N-terminal domain truncation yielded a unique dimer of polysaccharide hydrolase with enhanced enzymatic activity, stability and calcium ion independence.

Domain engineering, including domain truncation, fusion, or swapping, has become a common strategy to improve properties of enzymes, especially glycosyl hydrolases. However, there are few reports explaining the mechanism of increased activity from a protein structure perspective. Amy703 is an alkaline amylase with a unique N-terminal domain. Prior studies have shown that N-Amy, a mutant without an N-terminal domain, exhibits improved activity, stability, and calcium ion independence. In this study, we have used X-ray crystallography to determine the crystal structure of N-Amy and used AlphaFold2 to model the Amy703 structure, respectively. We further used size exclusion chromatography to show that Amy703 existed as a monomer, whereas N-Amy formed a unique dimer. It was found that the N-terminus of one monomer of N-Amy was inserted into the catalytic domain of its symmetrical subunit, resulting in the expansion of the catalytic pocket. This also significantly increased the pKa of the hydrogen donor Glu350, thereby enhancing substrate binding affinity and contributing to increased N-Amy activity. Meanwhile, two calcium ions were found to bind to N-Amy at different binding sites, which also contributed to the stability of protein. Therefore, this study provided new structural insights into the mechanisms of various glycosyl hydrolases.

Enhancing the activity of zearalenone lactone hydrolase toward the more toxic α-zearalanol via a single-point mutation.

Zearalenone (ZEN) and its derivatives are estrogenic mycotoxins known to pose significant health threats to humans and animals. Especially, the derivative α-zearalanol (α-ZAL) is over 10 times more toxic than ZEN. Simultaneous degradation of ZEN and its derivatives, especially α-ZAL, using ZEN lactone hydrolases (ZHDs) is a promising solution to eliminate their potential hazards to food safety. However, most available ZHDs exhibit limited activity toward the more toxic α-ZAL compared to ZEN. Here, we identified a broad-substrate spectrum ZHD, named ZHDAY3, from Exophiala aquamarina CBS 119918, which could not only efficiently degrade ZEN but also exhibited 73% relative activity toward α-ZAL. Through rational design, we obtained the ZHDAY3(N153H) mutant, which exhibited the highest specific activity (253.3 ± 4.3 U/mg) reported so far for degrading α-ZAL. Molecular docking, structural comparative analysis, and kinetic analysis collectively suggested that the shorter distance between the side chain of the catalytic residue His242 and the lactone bond of α-ZAL and the increased binding affinity to the substrate were mainly responsible for the improved catalytic activity of ZHDAY3(N153H) mutant. This mechanism was further validated through additional molecular docking of 18 mutants and experimental verification of six mutants.IMPORTANCEThe mycotoxins zearalenone (ZEN) and its derivatives pose a significant threat to food safety. Here, we present a highly promising ZEN lactone hydrolase (ZHD), ZHDAY3, which is capable of efficiently degrading both ZEN and the more toxic derivative α-ZAL. Next, the ZHDAY3(N153H) mutant obtained by single-point mutation exhibited the highest specific activity for degrading α-ZAL reported thus far. We further elucidated the molecular mechanisms underlying the enhanced hydrolytic activity of ZHDAY3(N153H) toward α-ZAL. These findings represent the first investigation on the molecular mechanism of ZHDs against α-ZAL and are expected to provide a significant reference for further rational engineering of ZHDs, which will ultimately contribute to addressing the health risks and food safety issues posed by ZEN-like mycotoxins.

Review of quantitative and functional lung imaging evidence of vaping-related lung injury.

