Preparation and Characterization of Nano-Fe3O4 and Its Application for C18-Functionalized Magnetic Nanomaterials Used as Chromatographic Packing Materials.

A new type of magnetic nanomaterial with Fe3O4 as the core and organic polymer as the shell was synthesized by seed emulsion polymerization. This material not only overcomes the problem of insufficient mechanical strength of the organic polymer, it also solves the problem that Fe3O4 is prone to oxidation and agglomeration. In order to make the particle size of Fe3O4 meet the requirement of the seed, the solvothermal method was used to prepare Fe3O4. The effects of the reaction time, amount of solvent, pH value, and polyethylene glycol (PEG) on the particle size of Fe3O4 were investigated. In addition, in order to accelerate the reaction rate, the feasibility of preparing Fe3O4 by microwave was studied. The results showed that under the optimum conditions, the particle size of Fe3O4 could reach 400 nm and had good magnetic properties. After three stages of oleic acid coating, seed emulsion polymerization, and C18 modification, the obtained C18-functionalized magnetic nanomaterials were used for the preparation of the chromatographic column. Under optimal conditions, stepwise elution significantly shortened the elution time of sulfamethyldiazine, sulfamethazine, sulfamethoxypyridazine, and sulfamethoxazole while still achieving a baseline separation.

Comparative Outcomes of Block and Cancellous Iliac Bone Grafting in Older Unilateral Alveolar Cleft Patients.

OBJECTIVE: To compare osseous outcomes of block and cancellous iliac bone grafting in older unilateral alveolar cleft patients. DESIGN: Retrospective and observational follow-up study. SETTING: Cleft Lip and Palate Centre, Department of Oral and Maxillofacial Surgery, Affiliated Hospital of Stomatology, Nanjing Medical University, China. PATIENTS: Forty-five nonsyndromic patients with unilateral complete alveolar cleft were enrolled in this study (25 patients in block bone graft group and 20 patients in cancellous bone graft group). INTERVENTIONS: In cancellous bone graft group, the alveolar cleft was filled with iliac cancellous bone particulate. In group of block bone graft, the harvested bone block was trimmed and fixed in alveolar defect. MAIN OUTCOME MEASURES: A novel method was proposed to investigate the volume and density of residual bone graft at 1-week, 3- and 6-month, 1- and 2-year postoperatively based on cone beam computed tomography scans. RESULTS: No difference in bone graft volume was found between 2 groups at 1-week and 3-month postoperatively; however, the residual volume of block bone graft group was significantly larger than that of cancellous bone graft group at 6-month, 1- and 2-year postoperatively. The bone density of block bone graft group was lower at 1-week and 3-month postoperatively but was comparable at 6-month, 1- and 2-year postoperatively. Our method was reliable and accurate to identify the range of residual bone graft when the boundary of grafted bone could not be identified clearly. CONCLUSION: Block bone graft could achieve comparable bone density and retain a greater amount of residual bone comparing to cancellous bone graft.

Inactivation of RUNX3 protein expression in tongue squamous cell carcinoma and its association with clinicopathological characteristics.

The function of runt­related transcription factor 3 (RUNX3) in oral cancer remains controversial. The present study aimed to determine the status of RUNX3 protein expression and its association with clinicopathological characteristics in tongue squamous cell carcinomas (SCC). The present study used three pairs of tongue SCC and non­cancerous tissues to assess RUNX3 protein expression by western blot analysis, and two tongue SCC cell lines to determine RUNX3 protein localization by immunofluorescence and immunocytochemistry. Tissue microarray immunohistochemistry was performed to detect the clinical relevance of RUNX3 in 79 patients with tongue SCC. The results demonstrated that RUNX3 protein expression was reduced in tongue SCC tissues compared with in paired non­cancerous tissues. Similarly, the expression of RUNX3 was low in SCC25 and Cal27 cells, and was predominantly localized to the cytoplasm. In the 79 patients with tongue SCC, RUNX3 protein expression was presented in different manners in carcinoma nests and tumor stroma. RUNX3 in carcinoma nests (nRUNX3) exhibited nuclear positive staining in 24/79 samples, cytoplasmic mislocalization in 41/79 samples and was undetectable in 14/79 samples. RUNX3 in stroma (sRUNX3) exhibited nuclear positive staining in 40/79 samples and nuclear negative staining in 39/79 samples. Negative nRUNX3 expression was significantly associated with lymph node metastasis (P=0.014), clinical stage (P=0.027), and overall and disease­free survival (P=0.008 and P=0.007, respectively). In addition, negative sRUNX3 expression was associated with lymph node metastasis (P=0.003) and clinical stage (P=0.003); however, not with overall survival. The findings of the present study preliminarily suggested that cytoplasmic mislocalization of RUNX3 protein may be a common event in tongue SCC, and that sRUNX3 protein expression may be a potential prognostic biomarker.

