Multi-Layer Polyurethane-Fiber-Prepared Entangled Strain Sensor with Tunable Sensitivity and Working Range for Human Motion Detection.

The entanglement of fibers can form physical and topological structures, with the resulting bending and stretching strains causing localized changes in pressure. In this study, a multi-layer polyurethane-fiber-prepared (MPF) sensor was developed by coating the CNT/PU sensing layer on the outside of an elastic electrode through a wet-film method. The entangled topology of two MPFs was utilized to convert the stretching strain into localized pressure at the contact area, enabling the perception of stretching strain. The influence of coating mechanical properties and surface structure on strain sensing performance was investigated. A force regulator was introduced to regulate the mechanical properties of the entangled topology of MPF. By modifying the thickness and length proportion of the force regulator, the sensitivity factor and sensitivity range of the sensor could be controlled, achieving a high sensitivity factor of up to 127.74 and a sensitivity range of up to 58%. Eight sensors were integrated into a sensor array and integrated into a dance costume, successfully monitoring the multi-axis motion of the dancer's lumbar spine. This provides a new approach for wearable biomechanical sensors.

Circ_0006251 mediates the proliferation and apoptosis of vascular smooth muscle cells in CAD via enhancing TET3 and PPM1B expression.

Coronary artery disease (CAD) is a serious global problem that has been considered to be a major cause of death. Circular RNAs (circRNAs) as a key player in the regulation of cardiac progression and disease. Nevertheless, most circRNAs are poorly understood. In our research, we discussed the circ_TET3 (circ_0006251) function in the development of CAD. Firstly, circ_0006251 expression was measured through RT-qPCR analysis. Functional results prove the clear functionality of circ_0006251 for CAD. In addition, mechanism experiments including RIP, RNA pull-down and luciferase reporter results were applied to delve into the mechanisms of regulation of circ_0006251 in CAD. Results showed that Circ_0006251 expression was notably increased in PDGF-BB-induced VSMCs cells. Moreover, circ_0006251 interference mitigated the VSMCs cells proliferation and stimulated apoptosis after being treated with PDGF-BB. Furthermore, circ_0006251 targeted TET3 and PPM1B via sponging miR-361-3p, thereby contributing to CAD occurrence. In conclusion, Circ_0006251 could be identified as a biomarker for CAD which might shed light on the diagnosis and therapy of CAD.

Highly Conductive, Ultrastrong, and Flexible Wet-Spun PEDOT:PSS/Ionic Liquid Fibers for Wearable Electronics.

Conductive poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) fibers with high electrical conductivity, flexibility, and robustness are urgently needed for constructing wearable fiber-based electronics. In this study, the highly conductive (4288 S/cm), ultrastrong (a high tensile strength of 956 MPa), and flexible (a low Young's modulus of 3.8 GPa) PEDOT:PSS/1-ethyl-3-methylimidazolium dicyanamide (EMIM:DCA) (P/ED) fiber was prepared by wet-spinning and a subsequent H2SO4-immersion-drawing process. As far as we know, this is the best performance of the PEDOT:PSS fiber reported so far. The structure and conformation of the P/ED fiber were characterized by FESEM, XPS, Raman spectroscopy, UV-vis-NIR spectroscopy, and WAXS. The results show that the high performances of the P/ED fiber are mainly attributed to the massive removal of PSS and high degree of crystallinity (87.9%) and orientation (0.71) of PEDOT caused by the synergistic effect of the ionic liquid, concentrated sulfuric acid, and high stretching. Besides, the P/ED fiber shows a small bending radius of 0.1 mm, and the conductivity of the P/ED fiber is nearly unchanged after 1000 repeated cycles of bending and humidity changes within 50-90%. Based on this, various P/ED fiber-based devices including the circuit connection wire, thermoelectric power generator, and temperature sensor were constructed, demonstrating its wide applications for constructing flexible and wearable electronics.

Locating the Reaction Site of 1,2,3,4-Butanetetracarboxylic Acid Carboxyl and Cellulose Hydroxyl in the Esterification Cross-Linking.

