Triple Templates Directed Synthesis of Nitrogen-Doped Hierarchically Porous Carbons from Pyridine Rich Monomer as Efficient and Reversible SO2 Adsorbents.

Herein, a variety of 2,6-diaminopyridine (DAP) derived nitrogen-doped hierarchically porous carbon (DAP-NHPC-T) prepared from carbonization-induced structure transformation of DAP-Zn-SiO2-P123 nanocomposites are reported, which are facilely prepared from solvent-free co-assembly of block copolymer templates P123 with pyridine-rich monomer of DAP, Zn(NO3)2 and tetramethoxysilane. In the pyrolysis process, P123 and SiO2 templates promote the formation of mesoporous and supermicroporous structures in the DAP-NHPC-T, while high-temperature volatilization of Zn contributed to generation of micropores. The DAP-NHPC-T possess large BET surface areas (≈956-1126 m2 g-1), hierarchical porosity with micro-supermicro-mesoporous feature and high nitrogen contents (≈10.44-5.99 at%) with tunable density of pyridine-based nitrogen sites (≈5.99-3.32 at%), exhibiting good accessibility and reinforced interaction with SO2. Consequently, the DAP-NHPC-T show high SO2 capacity (14.7 mmol g-1, 25 °C and 1.0 bar) and SO2/CO2/N2 IAST selectivities, extraordinary dynamic breakthrough separation efficiency and cycling stability, far beyond any other reported nitrogen-doped metal-free carbon. As verified by in situ spectroscopy and theoretical calculations, the pyridine-based nitrogen sites of the DAP-NHPC-T boost SO2 adsorption via the unique charge transfer, the adsorption mechanism and reaction model have been finally clarified.

Facet-dependent diversity of Pt-O coordination for Pt 1 /CeO 2 catalysts achieved by oriented atomic deposition.

The surface chemistry of CeO2 is dictated by the well-defined facets, which exert great influence on the supported metal species and the catalytic performance. Here we report Pt1/CeO2 catalysts exhibiting specific structures of Pt-O coordination on different facets by using adequate preparation methods. The simple impregnation method results in Pt-O3 coordination on the predominantly exposed {111} facets, while the photo-deposition method achieves oriented atomic deposition for Pt-O4 coordination into the "nano-pocket" structure of {100} facets at the top. Compared to the impregnated Pt1/CeO2 catalyst showing normal redox properties and low-temperature activity for CO oxidation, the photo-deposited Pt1/CeO2 exhibits uncustomary strong metal-support interaction and extraordinary high-temperature stability. The preparation methods dictate the facet-dependent diversity of Pt-O coordination, resulting in the further activity-selectivity trade-off. By applying specific preparation routes, our work provides an example of disentangling the effects of support facets and coordination environments for nano-catalysts.

Unlocking Enhanced Butadiene Selectivity: The Crucial Role of Zeolite Channel Confinement in the Selective Decarbonylation of γ-Valerolactone.

Herein, we report a highly selective production route for butadiene from γ-valerolactone over zeolite catalysts. The catalytic performance of eight zeolites with different framework topologies were compared, revealing that zeolites with narrower 10-membered ring channels exhibit enhanced selectivity of butadiene. Specifically, ZSM-35 and ZSM-22, featuring the narrowest 10-membered ring channels, demonstrate the highest butadiene selectivity to 61 % and 59 %, respectively. Notably, surface passivation of ZSM-35 leads to a remarkable increase in butadiene selectivity to 82 %, maintaining a 99 % conversion. Additionally, we propose a reaction network and identify cyclopentenone as a key intermediate in the transformation of γ-valerolactone to butadiene. Both experimental and theoretical results conclude that confinement effect of 10-membered ring channels improves the selectivity of butadiene.

Spectroscopically Visualizing the Evolution of Hydrogen-Bonding Interactions.

