RESUMO
Photonic Chern insulators are known for their topological chiral edge states (CESs), whose absolute existence is determined by the bulk band topology, but concrete dispersion can be engineered to exhibit various properties. For example, the previous theory suggested that the edge dispersion can wind many times around the Brillouin zone to slow down light, which can potentially overcome fundamental limitations in conventional slow-light devices: narrow bandwidth and keen sensitivity to fabrication imperfection. Here, we report the first experimental demonstration of this idea, achieved by coupling CESs with resonance-induced nearly flat bands. We show that the backscattering-immune hybridized CESs are significantly slowed down over a relatively broad bandwidth. Our work thus paves an avenue to broadband topological slow-light devices.
RESUMO
Quantum Hall systems host chiral edge states extending along the one-dimensional boundary of any two-dimensional sample. In solid state materials, the edge states serve as perfectly robust transport channels that produce a quantized Hall conductance; due to their chirality, and the topological protection by the Chern number of the bulk band structure, they cannot be spatially localized by defects or disorder. Here, we show experimentally that the chiral edge states of a lossy quantum Hall system can be localized. In a gyromagnetic photonic crystal exhibiting the quantum Hall topological phase, an appropriately structured loss configuration imparts the edge states' complex energy spectrum with a feature known as point-gap winding. This intrinsically non-Hermitian topological invariant is distinct from the Chern number invariant of the bulk (which remains intact) and induces mode localization via the "non-Hermitian skin effect." The interplay of the two topological phenomena-the Chern number and point-gap winding-gives rise to a non-Hermitian generalization of the paradigmatic Chern-type bulk-boundary correspondence principle. Compared to previous realizations of the non-Hermitian skin effect, the skin modes in this system have superior robustness against local defects and disorders.
RESUMO
Solar-blind ultraviolet (SBUV) to near-infrared (NIR) broadband photodetectors (BB-PD) have important applications in environmental monitoring and other applications. However, it is challenging to prepare SBUV-IR photosensitive materials via simple steps and to construct SBUV-IR broadband devices for multiplex detection with high sensitivity at different wavelengths. Here, self-powered and broadband photodetectors using a high-performance mixed dimensional Sb2O3 nanorod 1-dimension (1D)/monodisperse microdiamond-like PdTe2 3-dimension (3D)/Si (3D) heterojunction for multiplex detection of environmental pollutants with high sensitivity at broadband wavelength are developed. The 1D/3D mixed dimensional Sb2O3/PdTe2/Si structure combines the advantages of strong light absorption, high carrier transport efficiency of 1D Sb2O3 nanorods, and expansion of interface barrier caused by 3D microdiamond-like PdTe2 interlayer to improve the photocurrent density and self-powered ability. The efficient photogenerated charge separation enables anon/off ratio of more than 5 × 106. The device exhibits excellent photoelectric properties from 255 to 980 nm with the responsivity from 4.56 × 10-2 to 6.55 × 10-1 AW-1, the detectivity from 2.36 × 1012 to 3.39 × 1013 Jones, and the sensitivity from 3.90 × 107 to 1.10 × 1010 cm2 W-1 without external bias. Finally, the proposed device is applied for the multiplex monitoring of environmental pollution gases NO2 with the detection limit of 200 ppb and PM2.5 particles at mild pollution at broadband wavelength. The proposed BB-PD has great potential for multiplex detection of environmental pollutants and other analytes at broadband wavelength.
RESUMO
Self-assembled photonic structures have greatly expanded the paradigm of optical materials due to their ease of access, the richness of results offered and the strong interaction with light. Among them, photonic heterostructure shows unprecedent advances in exploring novel optical responses that only can be realized by interfaces or multiple components. In this work, we realize visible and infrared dual-band anti-counterfeiting using metamaterial (MM) - photonic crystal (PhC) heterostructures for the first time. Sedimentation of TiO2 nanoparticles in horizontal mode and polystyrene (PS) microspheres in vertical mode self-assembles a van der Waals interface, connecting TiO2 MM to PS PhC. Difference of characteristic length scales between two components support photonic bandgap engineering in the visible band, and creates a concrete interface at mid-infrared to prevent interference. Consequently, the encoded TiO2 MM is hidden by structurally colored PS PhC and visualized either by adding refractive index matching liquid or by thermal imaging. The well-defined compatibility of optical modes and facility in interface treatments further paves the way for multifunctional photonic heterostructures.