The modification of cellulose with polycarboxylic acid is an important technology to functionalize the substrate. 1,2,3,4-Butanetetracarboxylic acid (BTCA) can significantly improve the anti-wrinkle performance of treated cotton fabrics by cross-linking with cellulose. However, the reaction site of BTCA carboxyl and the cellulose hydroxyl has not yet been clarified, which hinders the in-depth understanding about the reaction mechanism and the development of new cross-linking reagents. This study combines Fourier transform infrared and two-dimensional correlation spectroscopy to try to make it clear. Results confirmed that BTCA anhydride is an active intermediate (corresponding to the generally accepted theory) to esterify with cellulose hydroxyl, especially the O(6)-H(6) and O(2)-H(2). Cellobiose was taken as a model of cellulose to react with BTCA at variable temperatures, proving the above conclusion. In addition, the C14- or C11-containing carboxyl of BTCA showed a higher reactivity. Based on calculating reaction kinetics and thermodynamics with Gaussian 09W software, the most likely reaction route between BTCA and cellulose was as follows: BTCA → BTCA C5C14 anhydride → C14O15 ester → C14O15 ester C31C34 anhydride → C14O15C33O ester.

Synergistically Improving Flexibility and Thermoelectric Performance of Composite Yarn by Continuous Ultrathin PEDOT:PSS/DMSO/Ionic Liquid Coating.

Combining fabrics with a poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) coating is the most promising method to fabricate wearable thermoelectric (TE) devices. However, the high modulus, low strain, and low TE performance of PEDOT:PSS coating lead to poor flexibility and low power generation efficiency. In this study, dimethyl sulfoxide (DMSO) and ionic liquids (ILs) were selected as a modifier to enhance the flexibility and TE performance of PEDOT:PSS. Different from the penetrating structure and coil conformation of pristine PEDOT:PSS coating, a flexible continuous ultrathin layer of PEDOT:PSS/DMSO/1-ethyl-3-methylimidazolium dicyanamide (P/D/ED) with a linear conformation forms on the surface of cotton yarn. The morphology and structure of PEDOT:PSS and P/D/ED coating were characterized by FESEM, XPS, and Raman spectroscopy. Compared with the pristine PEDOT:PSS film, the P/D/ED film shows significantly reduced modules and enhanced strain and bending stability. Moreover, the TE performance of P/D/ED-coated yarn is significantly enhanced with nearly half mass loading. Based on this, a large-area wearable TE fabric with enhanced flexibility and TE performance was prepared. The output power density is 136.1 mW/m2 at ΔT = 40.8 K, which is a typically high value compared with the former reported composite TE fabrics. This study provides a new way to synergistically enhance the flexibility and TE performance of composite yarn, and the prepared TE fabric has great potential as a wearable power source.

Full-Textile Human Motion Detection Systems Integrated by Facile Weaving with Hierarchical Core-Shell Piezoresistive Yarns.

The tremendous progress of the wearable intelligent system has brought an urgent demand for flexible pressure sensors, especially for those possessing high sensing performances, simple manufacture technology, and efficient integration. In this work, hierarchical core-shell piezoresistive yarns (HCPYs), which contain internal silver-plated nylon electrodes and surface microporous structured carbon nanotubes (CNTs)/thermoplastic polyurethane (TPU) sensing layer, are designed and manufactured via facile wet-spinning accompanied by a water vapor coagulating bath. The obtained HCPY can either be inserted into traditional textiles to assemble a single-pressure sensor, or be woven into a textile-based flexible pressure sensors array with expected size and resolution, without compromising their comfort, breathability, and three-dimensional (3D) conformability. Simultaneously, to further enhance the sensing performance, the surface microporous structures of HCPYs are optimized by altering the treatment humidity and exposure time during the process of water vapor-induced phase separation. The wearable pressure sensors assembled by the optimal HCPY achieved a high sensitivity up to 84.5 N-1, a good durability over 5000-cycle tests, a fast response time of 2.1 ms, and a recovery time of 2.4 ms. Moreover, the wearable pressure sensors have been successfully used to monitor physical signals and human motions. The textile-based flexible pressure sensors array has also been seamlessly integrated with sportswear to detect movements of the elbow joint and map spatial pressure distribution, which makes HCPY a promising candidate for constructing next-generation wearable electronics.

