Multienvironment genomic prediction in tetraploid potato.

Multienvironment genomic prediction was applied to tetraploid potato using 147 potato varieties, tested for 2 years, in 3 locations representative of 3 distinct regions in Europe. Different prediction scenarios were investigated to help breeders predict genotypic performance in the regions from one year to the next, for genotypes that were tested this year (scenario 1), as well as new genotypes (scenario 3). In scenario 2, we predicted new genotypes for any one of the 6 trials, using all the information that is available. The choice of prediction model required assessment of the variance-covariance matrix in a mixed model that takes into account heterogeneity of genetic variances and correlations. This was done for each analyzed trait (tuber weight, tuber length, and dry matter) where examples of both limited and higher degrees of heterogeneity was observed. This explains why dry matter did not need complex multienvironment modeling to combine environments and increase prediction ability, while prediction in tuber weight, improved only when models were flexible enough to capture the heterogeneous variances and covariances between environments. We also found that the prediction abilities in a target trial condition decreased, if trials with a low genetic correlation to the target were included when training the model. Genomic prediction in tetraploid potato can work once there is clarity about the prediction scenario, a suitable training set is created, and a multienvironment prediction model is chosen based on the patterns of G×E indicated by the genetic variances and covariances.

Whole genome resequencing and phenotyping of MAGIC population for high resolution mapping of drought tolerance in chickpea.

Terminal drought is one of the major constraints to crop production in chickpea (Cicer arietinum L.). In order to map drought tolerance related traits at high resolution, we sequenced multi-parent advanced generation intercross (MAGIC) population using whole genome resequencing approach and phenotyped it under drought stress environments for two consecutive years (2013-14 and 2014-15). A total of 52.02 billion clean reads containing 4.67 TB clean data were generated on the 1136 MAGIC lines and eight parental lines. Alignment of clean data on to the reference genome enabled identification of a total, 932,172 of SNPs, 35,973 insertions, and 35,726 deletions among the parental lines. A high-density genetic map was constructed using 57,180 SNPs spanning a map distance of 1606.69 cM. Using compressed mixed linear model, genome-wide association study (GWAS) enabled us to identify 737 markers significantly associated with days to 50% flowering, days to maturity, plant height, 100 seed weight, biomass, and harvest index. In addition to the GWAS approach, an identity-by-descent (IBD)-based mixed model approach was used to map quantitative trait loci (QTLs). The IBD-based mixed model approach detected major QTLs that were comparable to those from the GWAS analysis as well as some exclusive QTLs with smaller effects. The candidate genes like FRIGIDA and CaTIFY4b can be used for enhancing drought tolerance in chickpea. The genomic resources, genetic map, marker-trait associations, and QTLs identified in the study are valuable resources for the chickpea community for developing climate resilient chickpeas.

statgenMPP: an R package implementing an IBD-based mixed model approach for QTL mapping in a wide range of multi-parent populations.

MOTIVATION: Multi-parent populations (MPPs) are popular for QTL mapping because they combine wide genetic diversity in parents with easy control of population structure, but a limited number of software tools for QTL mapping are specifically developed for general MPP designs. RESULTS: We developed an R package called statgenMPP, adopting a unified identity-by-descent (IBD)-based mixed model approach for QTL analysis in MPPs. The package offers easy-to-use functionalities of IBD calculations, mixed model solutions and visualizations for QTL mapping in a wide range of MPP designs, including diallele, nested-association mapping populations, multi-parent advanced genetic inter-cross populations and other complicated MPPs with known crossing schemes. AVAILABILITY AND IMPLEMENTATION: The R package statgenMPP is open-source and freely available on CRAN at https://CRAN.R-project.org/package=statgenMPP. SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.

Little heterosis found in diploid hybrid potato: The genetic underpinnings of a new hybrid crop.