RESUMO
Chiral edge states that propagate oppositely at two parallel strip edges are a hallmark feature of Chern insulators which were first proposed in the celebrated two-dimensional (2D) Haldane model. Subsequently, counterintuitive antichiral edge states that propagate in the same direction at two parallel strip edges were discovered in a 2D modified Haldane model. Recently, chiral surface states, the 2D extension of one-dimensional (1D) chiral edge states, have also been observed in a photonic analogue of a 3D Haldane model. However, despite many recent advances in antichiral edge states and chiral surface states, antichiral surface states, the 2D extension of 1D antichiral edge states, have never been realized in any physical system. Here, we report the experimental observation of antichiral surface states by constructing a 3D modified Haldane model in a magnetic Weyl photonic crystal with two pairs of frequency-shifted Weyl points (WPs). The 3D magnetic Weyl photonic crystal consists of gyromagnetic cylinders with opposite magnetization in different triangular sublattices of a 3D honeycomb lattice. Using microwave field-mapping measurements, unique properties of antichiral surface states have been observed directly, including the antichiral robust propagation, tilted surface dispersion, a single open Fermi arc connecting two projected WPs and a single Fermi loop winding around the surface Brillouin zone (BZ). These results extend the scope of antichiral topological states and enrich the family of magnetic Weyl semimetals.
RESUMO
MXene aerogels with a three-dimensional (3D) network structure have attracted increasing attention for lightweight electromagnetic wave absorbers. It is intriguing to expand their absorption band, i.e., to the booming terahertz (THz) region, and explore multifunctionality. Herein, we assemble MXene (Ti3C2Tx)-based hybrid aerogels into an aligned lamellar architecture using a bidirectional freezing technique. With air pore size and lamellar layer spacing comparable to THz wavelengths, high porosity of the aerogels allows nearly isotropic absorption of 99% and electromagnetic interference (EMI) shielding effectiveness with a remarkable value of 57.5 dB, in the ultrabroad bandwidth ranging from 0.5 to 3.0 THz. Simultaneous, strain-sensing response reflects the macroscopic anisotropy of the network structure of the aerogels. The improved sensitivity is measured for the out-of-lamellar layer plane under 0-30% strain. The corresponding long-term stability and durability persist over 120 stretching-releasing cycles. Our findings thus not only expand multiple functions of MXene in an anisotropic 3D macroscopic form but also clarify its nearly isotropic absorption in the THz band.
RESUMO
The paradigmatic example of a topological phase of matter, the two-dimensional Chern insulator1-5, is characterized by a topological invariant consisting of a single integer, the scalar Chern number. Extending the Chern insulator phase from two to three dimensions requires generalization of the Chern number to a three-vector6,7, similar to the three-dimensional (3D) quantum Hall effect8-13. Such Chern vectors for 3D Chern insulators have never been explored experimentally. Here we use magnetically tunable 3D photonic crystals to achieve the experimental demonstration of Chern vectors and their topological surface states. We demonstrate Chern vector magnitudes of up to six, higher than all scalar Chern numbers previously realized in topological materials. The isofrequency contours formed by the topological surface states in the surface Brillouin zone form torus knots or links, whose characteristic integers are determined by the Chern vectors. We demonstrate a sample with surface states forming a (2, 2) torus link or Hopf link in the surface Brillouin zone, which is topologically distinct from the surface states of other 3D topological phases. These results establish the Chern vector as an intrinsic bulk topological invariant in 3D topological materials, with surface states possessing unique topological characteristics.
RESUMO
"Magneto-optical" effect refers to a rotation of polarization plane, which has been widely studied in traditional ferromagnetic metal and insulator films and scarcely in two-dimensional layered materials. Here, we uncover a new nonreciprocal magnetophonon Raman scattering effect in ferromagnetic few-layer CrI3 We observed a rotation of the polarization plane of inelastically scattered light between -20o and +60o that are tunable by an out-of-plane magnetic field from -2.5 to 2.5 T. It is experimentally observed that the degree of polarization can be magnetically manipulated between -20 and 85%. This work raises a new magneto-optical phenomenon and could create opportunities of applying two-dimensional ferromagnetic materials in Raman lasing, topological photonics, and magneto-optical modulator for information transport and storage.
RESUMO
Unconventional Weyl points (WPs), carrying topological charge 2 or higher, possess interesting properties different from ordinary charge-1 WPs, including multiple Fermi arcs that stretch over a large portion of the Brillouin zone. Thus far, such WPs have been observed in chiral materials and acoustic metamaterials, but there has been no clean demonstration in photonics in which the unconventional photonic WPs are separated from trivial bands. We experimentally realize an ideal symmetry-protected photonic charge-2 WP in a three-dimensional topological chiral microwave metamaterial. We use field mapping to directly observe the projected bulk dispersion, as well as the two long surface arcs that form a noncontractible loop wrapping around the surface Brillouin zone. The surface states span a record-wide frequency window of around 22.7% relative bandwidth. We demonstrate that the surface states exhibit a novel topological self-collimation property and are robust against disorder. This work provides an ideal photonic platform for exploring fundamental physics and applications of unconventional WPs.