Breathable and Large Curved Area Perceptible Flexible Piezoresistive Sensors Fabricated with Conductive Nanofiber Assemblies.

The rapid development of wearable electronics, humanoid robots, and artificial intelligence requires sensors to sensitively and stably detect external stress variations in large areas or on three-dimensional (3D) irregularly shaped surfaces while possessing the comfort. Most importantly, the flexibility and 3D compliance of sensors, and the fitting state of the interface between the sensor and the object are of great significance to the sensing accuracy and reliability. The ordered or random stacking and entangling of flexible and electrically conductive fiber materials can form a highly porous and mechanically stable fiber assembly. The changes in external stress can lead to the air trapped in the fiber assembly to flow in and out rapidly and repeatedly, as well as the reversible mechanical deformation of fiber materials. Correspondingly, the contact areas between electrically conductive fibers in the fiber assembly are reversibly changed, which makes the conductive and flexible fiber assembly be an ideal candidate for piezoresistive sensing material. It can be further expected that the statistical stability of contact points between conductive fibers under the stress may significantly increase with the decrease in fiber diameters. Herein, a new method to make a flexible piezoresistive sensor with conductive and porous fiber assembly was proposed. An ultrasensitive piezoresistive material was facilely prepared by fabricating conductive poly(vinyl alcohol-co-ethylene) (EVOH) nanofiber assemblies. The sensing performance of the piezoresistive sensor was optimized by regulating the nanofiber morphology, electrical conductivity, and mechanical properties. The flexible piezoresistive sensor exhibited a sensitivity of 2.79 kPa-1, a response time of 3 ms, and a recovery time of 10 ms. The sensing performance at different working frequencies was stable and durable within 4500 cycling tests. The flexible sensor showed good pressure-sensing accuracy and reliability when used on irregular surfaces and therefore was further applied in the static monitoring of large-area spatial pressure distribution and the wearable intelligent interactive device, demonstrating great application potential.

Fiber organic electrochemical transistors based on multi-walled carbon nanotube and polypyrrole composites for noninvasive lactate sensing.

Multi-walled carbon nanotubes (MWCNT) play a synergistic role with conducting polymer in practical applications such as biological sensing. In this paper, multi-walled carbon nanotube and polypyrrole (PPy) composites were prepared on a fiber surface for the first time, and their morphology and electrical properties were characterized. Compared with PPy-coated fiber, the presence of carbon nanotubes induced the growth of large areas of PPy nanowires. In addition, fiber organic electrochemical transistors (FECTs) based on PPy and MWCNT were assembled, showing a higher on/off ratio, better stability, and greater flexibility. The lactate biosensor based on FECTs exhibits high sensitivity, with a correlation coefficient of R = 0.9889, quick response time of 0.6-0.8 s, a wide linear response range of 1 nM-1 mM, and excellent selectivity for lactate. Furthermore, the lactate concentration in human sweat was successfully detected by a FECT-based sensor. The hybrid fibers can be easily woven and placed on fabric simply by stitching. This favorable performance of the FECT-based sensor makes it suitable for noninvasive sensing of lactate. Therefore, it provides a promising platform for future use in healthcare and detection applications. Graphical abstract.

Large-Area, Wearable, Self-Powered Pressure-Temperature Sensor Based on 3D Thermoelectric Spacer Fabric.

