Stereotactic Surgery of Parkinson's Disease with Magnetic Resonance Imaging under Three-Dimensional Mark Point Positioning Algorithm.

This research aimed to study the application of magnetic resonance imaging (MRI) under three-dimensional mark point positioning algorithm in stereotactic surgery for Parkinson's disease (PD) and improve clinical treatment effect. Eighty patients with PD in Tianjin Medical University General Hospital were selected as the research objects and randomly divided into two groups. The three-dimensional mark point positioning algorithm was applied to perform feature positioning on the MRI images of PD patients, and the international unified Parkinson's disease rating scale (UPDRS) was assessed before and after single-target surgery of the two groups. There was a significant difference in the postoperative treatment effect between the two groups compared with the preoperative one (P < 0.05). Among the patients in the observation group, 37 cases were marked as markedly effective, accounting for 92.5% of the total group; 1 case was ineffective and 2 cases were improved, accounting for 2.5% and 5%, respectively. In the control group, 35, 2, and 3 cases were assessed as markedly effective, ineffective, and improved, accounting for 87.5%, 5%, and 7.5%, respectively. The overall curative effect of the observation group was better than that of the control group, and the difference was significant (P < 0.05). The MRI manifestations of PD patients were diversified. MRI under the three-dimensional mark point positioning algorithm had a high value for the stereotactic treatment of PD patients, which was beneficial to the clinical surgery.

Design and Synthesis of Cathepsin-K-Activated Osteoadsorptive Fluorogenic Sentinel (OFS) Probes for Detecting Early Osteoclastic Bone Resorption in a Multiple Myeloma Mouse Model.

We describe the design and synthesis of OFS-1, an Osteoadsorptive Fluorogenic Sentinel imaging probe that is adsorbed by hydroxyapatite (HAp) and bone mineral surfaces, where it generates an external fluorescent signal in response to osteoclast-secreted cathepsin K (Ctsk). The probe consists of a bone-anchoring bisphosphonate moiety connected to a Förster resonance energy transfer (FRET) internally quenched fluorescent (IQF) dye pair, linked by a Ctsk peptide substrate, GHPGGPQG. Key structural features contributing to the effectiveness of OFS-1 were defined by structure-activity relationship (SAR) and modeling studies comparing OFS-1 with two cognates, OFS-2 and OFS-3. In solution or when preadsorbed on HAp, OFS-1 exhibited strong fluorescence when exposed to Ctsk (2.5-20 nM). Time-lapse photomicrographs obtained after seeding human osteoclasts onto HAp-coated well plates containing preadsorbed OFS-1 revealed bright fluorescence at the periphery of resorbing cells. OFS-1 administered systemically detected early osteolysis colocalized with orthotopic engraftment of RPMI-8226-Luc human multiple myeloma cells at a metastatic skeletal site in a humanized mouse model. OFS-1 is thus a promising new imaging tool for detecting abnormal bone resorption.

Production of poly(malic acid) from sugarcane juice in fermentation by Aureobasidium pullulans: Kinetics and process economics.

Poly(ß-l-malic acid) (PMA) is a biodegradable polymer with many potential biomedical applications. PMA can be readily hydrolyzed to malic acid (MA), which is widely used as an acidulant in foods and pharmaceuticals. PMA production from sucrose and sugarcane juice by Aureobasidium pullulans ZX-10 was studied in shake-flasks and bioreactors, confirming that sugarcane juice can be used as an economical substrate without any pretreatment or nutrients supplementation. A high PMA titer of 116.3g/L and yield of 0.41g/g were achieved in fed-batch fermentation. A high productivity of 0.66g/L·h was achieved in repeated-batch fermentation with cell recycle. These results compared favorably with those obtained from glucose and other biomass feedstocks. A process economic analysis showed that PMA could be produced from sugarcane juice at a cost of $1.33/kg, offering a cost-competitive bio-based PMA for industrial applications.

Polymalic acid fermentation by Aureobasidium pullulans for malic acid production from soybean hull and soy molasses: Fermentation kinetics and economic analysis.