Hybrid potato breeding has become a novel alternative to conventional potato breeding allowing breeders to overcome intractable barriers (e.g. tetrasomic inheritance, masked deleterious alleles, obligate clonal propagation) with the benefit of seed-based propagule, flexible population design, and the potential of hybrid vigor. Until now, however, no formal inquiry has adequately examined the relevant genetic components for complex traits in hybrid potato populations. In this present study, we use a 2-step multivariate modeling approach to estimate the variance components to assess the magnitude of the general and specific combining abilities in diploid hybrid potato. Specific combining ability effects were identified for all yield components studied here warranting evidence of nonadditive genetic effects in hybrid potato yield. However, the estimated general combining ability effects were on average 2 times larger than their respective specific combining ability quantile across all yield phenotypes. Tuber number general combining abilities and specific combining abilities were found to be highly correlated with total yield's genetic components. Tuber volume was shown to have the largest proportion of additive and nonadditive genetic variation suggesting under-selection of this phenotype in this population. The prominence of additive effects found for all traits presents evidence that the mid-parent value alone is useful for hybrid potato evaluation. Heterotic vigor stands to be useful in bolstering simpler traits but this will be dependent on target phenotypes and market requirements. This study represents the first diallel analysis of its kind in diploid potato using material derived from a commercial hybrid breeding program.

Haplotype reconstruction in connected tetraploid F1 populations.

In diploid species, many multiparental populations have been developed to increase genetic diversity and quantitative trait loci (QTL) mapping resolution. In these populations, haplotype reconstruction has been used as a standard practice to increase the power of QTL detection in comparison with the marker-based association analysis. However, such software tools for polyploid species are few and limited to a single biparental F1 population. In this study, a statistical framework for haplotype reconstruction has been developed and implemented in the software PolyOrigin for connected tetraploid F1 populations with shared parents, regardless of the number of parents or mating design. Given a genetic or physical map of markers, PolyOrigin first phases parental genotypes, then refines the input marker map, and finally reconstructs offspring haplotypes. PolyOrigin can utilize single nucleotide polymorphism (SNP) data coming from arrays or from sequence-based genotyping; in the latter case, bi-allelic read counts can be used (and are preferred) as input data to minimize the influence of genotype calling errors at low depth. With extensive simulation we show that PolyOrigin is robust to the errors in the input genotypic data and marker map. It works well for various population designs with ≥30 offspring per parent and for sequences with read depth as low as 10x. PolyOrigin was further evaluated using an autotetraploid potato dataset with a 3 × 3 half-diallel mating design. In conclusion, PolyOrigin opens up exciting new possibilities for haplotype analysis in tetraploid breeding populations.

QTL mapping in outbred tetraploid (and diploid) diallel populations.

Over the last decade, multiparental populations have become a mainstay of genetics research in diploid species. Our goal was to extend this paradigm to autotetraploids by developing software for quantitative trait locus (QTL) mapping in connected F1 populations derived from a set of shared parents. For QTL discovery, phenotypes are regressed on the dosage of parental haplotypes to estimate additive effects. Statistical properties of the model were explored by simulating half-diallel diploid and tetraploid populations with different population sizes and numbers of parents. Across scenarios, the number of progeny per parental haplotype (pph) largely determined the statistical power for QTL detection and accuracy of the estimated haplotype effects. Multiallelic QTL with heritability 0.2 were detected with 90% probability at 25 pph and genome-wide significance level 0.05, and the additive haplotype effects were estimated with over 90% accuracy. Following QTL discovery, the software enables a comparison of models with multiple QTL and nonadditive effects. To illustrate, we analyzed potato tuber shape in a half-diallel population with three tetraploid parents. A well-known QTL on chromosome 10 was detected, for which the inclusion of digenic dominance lowered the Deviance Information Criterion (DIC) by 17 points compared to the additive model. The final model also contained a minor QTL on chromosome 1, but higher-order dominance and epistatic effects were excluded based on the DIC. In terms of practical impacts, the software is already being used to select offspring based on the effect and dosage of particular haplotypes in breeding programs.

Understanding the Effectiveness of Genomic Prediction in Tetraploid Potato.

