Self-Sorting of Interfacial Compatibility in MOF-Based Mixed Matrix Membranes.

Metal-organic framework (MOF)-based mixed matrix membranes (MMMs) have shown great promises to overcome the performance upper limit of polymeric membranes for various gas separation processes. However, the gas separation properties of the MMMs largely depend on the MOF-polymer interfacial compatibility which is a metric difficult to quantify. In most cases, whether a MOF filler and a polymer matrix make a good pair is not revealed until the gas transport experiments are performed. This is because there is a lack of characterization techniques to directly probe the MOF-polymer interfacial compatibility. In this work, we demonstrate a self-sorting method to rank the interface compatibility among several MOF-polymer pairs. By mixing one MOF with two polymers in an MMM, the demixing of two polymers will form two polymer domains. The MOF particles will preferably partition into the "preferred" polymer domain due to their higher interfacial affinity. By scanning different polymer pairs, a rank of MOF-polymer interfacial compatibility from high to low can be obtained. Moreover, based on this ranking, it was also found that a highly compatible MOF-polymer pair suggested by this method also corresponds to a more predictable MMM gas separation performance.

Encoding ordered structural complexity to covalent organic frameworks.

Installing different chemical entities onto crystalline frameworks with well-defined spatial distributions represents a viable approach to achieve ordered and complex synthetic materials. Herein, a covalent organic framework (COF-305) is constructed from tetrakis(4-aminophenyl)methane and 2,3-dimethoxyterephthalaldehyde, which has the largest unit cell and asymmetric unit among known COFs. The ordered complexity of COF-305 is embodied by nine different stereoisomers of its constituents showing specific sequences on topologically equivalent sites, which can be attributed to its building blocks deviating from their intrinsically preferred simple packing geometries in their molecular crystals to adapt to the framework formation. The insight provided by COF-305 supplements the principle of covalent reticular design from the perspective of non-covalent interactions and opens opportunities for pursuing complex chemical sequences in molecular frameworks.

Atomic observation and structural evolution of covalent organic framework rotamers.

Dynamic 3D covalent organic frameworks (COFs) have shown concerted structural transformation and adaptive gas adsorption due to the conformational diversity of organic linkers. However, the isolation and observation of COF rotamers constitute undergoing challenges due to their comparable free energy and subtle rotational energy barrier. Here, we report the atomic-level observation and structural evolution of COF rotamers by cryo-3D electron diffraction and synchrotron powder X-ray diffraction. Specifically, we optimize the crystallinity and morphology of COF-320 to manifest its coherent dynamic responses upon adaptive inclusion of guest molecules. We observe a significant crystal expansion of 29 vol% upon hydration and a giant swelling with volume change up to 78 vol% upon solvation. We record the structural evolution from a non-porous contracted phase to two narrow-pore intermediate phases and the fully opened expanded phase using n-butane as a stabilizing probe at ambient conditions. We uncover the rotational freedom of biphenylene giving rise to significant conformational changes on the diimine motifs from synclinal to syn-periplanar and anticlinal rotamers. We illustrate the 10-fold increment of pore volumes and 100% enhancement of methane uptake capacity of COF-320 at 100 bar and 298 K. The present findings shed light on the design of smarter organic porous materials to maximize host-guest interaction and boost gas uptake capacity through progressive structural transformation.

Overall Spontaneous Water Splitting for Calcium Bismuthate Ca(BiO2)2: Flexible-Electronic-Controlled Band Edge Position and Adsorption-Site-Modulated Bond Strength.

Eco-friendly photocatalysts for water splitting, highly efficient in oxygen/hydrogen evolution reactions, hold great promise for the storage of inexhaustible solar energy and address environmental challenges. However, current common photocatalysts rarely exhibit both H2 and O2 production performances unless some regulatory measures, such as strain engineering, are implemented. Additionally, the extensive utilization of flexible electronics remains constrained by their high Young's modulus. Herein, on the basis of density functional theory calculations, we identify a novel spontaneous oxygen-producing two-dimensional Ca(BiO2)2 material, which can efficiently regulate the electronic structures of the surface active sites, optimize the reaction pathways, reduce the reaction energy barriers, and boost the overall water-splitting activity through biaxial strain modulation. In detail, an unstrained Ca(BiO2)2 monolayer not only possesses a suitable band gap value (2.02 eV) to fulfill the photocatalytic water-splitting band edge relationships but also holds favorable transport properties, excellent optical absorption across the visible light spectrum, and spontaneous oxygen production under neutral conditions. More excitingly, under application of a 7% biaxial tensile strain modulation with an ideal biaxial strength of 32.35 GPa nm, the Ca(BiO2)2 monolayer not only maintains its structural integrity but also exhibits a completely spontaneous reaction for photocatalytic hydrogen precipitation with superior optical absorption. This can primarily be attributed to the substantial reduction of the potential barrier through strain engineering as well as the weakening of bond energy resulting from changes of the adsorption site as calculated by crystal orbital Hamiltonian population analysis. This flexible stretchable electronic modulated the photocatalyst behavior and bond energy of O-Bi and O-Ca interactions, offering outstanding potential for photocatalytic water spontaneous oxygen and hydrogen evolution among all of the reported metal oxides, and is more likely to become a promising candidate for future flexible electronic devices.