Introduction: The pulmonary effects of e-cigarette use (or vaping) became a healthcare concern in 2019, following the rapid increase of e-cigarette-related or vaping-associated lung injury (EVALI) in young people, which resulted in the critical care admission of thousands of teenagers and young adults. Pulmonary functional imaging is well-positioned to provide information about the acute and chronic effects of vaping. We generated a systematic review to retrieve relevant imaging studies that describe the acute and chronic imaging findings that underly vaping-related lung structure-function abnormalities. Methods: A systematic review was undertaken on June 13th, 2023 using PubMed to search for published manuscripts using the following criteria: [("Vaping" OR "e-cigarette" OR "EVALI") AND ("MRI" OR "CT" OR "Imaging")]. We included only studies involving human participants, vaping/e-cigarette use, and MRI, CT and/or PET. Results: The search identified 445 manuscripts, of which 110 (668 unique participants) specifically mentioned MRI, PET or CT imaging in cases or retrospective case series of patients who vaped. This included 105 manuscripts specific to CT (626 participants), three manuscripts which mainly used MRI (23 participants), and two manuscripts which described PET findings (20 participants). Most studies were conducted in North America (n = 90), with the remaining studies conducted in Europe (n = 15), Asia (n = 4) and South America (n = 1). The vast majority of publications described case studies (n = 93) and a few described larger retrospective or prospective studies (n = 17). In e-cigarette users and patients with EVALI, key CT findings included ground-glass opacities, consolidations and subpleural sparing, MRI revealed abnormal ventilation, perfusion and ventilation/perfusion matching, while PET showed evidence of pulmonary inflammation. Discussion and conclusion: Pulmonary structural and functional imaging abnormalities were common in patients with EVALI and in e-cigarette users with or without respiratory symptoms, which suggests that functional MRI may be helpful in the investigation of the pulmonary health effects associated with e-cigarette use.

The cytosolic aminotransferase VAS1 coordinates aromatic amino acid biosynthesis and metabolism.

The aromatic amino acids (AAAs) phenylalanine, tyrosine, and tryptophan are basic protein units and precursors of diverse specialized metabolites that are essential for plant growth. Despite their significance, the mechanisms that regulate AAA homeostasis remain elusive. Here, we identified a cytosolic aromatic aminotransferase, REVERSAL OF SAV3 PHENOTYPE 1 (VAS1), as a suppressor of arogenate dehydrogenase 2 (adh2) in Arabidopsis (Arabidopsis thaliana). Genetic and biochemical analyses determined that VAS1 uses AAAs as amino donors, leading to the formation of 3-carboxyphenylalanine and 3-carboxytyrosine. These pathways represent distinct routes for AAA metabolism that are unique to specific plant species. Furthermore, we show that VAS1 is responsible for cytosolic AAA biosynthesis, and its enzymatic activity can be inhibited by 3-carboxyphenylalanine. These findings provide valuable insights into the crucial role of VAS1 in producing 3-carboxy AAAs, notably via recycling of AAAs in the cytosol, which maintains AAA homeostasis and allows plants to effectively coordinate the complex metabolic and biosynthetic pathways of AAAs.

Multitasking Pharmacophores Support Cabotegravir-Based Long-Acting HIV Pre-Exposure Prophylaxis (PrEP).

Cabotegravir is an integrase strand transfer inhibitor (INSTI) for HIV treatment and prevention. Cabotegravir-based long-acting pre-exposure prophylaxis (PrEP) presents an emerging paradigm for infectious disease control. In this scheme, a combination of a high efficacy and low solubility of anti-infection drugs permits the establishment of a pharmaceutical firewall in HIV-vulnerable groups over a long period. Although the structure-activity-relationship (SAR) of cabotegravir as an INSTI is known, the structural determinants of its low solubility have not been identified. In this work, we have integrated multiple experimental and computational methods, namely X-ray diffraction, solid-state NMR (SSNMR) spectroscopy, solution NMR spectroscopy, automated fragmentation (AF)-QM/MM and density functional theory (DFT) calculations, to address this question. The molecular organization of cabotegravir in crystal lattice has been determined. The combination of very-fast magic-angle-sample-spinning (VF MAS) SSNMR and solution NMR, as supported by AF-QM/MM and DFT calculations, permits the identification of structural factors that contribute to the low aqueous solubility of cabotegravir. Our study reveals the multitasking nature of pharmacophores in cabotegravir, which controls the drug solubility and, meanwhile, the biological activity. By unraveling these function-defining molecular features, our work could inspire further development of long-acting HIV PrEP drugs.