Use of genomic prediction (GP) in tetraploid is becoming more common. Therefore, we think it is the right time for a comparison of GP models for tetraploid potato. GP models were compared that contrasted shrinkage with variable selection, parametric vs. non-parametric models and different ways of accounting for non-additive genetic effects. As a complement to GP, association studies were carried out in an attempt to understand the differences in prediction accuracy. We compared our GP models on a data set consisting of 147 cultivars, representing worldwide diversity, with over 39 k GBS markers and measurements on four tuber traits collected in six trials at three locations during 2 years. GP accuracies ranged from 0.32 for tuber count to 0.77 for dry matter content. For all traits, differences between GP models that utilised shrinkage penalties and those that performed variable selection were negligible. This was surprising for dry matter, as only a few additive markers explained over 50% of phenotypic variation. Accuracy for tuber count increased from 0.35 to 0.41, when dominance was included in the model. This result is supported by Genome Wide Association Study (GWAS) that found additive and dominance effects accounted for 37% of phenotypic variation, while significant additive effects alone accounted for 14%. For tuber weight, the Reproducing Kernel Hilbert Space (RKHS) model gave a larger improvement in prediction accuracy than explicitly modelling epistatic effects. This is an indication that capturing the between locus epistatic effects of tuber weight can be done more effectively using the semi-parametric RKHS model. Our results show good opportunities for GP in 4x potato.

An IBD-based mixed model approach for QTL mapping in multiparental populations.

KEY MESSAGE: The identity-by-descent (IBD)-based mixed model approach introduced in this study can detect quantitative trait loci (QTLs) referring to the parental origin and simultaneously account for multilevel relatedness of individuals within and across families. This unified approach is proved to be a powerful approach for all kinds of multiparental population (MPP) designs. Multiparental populations (MPPs) have become popular for quantitative trait loci (QTL) detection. Tools for QTL mapping in MPPs are mostly developed for specific MPPs and do not generalize well to other MPPs. We present an IBD-based mixed model approach for QTL mapping in all kinds of MPP designs, e.g., diallel, Nested Association Mapping (NAM), and Multiparental Advanced Generation Intercross (MAGIC) designs. The first step is to compute identity-by-descent (IBD) probabilities using a general Hidden Markov model framework, called reconstructing ancestry blocks bit by bit (RABBIT). Next, functions of IBD information are used as design matrices, or genetic predictors, in a mixed model approach to estimate variance components for multiallelic genetic effects associated with parents. Family-specific residual genetic effects are added, and a polygenic effect is structured by kinship relations between individuals. Case studies of simulated diallel, NAM, and MAGIC designs proved that the advanced IBD-based multi-QTL mixed model approach incorporating both kinship relations and family-specific residual variances (IBD.MQMkin_F) is robust across a variety of MPP designs and allele segregation patterns in comparison to a widely used benchmark association mapping method, and in most cases, outperformed or behaved at least as well as other tools developed for specific MPP designs in terms of mapping power and resolution. Successful analyses of real data cases confirmed the wide applicability of our IBD-based mixed model methodology.

Construction of Genetic Linkage Maps in Multiparental Populations.

Construction of genetic linkage maps has become a routine step for mapping quantitative trait loci (QTL), particularly in animal and plant breeding populations. Many multiparental populations have recently been produced to increase genetic diversity and QTL mapping resolution. However, few software packages are available for map construction in these populations. In this paper, we build a general framework for the construction of genetic linkage maps from genotypic data in diploid populations, including bi- and multiparental populations, cross-pollinated (CP) populations, and breeding pedigrees. The framework is implemented as an automatic pipeline called magicMap, where the maximum multilocus likelihood approach utilizes genotypic information efficiently. We evaluate magicMap by extensive simulations and eight real datasets: one biparental, one CP, four multiparent advanced generation intercross (MAGIC), and two nested association mapping (NAM) populations, the number of markers ranging from a few hundred to tens of thousands. Not only is magicMap the only software capable of accommodating all of these designs, it is more accurate and robust to missing genotypes and genotyping errors than commonly used packages.

Recursive Algorithms for Modeling Genomic Ancestral Origins in a Fixed Pedigree.