Understanding chemical bond variations is the soul of chemistry as it is essential for any chemical process. The evolution of hydrogen bonds is one of the most fundamental and emblematic events during proton transfer; however, its experimental visualization remains a formidable challenge because of the transient timescales. Herein, by subtly regulating the proton-donating ability of distinct proton donors (zeolites or tungstophosphoric acid), a series of different hydrogen-bonding configurations were precisely manipulated. Then, an advanced two-dimensional (2D) heteronuclear correlation nuclear magnetic resonance (NMR) spectroscopic technique was utilized to simultaneously monitor the electronic properties of proton donors and acceptors (2-13C-acetone or trimethylphosphine oxide) through chemical shifts. Parabolic 1H-13C NMR relationships combined with single-well and double-well potential energy surfaces derived from theoretical simulations quantitatively identified the hydrogen bond types and allowed the evolution of hydrogen bonds to be visualized in diverse acid-base interaction complexes during proton transfer. Our findings provide a new perspective to reveal the nature and evolution of hydrogen bonds and confirm the superiority of 2D NMR techniques in identifying the subtle distinctions of various hydrogen-bonding configurations.

Modulating the Microenvironment of Silanols in Pure-Silicon Zeolites for Boosting Vapor-phase Beckmann Rearrangement of Cyclohexanone Oxime.

Vapor-phase Beckmann rearrangement of cyclohexanone oxime (CHO) to ε-caprolactam (CPL) is still difficult to commercialize at the industrial scale due to its relatively low catalytic activity and poor lifetime. Herein, we synthesized a series of pure-silicon zeolites (including MFI, MEL, and -SVR) with three-dimensional 10-member-ring topolgies, diverse silanol status, and hierarchical porosity to investigate the synergistic effects of inner diffusivity and reactivity. S-1 zeolite of MFI-type topology with plentiful silanol nests exhibits a more preferable catalytic performance in terms of CHO conversion (99.7%) and CPL selectivity (89.7%), much higher than those of MEL- and -SVR-type zeolites mainly due to their diverse silanol distribution. With the construction of hierarchical porosity, S-1-P shows improved CPL selectivity of 94.1% owing to the enhanced diffusivity to shorten the retention time of the reactant and product molecules. The reaction mechanism and network have been further revealed by density functional theory (DFT) calculations and experimental designs, which indicate that silanol nests are major active sites due to their suitable interaction with CHO rather than terminal silanols. Particularly, the microenvironments of silanols can be modulated by alcohol solvents, ascribed to their different charge transfer and steric hindrance. Consequently, S-1-P shows superior CPL selectivity of 97.3% in ethonal solvents, which have higher adsorb energy of -0.627 eV with silanol nests than other alcohols. The present study not only provides a fundamental guide for the design of zeolite catalysts but also provides a reference for modulating the microenvironment of active sites according to the catalytic mechanism.

Design of an Organic Template for Synthesizing ITR Zeolites under Ge-Free Conditions.

Germanosilicate zeolites with various structures have been extensively synthesized, but the syntheses of corresponding zeolite structures in the absence of germanium species remain a challenge. One such example is an ITR zeolite structure, which is a twin of the ITH zeolite structure. Through the modification of a classic organic template for synthesizing ITH zeolites and thus designing a new organic template with high compatibility to ITR zeolite assisted by theoretical simulation, we, for the first time, show the Ge-free synthesis of an ITR structure including pure silica, aluminosilicate, and borosilicate ITR zeolites. These materials have high crystallinity, corresponding to an ITR content of more than 95%. In the methanol-to-propylene (MTP) reaction, the obtained aluminosilicate ITR zeolite exhibits excellent propylene selectivity and a long lifetime compared with conventional aluminosilicate ZSM-5 zeolite. The strategy for the design of organic templates might offer a new opportunity for rational syntheses of novel zeolites and, thus, the development of highly efficient zeolite catalysts in the future.

Versatile Synthesis of Hollow-Structured Mesoporous Carbons by Enhanced Surface Interaction for High-Performance Lithium-Ion Batteries.

Nanoporous carbons are very attractive for various applications including energy storage. Templating methods with assembled amphiphilic molecules or porous inorganic templates are typically used for the synthesis. Amongst the different members of this family, CMK-5-like structures that are constructed to consist of sub-10 nm amorphous carbon nanotubes and ultrahigh specific surface area due to their thin pore walls, have the best properties in various respects. However, the fabrication of such hollow-structured mesoporous carbons entails elaborately tailoring the surface properties of the template pore walls and selecting specific carbon precursors. Thus, very limited cases are successful. Herein, a versatile and general silanol-assisted surface-casting method to create hollow-structured mesoporous carbons and heteroatom-doped derivatives with numerous organic molecules (e.g., furfuryl alcohol, resol, 2-thiophene methanol, dopamine, tyrosine) and different structural templates is reported. These carbon materials exhibit ultrahigh surface area (2400 m2  g-1 ), large pore volume (4.0 cm3  g-1 ), as well as satisfactory lithium-storage capacity (1460 mAh g-1 at 0.1 A g-1 ), excellent rate capability (320 mAh g-1 at 5 A g-1 ), and very outstanding cycling performance (2000 cycles at 5 A g-1 ).

