent post-synthetic modification (PSM) of a luminescent complex to achieve aggregation-induced emission (AIE), prepared using the Schiff base reaction of TPE-CHO and HLC-NH2, denoted by HLC-NH2-TPE. HLC-NH2 formed a 2D luminescent complex which was constructed using 4,4'-diamino-[1,1'-biphenyl]-2,2'-dicarboxylic acid and zinc ions via a solvothermal reaction. HLC-NH2-TPE inherited the luminescence properties of HLC-NH2 and exhibited noticeable AIE properties in response to environmental viscosities and temperature changes. Interestingly, HLC-NH2-TPE displayed a time-dependent luminescence conversion phenomenon in a mixed solution of DMF/H2O (v : v/1 : 9).

Multiple Strategies to Fabricate a Highly Stable 2D CuIICuI-Organic Framework with High Proton Conductivity.

Using multifunctional organic ligands with multiple acidic groups (carboxylate and sulfonate groups) to synthesize metal-organic frameworks (MOFs) bearing effective H-bond networks is a promising strategy to obtain highly proton conductive materials. In this work, a highly stable two-dimensional MOF, [CuII5CuI2(µ3-OH)4(H2O)6(L)2(H2L)2]·3H2O (denoted as YCu161; H3L = 6-sulfonaphthalene-1,4-dicarboxylic acid) containing mixed-valence [CuII5CuI2(µ3-OH)4]8+ subunits, was successfully prepared. It exhibited excellent stability and temperature- and humidity-dependent proton conduction properties. Its optimal proton conductivity reached 1.84 × 10-3 S cm-1 at 90 °C and 98% relative humidity. On the basis of a crystal structure analysis, water vapor adsorption test results, and activation energy calculations, we deduced the proton conduction pathway and mechanism. Apparently, uncoordinated sulfonic and carboxyl groups and a network of abundant H-bonds inside the framework were responsible for the efficient proton transfer. Therefore, the strategy of selecting suitable bifunctional ligands to construct two-dimensional Cu-cluster-based MOFs with excellent proton conductivity is feasible.

Different Phenomena in Magnetic/Electrical Properties of Co(II) and Ni(II) Isomorphous MOFs.

Two unprecedented and stable metal-organic frameworks, {[Co2(H2O)2(L)(OH)]·2.5H2O·0.5DMF} n (1) and {[Ni2(H2O)2(L)(OH)]·1.75H2O} n (2), have been synthesized (H3L = 5-(5-carboxy-pyridin-3-yloxy)-isophthalic acid, DMF = N,N-dimethylformamide). Structural analysis shows that 1 and 2 are heteronuclear isomorphous, possessing a three-dimensional (3D) (4,8)-connected flu/fluorite topological framework formed through the interconnection of tetranuclear butterfly {M4(COO)6(OH)2} clusters and the ligands. Although the frameworks of these two compounds are similar, their magnetic properties are different. Compound 1 exhibits an antiferromagnetic interaction in the high-temperature region, while 2 shows a weak ferromagnetic interaction in the whole-temperature region. Furthermore, considering the presence of hydroxyl groups and water molecules in the frameworks, we tested their proton conductivity. The efficient proton transfer pathway in the framework endowed 1 and 2 with excellent proton conductivities of 9.07 × 10-5 and 1.29 × 10-4 S·cm-1 at 363 K and 98% relative humidity (RH), respectively.

Ilepcimide inhibited sodium channel activity in mouse hippocampal neurons.

Ilepcimide (ICM), a clinically effective antiepileptic drug, has been used in China for decades; however, its antiepileptic mechanism remains unclear. ICM is structurally similar to antiepileptic drug lamotrigine (LTG). LTG exerts its anticonvulsant effect by inhibiting voltage-gated Na+ channel (NaV) activity. Thus it is speculated that ICM also exert its antiepileptic activity by inhibiting sodium channel activity. We studied the inhibition of NaV activity by ICM in acutely isolated mouse hippocampal pyramidal neurons. We evaluated ICM-mediated tonic, concentration-dependent, and voltage-dependent inhibition of NaV, and the effects of ICM and LTG on NaV biophysical properties. Na+ currents in hippocampal pyramidal neurons were tonically inhibited by ICM in a concentration- and voltage-dependent manner. The half-maximal inhibitory concentration (IC50) of ICM at a holding potential (Vh) of -90 mV was higher than that at a Vh of -70 mV. Compared with the control groups, in the presence of 10 µM ICM, the current densities of Na+ channels were reduced, the half-maximal availability of the inactivation curve (V1/2) was shifted to more negative potentials, and the recovery from inactivation was delayed. These data can contribute to further investigation of the inhibitory effect of ICM on the sodium channel, suggesting that the main reason for the anticonvulsant effect of ICM is the small influx of sodium ions. ICM can prevent abnormal discharge of neurons, which may prevent epilepsy.