The study of gene flow in pedigrees is of strong interest for the development of quantitative trait loci (QTL) mapping methods in multiparental populations. We developed a Markovian framework for modeling ancestral origins along two homologous chromosomes within individuals in fixed pedigrees. A highly beneficial property of our method is that the size of state space depends linearly or quadratically on the number of pedigree founders, whereas this increases exponentially with pedigree size in alternative methods. To calculate the parameter values of the Markov process, we describe two novel recursive algorithms that differ with respect to the pedigree founders being assumed to be exchangeable or not. Our algorithms apply equally to autosomes and sex chromosomes, another desirable feature of our approach. We tested the accuracy of the algorithms by a million simulations on a pedigree. We demonstrated two applications of the recursive algorithms in multiparental populations: design a breeding scheme for maximizing the overall density of recombination breakpoints and thus the QTL mapping resolution, and incorporate pedigree information into hidden Markov models in ancestral inference from genotypic data; the conditional probabilities and the recombination breakpoint data resulting from ancestral inference can facilitate follow-up QTL mapping. The results show that the generality of the recursive algorithms can greatly increase the application range of genetic analysis such as ancestral inference in multiparental populations.

Accurate Genotype Imputation in Multiparental Populations from Low-Coverage Sequence.

Many different types of multiparental populations have recently been produced to increase genetic diversity and resolution in QTL mapping. Low-coverage, genotyping-by-sequencing (GBS) technology has become a cost-effective tool in these populations, despite large amounts of missing data in offspring and founders. In this work, we present a general statistical framework for genotype imputation in such experimental crosses from low-coverage GBS data. Generalizing a previously developed hidden Markov model for calculating ancestral origins of offspring DNA, we present an imputation algorithm that does not require parental data and that is applicable to bi- and multiparental populations. Our imputation algorithm allows heterozygosity of parents and offspring as well as error correction in observed genotypes. Further, our approach can combine imputation and genotype calling from sequencing reads, and it also applies to called genotypes from SNP array data. We evaluate our imputation algorithm by simulated and real data sets in four different types of populations: the F2, the advanced intercross recombinant inbred lines, the multiparent advanced generation intercross, and the cross-pollinated population. Because our approach uses marker data and population design information efficiently, the comparisons with previous approaches show that our imputation is accurate at even very low ([Formula: see text]) sequencing depth, in addition to having accurate genotype phasing and error detection.

Partial preferential chromosome pairing is genotype dependent in tetraploid rose.

It has long been recognised that polyploid species do not always neatly fall into the categories of auto- or allopolyploid, leading to the term 'segmental allopolyploid' to describe everything in between. The meiotic behaviour of such intermediate species is not fully understood, nor is there consensus as to how to model their inheritance patterns. In this study we used a tetraploid cut rose (Rosa hybrida) population, genotyped using the 68K WagRhSNP array, to construct an ultra-high-density linkage map of all homologous chromosomes using methods previously developed for autotetraploids. Using the predicted bivalent configurations in this population we quantified differences in pairing behaviour among and along homologous chromosomes, leading us to correct our estimates of recombination frequency to account for this behaviour. This resulted in the re-mapping of 25 695 SNP markers across all homologues of the seven rose chromosomes, tailored to the pairing behaviour of each chromosome in each parent. We confirmed the inferred differences in pairing behaviour among chromosomes by examining repulsion-phase linkage estimates, which also carry information about preferential pairing and recombination. Currently, the closest sequenced relative to rose is Fragaria vesca. Aligning the integrated ultra-dense rose map with the strawberry genome sequence provided a detailed picture of the synteny, confirming overall co-linearity but also revealing new genomic rearrangements. Our results suggest that pairing affinities may vary along chromosome arms, which broadens our current understanding of segmental allopolyploidy.

Probabilistic Multilocus Haplotype Reconstruction in Outcrossing Tetraploids.