Polymalic acid (PMA) production by Aureobasidium pullulans ZX-10 from soybean hull hydrolysate supplemented with corn steep liquor (CSL) gave a malic acid yield of ∼0.4g/g at a productivity of ∼0.5g/L·h. ZX-10 can also ferment soy molasses, converting all carbohydrates including the raffinose family oligosaccharides to PMA, giving a high titer (71.9g/L) and yield (0.69g/g) at a productivity of 0.29g/L·h in fed-batch fermentation under nitrogen limitation. A higher productivity of 0.64g/L·h was obtained in repeated batch fermentation with cell recycle and CSL supplementation. Cost analysis for a 5000 MT plant shows that malic acid can be produced at $1.10/kg from soy molasses, $1.37/kg from corn, and $1.74/kg from soybean hull. At the market price of $1.75/kg, malic acid production from soy molasses via PMA fermentation offers an economically competitive process for industrial production of bio-based malic acid.

Knockdown of CDC2 expression inhibits proliferation, enhances apoptosis, and increases chemosensitivity to temozolomide in glioblastoma cells.

Cell division cycle 2 (CDC2) is always overexpressed in malignant tumor cells and is correlated with chemosensitivity, but it is unclear whether CDC2 overexpression contributes to the chemoresistance potential of glioma cells. The aim of study was to determine the relationship of CDC2 expression with the prognosis and chemoresistance of glioblastoma. In this study, the glioblastoma U87 and U251 cell lines were steadily transfected with a lentivirus vector expressing a short hairpin RNA-targeting CDC2. Expression of CDC2 was evaluated in glioblastoma and cell lines by immunohistochemistry and Western blot analysis. The relationship between CDC2 expression and clinicopathological characteristics was analyzed. Using RNA interference, the effects of CDC2 on chemosensitivity to temozolomide (TMZ) were investigated in U87 and U251 cell lines in vitro. Combined CDC2 knockdown and TMZ treatment inhibited cell proliferation and induced apoptosis in vitro more effectively than either treatment alone. qRT-PCR and Western blot analysis showed that cells underexpressing CDC2 revealed lower expression of the anti-apoptotic protein B cell lymphoma-2 and increased expression of the apoptosis effector caspase-3 compared to U87 and U251 cells transfected with a control vector. Furthermore, expression levels of CDC2 in U87 and U251 cells were related to the IC50 of the antitumor drug TMZ. Knockdown of CDC2 expression was associated with decreased expression of Ral-binding protein 1, a classical chemotherapy drugs transporter. These results indicate that the ability to suppress the malignant phenotype by down-regulating CDC2 expression may provide a new gene therapy approach for overcoming CDC2-associated chemoresistance in patients with malignant glioma.

Tagging SNPs in the MTHFR gene and risk of ischemic stroke in a Chinese population.

Stroke is currently the leading cause of functional impairments worldwide. Folate supplementation is inversely associated with risk of ischemic stroke. Methylenetetrahydrofolate reductase (MTHFR) is an important enzyme involved in folate metabolism. The aim of this study is to examine whether genetic variants in MTHFR gene are associated with the risk of ischemic stroke and fasting total serum homocysteine (tHcy) level. We genotyped nine tag SNPs in the MTHFR gene in a case-control study, including 543 ischemic stroke cases and 655 healthy controls in China. We found that subjects with the rs1801133 TT genotype and rs1801131 CC genotype had significant increased risks of ischemic stroke (adjusted odds ratio (OR)=1.82, 95% confidence interval (CI): 1.27-2.61, p=0.004; adjusted OR=1.99, 95% CI: 1.12-3.56, p=0.01) compared with subjects with the major alleles. Haplotype analysis also found that carriers of the MTHFR CTTCGA haplotype (rs12121543-rs13306553-rs9651118-rs1801133-rs2274976-rs1801131) had a significant reduced risk of ischemic stroke (adjusted OR=0.53, 95% CI: 0.35-0.82) compared with those with the CTTTGA haplotype. Besides, the MTHFR rs1801133 and rs9651118 were significantly associated with serum levels of tHcy in healthy controls (p<0.0001 and p=0.02). These findings suggest that variants in the MTHFR gene may influence the risk of ischemic stroke and serum tHcy.