Cold, Hot, Dry, and Wet: Locations and Dynamics of CO2 and H2O Co-Adsorbed in an Ultramicroporous MOF.

Climate change from anthropogenic carbon dioxide (CO2) emissions poses a severe threat to society. A variety of mitigation strategies currently include some form of CO2 capture. Metal-organic frameworks (MOFs) have shown great promise for carbon capture and storage, but several issues must be solved before feasible widespread adoption is possible. MOFs often exhibit reduced chemical stabilities and CO2 adsorption capacities in the presence of water, which is ubiquitous in nature and many practical settings. A comprehensive understanding of water influence on CO2 adsorption in MOFs is necessary. We have used multinuclear nuclear magnetic resonance (NMR) experiments at temperatures ranging from 173 to 373 K, along with complementary computational techniques, to investigate the co-adsorption of CO2 and water across various loading levels in the ultra-microporous ZnAtzOx MOF. This approach yields detailed information regarding the number of CO2 and water adsorption sites along with their locations, guest dynamics, and host-guest interactions. Guest adsorption and motional models proposed from NMR data are supported by computational results, including visualizations of adsorption locations and the spatial distribution of guests in different loading scenarios. The wide variety and depth of information presented demonstrates how this experimental methodology can be used to investigate humid carbon capture and storage applications in other MOFs.

Rhodium nanoparticles supported on silanol-rich zeolites beyond the homogeneous Wilkinson's catalyst for hydroformylation of olefins.

Hydroformylation is one of the largest industrially homogeneous processes that strongly relies on catalysts with phosphine ligands such as the Wilkinson's catalyst (triphenylphosphine coordinated Rh). Heterogeneous catalysts for olefin hydroformylation are highly desired but suffer from poor activity compared with homogeneous catalysts. Herein, we demonstrate that rhodium nanoparticles supported on siliceous MFI zeolite with abundant silanol nests are very active for hydroformylation, giving a turnover frequency as high as ~50,000 h-1 that even outperforms the classical Wilkinson's catalyst. Mechanism study reveals that the siliceous zeolite with silanol nests could efficiently enrich olefin molecules to adjacent rhodium nanoparticles, enhancing the hydroformylation reaction.

Loading-Driven Diffusion Pathway Selectivity in Zeolites with Continuum Intersecting Channels.

The diffusion processes in zeolites are important for heterogeneous catalysis. Herein, we show that unique zeolites with "continuum intersecting channels" (e.g., BEC, POS, and SOV), in which two intersections are proximal, are greatly significant to the diffusion process with spontaneous switching of the diffusion pathway under varied loading. At low loading, the synergy of strong adsorption sites and molecular reorientation in intersections contribute to almost exclusive molecular diffusion in smaller channels. With an increase in molecular loading, the adsorbates are transported preferentially in larger channels mainly due to the lower diffusion barrier inside continuum intersection channels. This work demonstrates the ability to adjust the prior diffusion pathway by controlling the molecular loading, which may be beneficial for the separation of the product and byproduct in heterogeneous catalysis.

A Six-Membered Ring Molecular Sieve Achieved by a Reconstruction Route.

Zeolite molecular sieves with at least eight-membered rings are widely applied in industrial applications, while zeolite crystals with six-membered rings are normally regarded as useless products due to the occupancy of the organic templates and/or inorganic cation in the micropores that could not be removed. Herein, we showed that a novel six-membered ring molecular sieve (ZJM-9) with fully open micropores could be achieved by a reconstruction route. The mixed gas breakthrough experiments such as CH3OH/H2O, CH4/H2O, CO2/H2O, and CO/H2O at 25 °C showed that this molecular sieve was efficient for selective dehydration. Particularly, a lower desorption temperature (95 °C) of ZJM-9 than that (250 °C) of the commercial 3A molecular sieve might offer an opportunity for saving more energy in dehydration processes.

Hyperloop-like diffusion of long-chain molecules under confinement.

