Tailoring Multiple Strengthening Phases to Achieve Superior High-Temperature Strength in Cast Mg-RE-Ag Alloys.

Mg alloys with excellent high-temperature mechanical properties are urgently desired to meet the design requirements of new-generation aircraft. Herein, novel cast Mg-10Gd-2Y-0.4Zn-0.2Ca-0.5Zr-xAg alloys were designed and prepared according to the advantages of multi-component alloying. The SEM and XRD results revealed that the as-cast microstructures contained α-Mg grains, ß, and Zr-containing phase. As Ag rose from 0 wt.% to 2.0 wt.%, the grain size was refined from 40.7 µm to 33.5 µm, and the ß phase significantly increased. The TEM observations revealed that the nano-scaled γ' phase could be induced to precipitate in the α-Mg matrix by the addition of Ag. The stacking sequence of lamellar γ' phases is ABCA. The multiple strengthening phases, including ß phase, γ' phases, and Zr-containing particles, were effectively tailored through alloying and synergistically enhanced the mechanical properties. The ultimate tensile strength increased from 154.0 ± 3.5 MPa to 231.0 ± 4.0 MPa at 548 K when Ag was added from 0 to 2.0 wt.%. Compared to the Ag-free alloy, the as-cast alloy containing 2.0 wt.% Ag exhibited a minor reduction in ultimate tensile strength (7.0 ± 4.0 MPa) from 498 K to 548 K. The excellent high-temperature performance of the newly developed Mg-RE-Ag alloy has great value in promoting the use of Mg alloys in aviation industries.

Lanthanide-Polyoxometalate-Based Film with Reversible Photochromism and Luminescent Switching Properties for Erasable Inkless Security Printing.

Security printing is of the utmost importance in the information era. However, the excessive use of inks and paper still faces many economic and environmental issues. Thus, developing erasable inkless security printing materials is a remarkable strategy to save resources, protect the environment, and improve information security. To this endeavor, a photoresponsive lanthanide-polyoxometalate-doped gelatin film with high transparency was developed through the solution casting method. Attenuated total reflection Fourier-transform infrared spectroscopy confirmed the electrostatic and hydrogen bond interactions between gelatin and lanthanide-polyoxometalate. Absorption spectra, luminescent spectra, and digital images indicated that the film displayed reversible photochromism behavior and was accompanied by luminescent switching property upon exposure to UV irradiation and oxygen (in the dark) alternately, which allowed its potential application as a reprintable medium for inkless security printing. The printed information can be erased upon exposure to oxygen in the dark, and the film can be reused for printing again. The film exhibited excellent erasability, reprintability, renewability, and low toxicity. In addition, multiple encryption strategies were designed to improve information security. This work offers an attractive alternative strategy for constructing a reprintable film for inkless security printing in terms of simplifying the preparation process, saving resources, and protecting the environment.

Targeting GPR65 alleviates hepatic inflammation and fibrosis by suppressing the JNK and NF-κB pathways.

BACKGROUND: G-protein coupled receptors (GPCRs) are recognized as attractive targets for drug therapy. However, it remains poorly understood how GPCRs, except for a few chemokine receptors, regulate the progression of liver fibrosis. Here, we aimed to reveal the role of GPR65, a proton-sensing receptor, in liver fibrosis and to elucidate the underlying mechanism. METHODS: The expression level of GPR65 was evaluated in both human and mouse fibrotic livers. Furthermore, Gpr65-deficient mice were treated with either bile duct ligation (BDL) for 21 d or carbon tetrachloride (CCl4) for 8 weeks to investigate the role of GPR65 in liver fibrosis. A combination of experimental approaches, including Western blotting, quantitative real-time reverse transcription­polymerase chain reaction (qRT-PCR), and enzyme-linked immunosorbent assay (ELISA), confocal microscopy and rescue studies, were used to explore the underlying mechanisms of GPR65's action in liver fibrosis. Additionally, the therapeutic potential of GPR65 inhibitor in the development of liver fibrosis was investigated. RESULTS: We found that hepatic macrophages (HMs)-enriched GPR65 was upregulated in both human and mouse fibrotic livers. Moreover, knockout of Gpr65 significantly alleviated BDL- and CCl4-induced liver inflammation, injury and fibrosis in vivo, and mouse bone marrow transplantation (BMT) experiments further demonstrated that the protective effect of Gpr65 knockout is primarily mediated by bone marrow-derived macrophages (BMMs). Additionally, in vitro data demonstrated that Gpr65 silencing and GPR65 antagonist inhibited, while GPR65 overexpression and application of GPR65 endogenous and exogenous agonists enhanced the expression and release of tumor necrosis factor-α (TNF-α), interleukin-6 (IL-6) and transforming growth factor-ß (TGF-ß), all of which subsequently promoted the activation of hepatic stellate cells (HSCs) and the damage of hepatocytes (HCs). Mechanistically, GPR65 overexpression, the acidic pH and GPR65 exogenous agonist induced up-regulation of TNF-α and IL-6 via the Gαq-Ca2+-JNK/NF-κB pathways, while promoted the expression of TGF-ß through the Gαq-Ca2+-MLK3-MKK7-JNK pathway. Notably, pharmacological GPR65 inhibition retarded the development of inflammation, HCs injury and fibrosis in vivo. CONCLUSIONS: GPR65 is a major regulator that modulates the progression of liver fibrosis. Thus, targeting GPR65 could be an effective therapeutic strategy for the prevention of liver fibrosis.