[Intra- and inter-annual variabilities of particulate organic matter in the Mirs Bay from 2000 to 2010].

Based on the data obtained from monthly cruises from 2000 to 2010, temporal and spatial distributions of the particulate organic matter (POM) in the Mirs Bay were briefly presented and discussed. The POM composition and residence time were approached by combining with the chlorophyll a (Chl-a) measurements. It has been shown that the hydrodynamics in the Mirs Bay only pose a weak impact on the POM distributions. The POM concentration was (1.1 +/- 0.8) mg x L(-1), which was not much different from those in both the Pearl River Estuary and the Daya Bay, but higher than that in the northern South China Sea. A notably positive correlation was found between the POM and Chl-a in the surface-water. The ratio of the phytoplankton POM (PPOM): Chl-a was about 70 g x g(-1), based on which the PPOM concentration was calculated to be (0.31 +/- 0.39) mg x L(-1), accounting for about 28% of the POM. The primary productivity (PP) and integrated POM (IPOM) were used for estimating the POM residence time, which was found to be about 6.5 days in the Mirs Bay, close to that for POC in the coastal continental shelf waters in the southern East China Sea. During the 11-year investigation, the PP inter-annual variability showed a decreasing trend, but both the POM and IPOM underwent a trend of increase, which suggested that the refractory detritus POM had been gradually acumulated in the Mirs Bay.

Production of polymalic acid and malic acid by Aureobasidium pullulans fermentation and acid hydrolysis.

Malic acid is a dicarboxylic acid widely used in the food industry and also a potential C4 platform chemical that can be produced from biomass. However, microbial fermentation for direct malic acid production is limited by low product yield, titer, and productivity due to end-product inhibition. In this work, a novel process for malic acid production from polymalic acid (PMA) fermentation followed by acid hydrolysis was developed. First, a PMA-producing Aureobasidium pullulans strain ZX-10 was screened and isolated. This microbe produced PMA as the major fermentation product at a high-titer equivalent to 87.6 g/L of malic acid and high-productivity of 0.61 g/L h in free-cell fermentation in a stirred-tank bioreactor. Fed-batch fermentations with cells immobilized in a fibrous-bed bioreactor (FBB) achieved the highest product titer of 144.2 g/L and productivity of 0.74 g/L h. The fermentation produced PMA was purified by adsorption with IRA-900 anion-exchange resins, achieving a ∼100% purity and a high recovery rate of 84%. Pure malic acid was then produced from PMA by hydrolysis with 2 M sulfuric acid at 85°C, which followed the first-order reaction kinetics. This process provides an efficient and economical way for PMA and malic acid production, and is promising for industrial application.

Down selection of polymerized bovine hemoglobins for use as oxygen releasing therapeutics in a guinea pig model.

Hemoglobin (Hb)-based oxygen carriers (HBOCs) are being developed as resuscitative fluids for use in multiple medical applications and in lieu of blood transfusion. However, cardiovascular, central nervous system, and renal adverse events have largely impeded progress. This has prompted a need to evaluate novel down selection approaches for HBOCs prior to in-depth preclinical and clinical safety testing. In the present study, polymerized bovine Hbs (PolybHbs) were prepared with increasing ratios of glutaraldehyde to bovine Hb (10:1, 20:1, 30:1, and 40:1). The optimal PolybHb candidate selection was based on a priori determined in vivo response to include a long circulating PolybHb with no measurable renal exposure, minimal cardiovascular response, limited oxidation to metHb in vitro, or in circulation and absence of acute end organ toxicity. Guinea pigs were dosed via a 50% blood for PolybHb exchange transfusion. Data suggested that the 30:1 preparation exhibited maximum circulatory exposure (AUC(0)(-∞)) with the lowest level of oxidation (plasma metHb formation) and minimal (< 10%) blood pressure elevation. Additionally, the 30:1 preparation was absent renal iron deposition as well as abnormal glomerular/tubular histopathology or serum creatinine elevation. Clearance pathways predominantly followed those consistent with endogenous Hb clearance based pathways. Therefore, data confirmed the ability to select a single PolybHb from a small library of HBOCs based on a priori determined characteristics. Moreover, the approach to down selection described could be applied to enhance the early predictability of human safety for this class of biological therapeutics to optimize for specific indications.

