Electrochemically-driven actuators: from materials to mechanisms and from performance to applications.

Soft actuators, pivotal for converting external energy into mechanical motion, have become increasingly vital in a wide range of applications, from the subtle engineering of soft robotics to the demanding environments of aerospace exploration. Among these, electrochemically-driven actuators (EC actuators), are particularly distinguished by their operation through ion diffusion or intercalation-induced volume changes. These actuators feature notable advantages, including precise deformation control under electrical stimuli, freedom from Carnot efficiency limitations, and the ability to maintain their actuated state with minimal energy use, akin to the latching state in skeletal muscles. This review extensively examines EC actuators, emphasizing their classification based on diverse material types, driving mechanisms, actuator configurations, and potential applications. It aims to illuminate the complicated driving mechanisms of different categories, uncover their underlying connections, and reveal the interdependencies among materials, mechanisms, and performances. We conduct an in-depth analysis of both conventional and emerging EC actuator materials, casting a forward-looking lens on their trajectories and pinpointing areas ready for innovation and performance enhancement strategies. We also navigate through the challenges and opportunities within the field, including optimizing current materials, exploring new materials, and scaling up production processes. Overall, this review aims to provide a scientifically robust narrative that captures the current state of EC actuators and sets a trajectory for future innovation in this rapidly advancing field.

Hybrid Water-Harvesting Channels Delivering Wide-Range and Supersensitive Passive Fluorescence Humidity Sensors.

The development of optical humidity detection has been of considerable interest in highly integrated wearable electronics and packaged equipment. However, improving their capacities for color recognition at ultralow humidity and response-recovery rate remains a significant challenge. Herein, we propose a type of hybrid water-harvesting channel to construct brand-new passive fluorescence humidity sensors (PFHSs). Specifically, the hybrid water-harvesting channels involve porous metal-organic frameworks and a hydrophilic poly(acrylic acid) network that can capture water vapors from the ambient environment even at ultralow humidity, into which polar-responsive aggregation-induced emission molecules are doped to impart humidity-sensitive luminescence colors. As a result, the PFHSs exhibit clearly defined fluorescence signals within 0-98% RH coupling with desirable performances such as a fast response rate, precise quantitative feedback, and durable reversibility. Given the flexible processability of this system, we further upgrade the porous structure via electrostatic spinning to furnish a kind of Nano-PFHSs, demonstrating an impressive response time (<100 ms). Finally, we validate the promising applications of these sensors in electronic humidity monitoring and successfully fabricate a portable and rapid humidity indicator card.

Synthesis of polymerizable betulin maleic diester derivative for dental restorative resins with antibacterial activity.

OBJECTIVE: Bisphenol A glycidyl methacrylate (Bis-GMA) is of great importance for dental materials as the preferred monomer. However, the presence of bisphenol-A (BPA) core in Bis-GMA structure causes potential concerns since it is associated with endocrine diseases, developmental abnormalities, and cancer lesions. Therefore, it is desirable to develop an alternative replacement for Bis-GMA and explore the intrinsic relationship between monomer structure and resin properties. METHODS: Here, the betulin maleic diester derivative (MABet) was synthesized by a facile esterification reaction using plant-derived betulin and maleic anhydride as raw materials. Its chemical structure was confirmed by 1H and 13C NMR spectra, FT-IR spectra, and HR-MS, respectively. The as-synthesized MABet was then used as polymerizable comonomer to partially or completely substitute Bis-GMA in a 50:50 Bis-GMA: TEGDMA resin (5B5T) to formulate dental restorative resins. These were then determined for the viscosity behavior, light transmittance, real-time degree of conversion, residual monomers, mechanical performance, cytotoxicity, and antibacterial activity against Streptococcus mutans (S. mutans) in detail. RESULTS: Among all experimental resins, increasing the MABet concentration to 50 wt% made the resultant 5MABet5T resin have a maximum in viscosity and appear dark yellowish after polymerization. In contrast, the 1MABet4B5T resin with 10 wt% MABet possessed comparable shear viscosity and polymerization conversion (46.6 ± 1.0% in 60 s), higher flexural and compressive strength (89.7 ± 7.8 MPa; 345.5 ± 14.4 MPa) to those of the 5B5T control (48.5 ± 0.6%; 65.7 ± 6.7 MPa; 223.8 ± 57.1 MPa). This optimal resin also had significantly lower S. mutans colony counts (0.35 ×108 CFU/mL) than 5B5T (7.6 ×108 CFU/mL) without affecting cytocompatibility. SIGNIFICANCE: Introducing plant-derived polymerizable MABet monomer into dental restorative resins is an effective strategy for producing antibacterial dental materials with superior physicochemical property.