lncRNA Helf promotes hepatic inflammation and fibrosis by interacting with PTBP1 to facilitate PIK3R5 mRNA stabilization.

BACKGROUND: Hepatic fibrosis is a common consequence of chronic liver diseases without approved antifibrotic therapies. Long noncoding RNAs (lncRNAs) play an important role in various pathophysiological processes. However, the functions of certain lncRNAs involved in mediating the antifibrotic role remain largely unclear. METHODS: The RNA level of lnc-High Expressed in Liver Fibrosis (Helf) was detected in both mouse and human fibrotic livers. Furthermore, lnc-Helf-silenced mice were treated with carbon tetrachloride (CCl4) or bile duct ligation (BDL) to investigate the function of lnc-Helf in liver fibrosis. RESULTS: We found that lnc-Helf has significantly higher expression in human and mouse fibrotic livers as well as M1 polarized hepatic macrophages (HMs) and activated hepatic stellate cells (HSCs). In vivo studies showed that silencing lnc-Helf by AAV8 vector alleviates CCl4- and BDL-induced hepatic inflammation and fibrosis. Furthermore, in vitro experiments revealed that lnc-Helf promotes HSCs activation and proliferation, as well as HMs M1 polarization and proliferation in the absence or presence of cytokine stimulation. Mechanistically, our data illustrated that lnc-Helf interacts with RNA binding protein PTBP1 to promote its interaction with PIK3R5 mRNA, resulting in increased stability and activating the AKT pathway, thus promoting HSCs and HMs activation and proliferation, which augments hepatic inflammation and fibrosis. CONCLUSION: Our results unveil a lnc-Helf/PTBP1/PIK3R5/AKT feedforward, amplifying signaling that exacerbates the process of hepatic inflammation and fibrosis, thus providing a possible therapeutic strategy for hepatic fibrosis.

Effect of Annealing Temperature on the Microstructure and Mechanical Properties of CoCrFeNiNb0.2Mo0.2 High Entropy Alloy.

Strengthening the CoCrFeNi high entropy alloy with a face-center cubic structure has become a research prospect in the last decade. Alloying with double elements, Nb and Mo, is an effective method. In this paper, to further enhance the strength of the Nb and Mo contained high entropy alloy, CoCrFeNiNb0.2Mo0.2 was annealing treated at different temperatures for 24 h. As a result, a new kind of Cr2Nb type nano-scale precipitate with a hexagonal close-packed structure was formed, which is semi-coherent with the matrix. Moreover, by adjusting the annealing temperature, the precipitate was tailored with a considerable quantity and fine size. The best overall mechanical properties were achieved in the alloy annealed at 700 °C. The yield strength, ultimate tensile strength, and elongation are 727 MPa, 1.05 GPa, and 8.38%, respectively. The fracture mode of the annealed alloy is a mixture of cleavage and necking-featured ductile fracture. The approach employed in this study offers a theoretical foundation for enhancing the mechanical properties of face-centered cubic high entropy alloys via annealing treatment.

Strengthening of Mg Alloy with Multiple RE Elements with Ag and Zn Doping via Heat Treatment.