For both plant (e.g., potato) and animal (e.g., salmon) species, unveiling the genetic architecture of complex traits is key to the genetic improvement of polyploids in agriculture. F1 progenies of a biparental cross are often used for quantitative trait loci (QTL) mapping in outcrossing polyploids, where haplotype reconstruction by identifying the parental origins of marker alleles is necessary. In this paper, we build a novel and integrated statistical framework for multilocus haplotype reconstruction in a full-sib tetraploid family from biallelic marker dosage data collected from single-nucleotide polymorphism (SNP) arrays or next-generation sequencing technology given a genetic linkage map. Compared to diploids, in tetraploids, additional complexity needs to be addressed, including double reduction and possible preferential pairing of chromosomes. We divide haplotype reconstruction into two stages: parental linkage phasing for reconstructing the most probable parental haplotypes and ancestral inference for probabilistically reconstructing the offspring haplotypes conditional on the reconstructed parental haplotypes. The simulation studies and the application to real data from potato show that the parental linkage phasing is robust to, and that the subsequent ancestral inference is accurate for, complex chromosome pairing behaviors during meiosis, various marker segregation types, erroneous genetic maps except for long-range disturbances of marker ordering, various amounts of offspring dosage errors (up to ∼20%), and various fractions of missing data in parents and offspring dosages.

Reconstruction of Genome Ancestry Blocks in Multiparental Populations.

We present a general hidden Markov model framework called R: econstructing A: ncestry B: locks BIT: by bit (RABBIT) for reconstructing genome ancestry blocks from single-nucleotide polymorphism (SNP) array data, a required step for quantitative trait locus (QTL) mapping. The framework can be applied to a wide range of mapping populations such as the Arabidopsis multiparent advanced generation intercross (MAGIC), the mouse Collaborative Cross (CC), and the diversity outcross (DO) for both autosomes and X chromosomes if they exist. The model underlying RABBIT accounts for the joint pattern of recombination breakpoints between two homologous chromosomes and missing data and allelic typing errors in the genotype data of both sampled individuals and founders. Studies on simulated data of the MAGIC and the CC and real data of the MAGIC, the DO, and the CC demonstrate that RABBIT is more robust and accurate in reconstructing recombination bin maps than some commonly used methods.

Modeling X-linked ancestral origins in multiparental populations.

The models for the mosaic structure of an individual's genome from multiparental populations have been developed primarily for autosomes, whereas X chromosomes receive very little attention. In this paper, we extend our previous approach to model ancestral origin processes along two X chromosomes in a mapping population, which is necessary for developing hidden Markov models in the reconstruction of ancestry blocks for X-linked quantitative trait locus mapping. The model accounts for the joint recombination pattern, the asymmetry between maternally and paternally derived X chromosomes, and the finiteness of population size. The model can be applied to various mapping populations such as the advanced intercross lines (AIL), the Collaborative Cross (CC), the heterogeneous stock (HS), the Diversity Outcross (DO), and the Drosophila synthetic population resource (DSPR). We further derive the map expansion, density (per Morgan) of recombination breakpoints, in advanced intercross populations with L inbred founders under the limit of an infinitely large population size. The analytic results show that for X chromosomes the genetic map expands linearly at a rate (per generation) of two-thirds times 1 - 10/(9L) for the AIL, and at a rate of two-thirds times 1 - 1/L for the DO and the HS, whereas for autosomes the map expands at a rate of 1 - 1/L for the AIL, the DO, and the HS.

Beyond metacommunity paradigms: habitat configuration, life history, and movement shape an herbivore community on oak.

Many empirical studies of metacommunities have focused on the classification of observational patterns into four contrasting paradigms characterized by different levels of movement and habitat heterogeneity. However, deeper insight into the underlying local and regional processes may be derived from a combination of long-term observational data and experimental studies. With the aim of exploring forces structuring the insect metacommunity on oak, we fit a hierarchical Bayesian state-space model to data from observations and experiments. The fitted model reveals large variation in species-specific dispersal abilities and basic reproduction numbers, R0. The residuals from the model show only weak correlations among species, suggesting a lack of strong interspecific interactions. Simulations with model-derived parameter estimates indicate that habitat configuration and species attributes both contribute substantially to structuring insect communities. Overall, our findings demonstrate that community-level variation in movement and life history are key drivers of metacommunity dynamics.

A general modeling framework for genome ancestral origins in multiparental populations.