Hypervolemic infusion of Lumbricus terrestris erythrocruorin purified by tangential-flow filtration.

BACKGROUND: The hemoglobin of the earthworm Lumbricus terrestris (also known as erythrocruorin, or LtEc) is a naturally occurring high-molecular-weight protein assembly (3.6 MDa) that is extremely stable, resistant to oxidation, and transports oxygen similarly to human whole blood. Therefore, LtEc may serve as an alternative to donated human red blood cells. However, a suitable purification process must be developed to produce highly pure LtEc on a large scale that can be evaluated in an animal model to determine the safety and efficacy of LtEc. STUDY DESIGN AND METHODS: We used tangential-flow filtration (TFF), an easily scalable and affordable technique, to produce highly pure LtEc from earthworms. The purity, yield, methemoglobin level, viscosity, colloid osmotic pressure, O(2) binding equilibria, and ligand-binding kinetics of the purified LtEc were measured in vitro. The purified LtEc product was then evaluated in hamsters using a hypervolemic infusion model to establish its basic biocompatibility and detect any changes in microcirculatory and systemic variables. RESULTS: TFF was able to produce LtEc with high purity and yield (5-10 g/1000 worms). The purified LtEc product did not elicit hypertension or vasoconstriction when infused into hamsters. CONCLUSION: LtEc may be easily purified and safely transfused into hamsters in small amounts (0.5-1.5 g/dL final concentration in blood) without any noticeable side effects. Therefore, LtEc may serve as a very promising oxygen carrier for use in transfusion medicine.

Simulation of NO and O2 transport facilitated by polymerized hemoglobin solutions in an arteriole that takes into account wall shear stress-induced NO production.

A mathematical model was developed to study nitric oxide (NO) and oxygen (O(2)) transport in an arteriole and surrounding tissues exposed to a mixture of red blood cells (RBCs) and hemoglobin (Hb)-based O(2) carriers (HBOCs). A unique feature of this model is the inclusion of blood vessel wall shear stress-induced production of endothelial-derived NO, which is very sensitive to the viscosity of the RBC and HBOC mixture traversing the blood vessel lumen. Therefore in this study, a series of polymerized bovine Hb (PolyHb) solutions with high viscosity, varying O(2) affinities, NO dioxygenation rate constants and O(2) dissociation rate constants that were previously synthesized and characterized by our group was evaluated via mathematical modeling, in order to investigate the effect of these biophysical properties on the transport of NO and O(2) in an arteriole and its surrounding tissues subjected to anemia with the commercial HBOC Oxyglobin® and cell-free bovine Hb (bHb) serving as appropriate controls. The computer simulation results indicated that transfusion of high viscosity PolyHb solutions promoted blood vessel wall shear stress dependent generation of the vasodilator NO, especially in the blood vessel wall and should transport enough NO inside the smooth muscle layer to activate vasodilation compared to the commercial HBOC Oxyglobin® and cell-free bHb. However, NO scavenging in the arteriole lumen was unavoidable due to the intrinsic high NO dioxygenation rate constant of the HBOCs being studied. This study also observed that all PolyHbs could potentially improve tissue oxygenation under hypoxic conditions, while low O(2) affinity PolyHbs were more effective in oxygenating tissues under normoxic conditions compared with high O(2) affinity PolyHbs. In addition, all ultrahigh molecular weight PolyHbs displayed higher O(2) transfer rates than the commercial HBOC Oxyglobin® and cell-free bHb. Therefore, these results suggest that ultrahigh molecular weight PolyHb solutions could be used as safe and efficacious O(2) carriers for use in transfusion medicine. It also suggests that future generations of PolyHb solutions should possess lower NO dioxygenation reaction rate constants in order to reduce NO scavenging, while maintaining high solution viscosity to take advantage of wall shear stress-induced NO production. Taken together, we suggest that this mathematical model can be used to predict the vasoactivity of HBOCs and help guide the design and optimization of the next generation of HBOCs for use in transfusion medicine.

