Exploiting the Iron Difluoride Electrochemistry by Constructing Hierarchical Electron Pathways and Cathode Electrolyte Interface.

Conversion-type cathodes such as metal fluorides, especially FeF2 and FeF3 , are potential candidates to replace intercalation cathodes for the next generation of lithium ion batteries. However, the application of iron fluorides is impeded by their poor electronic conductivity, iron/fluorine dissolution, and unstable cathode electrolyte interfaces (CEIs). A facile route to fabricate a mechanical strong electrode with hierarchical electron pathways for FeF2 nanoparticles is reported here. The FeF2 /Li cell demonstrates remarkable cycle performances with a capacity of 300 mAh g-1 after a record long 4500 cycles at 1C. Meanwhile, a record stable high area capacity of over 6 mAh cm-2 is achieved. Furthermore, ultra-high rate capabilities at 20C and 6C for electrodes with low and high mass loading, respectively, are attained. Advanced electron microscopy reveals the formation of stable CEIs. The results demonstrate that the construction of viable electronic connections and favorable CEIs are the key to boost the electrochemical performances of FeF2 cathode.

An All-Solid-State Battery Based on Sulfide and PEO Composite Electrolyte.

Replacing liquid electrolytes with solid polymer electrolytes (SPEs) is considered as a vital approach to developing sulfur (S)-based cathodes. However, the polysulfides shuttle and the growth of lithium (Li) dendrites are still the major challenges in polyethylene oxide (PEO)-based electrolyte. Here, an all-solid-state Li metal battery with flexible PEO-Li10 Si0.3 PS6.7 Cl1.8 (LSPSCl)-C-lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) composite cathode (FCC) and PEO-LSPSCl-LiTFSI composite electrolyte (S-CPE) is designed. The initial capacity of the Li|S-CPE|FCC battery is 414 mAh g-1 with 97.8% capacity retention after 100 cycles at 0.1 A g-1 . Moreover, the battery displays remarkable capacity retention of 80% after 500 cycles at 0.4 A g-1 . Cryo-transmission electron microscopy (Cryo-TEM) reveals rich large-sized Li2 CO3 particles at the Li/PEO interface blocking the Li+ transport, but the layer with rich Li2 O nanocrystals, amorphous LiF and Li2 S at the Li/S-CPE interface suppresses the growth of lithium dendrite and stabilizes the interface. In situ optical microscopy demonstrates that the excellent cyclic stability of FCC is ascribed to the reversible shuttle of P-S-P species, resulting from the movement of ether backbone in PEO. This study provides strategies to mitigate the polysulfide shuttle effect and Li dendrite formation in designing high energy density solid-state Li-S-based batteries.

Enabling Long Cycle Life and High Rate Iron Difluoride Based Lithium Batteries by In Situ Cathode Surface Modification.

Metals fluorides (MFs) are potential conversion cathodes to replace commercial intercalation cathodes. However, the application of MFs is impeded by their poor electronic/ionic conductivity and severe decomposition of electrolyte. Here, a composite cathode of FeF2 and polymer-derived carbon (FeF2 @PDC) with excellent cycling performance is reported. The composite cathode is composed of nanorod-shaped FeF2 embedded in PDC matrix with excellent mechanical strength and electronic/ionic conductivity. The FeF2 @PDC enables a reversible capacity of 500 mAh g-1 with a record long cycle lifetime of 1900 cycles. Remarkably, the FeF2 @PDC can be cycled at a record rate of 60 C with a reversible capacity of 107 mAh g-1 after 500 cycles. Advanced electron microscopy reveals that the in situ formation of stable Fe3 O4 layers on the surface of FeF2 prevents the electrolyte decomposition and leaching of iron (Fe), thus enhancing the cyclability. The results provide a new understanding to FeF2 electrochemistry, and a strategy to radically improve the electrochemical performance of FeF2 cathode for lithium-ion battery applications.

Ultrastable Anode/Electrolyte Interface in Solid-State Lithium-Metal Batteries Using LiCux Nanowire Network Host.

High interfacial resistance and uncontrollable lithium (Li) dendrite are major challenges in solid-state Li-metal batteries (SSLMBs), as they lead to premature short-circuiting and failure of SSLMBs. Here, we report the synthesis of a composite anode comprising a three-dimensional LiCux nanowire network host infiltrated with Li (Li* anode) with low interfacial impedance and superior electrochemical performance. The Li* anode is fabricated by dissolving Cu foil into molten Li followed by solidification. The Li* anode exhibits good wettability with Li6.4La3Zr1.4Ta0.6O12 (LLZTO) and high mechanical strength, rendering low Li*/LLZTO interfacial impedance, homogeneous deposition of Li, and suppression of Li dendrites. Consequently, the Li* anode-based symmetric cells and full cells with LiNi0.88Co0.1Al0.02O2 (NCA), LiFePO4 (LFP), and FeF2 cathodes deliver remarkable electrochemical performance. Specifically, the Li*/LLZTO/Li* symmetrical cell achieves a remarkably long cycle lifetime of 10 000 h with 0.1 mA·cm-2; the Li*/LLZTO/NCA full cell maintains capacity retention of 73.4% after 500 cycles at 0.5C; and all-solid-state Li*/LLZTO/FeF2 full cell achieves a reversible capacity of 147 mAh·g-1 after 500 cycles at 100 mA·g-1. This work demonstrates potential design tactics for an ultrastable Li*/garnet interface to enable high-performance SSLMBs.