RUNX3 plays a tumor suppressor role by inhibiting cell migration, invasion and angiogenesis in oral squamous cell carcinoma.

Although aberrant expression of Runt-related transcription factor 3 (RUNX3) contributes to tumor progression and metastasis in a number of carcinomas, the status of RUNX3 and its correlation with prognosis in oral squamous cell carcinomas (OSCC) are still controversial. The aim of present study was to investigate the function of RUNX3 in OSCC and the underlying molecular mechanisms. Tissue microarray (TMA) consisting of 232 OSCC specimens was used to detect the expression of RUNX3 by immunohistochemistry method. The effects of RUNX3 restoration on OSCC cell migration and invasion were determined by wound-healing assay, migration and Matrigel cell invasion assays. The antiangiogenic role of RUNX3 was analyzed by testing proliferation and tube formation of human umbilical vascular endothelial cells (HUVECs) cultured with conditioned medium from RUNX3 transfected OSCC cell lines. The activities of MMP-9 and VEGF in RUNX3 transfected OSCC cell lines were examined by western blot and Elisa methods. RUNX3 expression was reduced in OSCC specimens and significantly associated with tumor size (P=0.002), lymph node statue (P=0.0036) and clinical stage (P=0.0001). Negative expression of RUNX3 correlated with worse 5-year overall and disease-specific survival rates (P=0.0348 and P=0.0301, respectively). Furthermore, we found that RUNX3 restoration suppressed cell migration and invasion through downregulating MMP-9 expression and secretion, and exerted antiangiogenic capability by inhibiting VEGF activity in HN6 and Cal27 cells. These findings suggested that RUNX3 played a tumor suppressor role in OSCC by inhibiting cell migration, invasion and angiogenesis, supporting that it could be a potential therapeutic target for OSCC.

Anatomical Study and Clinical Application of Facial Artery Perforator Flaps in Intraoral Reconstruction: Focusing on Venous System.

PURPOSE: Facial artery perforator flaps (FAPFs) are preferred for the repair of intraoral and peri-nasal defects because it is a convenient procedure with minimal donor-site morbidity. The purpose of this study was to investigate the anatomic features of FAPFs and present their clinical application in intraoral reconstruction. MATERIALS AND METHODS: Five cadaver specimens (10 sides) of the head and neck region and 90 clinical cases (90 sides) of neck dissection were analyzed to explore the facial venous drainage system of FAPFs. In addition, anatomic features of the facial artery and vein and the marginal mandibular branch of the facial nerve were investigated in cadaver specimens. Furthermore, the authors reviewed a series of 33 intraoral reconstruction cases using their designed FAPFs focusing on flap survival and facial venous drainage system types. RESULTS: Based on cadaveric and clinical observations, the facial vein drainage system was divided into 3 types: type A drained into the internal jugular vein (47%); type B drained into the external jugular vein (37%); and type C drained into the anterior jugular vein (16%). The mean distances from the facial artery to the vein at the region of the FAPF pedicle and tip were 2.79 ± 0.51 and 10.24 ± 0.70 mm, respectively. Most cases using the authors' designed FAPFs yielded satisfactory esthetic and functional outcomes, whereas 3 cases presented with venous congestion from type C facial vein drainage. CONCLUSION: This study improved the understanding of the anatomic features and clinical application of FAPFs in intraoral reconstruction. This FAPF design could be used to achieve superior intraoral defect reconstruction, and type C facial vein drainage might be a risk factor for flap survival.