Synthesis, biophysical properties, and oxygenation potential of variable molecular weight glutaraldehyde-polymerized bovine hemoglobins with low and high oxygen affinity.

In a recent study, ultrahigh molecular weight (Mw ) glutaraldehyde-polymerized bovine hemoglobins (PolybHbs) were synthesized with low O2 affinity and exhibited no vasoactivity and a slight degree of hypertension in a 10% top-load model.(1) In this work, we systematically investigated the effect of varying the glutaraldehyde to hemoglobin (G:Hb) molar ratio on the biophysical properties of PolybHb polymerized in either the low or high O2 affinity state. Our results showed that the Mw of the resulting PolybHbs increased with increasing G:Hb molar ratio. For low O2 affinity PolybHbs, increasing the G:Hb molar ratio reduced the O2 affinity and CO association rate constants in comparison to bovine hemoglobin (bHb). In contrast for high O2 affinity PolybHbs, increasing the G:Hb molar ratio led to increased O2 affinity and significantly increased the CO association rate constants compared to unmodified bHb and low O2 affinity PolybHbs. The methemoglobin level and NO dioxygenation rate constants were insensitive to the G:Hb molar ratio. However, all PolybHbs displayed higher viscosities compared to unmodified bHb and whole blood, which also increased with increasing G:Hb molar ratio. In contrast, the colloid osmotic pressure of PolybHbs decreased with increasing G:Hb molar ratio. To preliminarily evaluate the ability of low and high O2 affinity PolybHbs to potentially oxygenate tissues in vivo, an O2 transport model was used to simulate O2 transport in a hepatic hollow fiber (HF) bioreactor. It was observed that low O2 affinity PolybHbs oxygenated the bioreactor better than high O2 affinity PolybHbs. This result points to the suitability of low O2 affinity PolybHbs for use in tissue engineering and transfusion medicine. Taken together, our results show the quantitative effect of varying the oxygen saturation of bHb and G:Hb molar ratio on the biophysical properties of PolybHbs and their ability to oxygenate a hepatic HF bioreactor. We suggest that the information gained from this study can be used to guide the design of the next generation of hemoglobin-based oxygen carriers (HBOCs) for use in tissue engineering and transfusion medicine applications.

Small-volume resuscitation from hemorrhagic shock using high-molecular-weight tense-state polymerized hemoglobins.

BACKGROUND: The objective of this study was to determine the role of plasma oxygen carrying capacity during resuscitation from hemorrhagic shock (HS). METHODS: Hemodynamic responses to small-volume resuscitation from HS with hypertonic saline followed by infusion of ultrahigh-molecular-weight tense-state polymerized hemoglobins (PolyHbs) were studied in the hamster window chamber model. HS was induced by withdrawing 50% of the blood volume (BV), and hypovolemic state was maintained for 1 hour. Resuscitation was implemented by infusion of hypertonic saline (3.5% of BV) followed by 10% of BV infusion of polymerized human Hb (PolyHbhum, P50=49 mm Hg), polymerized bovine Hb (PolyHbbov, P50=40 mm Hg), or human serum albumin (HSA), all at 10 g/dL. Resuscitation was monitored over 90 minutes. RESULTS: PolyHbhum elicited higher arterial pressure, produced vasoconstriction, and decreased perfusion. In contrast, PolyHbbov and HSA exhibited lower blood pressure and partially restored perfusion and functional capillary density compared with PolyHbhum. Blood gas parameters showed a pronounced recovery after resuscitation with PolyHbbov compared with both PolyHbhum and HSA. Tissue PO2 was significantly improved in the PolyHbbov group, showing that the moderate increase in P50 of PolyHbbov compared with hamster blood (P50=32 mm Hg) was beneficial during resuscitation. However, an excessive increase in oxygen release between the central and peripheral circulation, as induced by PolyHbhum produced vasoconstriction and hypoperfusion, limiting the benefits of additional oxygen carrying capacity. CONCLUSIONS: Appropriately engineered PolyHb will enhance/reinstate oxygenation, without hypertension or vasoconstriction, to be used in situations where blood transfusion is not logistically feasible.