Unveiling a CAAX Protease-Like Protein Involved in Didemnin Drug Maturation and Secretion.

The assembly line biosynthesis of the powerful anticancer-antiviral didemnin cyclic peptides is proposed to follow a prodrug release mechanism in Tristella bacteria. This strategy commences with the formation of N-terminal prodrug scaffolds and culminates in their cleavage during the cellular export of the mature products. In this study, a comprehensive exploration of the genetic and biochemical aspects of the enzymes responsible for both the assembly and cleavage of the acylated peptide prodrug scaffolds is provided. This process involves the assembly of N-acyl-polyglutamine moieties orchestrated by the nonribosomal peptide synthetase DidA and the cleavage of these components at the post-assembly stage by DidK, a transmembrane CAAX hydrolase homolog. The findings not only shed light on the complex prodrug mechanism that underlies the synthesis and secretion of didemnin compounds but also offer novel insights into the expanded role of CAAX hydrolases in microbes. Furthermore, this knowledge can be leveraged for the strategic design of genome mining approaches aimed at discovering new bioactive natural products that employ similar prodrug biochemical strategies.

Accelerating the design of pili-enabled living materials using an integrative technological workflow.

Bacteria can be programmed to create engineered living materials (ELMs) with self-healing and evolvable functionalities. However, further development of ELMs is greatly hampered by the lack of engineerable nonpathogenic chassis and corresponding programmable endogenous biopolymers. Here, we describe a technological workflow for facilitating ELMs design by rationally integrating bioinformatics, structural biology and synthetic biology technologies. We first develop bioinformatics software, termed Bacteria Biopolymer Sniffer (BBSniffer), that allows fast mining of biopolymers and biopolymer-producing bacteria of interest. As a proof-of-principle study, using existing pathogenic pilus as input, we identify the covalently linked pili (CLP) biosynthetic gene cluster in the industrial workhorse Corynebacterium glutamicum. Genetic manipulation and structural characterization reveal the molecular mechanism of the CLP assembly, ultimately enabling a type of programmable pili for ELM design. Finally, engineering of the CLP-enabled living materials transforms cellulosic biomass into lycopene by coupling the extracellular and intracellular bioconversion ability.

Conserved Enzymatic Cascade for Bacterial Azoxy Biosynthesis.

Azoxy compounds exhibit a wide array of biological activities and possess distinctive chemical properties. Although there has been considerable interest in the biosynthetic mechanisms of azoxy metabolites, the enzymatic basis responsible for azoxy bond formation has remained largely enigmatic. In this study, we unveil the enzyme cascade that constructs the azoxy bond in valanimycin biosynthesis. Our research demonstrates that a pair of metalloenzymes, comprising a membrane-bound hydrazine synthase and a nonheme diiron azoxy synthase, collaborate to convert an unstable pathway intermediate to an azoxy product through a hydrazine-azo-azoxy pathway. Additionally, by characterizing homologues of this enzyme pair from other azoxy metabolite pathways, we propose that this two-enzyme cascade could represent a conserved enzymatic strategy for azoxy bond formation in bacteria. These findings provide significant mechanistic insights into biological N-N bond formation and should facilitate the targeted isolation of bioactive azoxy compounds through genome mining.

Enzymatic Photodecarboxylation on Secondary and Tertiary Carboxylic Acids.

Photoenzymatic decarboxylation of bulky secondary and tertiary carboxylic acids catalyzed by engineered Chlorella variabilis fatty acid photodecarboxylase (CvFAP) is reported. Rational design and directed evolution of wild-type CvFAP are used to improve the reactivity and expand potential applications. Moreover, engineered CvFAP can catalyze light-driven kinetic resolution of α-substituted carboxylic acid. Our work sheds light on the production of chiral building blocks and bioactive molecules from bulky carboxylic acids via the photoenzymatic way.