A novel Schiff base cobalt(III) complex induces a synergistic effect on cervical cancer cells by arresting early apoptosis stage.

A new schiff base cobalt(III) complex [N,N'-bis(2'-hydroxyphenylacetone)-o-ethanediamine] cobalt(III) (M3) has been synthesized and characterized by single X-ray crystallography. The cytotoxicity of complex M3 was evaluated against HeLa, LoVo, A549, A549/cis cancer cell lines, and the normal cell lines LO2 by MTT assays. The IC50 is in the range of 6.27-22.68 µM, which is somewhat lower than cisplatin on the basis of platinum molar concentration. Furthermore, anticancer mechanistic studies showed that the complex M3 inhibited cell proliferation by blocking DNA synthesis and then acted on nuclear division of HeLa cells over time. Moreover, western blot analysis indicated M3 dramatically decreased the target protein c-Myc and KLF5 expression levels, and activated many signaling pathways including ER stress, apoptosis, cell cycle and DNA damage in HeLa. M3 did not affect proteasomal activity.

A new Schiff base copper(II) complex induces cancer cell growth inhibition and apoptosis by multiple mechanisms.

A new Schiff base copper(II) complex [N,N'-bis(2'-hydroxyphenylacetone)-o-ethanediamine] copper (II) (M1) has been synthesized and characterized by single X-ray crystallography. The cytotoxicity of complex M1 was evaluated against HeLa, LoVo, A549, A549/cis cancer cell lines, and the normal cell lines LO2 and HUVEC, by MTT (3-(4,5-dimethylthiazoyl-2-yl)2,5-diphenyltetrazoliumbromide) assays. The IC50 (50% inhibition concentrations) is in the range of 5.13-11.68 µM, which is somewhat lower than cisplatin on the basis of platinum molar concentration. Furthermore, anticancer mechanistic studies showed that the complex M1 inhibited cell proliferation by blocking DNA synthesis and then acted on nuclear division of HeLa cells over time. Moreover, M1 increased intracellular ROS (Reactive oxygen species) levels in a dose-dependent manner. Western blot analysis indicated M1 dramatically decrease c-Myc transcription factor and KLF5 (Krüppel-like factor 5) protein expression levels in HeLa. M1 did not inhibit proteasomal activity. Finally, M1 induced DNA damages and activated the DNA damage repair pathways.

[2 + 2] cycloaddition reaction and luminescent sensing of Fe3+ and Cr2O72- ions by a cadmium-based coordination polymer.

A new cadmium-based coordination polymer (CP), [Cd3(bpe)2(ceba)2(fa)2(H2O)2]n (1; fa = formate anions), was constructed by solvothermal reactions of cadmium nitrates with trans-1,2-bis(4'-pyridyl)ethylene ligand (bpe) and 4-(1-carboxy-ethoxy)-benzoic acid (H2ceba). The [2 + 2] photodimerization reaction of CP 1 under UV irradiation generated the corresponding photoproduct [Cd3(rctt-tpcb)(ceba)2(fa)2(H2O)2]n (1a; rctt-tpcb = tetrakis(4-pyridyl)-cyclobutane) via a single-crystal-to-single-crystal (SCSC) transformation. Single crystal X-ray diffraction unveiled that CPs 1 and 1a have similar 2D layered structures, except that rctt-tpcb replaced a pair of bpe ligands in the latter. Furthermore, CPs 1 and 1a are good bifunctional luminescent sensors that can detect Fe3+ and Cr2O72- ions in a mixed medium of water and DMF and display high sensitivity, selectivity, and anti-jamming capability for the recognition of Fe3+ and Cr2O72- ions. Moreover, we also examine in detail the possible luminescent quenching mechanisms of 1 and 1a toward Fe3+ and Cr2O72- ions.