Effects of T- and R-state stabilization on deoxyhemoglobin-nitrite reactions and stimulation of nitric oxide signaling.

Recent data suggest that transitions between the relaxed (R) and tense (T) state of hemoglobin control the reduction of nitrite to nitric oxide (NO) by deoxyhemoglobin. This reaction may play a role in physiologic NO homeostasis and be a novel consideration for the development of the next generation of hemoglobin-based blood oxygen carriers (HBOCs, i.e. artificial blood substitutes). Herein we tested the effects of chemical stabilization of bovine hemoglobin in either the T- (THb) or R-state (RHb) on nitrite-reduction kinetics, NO-gas formation and ability to stimulate NO-dependent signaling. These studies were performed over a range of fractional saturations that is expected to mimic biological conditions. The initial rate for nitrite-reduction decreased in the following order RHb>bHb>THb, consistent with the hypothesis that the rate constant for nitrite reduction is faster with R-state Hb and slower with T-state Hb. Moreover, RHb produced more NO-gas and inhibited mitochondrial respiration more potently than both bHb and THb. Interestingly, at low oxygen fractional saturations, THb produced more NO and stimulated nitrite-dependent vasodilation more potently than bHb despite both derivatives having similar initial rates for nitrite reduction and a more negative reduction potential in THb versus bHb. These data suggest that cross-linking of bovine hemoglobin in the T-state conformation leads to a more effective coupling of nitrite reduction to NO-formation. Our results support the model of allosteric regulation of nitrite reduction by deoxyhemoglobin and show that cross-linking hemoglobins in distinct quaternary states can generate products with increased NO yields from nitrite reduction that could be harnessed to promote NO-signaling in vivo.

Synthesis, biophysical properties and pharmacokinetics of ultrahigh molecular weight tense and relaxed state polymerized bovine hemoglobins.

Hemoglobin-based oxygen carriers (HBOC) are currently being developed as red blood cell (RBC) substitutes for use in transfusion medicine. Despite significant commercial development, late stage clinical results of polymerized hemoglobin (PolyHb) solutions hamper development. We synthesized two types of PolyHbs with ultrahigh molecular weights: tense (T) state PolyHb (M(W)=16.59 MDa and P(50)=41 mmHg) and relaxed (R) state PolyHb (M(W)=26.33 MDa and P(50)=0.66 mmHg). By maintaining Hb in either the T- or R-state during the polymerization reaction, we were able to synthesize ultrahigh molecular weight PolyHbs in distinct quaternary states with no tetrameric Hb, high viscosity, low colloid osmotic pressure and the ability to maintain O(2) dissociation, CO association and NO dioxygenation reactions. The PolyHbs elicited some in vitro RBC aggregation that was less than 6% dextran (500 kDa) but more than 5% human serum albumin. In vitro, T-state PolybHb autoxidized faster than R-state PolybHb as expected from previously reported studies, conversely, when administered to guinea pigs as a 20% exchange transfusion, R-state PolybHb oxidized faster and to a greater extent than T-state PolybHb, suggesting a more complex oxidative processes in vivo. Our findings also demonstrate that T-state PolybHb exhibited a longer circulating half-life, slower clearance and longer systemic exposure time compared to R-state PolybHb.

Tissue oxygenation after exchange transfusion with ultrahigh-molecular-weight tense- and relaxed-state polymerized bovine hemoglobins.