Reply to Correspondence on "Structural Insight into the Catalytic Mechanism of the Endoperoxide Synthase FtmOx1''.

The high-resolution X-ray crystal structure of the ternary complex FtmOx1 ⋅ 2OG ⋅ fumitremorgin B and the catalytic mechanism were recently reported by us (DOI 10.1002/anie.202112063). In their Correspondence, Zhang, Costello, Liu et al. criticize our work in several aspects. Herein, we address these questions one by one. These structural clarifications and new computational results further support the CarC-like mechanistic model.

Preparation and Characterization of Metal-Organic Framework Coatings for Improving Protein Crystallization Screening.

Modifying crystallization plates can significantly impact the success rate and quality of protein crystal growth, making it a helpful strategy in protein crystallography. However, appropriate methods for preparing nano-sized particles with a high specific surface area and strategies for applying these nanoparticles to form suitable coatings on crystallization plate surfaces still need to be clarified. Here, we utilized both an ultrasonic crusher and a high-pressure homogenizer to create a nano metal-organic framework (MOF), specifically HKUST-1, and introduced a solvent evaporation method for producing MOF coatings on 96-well crystallization plates to induce protein crystal growth. The morphology of MOF coatings on the resin surface of the plate well was characterized using optical and scanning electron microscopy. Compared to the control group, crystallization screening experiments on nine proteins confirmed the effectiveness of plates with MOF coatings. Applying MOF coatings to crystallization plates is an easy-to-use, time-efficient, and potent tool for initiating crystallization experiments.

Hydrogen sulfide functions as a micro-modulator bound at the copper active site of Cu/Zn-SOD to regulate the catalytic activity of the enzyme.

The present study examines whether there is a mechanism beyond the current concept of post-translational modifications to regulate the function of a protein. A small gas molecule, hydrogen sulfide (H2S), was found to bind at active-site copper of Cu/Zn-SOD using a series of methods including radiolabeled binding assay, X-ray absorption near-edge structure (XANES), and crystallography. Such an H2S binding enhanced the electrostatic forces to guide the negatively charged substrate superoxide radicals to the catalytic copper ion, changed the geometry and energy of the frontier molecular orbitals of the active site, and subsequently facilitated the transfer of an electron from the superoxide radical to the catalytic copper ion and the breakage of the copper-His61 bridge. The physiological relevance of such an H2S effect was also examined in both in vitro and in vivo models where the cardioprotective effects of H2S were dependent on Cu/Zn-SOD.

Tandem intermolecular [4 + 2] cycloadditions are catalysed by glycosylated enzymes for natural product biosynthesis.

Tandem Diels-Alder reactions are frequently used in the construction of polycyclic ring systems in complex organic compounds. Unlike the many Diels-Alderases (DAases) that catalyse a single cycloaddition, enzymes for multiple Diels-Alder reactions are rare. Here we demonstrate that two calcium-ion-dependent glycosylated enzymes, EupfF and PycR1, independently catalyse sequential, intermolecular Diels-Alder reactions in the biosynthesis of bistropolone-sesquiterpenes. We elucidate the origins of catalysis and stereoselectivity within these DAases through analysis of enzyme co-crystal structures, together with computational and mutational studies. These enzymes are secreted as glycoproteins with diverse N-glycans. The N-glycan at N211 in PycR1 significantly increases the affinity to the calcium ion, which in turn regulates the active cavity, making it specifically interact with substrates to accelerate the tandem [4 + 2] cycloaddition. The synergistic effect of the calcium ion and N-glycan on the catalytic centre of enzymes involved in secondary metabolism, especially for complex tandem reactions, can extend our understanding of protein evolution and improve the artificial design of biocatalysts.

Enzymatic cis-Decalin Formation in Natural Product Biosynthesis.