Flexibility On-Demand: Multivariate 3D Covalent Organic Frameworks.

Dynamic 3D covalent organic frameworks (dynaCOFs) have shown concerted structural transformation and responses upon adaptive guest adsorption. The multivariate (MTV) strategy incorporating multiple functionalities within a backbone is attractive for tuning the framework flexibility and dynamic responses. However, a major synthetic challenge arises from the different chemical reactivities of linkers usually resulting in phase separation. Here, we report a general synthetic protocol for making 3D MTV-COFs by balancing the linker reactivity and solvent polarity. Specifically, 15 crystalline and phase pure MTV-COF-300 isostructures are constructed by linking a tetrahedral unit with eight ditopic struts carrying various functional groups. We find that the electron-donating groups make the linker reactivity too low to allow the reaction to proceed fully, while the electron-withdrawing groups afford increased reactivity and hardly yield crystalline materials. To overcome the crystallization dilemma, the combination of polar aprotic with nonpolar solvents was used to improve the solubility of oligomers and slow the reaction kinetics in MTV-COF synthesis. We demonstrate the abilities of these MTV-COFs to tune gas dynamic behaviors and the separation of benzene and cyclohexane. These findings reveal the integration of multivariate functionalities into dynaCOFs with on-demand flexibility to achieve dynamic synergism in particular applications, outperforming their pure, monofunctional counterparts.

Soft Hydrogen-Bonded Organic Frameworks Constructed Using a Flexible Organic Cage Hinge.

Soft porous crystals combine flexibility and porosity, allowing them to respond structurally to external physical and chemical environments. However, striking the right balance between flexibility and sufficient rigidity for porosity is challenging, particularly for molecular crystals formed by using weak intermolecular interactions. Here, we report a flexible oxygen-bridged prismatic organic cage molecule, Cage-6-COOH, which has three pillars that exhibit "hinge-like" rotational motion in the solid state. Cage-6-COOH can form a range of hydrogen-bonded organic frameworks (HOFs) where the "hinge" can accommodate a remarkable 67° dihedral angle range between neighboring units. This stems both from flexibility in the noncovalent hydrogen-bonding motifs in the HOFs and the molecular flexibility in the oxygen-linked cage hinge itself. The range of structures for Cage-6-COOH includes two topologically complex interpenetrated HOFs, CageHOF-2α and CageHOF-2ß. CageHOF-2α is nonporous, while CageHOF-2ß has permanent porosity and a surface area of 458 m2 g-1. The flexibility of Cage-6-COOH allows this molecule to rapidly transform from a low-crystallinity solid into the two crystalline interpenetrated HOFs, CageHOF-2α and CageHOF-2ß, under mild conditions simply by using acetonitrile or ethanol vapor, respectively. This self-healing behavior was selective, with the CageHOF-2ß structure exhibiting structural memory behavior.

Silver nanoparticle-induced enhancement of light extraction in two-dimensional light-emitting diodes.

Monolayer transition metal dichalcogenides (TMDCs) with direct bandgaps are considered promising candidates for building light-emitting diodes (LEDs). One crucial indicator of their performance is the brightness of electroluminescence (EL). In this study, we fabricate WS2-based LEDs that make full use of the assistance of effective transient-mode charge injection. By introducing self-assembled silver nanoparticles (NPs) on top of the LED, the extraction efficiency is significantly improved, with a 2.9-fold EL enhancement observed in the experiment. Full-wave simulations further confirm that the improvement comes from the scattering capability of silver NPs, with results qualitatively fitting the experiment. This approach, with its compatibility with van der Waals heterostructures, can be further promoted to enhance the brightness of 2D monolayer TMDC-based LEDs.

An H2 O-Initiated Crosslinking Strategy for Ultrafine-Nanoclusters-Reinforced High-Toughness Polymer-In-Plasticizer Solid Electrolyte.