The ultrafast transport of adsorbates in confined spaces is a goal pursued by scientists. However, diffusion will be generally slower in nano-channels, as confined spaces inhibit motion. Here we show that the movement of long-chain molecules increase with a decrease in pore size, indicating that confined spaces promote transport. Inspired by a hyperloop running on a railway, we established a superfast pathway for molecules in zeolites with nano-channels. Rapid diffusion is achieved when the long-chain molecules keep moving linearly, as well as when they run along the center of the channel, while this phenomenon do not exist for short-chain molecules. This hyperloop-like diffusion is unique for long-chain molecules in a confined space and is further verified by diffusion experiments. These results offer special insights into molecule diffusion under confinement, providing a reference for the selection of efficient catalysts with rapid transport in the industrial field.

Enhance Hydrogen Isotopes Separation by Alkali Earth Metal Dopant in Metal-Organic Framework.

Kinetic quantum sieving (KQS) based on pore size and chemical affinity quantum sieving (CAQS) based on adsorption site are two routes of porous materials to separate hydrogen isotope mixtures. Alkali earth metals (Be, Mg, and Ca) were doped into UiO-67 to explore whether these metal sites can promote H2/D2 separation. Based on the zero-point energy and adsorption enthalpy calculated by density functional theory calculations, the Be dopant shows better H2/D2 separation performance than other alkali earth metal dopants and unsaturated metal sites in metal-organic frameworks based on CAQS. Orbital interaction strongly relates to the chemical affinity and further influences the D2/H2 selectivity. Moreover, the predicted D2/H2 selectivity of Be-doped sites (49.4) at 77 K is even larger than the best experimental result (26). Finally, the different dynamic behaviors of H2 and D2 on Be-doped UiO-67 indicate its strong H2/D2 separation performance via KQS.

Charge-separation driven mechanism via acylium ion intermediate migration during catalytic carbonylation in mordenite zeolite.

By employing ab initio molecular dynamic simulations, solid-state NMR spectroscopy, and two-dimensional correlation analysis of rapid scan Fourier transform infrared spectroscopy data, a new pathway is proposed for the formation of methyl acetate (MA) via the acylium ion (i.e.,CH3 - C ≡ O+) in 12-membered ring (MR) channel of mordenite by an integrated reaction/diffusion kinetics model, and this route is kinetically and thermodynamically more favorable than the traditional viewpoint in 8MR channel. From perspective of the complete catalytic cycle, the separation of these two reaction zones, i.e., the C-C bond coupling in 8MR channel and MA formation in 12MR channel, effectively avoids aggregation of highly active acetyl species or ketene, thereby reducing undesired carbon deposit production. The synergistic effect of different channels appears to account for the high carbonylation activity in mordenite that has thus far not been fully explained, and this paradigm may rationalize the observed catalytic activity of other reactions.

Multiscale dynamical cross-talk in zeolite-catalyzed methanol and dimethyl ether conversions.

Establishing a comprehensive understanding of the dynamical multiscale diffusion and reaction process is crucial for zeolite shape-selective catalysis and is urgently demanded in academia and industry. So far, diffusion and reaction for methanol and dimethyl ether (DME) conversions have usually been studied separately and focused on a single scale. Herein, we decipher the dynamical molecular diffusion and reaction process for methanol and DME conversions within the zeolite material evolving with time, at multiple scales, from the scale of molecules to single catalyst crystal and catalyst ensemble. Microscopic intracrystalline diffusivity is successfully decoupled from the macroscopic experiments and verified by molecular dynamics simulation. Spatiotemporal analyses of the confined carbonaceous species allow us to track the migratory reaction fronts in a single catalyst crystal and the catalyst ensemble. The constrained diffusion of DME relative to methanol alleviates the high local chemical potential of the reactant by attenuating its local enrichment, enhancing the utilization efficiency of the inner active sites of the catalyst crystal. In this context, the dynamical cross-talk behaviors of material, diffusion and reaction occurring at multiple scales is uncovered. Zeolite catalysis not only reflects the reaction characteristics of heterogeneous catalysis, but also provides enhanced, moderate or suppressed local reaction kinetics through the special catalytic micro-environment, which leads to the heterogeneity of diffusion and reaction at multiple scales, thereby realizing efficient and shape-selective catalysis.

Structural and Acidic Characteristics of Multiple Zr Defect Sites in UiO-66 Metal-Organic Frameworks.