The rapid development of wearable devices puts forward higher requirements for mass-produced integrated smart systems that incorporate multiple electric components, such as energy supplying, multisensing, and communicating. To synchronously realize continuously self-powering, multifunctional sensing, distinguish signals from different stimuli, and productively design and fabricate a large-area sensing array, an all-fabric-based self-powered pressure-temperature-sensing electronic skin (e-skin) was prepared in this study by assembling highly flexible and compressible 3D spacer fabric (SF) and the thermoelectric poly(3,4-ethylenedioxythiophene)poly(styrenesulfonate) (PEDOT:PSS). The all-fabric-based e-skin can efficiently and accurately sense the temperature with a detection resolution of 0.1 K and a response time of 1 s, as well as pressure within a wide range of 200 Pa to 200 kPa and a fast response time of 80 ms. The electricity necessary for driving the sensor can be provided by the temperature difference between the body and environment. Notably, independent voltage and current signals can be generated and read out under the simultaneous temperature-pressure stimuli. For the first time, a real waistcoat-like e-skin with electricity-generating and pressure-temperature-sensing functions on the whole area was designed and prepared by a simple and easy to scale-up production method. All of these features make the developed all-fabric self-powered sensor have very promising applications.

Highly Accurate Wearable Piezoresistive Sensors without Tension Disturbance Based on Weaved Conductive Yarn.

Wearable piezoresistive sensors have attracted wide attention for application in human activities monitoring, smart robots, medical detection, etc. However, most of the sensing signals collected from the piezoresistive sensor are triggered by coupling forces, such as the combination of tension and pressure. Thus, the piezoresistive sensor would be incapable of accurately monitoring and evaluating specific human motion due to the mutual interference from tension and pressure, as the tension is difficult to be decoupled or eliminated from the coupling forces. Herein a prestretchable conductive yarn (PCY) sensor with pressure sensitivity but tension insensitivity was introduced to remove the disturbance from tension. The PCY-based piezoresistive sensor is tension insensitive (gauge factor of 0.11) but pressure sensitive (sensitivity of 187.33 MPa-1). The fabric-based pressure sensor assembled with cross-arranged PCY weft and warp revealed magnified pressure sensitivity compared with the single PCY yarn sensor, as well as tension insensitivity to strain and tensile angle. Moreover, it possessed benign cyclicity during 5000 cycles of pressing/releasing. Therefore, the fabric piezoresistive sensor based on weaved conductive yarns is suitable for highly accurate and large area pressure detection, such as monitoring massage intensity of acupuncture points.

Ultra-Sensitive Piezo-Resistive Sensors Constructed with Reduced Graphene Oxide/Polyolefin Elastomer (RGO/POE) Nanofiber Aerogels.

Flexible wearable pressure sensors have received extensive attention in recent years because of the promising application potentials in health management, humanoid robots, and human machine interfaces. Among the many sensory performances, the high sensitivity is an essential requirement for the practical use of flexible sensors. Therefore, numerous research studies are devoted to improving the sensitivity of the flexible pressure sensors. The fiber assemblies are recognized as an ideal substrate for a highly sensitive piezoresistive sensor because its three-dimensional porous structure can be easily compressed and can provide high interconnection possibilities of the conductive component. Moreover, it is expected to achieve high sensitivity by raising the porosity of the fiber assemblies. In this paper, the three-dimensional reduced graphene oxide/polyolefin elastomer (RGO/POE) nanofiber composite aerogels were prepared by chemical reducing the graphene oxide (GO)/POE nanofiber composite aerogels, which were obtained by freeze drying the mixture of the GO aqueous solution and the POE nanofiber suspension. It was found that the volumetric shrinkage of thermoplastic POE nanofibers during the reduction process enhanced the compression mechanical strength of the composite aerogel, while decreasing its sensitivity. Therefore, the composite aerogels with varying POE nanofiber usage were prepared to balance the sensitivity and working pressure range. The results indicated that the composite aerogel with POE nanofiber/RGO proportion of 3:3 was the optimal sample, which exhibits high sensitivity (ca. 223 kPa-1) and working pressure ranging from 0 to 17.7 kPa. In addition, the composite aerogel showed strong stability when it is either compressed with different frequencies or reversibly compressed and released 5000 times.

Facile Fabrication of Conductive Graphene/Polyurethane Foam Composite and Its Application on Flexible Piezo-Resistive Sensors.