RESUMO
Recent studies have revealed the counterintuitive possibility that increasing disorder can turn a topologically trivial insulator into a nontrivial insulator, called a topological Anderson insulator (TAI). Here, we propose and experimentally demonstrate a photonic TAI in a two-dimensional disordered gyromagnetic photonic crystal in the microwave regime. We directly observe the disorder-induced topological phase transition from a trivial insulator to a TAI with robust chiral edge states. We also demonstrate topological heterostructures that host edge states at interfaces between domains with different disorder parameters.
RESUMO
The current understanding of topological insulators and their classical wave analogs, such as photonic topological insulators, is mainly based on topological band theory. However, standard band theory does not apply to amorphous phases of matter, which are formed by non-crystalline lattices with no long-range positional order but only short-range order, exhibiting unique phenomena such as the glass-to-liquid transition. Here, we experimentally investigate amorphous variants of a Chern number-based photonic topological insulator. By tuning the disorder strength in the lattice, we demonstrate that photonic topological edge states can persist into the amorphous regime prior to the glass-to-liquid transition. After the transition to a liquid-like lattice configuration, the signatures of topological edge states disappear. This interplay between topology and short-range order in amorphous lattices paves the way for new classes of non-crystalline topological photonic bandgap materials.
RESUMO
At photonic Dirac points, electromagnetic waves are governed by the same equations as two-component massless relativistic fermions. However, photonic Dirac points are known to occur in pairs in "photonic graphene" and other similar photonic crystals, which necessitates special precautions to excite only one valley state. Systems hosting unpaired photonic Dirac points are significantly harder to realize, as they require broken time-reversal symmetry. Here, we report on the observation of an unpaired Dirac point in a planar two-dimensional photonic crystal. The structure incorporates gyromagnetic materials, which break time-reversal symmetry; the unpaired Dirac point occurs when a parity-breaking parameter is fine-tuned to a topological transition between a photonic Chern insulator and a conventional photonic insulator phase. Evidence for the unpaired Dirac point is provided by transmission and field-mapping experiments, including a demonstration of strongly non-reciprocal reflection. This unpaired Dirac point may have applications in valley filters and angular selective photonic devices.
RESUMO
Valley pseudospin in two-dimensional (2D) transition-metal dichalcogenides (TMDs) allows optical control of spin-valley polarization and intervalley quantum coherence. Defect states in TMDs give rise to new exciton features and theoretically exhibit spin-valley polarization; however, experimental achievement of this phenomenon remains challenges. Here, we report unambiguous valley pseudospin of defect-bound localized excitons in CVD-grown monolayer MoS2; enhanced valley Zeeman splitting with an effective g-factor of -6.2 is observed. Our results reveal that all five d-orbitals and the increased effective electron mass contribute to the band shift of defect states, demonstrating a new physics of the magnetic responses of defect-bound localized excitons, strikingly different from that of A excitons. Our work paves the way for the manipulation of the spin-valley degrees of freedom through defects toward valleytronic devices.
RESUMO
Chiral edge states are a hallmark feature of two-dimensional topological materials. Such states must propagate along the edges of the bulk either clockwise or counterclockwise, and thus produce oppositely propagating edge states along the two parallel edges of a strip sample. However, recent theories have predicted a counterintuitive picture, where the two edge states at the two parallel strip edges can propagate in the same direction; these anomalous topological edge states are named as antichiral edge states. Here, we report the experimental observation of antichiral edge states in a gyromagnetic photonic crystal. The crystal consists of gyromagnetic cylinders in a honeycomb lattice, with the two triangular sublattices magnetically biased in opposite directions. With microwave measurement, unique properties of antichiral edge states have been observed directly, which include tilted dispersion, chiral-like robust propagation in samples with certain shapes, and 100% scattering into backward bulk states at certain terminations. These results extend and supplement the current understanding of chiral edge states.