Incorporating plasticizers is an effective way to facilitate conduction of ions in solid polymer electrolytes (SPEs). However, this conductivity enhancement often comes at the cost of reduced mechanical properties, which can make the electrolyte membrane more difficult to process and increase safety hazards. Here, a novel crosslinking strategy, wherein metal-alkoxy-terminated polymers can be crosslinked by precisely controlling the content of H2 O as an initiator, is proposed. As a proof-of-concept, trimethylaluminum (TMA)-functionalized poly(ethylene oxide) (PEO) is used to demonstrate that ultrafine Al-O nanoclusters can serve as nodes to crosslink PEO chains with a wide range of molecular weights from 10 000 to 8 000 000 g mol-1 . The crosslinked polymer network can incorporate a high concentration of plasticizers, with a total weight percentage over 75%, while still maintaining excellent stretchability (4640%) and toughness (3.87 × 104  kJ m-3 ). The resulting electrolyte demonstrates high ionic conductivity (1.41 mS cm-1 ), low interfacial resistance toward Li metal (48.1 Ω cm2 ), and a wide electrochemical window (>4.8 V vs Li+ /Li) at 30 °C. Furthermore, the LiFePO4 /Li battery shows stable cycle performance with a capacity retention of 98.6% (146.3 mAh g-1 ) over 1000 cycles at 1C (1C = 170 mAh g-1 ) at 30 °C.

Symmetry-breaking dynamics in a tautomeric 3D covalent organic framework.

The enolimine-ketoenamine tautomerism has been utilised to construct 2D covalent organic frameworks (COFs) with a higher level of chemical robustness and superior photoelectronic activity. However, it remains challenging to fully control the tautomeric states and correlate their tautomeric structure-photoelectronic properties due to the mobile equilibrium of proton transfer between two other atoms. We show that symmetry-asymmetry tautomerisation from diiminol to iminol/cis-ketoenamine can be stabilised and switched in a crystalline, porous, and dynamic 3D COF (dynaCOF-301) through concerted structural transformation and host-guest interactions upon removal and adaptive inclusion of various guest molecules. Specifically, the tautomeric dynaCOF-301 is constructed by linking the hydroquinone with a tetrahedral building block through imine linkages to form 7-fold interwoven diamondoid networks with 1D channels. Reversible framework deformation and ordering-disordering transition are determined from solvated to activated and hydrated phases, accompanied by solvatochromic and hydrochromic effects useful for rapid, steady, and visual naked-eye chemosensing.

Anaerobic fermentation of organic solid waste: Recent updates in substrates, products, and the process with multiple products co-production.

The effective conversion and recycling of organic solid waste contribute to the resolution of widespread issues such as global environmental pollution, energy scarcity and resource depletion. The anaerobic fermentation technology provides for the effective treatment of organic solid waste and the generation of various products. The analysis, which is based on bibliometrics, concentrates on the valorisation of affordable and easily accessible raw materials with high organic matter content as well as the production of clean energy substances and high value-added platform products. The processing and application status of fermentation raw materials such as waste activated sludge, food waste, microalgae and crude glycerol are investigated. To analyse the status of the preparation and engineering applications of the products, the fermentation products biohydrogen, VFAs, biogas, ethanol, succinic acid, lactic acid, and butanol are employed as representatives. Simultaneously, the anaerobic biorefinery process with multiple product co-production is sorted out. Product co-production can reduce waste discharge, enhance resource recovery efficiency, and serve as a model for improving anaerobic fermentation economics.

High-throughput calculation screening for new silicon allotropes with monoclinic symmetry.

A total of 87 new monoclinic silicon allotropes are systematically scanned by a random strategy combined with group and graph theory and high-throughput calculations. The new allotropes include 13 with a direct or quasi-direct band gap and 12 with metallic characteristics, and the rest are indirect band gap semiconductors. More than 30 of these novel monoclinic Si allotropes show bulk moduli greater than or equal to 80 GPa, and three of them show even greater bulk moduli than diamond Si. Only two of the new Si allotropes show a greater shear modulus than diamond Si. The crystal structures, stability (elastic constants, phonon spectra), mechanical properties, electronic properties, effective carrier masses and optical properties of all 87 Si monoclinic allotropes are studied in detail. The electron effective masses ml of five of the new allotropes are smaller than that of diamond Si. All of these novel monoclinic Si allotropes show strong absorption in the visible spectral region. Taken together with their electronic band gap structures, this makes them promising materials for photovoltaic applications. These investigations greatly enrich the current knowledge of the structure and electronic properties of silicon allotropes.

Multi-stage Transformations of a Cluster-Based Metal-Organic Framework: Perturbing Crystals to Glass-Forming Liquids that Re-Crystallize at High Temperature.