Stereoselective synthesis of cis-decalin structures using [4 + 2] cycloaddition is challenging. We explored the biosynthetic pathway of the fungal natural product fischerin (1) to identify a new pericyclase FinI that can catalyze such a reaction. The cocrystal structure of FinI, a predicted O-methyltransferase, with the product and SAM provides insight into cis-decalin formation in nature.

Enhanced Separation Performance of Hierarchically Porous Membranes Fabricated via the Combination of Crystallization Template and Foaming.

In this work, poly (vinylidene fluoride) (PVDF) hierarchically porous membranes (HPMs) with isolated large pores and continuous narrow nano-pores have been fabricated from its blend with poly (methyl methacrylate) (PMMA) based on the combination of crystallization template with chemical or supercritical CO2 foaming. On the one hand, the decomposition of azodicarbonamide (ADC, chemical foaming agent) or the release of CO2 can produce isolated large pores. On the other hand, PMMA is expelled during the isothermal crystallization of PVDF in their miscible blend, yielding narrow nano-pores upon etching with a selective solvent. In the case of supercritical CO2, the attained PVDF HPMs fail to improve separation performance because of the compact wall of isolated-large-pore and consequent poor connectivity of hierarchical pores. In the case of ADC, the optimal HPM exhibits much higher flux (up to 20 times) without any loss of selectivity compared with the reference only with nano-pores. The enhanced permeability can be attributed to the shorter diffusion length and lower diffusion barrier from isolated large pores, while the comparable selectivity is determined by narrow nano-pores in THE matrix.

Sensitive Organic Vapor Sensors Based on Flexible Porous Conductive Composites with Multilevel Pores and Thin, Rough, Hollow-Wall Structure.

Advanced organic vapor sensors that simultaneously have high sensitivity, fast response, and good reproducibility are required. Herein, flexible, robust, and conductive vapor-grown carbon fibers (VGCFs)-filled polydimethylsiloxane (PDMS) porous composites (VGCFs/PDMS sponge (CPS)) with multilevel pores and thin, rough, and hollows wall were prepared based on the sacrificial template method and a simple dip-spin-coating process. The optimized material showed outstanding mechanical elasticity and durability, good electrical conductivity and hydrophobicity, as well as excellent acid and alkali tolerance. Additionally, CPS exhibited good reproducible sensing behavior, with a high sensitivity of ~1.5 × 105 s-1 for both static and flowing organic vapor, which was not affected in cases such as 20% squeezing deformation or environment humidity distraction (20~60% RH). Interestingly, both the reproducibility and sensitivity of CPS were better than those of film-shaped VGCFs/PDMS (CP), which has a thickness of two hundred microns. Therefore, the contradiction between the reproducibility and high sensitivity was well-solved here. The above excellent performance could be ascribed to the unique porous structures and the rough, thin, hollow wall of CPS, providing various gas channels and large contact areas for organic vapor penetration and diffusion. This work paves a new way for developing advanced vapor sensors by optimizing and tailoring the pore structure.

Synthesis, Curing Behaviors and Properties of a Bio-Based Trifunctional Epoxy Silicone Modified Epoxy Thermosets.

Tremendous effort has been focused on improving the toughness of epoxy, but the common approaches diminish the mechanical properties. In this work, a new silicone-modified trifunctional epoxy monomer SITEUP is synthesized from the hydrosilylation transformation of eugenol epoxy (EPEU) and tris-(dimethylsiloxy)phenylsilane. The chemical structures and curing kinetics of SITEUP are investigated based on 1H-NMR, 13C-NMR, MADLI-TOF-MS, and DSC analyses. SITEUP is introduced into DGEBA/IPDA systems as a functional modifier in varied loadings for toughening the resulting epoxy thermosets. The impact strength of the modified epoxy thermosets containing 20% SITEUP is 84% higher than that of the pristine epoxy thermoset and also maintains high flexural strength. Further morphology study reveals that the plastic deformation caused by siloxane segments is the key factor accounting for the enhanced toughness of the finalized epoxy thermosets. Si-O-Si segments incorporated into the thermosetting network could absorb more energy by increasing the mobility of polymer chains under external stress and led to improved thermal stability and damping characteristics. In addition, SITEUP is able to decrease the surface tension and increase the hydrophobic properties of the resultant epoxy materials.