Comparative Assessments of Dental Resin Composites: A Focus on Dense Microhybrid Materials.

The performance of dental resin composites is crucially influenced by the sizes and distributions of inorganic fillers. Despite the investigation of a variety of functional particles, glass fillers and nanoscale silica are still the predominant types in dental materials. However, achieving an overall improvement in the performance of resin composites through the optimization of their formulations remains a challenge. This work introduced a "dense" microhybrid filler system with 85 wt % filler loading, leading to the preparation of self-developed resin composites (SRCs). Comparative evaluations of these five SRCs against four commercial products were performed, including mechanical property, polymerization conversion, and shrinkage, along with water sorption and solubility and wear resistance. The results showed that among all SRC groups, SRC3 demonstrated superior mechanical performance, high polymerization conversion, reduced shrinkage, low water absorption and solubility, and acceptable wear resistance. In contrast to commercial products, this optimal SRC3 material was comparable to Z350 XT in flexural and diametral tensile strength and better in flexural modulus and surface hardness. The use of a "dense" microhybrid filler system in the development of resin composites provides a balance between physicochemical property and wear resistance, which may be a promising strategy for the development of composite products.

Earthworm-Inspired Ultra-Durable Sliding Triboelectric Nanogenerator with Bionic Self-Replenishing Lubricating Property for Wind Energy Harvesting and Self-Powered Intelligent Sports Monitoring.

Triboelectric nanogenerators (TENGs), a promising strategy for harvesting distributed low-quality power sources, face inevitable bottlenecks regarding long-term abrasion and poor durability. Herein, both issues are addressed by selecting an earthworm-inspired self-replenishing bionic film (ERB) as the tribo-material of sliding-freestanding TENGs (SF-TENGs), it consists of an interconnected 3D porous network structure capable of storing and releasing lubricant under cyclic mechanical stimuli. Thanks to the superiority of self-replenishing property, there is no need for periodic replenishment and accurate content control of lubricant over the interfacial-lubricating SF-TENGs based on dense tribo-layers. Additionally, an SF-TENG based on ERB film (ERB-TENG) demonstrates remarkable output stability with only a slight attenuation of 1% after continuous operation for 100 000 cycles. Moreover, the ERB-TENG displays a distinguished anti-wear property, exhibiting no distinct abrasion with an ultra-low coefficient of friction (0.077) and maintaining output stability over a prolonged period of 35 days. Furthermore, integration with an energy management circuit enables the ERB-TENG to achieve a 39-fold boost in charging speed. This work proposes a creative approach to enhance the durability and extend the lifespan of TENG devices, which is also successfully applied to wind energy harvesting and intelligent sports monitoring.

Circularly Polarized Room Temperature Phosphorescence through Twisting-induced Helical Structures from Polyvinyl Alcohol-based Fibers Containing Hydrogen-bonded Dyes.

Room temperature phosphorescence (RTP) materials have garnered significant attention owing to its distinctive optical characteristics and broad range of potential applications. However, the challenge remains in producing RTP materials with more simplicity, versatility, and practicality on a large scale, particularly in achieving chiral signals within a single system. Herein, we show that a straightforward and effective combination of wet spinning and twisting technique enables continuously fabricating RTP fibers with twisting-induced helical chirality. By leveraging the hydrogen bonding interactions between polyvinyl alcohol (PVA) and quinoline derivatives, along with the rigid microenvironment provided by PVA chains, typically, Q-NH2@PVA fiber demonstrates outstanding phosphorescent characteristics with RTP lifetime of 1.08 s and phosphorescence quantum yield of 24.6%, and the improved tensile strength being 1.7 times than pure PVA fiber (172 ± 5.82 vs 100 ± 5.65 MPa). Impressively, the transformation from RTP to circularly polarized room temperature phosphorescence (CP-RTP) is readily achieved by imparting left- or right-hand helical structure through simply twisting, enabling large-scale production of chiral Q-NH2@PVA fiber with dissymmetry factor of 10-2. Besides, an array of displays and encryption patterns are crafted by weaving or seaming to exemplify the promising applications of these PVA-based fibers with outstanding adaptivity in cutting-edge anti-counterfeiting technology.

Single center clinical analysis of macrophage activation syndrome complicating juvenile rheumatic diseases.