The next generation of QTL (quantitative trait loci) mapping populations have been designed with multiple founders, where one to a number of generations of intercrossing are introduced prior to the inbreeding phase to increase accumulated recombinations and thus mapping resolution. Examples of such populations are Collaborative Cross (CC) in mice and Multiparent Advanced Generation Inter-Cross (MAGIC) lines in Arabidopsis. The genomes of the produced inbred lines are fine-grained random mosaics of the founder genomes. In this article, we present a novel framework for modeling ancestral origin processes along two homologous autosomal chromosomes from mapping populations, which is a major component in the reconstruction of the ancestral origins of each line for QTL mapping. We construct a general continuous time Markov model for ancestral origin processes, where the rate matrix is deduced from the expected densities of various types of junctions (recombination breakpoints). The model can be applied to monoecious populations with or without self-fertilizations and to dioecious populations with two separate sexes. The analytic expressions for map expansions and expected junction densities are obtained for mapping populations that have stage-wise constant mating schemes, such as CC and MAGIC. Our studies on the breeding design of MAGIC populations show that the intercross mating schemes do not matter much for large population size and that the overall expected junction density, and thus map resolution, are approximately proportional to the inverse of the number of founders.

Bayesian inference of local trees along chromosomes by the sequential Markov coalescent.

We propose a genealogy-sampling algorithm, Sequential Markov Ancestral Recombination Tree (SMARTree), that provides an approach to estimation from SNP haplotype data of the patterns of coancestry across a genome segment among a set of homologous chromosomes. To enable analysis across longer segments of genome, the sequence of coalescent trees is modeled via the modified sequential Markov coalescent (Marjoram and Wall, Genetics 7:16, 2006). To assess performance in estimating these local trees, our SMARTree implementation is tested on simulated data. Our base data set is of the SNPs in 10 DNA sequences over 50 kb. We examine the effects of longer sequences and of more sequences, and of a recombination and/or mutational hotspot. The model underlying SMARTree is an approximation to the full recombinant-coalescent distribution. However, in a small trial on simulated data, recovery of local trees was similar to that of LAMARC (Kuhner et al. Genetics 156:1393-1401, 2000a), a sampler which uses the full model.

Joint inference of identity by descent along multiple chromosomes from population samples.

There has been much interest in detecting genomic identity by descent (IBD) segments from modern dense genetic marker data and in using them to identify human disease susceptibility loci. Here we present a novel Bayesian framework using Markov chain Monte Carlo (MCMC) realizations to jointly infer IBD states among multiple individuals not known to be related, together with the allelic typing error rate and the IBD process parameters. The data are phased single nucleotide polymorphism (SNP) haplotypes. We model changes in latent IBD state along homologous chromosomes by a continuous time Markov model having the Ewens sampling formula as its stationary distribution. We show by simulation that this model for the IBD process fits quite well with the coalescent predictions. Using simulation data sets of 40 haplotypes over regions of 1 and 10 million base pairs (Mbp), we show that the jointly estimated IBD states are very close to the true values, although the presence of linkage disequilibrium decreases the accuracy. We also present comparisons with the ibd_haplo program, which estimates IBD among sets of four haplotypes. Our new IBD detection method focuses on the scale between genome-wide methods using simple IBD models and complex coalescent-based methods that are limited to short genome segments. At the scale of a few Mbp, our approach offers potentially more power for fine-scale IBD association mapping.

A new method to uncover signatures of divergent and stabilizing selection in quantitative traits.

While it is well understood that the pace of evolution depends on the interplay between natural selection, random genetic drift, mutation, and gene flow, it is not always easy to disentangle the relative roles of these factors with data from natural populations. One popular approach to infer whether the observed degree of population differentiation has been influenced by local adaptation is the comparison of neutral marker gene differentiation (as reflected in FST) and quantitative trait divergence (as reflected in QST). However, this method may lead to compromised statistical power, because FST and QST are summary statistics which neglect information on specific pairs of populations, and because current multivariate tests of neutrality involve an averaging procedure over the traits. Further, most FST-QST comparisons actually replace QST by its expectation over the evolutionary process and are thus theoretically flawed. To overcome these caveats, we derived the statistical distribution of population means generated by random genetic drift and used the probability density of this distribution to test whether the observed pattern could be generated by drift alone. We show that our method can differentiate between genetic drift and selection as a cause of population differentiation even in cases with FST=QST and demonstrate with simulated data that it disentangles drift from selection more accurately than conventional FST-QST tests especially when data sets are small.