Short-term effects of repetitive transcranial magnetic stimulation on sleep bruxism - a pilot study.

The purpose of this study was to investigate the effects of repetitive transcranial magnetic stimulation (rTMS) on patients with sleep bruxism (SB). Twelve patients with SB were included in an open, single-intervention pilot study. rTMS at 1 Hz and an intensity of 80% of the active motor threshold was applied to the 'hot spot' of the masseter muscle representation at the primary motor cortex bilaterally for 20 min per side each day for 5 consecutive days. The jaw-closing muscle electromyographic (EMG) activity during sleep was recorded with a portable EMG recorder at baseline, during rTMS treatment and at follow-up for 5 days. In addition, patients scored their jaw-closing muscle soreness on a 0-10 numerical rating scale (NRS). Data were analysed with analysis of variance. The intensity of the EMG activity was suppressed during and after rTMS compared to the baseline (P = 0.04; P = 0.02, respectively). The NRS score of soreness decreased significantly during and after rTMS compared with baseline (P < 0.01). These findings indicated a significant inhibition of jaw-closing muscle activity during sleep along with a decrease of muscle soreness. This pilot study raises the possibility of therapeutic benefits from rTMS in patients with bruxism and calls for further and more controlled studies.

Computer-aided design-based preoperative planning of screw osteosynthesis for type B condylar head fractures: A preliminary study.

OBJECTIVE: To investigate the clinical application of a new computer-aided design - (CAD) based planning method for the treatment of type B condylar head fractures without fragmentation. METHODS: A total of 13 adult patients (19 sides) with type B condylar head fractures were included in the study. In all cases, imaging was performed using cone bean computed tomography (CBCT) preoperative, and Digital Imaging and Communications in Medicine (DICOM) files were imported into Simplant 11.04 software. The fracture of the mandibular condyle was reconstructed by a three-dimensional reconstruction module, and the simulation of reduction was achieved according to the morphological characteristics. Preoperative design was performed based on the CAD technology, and the three-dimensional interface was used to determine the length, location, and orientation of the positional screw. Osteosynthesis was performed with a single positional screw according to the optimum direction assessed in the preoperative planning CBCT, and the result was confirmed with postoperative CBCT scans and clinical follow-up. RESULTS: Preoperative computer-aided design was able to predict the length, location, and direction of the positional screw. Postoperative CBCT results demonstrated that 12 cases (18 sides) were consistent with preoperative design with exception of one case (one side) due to unexpected rupture of the fragment. Six-month follow-up showed the condylar fractures were anatomically repositioned and that healing was excellent in 12 cases (18 sides) with minor displacement and resorption in one case (one side). Postoperative occlusion in all cases was excellent, and the maximum mouth opening improved from mean 1.2 cm preoperatively to a of mean 4.3 cm at 6 months postoperatively. The data for mandibular movements at 6 months postoperatively demonstrated the recovery of protrusion, without higher grade limitations for laterotrusion. In one case, there appeared to be mandibular deviation (<0.5 cm) with mouth opening. CONCLUSION: The new preoperative design provides relevant data for screw osteosynthesis to enhance the precision and effectiveness of open reduction and internal fixation type B condylar head fractures.

Accurate Evaluation of Cone-Beam Computed Tomography to Volumetrically Assess Bone Grafting in Alveolar Cleft Patients.