Strengthening Mg alloys with rare earth elements has been a research focus for several decades. To minimize the usage of rare earth elements while enhancing mechanical properties, we adopted the strategy of alloying with multiple rare earth elements, namely Gd, Y, Nd, and Sm. Additionally, to promote the precipitation of basal precipitate, Ag and Zn doping was also induced. Thus, we designed a new cast Mg-2Gd-2Y-2Nd-2Sm-1Ag-1Zn-0.5Zr (wt.%) alloy. The microstructure of the alloy and its relevance to mechanical properties in various heat treatment conditions were investigated. After undergoing a heat treatment process, the alloy demonstrated exceptional mechanical properties, with a yield strength of 228 MPa and an ultimate tensile strength of 330 MPa achieved through peak-aging for 72 h at 200 °C. The excellent tensile properties are due to the synergistic effect of basal γ″ precipitate and prismatic ß' precipitate. In its as-cast state, its primary mode of fracture is inter-granular, whereas in the solid-solution and peak-aging conditions, the predominant mode of fracture is a mixture of trans-granular and inter-granular fractures.

Effect of Solution Treatment Time on Microstructure Evolution and Properties of Mg-3Y-4Nd-2Al Alloy.

In order to explore the microstructure evolution of an Mg-RE alloy refined by Al during solution treatment, an Mg-3Y-4Nd-2Al alloy was treated at 545 °C for different time periods. Phase evolution of the alloy was investigated. After solution treatment, the Mg-RE eutectic phase in the Mg-3Y-4Nd-2Al alloy dissolves, the granular Al2RE phase does not change, the acicular Al11RE3 phase breaks into the short rod-like Al2RE phase, and the lamellar Al2RE phase precipitates in the grains. With the extension of solution time, the precipitated phase of the lamellar Al2RE increased at first and then decreased, and its orientation relationship with the matrix is <112>Al2RE//<21¯1¯0>Mg and {111}Al2RE//{0002}Mg. The undissolved granular Al2RE phase can improve the thermal stability of the alloy grain by pinning the grain boundary, and the grain size did not change after solution treatment. Solution treatment significantly improved the plasticity of the alloy. After 48 h of solution treatment, the elongation increased to 17.5% from 8.5% in the as-cast state.

Comparison between Transpancreatic Sphincterotomy and Needle-Knife Precut in Difficult Cannulation of Endoscopic Retrograde Cholangiopancreatography: An Up-To-Date Meta-Analysis and Systematic Review.

BACKGROUND: Selective cannulation, which is essential for endoscopic retrograde cholangiopancreatography (ERCP), may be difficult. The aim of this study was to compare transpancreatic sphincterotomy (TPS) and needle-knife precut (NKP) in difficult cannulation during ERCP. METHODS: PubMed, Embase, Web of Science, the Cochrane Central Register of Controlled Trials, and ClinicalTrials.gov were searched for relevant studies from January 1990 to April 2022. A meta-analysis focusing on cannulation success and post-ERCP complications was performed using Review Manager. RESULTS: Seventeen eligible studies involving 2,340 patients were included. Our results showed that the TPS group had a higher cannulation success rate (odds ratio [OR] 0.48, 95% confidence interval [CI] 0.27-0.87, p = 0.02) and less bleeding (OR 1.94, 95% CI: 1.09-3.47, p = 0.03) compared with the NKP group. There was no significant difference between NKP and TPS in the rates of post-ERCP pancreatitis (OR 0.83, 95% CI: 0.59-1.18, p = 0.30), perforation (OR 2.04, 95% CI: 0.69-6.03, p = 0.20), and adverse events (OR 1.29, 95% CI: 0.94-1.77, p = 0.12). CONCLUSION: TPS appears to be associated with a higher cannulation success rate and less bleeding than those with NKP, with equal post-ERCP pancreatitis, perforation, and adverse event rates between TPS and NKP. Further large-scale trials are warranted to support our findings.

Microstructure and Mechanical Properties of EK30 Alloy Synergistically Reinforced by Ag Alloying and Hot Extrusion for Aerospace Applications.