Coordination Switch Drives Selective C-S Bond Formation by the Non-Heme Sulfoxide Synthases.

The non-heme iron ergothioneine synthase (EgtB) is a sulfoxide synthase that catalyzes oxidative C-S bond formation in the synthesis of ergothioneine, which plays roles against oxidative stress in cells. Despite extensive experimental and computational studies of the catalytic mechanisms of EgtB, the root causes for the selective C-S bond formation remain elusive. Using quantum mechanics/molecular mechanics (QM/MM) calculations, we show herein that a coordination switch of the sulfoxide intermediate is involved in the catalysis of the non-heme iron EgtB. This coordination switch from the S to the O atom is driven by the S/π electrostatic interactions, which efficiently promotes the observed stereoselective C-S bond formation while bypassing cysteine dioxygenation. The present mechanism is in agreement with all available experimental data, including regioselectivity, stereoselectivity and KIE results. This match underscores the critical role of coordination switching in the catalysis of non-heme enzymes.

Deciphering the Reaction Pathway of Mononuclear Iron Enzyme-Catalyzed N≡C Triple Bond Formation in Isocyanide Lipopeptide and Polyketide Biosynthesis.

Despite the diversity of reactions catalyzed by 2-oxoglutarate-dependent nonheme iron (Fe/2OG) enzymes identified in recent years, only a limited number of these enzymes have been investigated in mechanistic detail. In particular, several Fe/2OG-dependent enzymes capable of catalyzing isocyanide formation have been reported. While the glycine moiety has been identified as a biosynthon for the isocyanide group, how the actual conversion is effected remains obscure. To elucidate the catalytic mechanism, we characterized two previously unidentified (AecA and AmcA) along with two known (ScoE and SfaA) Fe/2OG-dependent enzymes that catalyze N≡C triple bond installation using synthesized substrate analogues and potential intermediates. Our results indicate that isocyanide formation likely entails a two-step sequence involving an imine intermediate that undergoes decarboxylation-assisted desaturation to yield the isocyanide product. Results obtained from the in vitro experiments are further supported by mutagenesis, the product-bound enzyme structure, and in silico analysis.

Dioxane Bridge Formation during the Biosynthesis of Spectinomycin Involves a Twitch Radical S-Adenosyl Methionine Dehydrogenase That May Have Evolved from an Epimerase.

Spectinomycin is a dioxane-bridged, tricyclic aminoglycoside produced by Streptomyces spectabilis ATCC 27741. While the spe biosynthetic gene cluster for spectinomycin has been reported, the chemistry underlying construction of the dioxane ring is unknown. The twitch radical SAM enzyme SpeY from the spe cluster is shown here to catalyze dehydrogenation of the C2' alcohol of (2'R,3'S)-tetrahydrospectinomycin to yield (3'S)-dihydrospectinomycin as a likely biosynthetic intermediate. This reaction is radical-mediated and initiated via H atom abstraction from C2' of the substrate by the 5'-deoxyadenosyl radical equivalent generated upon reductive cleavage of SAM. Crystallographic analysis of the ternary Michaelis complex places serine-183 adjacent to C2' of the bound substrate opposite C5' of SAM. Mutation of this residue to cysteine converts SpeY to the corresponding C2' epimerase mirroring the opposite phenomenon observed in the homologous twitch radical SAM epimerase HygY from the hygromycin B biosynthetic pathway. Phylogenetic analysis suggests a relatively recent evolutionary branching of putative twitch radical SAM epimerases bearing homologous cysteine residues to generate the SpeY clade of enzymes.