Hemoglobin (Hb)-based O(2) carriers (HBOCs) constitute a class of therapeutic agents designed to correct the O(2) deficit under conditions of anemia and traumatic blood loss. The O(2) transport capacity of ultrahigh-molecular-weight bovine Hb polymers (PolybHb), polymerized in the tense (T) state and relaxed (R) state, were investigated in the hamster chamber window model using microvascular measurements to determine O(2) delivery during extreme anemia. The anemic state was induced by hemodilution with a plasma expander (70-kDa dextran). After an initial moderate hemodilution to 18% hematocrit, animals were randomly assigned to exchange transfusion groups based on the type of PolybHb solution used (namely, T-state PolybHb and R-state PolybHb groups). Measurements of systemic parameters, microvascular hemodynamics, capillary perfusion, and intravascular and tissue O(2) levels were performed at 11% hematocrit. Both PolybHbs were infused at 10 g/dl, and their viscosities were higher than nondiluted blood. Restitution of the O(2) carrying capacity with T-state PolybHb exhibited lower arterial pressure and higher functional capillary density compared with R-state PolybHb. Central arterial O(2) tensions increased significantly for R-state PolybHb compared with T-state PolybHb; conversely, microvascular O(2) tensions were higher for T-state PolybHb compared with R-state PolybHb. The increased tissue Po(2) attained with T-state PolybHb results from the larger amount of O(2) released from the PolybHb and maintenance of macrovascular and microvascular hemodynamics compared with R-state PolybHb. These results suggest that the extreme high O(2) affinity of R-state PolybHb prevented O(2) bound to PolybHb from been used by the tissues. The results presented here show that T-state PolybHb, a high-viscosity O(2) carrier, is a quintessential example of an appropriately engineered O(2) carrying solution, which preserves vascular mechanical stimuli (shear stress) lost during anemic conditions and reinstates oxygenation, without the hypertensive or vasoconstriction responses observed in previous generations of HBOCs.

Effects of the molecular mass of tense-state polymerized bovine hemoglobin on blood pressure and vasoconstriction.

Despite recent advances in the design of hemoglobin (Hb)-based oxygen carriers (HBOCs), vasoconstriction, presumably caused by nitric oxide (NO) scavenging, vessel wall hyperoxygenation, and/or extravasation, has been identified as the principal road block hampering commercial development of HBOCs. This study was designed to analyze systemic and microvascular responses to the molecular mass and plasma concentration of tense (T)-state polymerized bovine Hb (PolybHb) solutions. Experiments were performed using the hamster window chamber model subjected to successive hypervolemic infusions of T-state PolybHb solutions. PolybHb plasma concentrations were evaluated, namely, 0.5, 1.0 and 1.5 g/dl, respectively. Infusion of PolybHb solutions with molecular mass >500 kDa elicited hypertension and vasoconstriction proportional to the plasma concentration and inversely proportional to the PolybHb cross-link density. However, two high-molecular mass PolybHb solutions, PolybHb(40:1)(high) PolybHb(50:1)(high), did not elicit vasoconstriction at all concentrations studied, whereas PolybHb(50:1)(high) only elicited moderate hypertension at the highest concentration studied. In contrast, infusion of PolybHb solutions with molecular mass <500 kDa elicited significant hypertension and vasoconstriction compared with PolybHb solutions with molecular mass >500 kDa that was proportional to the plasma concentration and inversely proportional to the PolybHb cross-link density. We present promising results for highly cross-linked T-state PolybHb solutions with molecular mass >500 kDa [PolybHb(40:1)(high) PolybHb(50:1)(high)], which supports the concept that HBOC size/molecular mass influences its proximity to the vascular endothelium and molecular diffusivity. The hemodynamics of HBOC within the plasma layer surrounding the abluminal side endothelium regulates NO production and consumption, vessel oxygen flux, and extravasation. Although mechanistically attractive, neither of these hypotheses can be directly tested in vivo and will require further investigation.