Flexible pressure sensors have attracted tremendous research interests due to their wide applications in wearable electronics and smart robots. The easy-to-obtain fabrication and stable signal output are meaningful for the practical application of flexible pressure sensors. The graphene/polyurethane foam composites are prepared to develop a convenient method for piezo-resistive devices with simple structure and outstanding sensing performance. Graphene oxide was prepared through the modified Hummers method. Polyurethane foam was kept to soak in the obtained graphene oxide aqueous solution and then dried. After that, reduced graphene oxide/polyurethane composite foam has been fabricated under air phase reduction by hydrazine hydrate vapor. The chemical components and micro morphologies of the prepared samples have been observed by using FT-IR and scanning electron microscopy (SEM). The results predicted that the graphene is tightly adhered to the bare surface of the pores. The pressure sensing performance has been also evaluated by measuring the sensitivity, durability, and response time. The results indicate that the value of sensitivity under the range of 0-6 kPa and 6-25 kPa are 0.17 kPa-1 and 0.005 kPa-1, respectively. Cycling stability test has been performed 30 times under three varying pressures. The signal output just exhibits slight fluctuations, which represents the good cycling stability of the pressure sensor. At the same stage, the response time of loading and unloading of 20 g weight turned out to be about 300 ms. These consequences showed the superiority of graphene/polyurethane composite foam while applied in piezo-resistive devices including wide sensitive pressure range, high sensitivity, outstanding durability, and fast response.

Strategy of Constructing Light-Weight and Highly Compressible Graphene-Based Aerogels with an Ordered Unique Configuration for Wearable Piezoresistive Sensors.

Three-dimensional (3D) graphene aerogels (GAs) have attracted huge attention from researchers due to their great potential in vast applications. The hydrothermal reaction combined with freeze-drying using graphene oxide (GO) as a precursor has proven to be an effective method for obtaining relatively well-structured pure GAs. However, insufficient mechanical strength and low compressibility of the materials still limit their practical applications. Here, we report the microstructure-induced strong mechanical anisotropy of these monolithic GAs in transverse direction (TD) and longitudinal direction (LD), which has never been considered to be related to structural vulnerability. To overcome this anisotropy and enhance the structure, we hereby introduce our self-made poly(vinyl alcohol)- co-polyethylene (PVA- co-PE) nanofibers and low-molecular weight PVA as structural enhancers into the original 3D network to form a novel nanofiber-graphene composite aerogel. Intriguingly, a unique configuration is formed in the GA, in which the highly aligned stacked reduced GO sheets serve as the framework (cellular walls) and the nanofibers act as cross-linking columns anchored between the walls to support the structure along the TD, whereas the micro/nanosized PVA lamellae serve as binders. The resulting aerogel (referred to as graphene-PVA- co-PE nanofibers-PVA aerogel (GNPA)) has excellent compressive resilience along the TD and exhibits an ultrahigh gauge factor (14387%) at a very subtle strain (0.23%) in piezoresistive properties. The GNPA-TD has also been assembled into a variety of wearable sensors and demonstrates great potential for wireless human pressure sensing. In short, this study offers an extremely simple and effective method for developing graphene aerogels with a strong mechanical structure and paves the way for the application of 3D graphene in wearable sensors.

Wearable Fiber-Based Organic Electrochemical Transistors as a Platform for Highly Sensitive Dopamine Monitoring.

Fiber-based organic electrochemical transistors (FECTs) provide a new platform for the realization of an ultrafast and ultrasensitive biosensor, especially for the wearable dopamine (DA)-monitoring device. Here, we presented a fully filament-integrated fabric, it exhibited remarkable mechanical compatibility with the human body, and the minimum sensing unit was an organic electrochemical transistor (OECT) based on PVA- co-PE nanofibers (NFs) and polypyrrole (PPy) nanofiber network. The introduction of NFs notably increased the specific surface area and hydrophilicity of the PA6 filament, resulting in the formation of a large area of intertwined PPy nanofiber network. The electrical performance of PPy nanofiber network-modified fibers improved considerably. For the common FECTs, the typical on/off ratio was up to two orders of magnitude, and the temporal recovery time between on and off states was shortened to 0.34 s. Meanwhile, the device exhibited continuous cycling stability. In addition, the performances of FECT-based dopamine sensors depending on different gate electrodes have also been investigated. The PPy/NFs/PA6 filament-based dopamine sensor was more superior to the gold and platinum (Pt) wires, and the sensor presented long-term sensitivity with a detection region from 1 nM to 1 µM, rapid response time to a set of DA concentrations, remarkable selectivity in the presence of sodium chloride, uric acid, ascorbic acid and glucose, and superior reproducibility. Moreover, it could also be woven into the fabric product. The novel and wearable FECT device shows the potential to become the state-of-the-art DA-monitoring platform.