BACKGROUND: Macrophage activation syndrome (MAS), an example of secondary hemophagocytic lymphohistiocytosis, is a potentially fatal complication of rheumatic diseases. We aimed to study the clinical and laboratory characteristics, treatment schemes, and outcomes of different rheumatic disorders associated with MAS in children. Early warning indicators of MAS have also been investigated to enable clinicians to make a prompt and accurate diagnosis. METHODS: Fifty-five patients with rheumatic diseases complicated by MAS were enrolled between January 2017 and December 2022. Clinical and laboratory data were collected before disease onset, at diagnosis, and after treatment with MAS, and data were compared between patients with systemic juvenile idiopathic arthritis (sJIA), Kawasaki disease (KD), and systemic lupus erythematosus (SLE). A random forest model was established to show the importance score of each variable with a significant difference. RESULTS: Most (81.8%) instances of MAS occurred during the initial diagnosis of the underlying disease. Compared to the active stage of sJIA, the platelet count, erythrocyte sedimentation rate, and fibrinogen level in sJIA-MAS were significantly decreased, whereas ferritin, ferritin/erythrocyte sedimentation rate, aspartate aminotransferase, alanine aminotransferase, lactate dehydrogenase, and D-dimer levels were significantly increased. Ferritin level, ferritin/erythrocyte sedimentation rate, and platelet count had the greatest predictive value for sJIA-MAS. The level of IL-18 in the sJIA-MAS group was significantly higher than in the active sJIA group, whereas IL-6 levels were significantly lower. Most patients with MAS were treated with methylprednisolone pulse combined with cyclosporine, and no deaths occurred. CONCLUSIONS: Thrombocytopenia, ferritin levels, the ferritin/erythrocyte sedimentation rate, and elevated aspartate aminotransferase levels can predict the occurrence of MAS in patients with sJIA. Additionally, our analysis indicates that IL-18 plays an important role in the pathogenesis of MAS in sJIA-MAS.

Scalable Fabrication of Ionic-Conductive Covalent Organic Framework Fibers for Capturing of Sustainable Osmotic Energy.

High-performance covalent organic framework (COF) fibers are demanded for an efficient capturing of blue osmotic power because of their excellent durability, simple integration, and large scalability. However, the scalable production of COF fibers is still very challenging due to the poor solubility and fragile structure of COFs. Herein, for the first time, it is reported that COF dispersions can be continuously processed into macroscopic, meter-long, and pure COF fibers using a wet spinning approach. The two presented COF fibers can be directly used for capturing of osmotic energy, avoiding the production of composite materials that require other additives and face challenges such as phase separation and environmental issues induced by the additives. A COF fiber exhibits power densities of 70.2 and 185.3 W m-2 at 50-fold and 500-fold salt gradients, respectively. These values outperform those of most reported systems, which indicate the high potential of COF fibers for capturing of blue osmotic energy.

Establishing superfine nanofibrils for robust polyelectrolyte artificial spider silk and powerful artificial muscles.

Spider silk exhibits an excellent combination of high strength and toughness, which originates from the hierarchical self-assembled structure of spidroin during fiber spinning. In this work, superfine nanofibrils are established in polyelectrolyte artificial spider silk by optimizing the flexibility of polymer chains, which exhibits combination of breaking strength and toughness ranging from 1.83 GPa and 238 MJ m-3 to 0.53 GPa and 700 MJ m-3, respectively. This is achieved by introducing ions to control the dissociation of polymer chains and evaporation-induced self-assembly under external stress. In addition, the artificial spider silk possesses thermally-driven supercontraction ability. This work provides inspiration for the design of high-performance fiber materials.

Crosslinking and fluorination reinforced PTFE nanofibrous membrane with excellent amphiphobic performance for low-scaling membrane distillations.

Membrane distillation (MD) has emerged as a promising technology for desalination and concentration of hypersaline brine. However, the efficient preparation of a structurally stable and salinity-resistant membrane remains a significant challenge. In this study, an amphiphobic polytetrafluoroethylene nanofibrous membrane (PTFE NFM) with exceptional resistance to scaling has been developed, using an energy-efficient method. This innovative approach avoids the high-temperature sintering treatment, only involving electrospinning with PTFE/PVA emulsion and subsequent low-temperature crosslinking and fluorination. The impact of the PVA and PTFE contents, as well as the crosslinking and subsequent fluorination on the morphology and MD performance of the NFM, were systematically investigated. The optimized PTFE NFM displayed robust amphiphobicity, boasting a water contact angle of 155.2º and an oil contact angle of 132.7º. Moreover, the PTFE NFM exhibited stable steam flux of 52.1 L·m-2·h-1 and 26.7 L·m-2·h-1 when fed with 3.5 wt % and 25.0 wt % NaCl solutions, respectively, and an excellent salt rejection performance (99.99 %, ΔT = 60 °C) in a continuous operation for 24 h, showing exceptional anti-scaling performance. It also exhibited stable anti-wetting and anti-fouling properties against surfactants (sodium dodecyl sulfate) and hydrophobic contaminants (diesel oil). These results underscore the significant potential of the PTFE nanofibrous membrane for practical applications in desalination, especially in hypersaline or polluted aqueous environments.