Although defects are prevalent in metal-organic frameworks (MOFs) and usually play a crucial role in modulating their performance in various applications, detailed structural characterizations of various defects remain a challenging task mainly due to their disordered, heterogeneous, and local nature. In this work, by using solid-state nuclear magnetic resonance spectroscopy (SSNMR) techniques in conjunction with density functional theory (DFT) calculations, it is clearly elucidated that the trimethylphosphine (TMP)-assisted 31P NMR strategy is capable of greatly facilitating the qualitative and quantitative description of the detailed structural and acidic characteristics as well as the evolution process of various Zr defects with subtle distinctions in UiO-66 upon moderate thermal treatment, hence surpassing most conventional analytical techniques. These results offer a fundamental understanding of the defect chemistry in MOFs.

Molecular identification and quantification of defect sites in metal-organic frameworks with NMR probe molecules.

The defects in metal-organic frameworks (MOFs) can dramatically alter their pore structure and chemical properties. However, it has been a great challenge to characterize the molecular structure of defects, especially when the defects are distributed irregularly in the lattice. In this work, we applied a characterization strategy based on solid-state nuclear magnetic resonance (NMR) to assess the chemistry of defects. This strategy takes advantage of the coordination-sensitive phosphorus probe molecules, e.g., trimethylphosphine (TMP) and trimethylphosphine oxide (TMPO), that can distinguish the subtle differences in the acidity of defects. A variety of local chemical environments have been identified in defective and ideal MOF lattices. The geometric dimension of defects can also be evaluated by using the homologs of probe molecules with different sizes. In addition, our method provides a reliable way to quantify the density of defect sites, which comes together with the molecular details of local pore environments. The comprehensive solid-state NMR strategy can be of great value for a better understanding of MOF structures and for guiding the design of MOFs with desired catalytic or adsorption properties.

Coking-Resistant Polyethylene Upcycling Modulated by Zeolite Micropore Diffusion.

Although the mass production of synthetic plastics has transformed human lives, it has resulted in waste accumulation on the earth. Here, we report a low-temperature conversion of polyethylene into olefins. By mixing the polyethylene feed with rationally designed ZSM-5 zeolite nanosheets at 280 °C in flowing hydrogen as a carrier gas, light hydrocarbons (C1-C7) were produced with a yield of up to 74.6%, where 83.9% of these products were C3-C6 olefins with almost undetectable coke formation. The reaction proceeds in multiple steps, including polyethylene melting, flowing to access the zeolite surface, cracking on the zeolite surface, formation of intermediates to diffuse into the zeolite micropores, and cracking into small molecules in the zeolite micropores. The ZSM-5 zeolite nanosheets kinetically matched the cascade cracking steps on the zeolite external surface and within micropores by boosting the intermediate diffusion. This feature efficiently suppressed the intermediate accumulation on the zeolite surface to minimize coke formation. In addition, we found that hydrogen participation in the cracking process could hinder the formation of polycyclic species within zeolite micropores, which also contributes to the rapid molecule diffusion. The coking-resistant polyethylene upcycling process at a low temperature not only overturns the general viewpoint for facile coke formation in the catalytic cracking over the zeolites but also demonstrates how the polyethylene-based plastics can be upcycled to valuable chemicals. In addition to the model polyethylene, the reaction system worked efficiently for the depolymerization of multiple practically used polyethylene-rich plastics, enabling an industrially and economically viable path for dealing with plastic wastes.

Fischer-Tropsch synthesis to olefins boosted by MFI zeolite nanosheets.

Catalytic reactions are severely restricted by the strong adsorption of product molecules on the catalyst surface, where promoting desorption of the product and hindering its re-adsorption benefit the formation of free sites on the catalyst surface for continuous substrate conversion1,2. A solution to this issue is constructing a robust nanochannel for the rapid escape of products. We demonstrate here that MFI zeolite crystals with a short b-axis of 90-110 nm and a finely controllable microporous environment can effectively boost the Fischer-Tropsch synthesis to olefins by shipping the olefin molecules. The ferric carbide catalyst (Na-FeCx) physically mixed with a zeolite promoter exhibited a CO conversion of 82.5% with an olefin selectivity of 72.0% at the low temperature of 260 °C. By contrast, Na-FeCx alone without the zeolite promoter is poorly active under equivalent conditions, and shows the significantly improved olefin productivity achieved through the zeolite promoter. These results show that the well-designed zeolite, as a promising promoter, significantly boosts Fischer-Tropsch synthesis to olefins by accelerating escape of the product from the catalyst surface.