Ultrasensitive Wearable Pressure Sensors Assembled by Surface-Patterned Polyolefin Elastomer Nanofiber Membrane Interpenetrated with Silver Nanowires.

Wearable pressure sensors with ultrahigh sensitivity and flexibility have garnered tremendous attention because of their abilities to mimic the human somatosensory system and perceive surrounding pressure distribution. Herein, an ultrasensitive pressure sensor was fabricated with surface-patterned nanofibrous membranes (SPNMs) via a facile replica method from available plain-weaved nylon textiles. The SPNMs were composed of internal three-dimensional interpenetrating polyolefin elastomer nanofibers and silver nanowires (Ag NWs). The effects of the geometry of surface patterns and the density of the Ag NW network on the sensing performance of the assembled pressure sensor were systematically investigated. The results indicated that clavate groove-shaped surface patterns improved the sensitivity and a larger groove spacing contributed to higher sensitivities, whereas denser Ag NWs would reduce the sensing performance. The optimal pressure sensor assembled with SPNMs-45 and a Ag NW fraction of 3.8% showed high sensitivity (19.4 kPa-1) below the pressure of 2.76 kPa, a low detection limit (<1.6 Pa), fast response (30 and 42 ms), as well as excellent durability. These outstanding performances demonstrated its promising potential for wearable electronic applications, like detecting the spatial pressure distribution and monitoring human muscle motions.

Multistimulus Responsive Actuator with GO and Carbon Nanotube/PDMS Bilayer Structure for Flexible and Smart Devices.

Smart devices with abilities of perceiving, processing, and responding are attracting more and more attentions due to the emerging development of artificial intelligent systems, especially in biomimetic and intelligent robotics fields. Designing a smart actuator with high flexibility and multistimulation responsive behaviors to simulate the movement of creatures, such as weight lifting, heavy objects carrying via simple materials, and structural design is highly demanded for the development of intelligent systems. Herein, a soft actuator that can produce reversible deformations under the control of light, thermal, and humidity is fabricated by combining high photothermal properties of CNT/PDMS layer with the natural hydrophilic GO layer. Due to the asymmetric double-layer structure, the novel bilayer membrane-based actuator showed different bending directions under photothermal and humidity stimulations, resulting in bidirectional controllable bending behaviors. In addition, the actuation behaviors can be well controlled by directionally aligning the graphene oxide onto carbon nanotube/PDMS layer. The actuator can be fabricated into a series of complex biomimetic devices, such as, simulated biomimetic fingers, smart "tweezers", humidity control switches, which has great potential applications in flexible robots, artificial muscles, and optical control medical devices.

Highly transparent and rollable PVA-co-PE nanofibers synergistically reinforced with epoxy film for flexible electronic devices.

The development of electronics towards a more functions-integrated, flexible and stretchable direction requires mechanically flexible substrates with high thermal and dimensional stability and optical transparency. Herein, rolls of an optically transparent PVA-co-PE nanofibrous membrane/epoxy composite with synergistically enhanced thermal stability, very low CTE, and outstanding mechanical properties are reported. The nanoscale size, the unique inter-stack structure, and the strong interfacial interactions between the PVA-co-PE nanofibers and the epoxy contribute to the synergistic effects. Because of the match between the refractive index (RI) of the PVA-co-PE nanofibers and the epoxy matrix, the visible light transmittance of nanocomposite film could be as high as 85% and the composite film was still optically transparent with a nanofiber loading content of up to 61.7 wt%. The break strength and compliance matrix of the composite film with a high fiber loading of 61.7 wt% increased by 2.3 times of that of the neat epoxy film and exceeded 3000 m2 N-1, respectively. PVA-co-PE nanofibers have a very low CTE value (3.634 × 10-6 K-1) and could be applicable as a reinforcement to reduce the thermal expansion of epoxy. Furthermore, we developed a flexible alternating current electroluminescent (ACEL) device based on the transparent composite film and the experimental results showed that the transparent composite film could serve as substrate for flexible electronic devices. In addition, their electrical and optical properties were evaluated.