RESUMO
Atmospheric windows play an important role in the field of infrared detection and radiative cooling. In this paper, the development of VO2-based metamaterial emitter brings broadband thermal-switching light to mid-infrared atmospheric windows. At room temperature, the emitter radiates light in both 3-5µm and 8-14µm atmospheric windows. At high temperature, the radiation peaks move out of the atmospheric windows and result a strong radiation at 5-8µm. The underlying mechanism relies on the relationship between VO2 metal-insulator transition (MIT) and resonant absorption modes coupling. Corresponding thermal imaging experiment exhibits two distinct phenomena. One is the observation of unchanged thermal radiation around MIT temperature. The other phenomenon regards the concealment of the emitter from Al background at specific temperatures. These two phenomena show potential application in infrared anti-detection.
RESUMO
Wave modulating is one of the most interesting applications of metasurfaces. It requires an effective method to design metasurfaces with arbitrary space-variant phase. In this paper, we proposed an optimized design method for arbitrarily modulating wave based on the Genetic Algorithm, which is efficient to optimize designated radiation patterns according to application requirements. In order to verify the availability of the method, wave modulating of single lobe radiation at 10 GHz and broadband 3-lobes radiation at X band are optimized. For wave modulating of single lobe radiation, eight basic codes are chosen to excite the specific phases evenly dispersed from 0 to 2π for smooth phase gradient, and the 8 × 8, 20 × 20 and 40 × 40 arrays of the basic codes are optimized. It proves that the wave modulation accuracy is enhancing with the increase of elements quantity. For wave modulating of 3-lobes radiation, the 20 × 20 arrays are proposed and optimized, and their basic codes are increased to 32 for meeting the broadband requirement. Its broadband wave modulating has been verified by simulation and experiment, and it is shown that the directional 3-lobes radiation patterns keeps nearly stable within the broadband frequency range of 8.7-11.3 GHz.
RESUMO
In this paper, we fabricated a series of FeCoBSi multistoried patterned magnetic films with different thickness by traditional UV lithography method and DC sputtering deposition. Broad resonance band phenomenon was observed during high frequency property characterization, with full width half maximum (FWHM) of 4 GHz when the film thickness is 45 nm. The broad resonance band effect was contributed to the existence of multiple resonance peaks due to different stripe width of the combined stripe pattern, which induced distinguish shape anisotropic field in each stripe. Each resonance peak was independent due to the gap between the stripes, leading to a controllable method to tune the microwave properties of such structure. With thickness varied, the resonance band could be altered according to the mathematic prediction. This work presents an effective method for tuning the microwave resonance characterization in magnetization dynamic.
RESUMO
Surface plasmon polaritons (SPPs) and standing wave modes provide interesting and exotic properties for infrared metamaterial absorbers. Coupling of these modes promises further development in this field but restricted by the complexity of modes analysis. In this work, we investigate the general phenomenon of modes coupling supported by a metal (with grating)-dielectric-metal sandwich structure based on rigorous coupled-wave analysis (RCWA) method and experiment results. Through the analysis of fundamental modes, a new approach based on the boundary conditions is introduced to reveal the coupling mechanism and the corresponding resonance shifting phenomenon with simple but rigorous derivations. The strong coupling between SPPs excited on the dielectric-metal interfaces and rigorous modes of standing waves in the dielectric layer can be manipulated to improve the detection sensitivity of sensors and emissivity efficiency of infrared emitters.
RESUMO
Owing to their prominent stability and CMOS compatibility, HfO2-based ferroelectric films have attracted great attention as promising candidates for ferroelectric random-access memory applications. A major reliability issue for HfO2 based ferroelectric devices is fatigue. So far, there have been a few studies on the fatigue mechanism of this material. Here, we report a systematic study of the fatigue mechanism of yttrium-doped hafnium oxide (HYO) ferroelectric thin films deposited by pulsed laser deposition. The influence of pulse width, pulse amplitude and temperature on the fatigue behavior of HYO during field cycling is studied. The temperature dependent conduction mechanism is characterized after different fatigue cycles. Domain wall pinning caused by carrier injection at shallow defect centers is found to be the major fatigue mechanism of this material. The fatigued device can fully recover to the fatigue-free state after being heated at 90 °C for 30 min, confirming the shallow trap characteristic of the domain wall pinning defects.
RESUMO
One of the challenges in the design of microwave absorbers lies in tunable amplitude of dynamic permeability. In this work, we demonstrate that electric-field-induced magnetoelastic anisotropy in nano-granular film FeCoB-SiO2/PMN-PT (011) composites can be used to tune the amplitude of ferromagnetic resonance peak at room temperature. The FeCoB magnetic particles are separated from each other by SiO2 insulating matrix and present slightly different in-plane anisotropy fields. As a result, multi-resonances appear in the imaginary permeability (µâ³) curve and mixed together to form a broadband absorption peak. The amplitude of the resonance peak could be modulated by external electric field from 118 to 266.