Enhancing the mechanical properties of magnesium alloys to meet the urgent need for their lightweight applications in the aerospace field has always been a great challenge. Herein, the effect of Ag on the microstructure and tensile properties of the Mg-2.5Nd-1.0Sm-0.4Zn-0.1Ca-0.5Zr (EK30) alloy prepared by integrated extrusion and equal-channel angular pressing is studied. The microstructure of as-extruded alloys consists of α-Mg grains and the ß phase. The addition of Ag increases the ß-phase content. The ß phase can promote dynamic recrystallization by inducing a particle-stimulated nucleation mechanism and inhibiting grain growth, which leads to grain refinement and texture weakening. At 250 °C, the ultimate tensile strength of the EK30-2.0Ag alloy (225.9 MPa) increased by 13.8% compared to the Ag-free alloy (198.4 MPa). When the tensile temperature increased from 25 °C to 250 °C, the ultimate tensile strength of the EK30-2.0Ag alloy decreased by 14.3%, from 263.7 MPa to 225.9 MPa. Notably, the addition of Ag slightly reduced the elongation of the alloy at 250 °C; the elongations of the EK30-2.0Ag alloy and the EK30 alloy are 41.5% and 37.0%, respectively. The elongation of the EK30-2.0Ag alloy increased from 22.7% at 25 °C to 52.7% at 275 °C. All alloy tensile fractures exhibited typical plastic fracture characteristics. This study provides an effective way to enhance the high-temperature mechanical properties of magnesium alloys by Ag alloying and a special severe plastic deformation method.

LncRNA Airn maintains LSEC differentiation to alleviate liver fibrosis via the KLF2-eNOS-sGC pathway.

BACKGROUND: Long noncoding RNAs (lncRNAs) have emerged as important regulators in a variety of human diseases. The dysregulation of liver sinusoidal endothelial cell (LSEC) phenotype is a critical early event in the fibrotic process. However, the biological function of lncRNAs in LSEC still remains unclear. METHODS: The expression level of lncRNA Airn was evaluated in both human fibrotic livers and serums, as well as mouse fibrotic livers. Gain- and loss-of-function experiments were performed to detect the effect of Airn on LSEC differentiation and hepatic stellate cell (HSC) activation in liver fibrosis. Furthermore, RIP, RNA pull-down-immunoblotting, and ChIP experiments were performed to explore the underlying mechanisms of Airn. RESULTS: We have identified Airn was significantly upregulated in liver tissues and LSEC of carbon tetrachloride (CCl4)-induced liver fibrosis mouse model. Moreover, the expression of AIRN in fibrotic human liver tissues and serums was remarkably increased compared with healthy controls. In vivo studies showed that Airn deficiency aggravated CCl4- and bile duct ligation (BDL)-induced liver fibrosis, while Airn over-expression by AAV8 alleviated CCl4-induced liver fibrosis. Furthermore, we revealed that Airn maintained LSEC differentiation in vivo and in vitro. Additionally, Airn inhibited HSC activation indirectly by regulating LSEC differentiation and promoted hepatocyte (HC) proliferation by increasing paracrine secretion of Wnt2a and HGF from LSEC. Mechanistically, Airn interacted with EZH2 to maintain LSEC differentiation through KLF2-eNOS-sGC pathway, thereby maintaining HSC quiescence and promoting HC proliferation. CONCLUSIONS: Our work identified that Airn is beneficial to liver fibrosis by maintaining LSEC differentiation and might be a serum biomarker for liver fibrogenesis.

Safety of early same-admission laparoscopic cholecystectomy for acute mild biliary pancreatitis. A retrospective study for acute pancreatitis.

INTRODUCTION: As the standard procedure for the surgical treatment for gallbladder stones, we investigated the controversy surrounding the optimal time for laparoscopic cholecystectomy (LC) for acute mild biliary pancreatitis (AMBP). AIM: To further address the optimal timing of LC, we conducted a retrospective study comparing early (< 72 h, group I) with delayed (> 72 h, group II) LC for AMBP during the same admission. MATERIAL AND METHODS: This retrospective study included medical records of all patients who were admitted with a diagnosis of acute mild biliary pancreatitis at Dongyang People's Hospital from July 2011 to June 2019. RESULTS: A total of 119 patients were divided into an early LC group (group I; 52 patients) and a control group (group II; 67 patients). Conversion to open cholecystectomy (COC) was performed in 17 patients (6 patients in group I and 11 patients in group II, p = 0.62). There were no significant differences in terms of estimated blood loss and duration of surgery (p = 0.08 and p = 0.64, respectively). The overall hospital stay in group I was significantly shorter than in group II (10.86 ±3.21 vs. 13.29 ±4.51 days, p = 0.001). Compared with postoperative bile leakage (p = 0.72) and postoperative morbidity (p = 0.97) and mortality, there were no significant differences between the groups. CONCLUSIONS: Early LC during the same admission is safe for acute mild biliary pancreatitis and has the advantage of shortening overall hospital stay. There was no significant increase in COC, bile duct injury, and complications.