Continuously Producible Ultrasensitive Wearable Strain Sensor Assembled with Three-Dimensional Interpenetrating Ag Nanowires/Polyolefin Elastomer Nanofibrous Composite Yarn.

Fiber-shaped strain sensors with great flexibility and knittability have been tremendously concerned due to the wide applications in health manager devices, especially in human motion detection and physiological signal monitoring. Herein, a novel fiber-shaped strain sensor has been designed and prepared by interpenetrating Ag nanowires (NWs) into polyolefin elastomer nanofibrous yarn. The easy-to-obtain structure and simple roll-to-roll process make the continuous large-scale production of nanofibrous composite yarn possible. The continuous and alternating stretching and releasing reversibly change the contact probability between AgNWs in this interpenetrating network, leading to the variations of electrical resistance of the sensor. The gauge factors of strain sensors are calculated to be as high as 13920 and the minimum detection limit is only 0.065%. In addition, the strain sensor shows excellent durability during 4500 cycles with the strain of 10%. The response times of stretching and releasing strains are 10 and 15 ms, respectively. Furthermore, the strain sensor has been successfully applied in human motion detections both in single yarn and knitted fabrics. The result shows the practicability in applications of monitoring limbs movements, eye motion changes, artificial vocal cords, human pulse, and complex motions, which shows great potential in wearable sensors and electronic skin.

Ion sensors based on novel fiber organic electrochemical transistors for lead ion detection.

Fiber organic electrochemical transistors (FECTs) based on polypyrrole and nanofibers have been prepared for the first time. FECTs exhibited excellent electrical performances, on/off ratios up to 10(4) and low applied voltages below 2 V. The ion sensitivity behavior of the fiber organic electrochemical transistors was investigated. It exhibited that the transfer curve of FECTs shifted to lower gate voltage with increasing cations concentration, the sensitivity reached to 446 µA/dec in the 10(-5)-10(-2) M Pb(2+) concentration range. The ion selective properties of the FECTs have also been systematically studied for the detection of potassium, calcium, aluminum, and lead ions. The devices with different cations showed great difference in response curves. It was suitable for selectively monitoring Pb(2+) with respect to other cations. The results indicated FECTs were very effective for electrochemical sensing of lead ion, which opened a promising perspective for wearable electronics in healthcare and biological application. Graphical Abstract The schematic diagram of fiber organic electrochemical transistors based on polypyrrole and nanofibers for ion sensing.

Stretchable conductive polypyrrole/polyurethane (PPy/PU) strain sensor with netlike microcracks for human breath detection.

The development of wearable electronics that can monitor human physiological information demands specially structured materials with excellent stretchability and electrical conductivity. In this study, a new stretchable conductive polypyrrole/polyurethane (PPy/PU) elastomer was designed and prepared by surface diffusion and in situ polymerization of PPy inside and on porous PU substrates. The structures allowed the formation of netlike microcracks under stretching. The netlike microcrack structures make possible the reversible changes in the electrical resistance of PPy/PU elastomers under stretching and releasing cycles. The variations in morphology and chemical structures, stretchability, and conductivity as well as the sensitivity of resistance change under stretching cycles were investigated. The mechanism of reversible conductivity of the PPy/PU elastomer was proposed. This property was then used to construct a waistband-like human breath detector. The results demonstrated its potential as a strain sensor for human health care applications by showing reversible resistance changes in the repeated stretching and contracting motion when human breathes in and out.