Electrospun organic/inorganic hybrid nanofibers for accelerating wound healing: a review.

Electrospun nanofiber membranes hold great promise as scaffolds for tissue reconstruction, mirroring the natural extracellular matrix (ECM) in their structure. However, their limited bioactive functions have hindered their effectiveness in fostering wound healing. Inorganic nanoparticles possess commendable biocompatibility, which can expedite wound healing; nevertheless, deploying them in the particle form presents challenges associated with removal or collection. To capitalize on the strengths of both components, electrospun organic/inorganic hybrid nanofibers (HNFs) have emerged as a groundbreaking solution for accelerating wound healing and maintaining stability throughout the healing process. In this review, we provide an overview of recent advancements in the utilization of HNFs for wound treatment. The review begins by elucidating various fabrication methods for hybrid nanofibers, encompassing direct electrospinning, coaxial electrospinning, and electrospinning with subsequent loading. These techniques facilitate the construction of micro-nano structures and the controlled release of inorganic ions. Subsequently, we delve into the manifold applications of HNFs in promoting the wound regeneration process. These applications encompass hemostasis, antibacterial properties, anti-inflammatory effects, stimulation of cell proliferation, and facilitation of angiogenesis. Finally, we offer insights into the prospective trends in the utilization of hybrid nanofiber-based wound dressings, charting the path forward in this dynamic field of research.

A Skin-Inspired Self-Adaptive System for Temperature Control During Dynamic Wound Healing.

The thermoregulating function of skin that is capable of maintaining body temperature within a thermostatic state is critical. However, patients suffering from skin damage are struggling with the surrounding scene and situational awareness. Here, we report an interactive self-regulation electronic system by mimicking the human thermos-reception system. The skin-inspired self-adaptive system is composed of two highly sensitive thermistors (thermal-response composite materials), and a low-power temperature control unit (Laser-induced graphene array). The biomimetic skin can realize self-adjusting in the range of 35-42 °C, which is around physiological temperature. This thermoregulation system also contributed to skin barrier formation and wound healing. Across wound models, the treatment group healed ~ 10% more rapidly compared with the control group, and showed reduced inflammation, thus enhancing skin tissue regeneration. The skin-inspired self-adaptive system holds substantial promise for next-generation robotic and medical devices.

Enhancing Targeted Photodynamic Therapy: Star-Shaped Glycopolymeric Photosensitizers for Improved Selectivity and Efficacy.

Targeted photodynamic therapy (PDT) offers advantages over nontargeted approaches, including improved selectivity, efficacy, and reduced side effects. This study developed star-shaped glycopolymeric photosensitizers using porphyrin-based initiators via ATRP. Incorporating a porphyrin core gave the polymers fluorescence and ROS generation, while adding fructose improved solubility and targeting capabilities. The photosensitizers had high light absorption, singlet oxygen production, specificity, low dark toxicity, and biocompatibility. The glycopolymers with longer sugar arms and higher density showed better uptake on MCF-7 and MDA-MB-468 cells compared to HeLa cells, indicating enhanced targeting capabilities. Inhibition of endocytosis confirmed the importance of the GLUT5 receptor. The resulting polymers exhibited good cytocompatibility under dark conditions and satisfactory PDT under light irradiation. Interestingly, the polymers containing fructose have a GLUT5-dependent elimination effect on the MCF-7 and MDA-MB-468 cells. The intracellular ROS production followed a similar pattern, indicating that the fructose polymer exhibits specific targeting toward cells with GLUT5 receptors.

Unleashing the Power of PET-RAFT Polymerization: Journey from Porphyrin-Based Photocatalysts to Combinatorial Technologies and Advanced Bioapplications.