Synthesis of In Situ ZrB2-SiC-ZrC Coating on ZrC-SiC Substrate by Reactive Plasma Spraying.

In situ synthesis feasibility of ZrB2-SiC-ZrC composite coatings on ZrC ceramics by reactive plasma spraying (RPS) was investigated. To help to understand the phase evolution during plasma spraying process, reaction behavior in the ZrH2-Si-B4C system was explored carefully by differential scanning calorimetry. The results indicated that the phase transformation sequence in the ZrH2-Si-B4C system could be described as ZrH1.66, Zr3O, ZrC, ZrB2, Zr2Si, ZrSi, and SiC. The prior formation of ZrC was due to high diffusion rate of C atoms from B4C. ZrB2 was produced above 1100 °C. As the temperature increased, SiC were finally formed by the reaction of ZrC with ZrSi and B4C. The RPS composite coatings mainly consisted of ZrB2, SiC, and ZrC phases, except for a small fraction of ZrO2 phase. The microstructural characterization exhibited more dense melted splats, which appears to increase gradually with the increase in spraying currents and distances. The coatings had typical lamellar structure and adhered to the substrate well. The microhardness values were higher than 1000 HV1, but there were few variations with varying spraying currents and distances.

Three-Dimensional Modeling of Segregation Behavior during Solidification of a Sn-6 wt.% Pb Alloy.

In this study, a three-dimensional (3D) solidification model was developed that uses a SOLA algorithm to solve momentum equations and accelerate iterative convergence. The macrosegregation behavior of a sand-cast Sn-6 wt.% Pb alloy was numerically investigated by the developed 3D model. The experiment was carried out for a casting with one side in contact with a graphite chill and the other sides in contact with resin sand. The necessary precision of in-house-developed codes was validated by comparisons with experimentally measured cooling curves and lead concentration distribution. The limitations of the model in fitting experimental results well were discussed. A comparative study between simulations in two-dimensional (2D) and 3D cavities showed that although the general distribution pattern of macrosegregation was slightly affected, the details regarding segregation degree, solute composition distribution over the solidifying domain, solidification time and fluid flow pattern were different. For 2D simulations without boundary walls, the convection behavior was less complicated, and the cooling process was slowed down both in the casting and in the mold.

Assessment of laparoscopic versus open distal pancreatectomy: a systematic review and meta-analysis.

BACKGROUND: The surgical benefits of open distal pancreatectomy (ODP) and laparoscopic distal pancreatectomy (LDP) as a treatment for pancreatic disease in the body or tail were compared. MATERIAL AND METHODS: We searched PubMed, ClinicalTrials.gov, Cochrane Central Register of Controlled Trials, and Web of Science from 1 August 1990 to 1 July 2019. Studies comparing total LDP and ODP were included. RESULTS: In total, we reviewed 30 studies covering 4040 subjects. The analysis displayed a similar incidence of CR-POPF and POPF between ODP and LDP groups. The findings indicate that LDP correlates with fewer total complications, lower estimated blood loss, shorter length of stay and shorter postoperative hospital stay. There was no significant difference in the operation time, R0 resection, postoperative hemorrhage, number of lymph nodes collected, reoperation, major complications, or mortality. CONCLUSIONS: Application of the International Study Group on Pancreatic Fistula (2017) criteria in this meta-analysis showed that LDP had surgical outcomes comparable with those of ODP. However, LDP has the benefits of causing a relatively lower estimated blood loss, a small number of total complications, and a shorter hospital stay. We, however, note that further high-quality and controlled trials are required to comprehensively compare these treatments.

Endoscopic versus percutaneous drainage for pancreatic fluid collection after pancreatic surgery: An up-to-date meta-analysis and systematic review.