Glassy and liquid state metal-organic frameworks (MOFs) are emerging type of materials subjected to intense research for their rich physical and chemical properties. In this report, we obtained the first glassy MOF that involves metal-carboxylate cluster building units via multi-stage structural transformations. This MOF is composed of linear [Mn3 (COO)6 ] node and flexible pyridyl-ethenylbenzoic linker. The crystalline MOF was first perturbed by vapor hydration and thermal dehydration to give an amorphous state, which can go through a glass transition at 505 K into a super-cooled liquid. The super-cooled liquid state is stable through a wide temperature range of 40 K and has the largest fragility index of 105, giving a broad processing window. Remarkably, the super-cooled liquid can not only be quenched into glass, but also recrystallize into the initial MOF when heated to a higher temperature above 558 K. The mechanism of the multi-stage structural transformations was studied by systematic characterizations of in situ X-ray diffraction, calorimetry, rheological, spectroscopic and pair-distribution function analysis. These multi-stage transformations not only represent a rare example of high temperature coordinative recognition and self-assembly, but also provide new MOF processing strategy through crystal-amorphous-liquid-crystal transformations.

Monolithic Titanium Alkoxide Networks for Lithium-Ion Conductive All-Solid-State Electrolytes.

Reticular chemistry provides opportunities to design solid-state electrolytes (SSEs) with modular tunability. However, SSEs based on modularly designed crystalline metal-organic frameworks (MOFs) often require liquid electrolytes for interfacial contact. Monolithic glassy MOFs can have liquid processability and uniform lithium conduction, which is promising for the reticular design of SSE without liquid electrolytes. Here, we develop a generalizable strategy for the modular design of noncrystalline SSEs based on a bottom-up synthesis of glassy MOFs. We demonstrate such a strategy by linking polyethylene glycol (PEG) struts and nanosized titanium-oxo clusters into network structures termed titanium alkoxide networks (TANs). The modular design allows the incorporation of PEG linkers with different molecular weights, which give optimal chain flexibility for high ionic conductivity, and the reticular coordinative network provides a controlled degree of cross-linking that gives adequate mechanical strength. This research shows the power of reticular design in noncrystalline molecular framework materials for SSEs.

Insights into the loss of glucoraphanin in post-harvested broccoli--Possible involvement of the declined supply capacity of sulfur donor.

The loss of characteristic nutrient glucoraphanin during the shelf life seriously affects the nutritional quality of broccoli. Here, we monitored the changes in the levels of sulfur donors (cysteine and glutathione) required for glucoraphanin biosynthesis. Similar to glucoraphanin, cysteine content decreased sharply. Continuous down-regulation of BoCysK1 and BoCysK2 genes encoding cysteine synthase might account for cysteine loss. Contrarily, glutathione content accumulated steadily, which might owe to the up-regulation of biosynthetic gene (BoEC1). Additionally, the change of malondialdehyde content was positively correlated with glutathione, implying that oxidative stress might stimulate glutathione accumulation. Nevertheless, the expression of BoGSTF11 gene encoding glutathione S-transferases was down-regulated, which blocked the supply of glutathione. The increase in the content of raphanusamic acid (degradation product) indicated that insufficient supply of sulfur donors not only could constrain the biosynthesis of glucoraphanin but also triggered its degradation.

Effect of milk fat and its main fatty acids on oxidation and glycation level of milk.

Milk is a highly nutritional food rich in protein and fat that is prone to deterioration by oxidation and glycation reactions at storage and processing. In this study, glycation products and lipid oxidation products contents in skim milk, whole milk, and milk fat simulation groups were determined to evaluate the effect of milk fat components on glycation at 120 °C for 60 min. The increase rate of carbonyl compound, main advanced glycation end products (AGEs) levels, and glycation sites number of α-casein and ß-casein are higher in whole milk than that in skim milk, indicating that milk fat promoted protein glycation significantly. In milk fat simulation groups, oleic acid and linoleic acid (LA) were added to milk fat in skim milk proportionally, promoting the formation of glycation products; however, palmitic acid had no such effect. LA exhibited strong promotion on AGEs formation. Lipid oxidation radicals, protein carbonyl amine condensation, and carbonyl compound formation were critical factors for milk glycation, according to OPLS-DA results. Therefore, radicals of fat oxidation are speculated to trigger the early glycation, and carbonyl compounds of fat oxidation act as important intermediates of glycation, fat type, form, and its degradation rate, thus play essential roles in milk glycation. Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-022-05658-z.

Guest-adaptive molecular sensing in a dynamic 3D covalent organic framework.