OBJECTIVE: The aim of this study was to investigate the accuracy of cone-beam computed tomography (CBCT) to assess the volume of bone graft in alveolar cleft patients. MATERIALS AND METHODS: Twelve patients of unilateral alveolar cleft were included in this study. All patients were taken CBCT preoperative and 1 week postoperative. The digital imaging and communications in medicine (DICOM) files were imported into Simplant software and three-dimensional (3D) reconstruction of the alveolar defect was achieved. With 3D volumetric measurements module, the volume of alveolar cleft was calculated preoperatively. During operation, the syringe compression method was adopted to calculate the actual amount of bone graft. One week postoperative, CBCT scan was performed again to measure the bone volume grafted to the defect. The volumetric ratio of the syringe compression method to preoperative CBCT assessment and the volume difference between syringe compression method and postoperative CBCT assessment were analyzed to evaluate the accuracy of CBCT measurement. RESULTS: The 3D structure of the alveolar cleft and the boundary of bone graft was clear from CBCT images. The estimated volume of alveolar cleft by preoperative CBCT scans was 1.06 ±â€Š0.09 cm, and the actual amount of bone graft determined by the syringe compression method was 1.51 ±â€Š0.12 cm. The ratio between the latter to the former was 1.43 ±â€Š0.07. The calculated volume of bone graft by 1-week postoperative CBCT scans was 1.53 ±â€Š0.11 cm, with no significant difference compared with the actual amount of bone graft (P > 0.05). CONCLUSIONS: CBCT was an accurate measurement to calculate the volume of alveolar defect and bone graft in alveolar cleft patients. Preoperative scans could aid in quantitatively determining the bone amount needed to adequately fill the bone defect, and the postoperative scans give accurate follow-up evaluation after surgery.

A new design of facial artery perforator flaps for the reconstruction of small- to medium-sized intraoral defects.

AIM: The aim of this study was to investigate the reliability and outcomes of a new design of facial artery perforator flaps, extending from the angle of the mouth to the border of the mandible, for the reconstruction of small- to medium-sized intraoral defects. PATIENTS AND METHODS: The technique had been used in 23 patients between February 2009 and August 2012. The locations of intraoral defects included the tongue, the floor of the mouth, the inferior gingival mucosa, and the sublingual gland. All flaps were monitored for complications including skin loss and ischemia. The functions of appearance, swallowing, and speech were assessed 6 months after operation with the University of Washington Quality of Life Questionnaire. RESULTS: All flaps presented with satisfactory results except for one, which demonstrated superficial tip necrosis that settled after conservative treatment. The follow-up period ranged from 6 to 12 months, and 1 patient died as a result of pulmonary metastasis, and 3 patients underwent second surgery because of local tumor recurrence (2patients) and cervical recurrence (1 patient). Nineteen patients were assessed with the University of Washington Quality of Life Questionnaire, and the mean (SD) scores of appearance, swallowing, and speech were 57.89 (14.45), 83.68 (19.98), and 81.58 (23.16), respectively. CONCLUSIONS: This design of facial artery perforator flaps could provide an efficient and cost-effective method for reconstruction of small- to medium-sized intraoral defects with a low surgical morbidity and satisfactory levels of quality of life.

A novel two-dimensional metal-organic supramolecular framework including π-π stacking and hydrogen-bond interactions.

[µ-N,N'-Bis(pyridin-3-yl)benzene-1,4-dicarboxamide-1:2κ(2)N:N']bis{[N,N'-bis(pyridin-3-yl)benzene-1,4-dicarboxamide-κN]diiodidomercury(II)}, [Hg2I4(C18H14N4O2)3], is an S-shaped dinuclear molecule, composed of two HgI2 units and three N,N'-bis(pyridin-3-yl)benzene-1,4-dicarboxamide (L) ligands. The central L ligand is centrosymmetric and coordinated to two Hg(II) cations via two pyridine N atoms, in a syn-syn conformation. The two terminal L ligands are monodentate, with one uncoordinated pyridine N atom, and each adopts a syn-anti conformation. The HgI2 units show highly distorted tetrahedral (sawhorse) geometry, as the Hg(II) centres lie only 0.34 (2) or 0.32 (2) Šfrom the planes defined by the I and pyridine N atoms. Supramolecular interactions, thermal stability and solid-state luminescence properties were also measured.