Endoscopic ultrasound-guided drainage (EUSD) and percutaneous drainage (PD) have reportedly been used for postoperative pancreatic fluid collection (PFC). However, there is limited evidence regarding safety and efficacy in a comparison of EUSD and PD for postoperative PFC. We conducted a search of the databases PubMed, Embase, Web of Science, the Cochrane Central Register of Controlled Trials, and ClinicalTrials.gov, to August 2020. Studies comparing EUSD and PD for postoperative PFC were included. The outcomes included technical success, clinical success, adverse events, and recurrence of PFC.We included a total of 6 studies involving 247 patients in the current study. There was no significant difference between EUSD and PD in terms of technical success (odds ratio [OR] = 0.95; 95% confidence interval [CI]: 0.29-3.12; p = 0.94) and clinical success (OR = 1.36; 95% CI: 0.68-2.72; p = 0.39). PFC recurrence and adverse events were similar between the two groups (OR = 1.82; 95% CI: 0.75-4.37; p = 0.18 and OR = 0.78; 95% CI: 0.31-1.92; p = 0.58, respectively).This meta-analysis confirmed that EUSD has comparable safety and efficacy to PD for postoperative PFC. Additional high-quality studies are required in the future.

Effect of Al Content on Microstructure Evolution and Mechanical Properties of As-Cast Mg-11Gd-2Y-1Zn Alloy.

In the present paper, the Mg-11Gd-2Y-1Zn alloys with different Al addition were fabricated by the gravity permanent mold method. The effect of Al content on microstructure evolution and mechanical properties of as-cast Mg-11Gd-2Y-1Zn alloy was studied by metallographic microscope, scanning electron microscope, XRD and tensile testing. The experimental results showed that the microstructure of as-cast Mg-11Gd-2Y-1Zn alloy consisted of α-Mg phase and island-shaped Mg3 (RE, Zn) phase. When Al element was added, Al2RE phase and lamellar Mg12REZn (LPSO) phase were formed in the Mg-11Gd-2Y-1Zn alloy. With increasing Al content, LPSO phase and Mg3 (RE, Zn) phase gradually decreased, while Al2RE phase gradually increased. There were only α-Mg and Al2RE phases in the Mg-11Gd-2Y-1Zn-5Al alloy. With the increase of Al content, the grain size decreased firstly and then increased. When the Al content was 1 wt.%, the grain size of the alloy was the minimum value (28.9 µm). The ultimate tensile strength and elongation increased firstly and then decreased with increasing Al addition. And the fracture mode changed from intergranular fracture to transgranular fracture with increasing addition. When Al addition was 1 wt.%, the maximum ultimate tensile strength reached 225.6 MPa, and the elongation was 7.8%. When the content of Al element was 3 wt.%, the maximum elongation reached 10.2% and the ultimate tensile strength was 207.7 MPa.

Lanthanide Polyoxometalate Based Water-Jet Film with Reversible Luminescent Switching for Rewritable Security Printing.

Luminescent security printing is of particular importance in the information era. However, the use of conventional paper still carries a lot of economic and environmental issues. Therefore, developing new environmentally friendly security printing material with a low cost is imperative. To achieve the aforementioned goals, novel lanthanide polyoxometalate doped gelatin/glycerol films with high transparency, high strength, and good flexibility have been developed via a solution-casting method. The electrostatic interaction between zwitterionic gelatin and polyoxometalate was confirmed by attenuated total reflection Fourier transform infrared spectroscopy. Luminescent spectra and digital images indicated that the films exhibited reversible luminescent switching properties through association and dissociation of hydrogen bonds between glycerol and water molecules, allowing its potential application as water-jet rewritable paper for luminescent security printing. Furthermore, the printed information can be conveniently "erased" by heating, and the film can be reused for printing. The film exhibited excellent ability to be both rewritten and re-erased. A QR code pattern and hybrid printing were employed to improve the security of information. In addition, the rewritable films possessed excellent regeneration ability and low toxicity, as well as good stability against UV irradiation and organic solvents. The water-jet rewritable film based on lanthanide polyoxometalate for luminescent security printing, to the best of our knowledge, has not yet been reported up to date. This work provides an attractive alternative strategy on fabricating rewritable films for luminescent security printing in terms of cutting down the cost, simplifying the preparation process, and protecting the environment.