Molecular recognition is an attractive approach to designing sensitive and selective sensors for volatile organic compounds (VOCs). Although organic macrocycles and cages have been well-developed for recognising organics by their adaptive pockets in liquids, porous solids for gas detection require a deliberate design balancing adaptability and robustness. Here we report a dynamic 3D covalent organic framework (dynaCOF) constructed from an environmentally sensitive fluorophore that can undergo concerted and adaptive structural transitions upon adsorption of gas and vapours. The COF is capable of rapid and reliable detection of various VOCs, even for non-polar hydrocarbon gas under humid conditions. The adaptive guest inclusion amplifies the host-guest interactions and facilitates the differentiation of organic vapours by their polarity and sizes/shapes, and the covalently linked 3D interwoven networks ensure the robustness and coherency of the materials. The present result paves the way for multiplex fluorescence sensing of various VOCs with molecular-specific responses.

Synergistic Stimulation of Metal-Organic Frameworks for Stable Super-cooled Liquid and Quenched Glass.

Metal-organic framework (MOF) glasses are a fascinating new class of materials, yet their prosperity has been impeded by the scarcity of known examples and limited vitrification methods. In the work described in this report, we applied synergistic stimuli of vapor hydration and thermal dehydration to introduce structural disorders in interpenetrated dia-net MOF, which facilitate the formation of stable super-cooled liquid and quenched glass. The material after stimulus has a glass transition temperature (Tg) of 560 K, far below the decomposition temperature of 695 K. When heated, the perturbed MOF enters a super-cooled liquid phase that is stable for a long period of time (>104 s), across a broad temperature range (26 K), and has a large fragility index of 83. Quenching the super-cooled liquid gives rise to porous MOF glass with maintained framework connectivity, confirmed by EXAFS and PDF analysis. This method provides a fundamentally new route to obtain glassy materials from MOFs that cannot be melted without causing decomposition.

Tower carbon: a new large-cell carbon allotrope.

The structural development of novel carbon materials has always been a hot spot in theoretical and experimental research, due to carbon possess a wide range of applications in the fields of industry and electronic technology. In this work, ansp2+sp3hybrid carbon allotrope, named tower carbon, is proposed and studied based on density functional theory, including its structure, stability, electronic and mechanical properties. The crystal structure of tower carbon is like a Chinese classical architectural tower, so it is named tower carbon, which belongs to the cubic crystal system, and it is stable in thermodynamics, dynamics, and mechanics. The electronic band structure of tower carbon is calculated by Heyd-Scuseria-Ernzerhof hybrid functional. The results show that tower carbon is metallic material. In addition, the anisotropy factor of tower carbon and the directional dependence of Young's modulus, shear modulus, and Poisson's ratio are estimated. Compared with cF320, the tower carbon has less anisotropy.

Performance enhancement of an N-polar nitride deep-ultraviolet light-emitting diode with compositionally graded p-AlGaN.

Highly efficient hole injection into a AlGaN quantum well is desirable in nitride deep-ultraviolet light-emitting diodes (DUV LEDs) for high optical performance. In this work, we report the observation of enhanced hole injection in the N-polar AlGaN-based DUV LEDs with compositionally graded p-AlxGa1-xN (x = 0.65-0.75) by simulation and show that the enhanced hole injection leads to the increase of the peak internal quantum efficiency (IQE) and the significant reduction of efficiency droop at high current density. This work might activate researchers to realize the efficient polarization p-type doping of N-polar AlGaN with high Al content and thus to achieve high performance DUV LEDs experimentally.

24-epibrassinolide alleviates postharvest yellowing of broccoli via improving its antioxidant capacity.

Postharvest crop yellowing is a major concern in the broccoli industry. The effect and underlying mechanisms of 24-epibrassinolide (EBR) treatment on yellowing in postharvest broccoli were investigated. Treatment with 2 µM EBR markedly inhibited the increase of the yellowing index and L* values, causing higher retention of the metric hue angle and chlorophyll content compared to the control. Treatment also alleviated oxidative damage by preventing the accumulation of malondialdehyde and superoxide anion (O2•-). The ascorbic acid content of broccoli reached its lowest value at the end of its shelf life, whereas that of the treated sample was obviously higher than the control. Moreover, treated broccoli exhibited higher superoxide dismutase, ascorbate peroxidase, and phenylalanine ammonia-lyase activities. Multivariate statistical analysis further demonstrated the effective enhancement of EBR treatment on antioxidant enzymes. These results indicate that exogenous application of EBR ameliorates postharvest yellowing by improving the antioxidant capacity of broccoli.