Enhanced Grain Refinement and Precipitation of the IEECAPed Mg-Sm-Zn-Zr Alloy by Nd Addition.

Achieving magnesium-rare earth alloys with excellent mechanical properties remains a challenging goal in the aerospace industry. The integrated extrusion and equal channel angular pressing were employed to refine grain and improve the mechanical properties of Mg-xNd-2.0Sm-0.4Zn-0.4Zr alloys. The effect of Nd element on microstructure and mechanical properties of the extruded and subsequently aged alloys were carried out by varying the amount of the Nd element from 0 wt.% to 2.5 wt.%. The optical microscopy results indicated that the grain size was remarkably refined by the addition of Nd element. The grain size decreased from 29.7 µm to 10.9 µm with increasing of the Nd element from 0 wt.% to 2.5 wt.%. The transmission electron microscopy results showed that the nano-scaled basal lamellar precipitates, prismatic lamellar precipitates and granular precipitates were formed in α-Mg matrix. The amount of the precipitates increased significantly by the addition of Nd. Moreover, the strength of the alloys significantly improved with Nd. Superior strength and considerable plasticity were obtained as the content of Nd element reached 2.0 wt.%, while the tensile strength of the Mg-2.0Nd-Sm-Zn-Zr alloy (315 ± 5 MPa) increased by 35.8% with respect to the Nd-free alloy (232 ± 3 MPa).

Influence of Solution Treatment Time on Precipitation Behavior and Mechanical Properties of Mg-2.0Nd-2.0Sm-0.4Zn-0.4Zr Alloy.

The effect of solution treatment time on the microstructure and mechanical properties of aged the Mg-2.0Nd-2.0Sm-0.4Zn-0.4Zr (wt.%) alloy were investigated to give full play to the performance of the alloy. As the solution treatment time increased from 2 h to 12 h at 788 K, the grain size of the solution-treated alloy significantly increased, and the network-like ß-Mg12(Nd, Sm, Zn) phase gradually dissolved into the α-Mg matrix. It should be noted that no obvious residual ß phase can be observed when the solution treatment time was more than 8 h. After the solution-treated alloy was further aged at 473 K for 18 h, a large number of nanoscale precipitates were observed in the α-Mg matrix. The solution treatment time was 2 h, the α-Mg matrix mainly consisted of spherical-shaped and basal plate-shaped precipitates. Upon the increase of solution treatment time to 8 h, the key strengthening phases transformed from spherical-shaped precipitates and basal plate-shaped precipitates to prismatic plate-shaped ß' precipitates. The orientation relationship between ß' precipitates and α-Mg matrix was (1¯10)ß' // (11¯00)α and [112]ß' // the [224¯3]α. Further increasing of solution treatment time from 8 h to 12 h, the key strengthening phases mainly were still ß' precipitates. The solution treatment of aged alloy was carried out at 788 K for 8 h, which achieved optimal ultimate tensile strength (UTS) of 261 ± 4.1 MPa, yield strength (YS) of 154 ± 1.5 MPa, and elongation of 5.8 ± 0.1%, respectively.

Relationship between serum total testosterone and prostate volume in aging men.

Total testosterone levels decline with age, while prostate volume and the prevalence of benign prostatic hyperplasia increase with age. We sought to investigate the correlation of serum testosterone levels with prostate volume in aging men. We analyzed clinical data obtained from 416 ostensibly healthy men who underwent routine health check-ups and recruited and collected data from these subjects 4 years later. We analyzed the correlation between prostate volume and relevant factors, as well as the correlation between changes in prostate volume and low testosterone over a 4-year period. Men with low testosterone had significantly larger prostate volume than those in the normal testosterone group (26.86 ± 8.75 vs. 24.06 ± 6.77 P = 0.02), and subjects with low testosterone had significantly higher levels of obesity-related factors, including waist circumference, body mass index, and insulin (all P < 0.001). After adjustment for age, testosterone level was negatively correlated with prostate volume (P = 0.004), and prostate volume and 4-year changes in prostate volume were associated with low testosterone. With increased testosterone level, prostate volume showed a significant linear decreasing trend. These findings provide evidence of the relationship between testosterone and prostate volume. Additional large studies are needed to confirm these preliminary results.