The emergence of photoinduced energy/electron transfer-reversible addition-fragmentation chain transfer polymerization (PET-RAFT) not only revolutionized the field of photopolymerization but also accelerated the development of porphyrin-based photocatalysts and their analogues. The continual expansion of the monomer family compatible with PET-RAFT polymerization enhances the range of light radiation that can be harnessed, providing increased flexibility in polymerization processes. Furthermore, the versatility of PET-RAFT polymerization extends beyond its inherent capabilities, enabling its integration with various technologies in diverse fields. This integration holds considerable promise for the advancement of biomaterials with satisfactory bioapplications. As researchers delve deeper into the possibilities afforded by PET-RAFT polymerization, the collaborative efforts of individuals from diverse disciplines will prove invaluable in unleashing its full potential. This Review presents a concise introduction to the fundamental principles of PET-RAFT, outlines the progress in photocatalyst development, highlights its primary applications, and offers insights for future advancements in this technique, paving the way for exciting innovations and applications.

3D stem cell spheroids with urchin-like hydroxyapatite microparticles enhance osteogenesis of stem cells.

Cell therapy (also known as cell transplantation) has been considered promising as a next-generation living-cell therapy strategy to surpass the effects of traditional drugs. However, their practical clinical uses and product conversion are hampered by the unsatisfied viability and efficacy of the transplanted cells. Herein, we propose a synergistic enhancement strategy to address these issues by constructing 3D stem cell spheroids integrated with urchin-like hydroxyapatite microparticles (uHA). Specifically, cell-sized uHA microparticles were synthesized via a simple hydrothermal method using glutamic acid (Glu, E) as the co-template with good biocompatibility and structural antimicrobial performance (denoted as E-uHA). Combining with a hanging drop method, stem cell spheroids integrated with E-uHA were successfully obtained by culturing bone marrow mesenchymal stem cells (BMSCs) with a low concentration of the E-uHA suspensions (10 µg mL-1). The resulting composite spheroids of BMSCs/E-uHA deliver a high cellular viability, migration activity, and a superior osteogenic property compared to the 2D cultured counterpart or other BMSC spheroids. This work provides an effective strategy for integrating a secondary bio-functional component into stem cell spheroids for designing more cell therapy options with boosted cellular viability and therapeutic effect.

Insights into Materials, Physics, and Applications in Flexible and Wearable Acoustic Sensing Technology.

Sound plays a crucial role in the perception of the world. It allows to communicate, learn, and detect potential dangers, diagnose diseases, and much more. However, traditional acoustic sensors are limited in their form factors, being rigid and cumbersome, which restricts their potential applications. Recently, acoustic sensors have made significant advancements, transitioning from rudimentary forms to wearable devices and smart everyday clothing that can conform to soft, curved, and deformable surfaces or surroundings. In this review, the latest scientific and technological breakthroughs with insightful analysis in materials, physics, design principles, fabrication strategies, functions, and applications of flexible and wearable acoustic sensing technology are comprehensively explored. The new generation of acoustic sensors that can recognize voice, interact with machines, control robots, enable marine positioning and localization, monitor structural health, diagnose human vital signs in deep tissues, and perform organ imaging is highlighted. These innovations offer unique solutions to significant challenges in fields such as healthcare, biomedicine, wearables, robotics, and metaverse. Finally, the existing challenges and future opportunities in the field are addressed, providing strategies to advance acoustic sensing technologies for intriguing real-world applications and inspire new research directions.

Advances in Stimuli-Responsive Chitosan Hydrogels for Drug Delivery Systems.

Sustainable and controllable drug transport is one of the most efficient ways of disease treatment. Due to high biocompatibility, good biodegradability, and low costs, chitosan and its derivatives are widely used in biomedical fields. Specifically, chitosan hydrogel enables drugs to pass through biological barriers because of their abundant amino and hydroxyl groups that can interact with human tissues. Moreover, the multi-responsive nature (pH, temperature, ions strength, and magnetic field, etc.) of chitosan hydrogels makes precise drug release a possibility. Here, the synthesis methods, modification strategies, stimuli-responsive mechanisms of chitosan-based hydrogels, and their recent progress in drug delivery are summarized. Chitosan hydrogels that carry and release drugs through subcutaneous (dealing with wound dressing), oral (dealing with gastrointestinal tract), and facial (dealing with ophthalmic, ear, and brain) are reviewed. Finally, challenges toward clinic application and the future prospects of stimuli-responsive chitosan-based hydrogels are indicated.

Synthesis and Fabrication of Betulin-Derived Polysulfide and Polysulfoxide Electrospun Fibers for Fruit Preservation.

Plant-derived biocompounds play a crucial role in the field of renewable materials due to their sustainability as they can be converted into monomers for polymerization, comparable to numerous monomers obtained from petroleum. In this work, betulin, a triterpene derivative with antibacterial properties obtained from birch tree bark, was esterified to produce two varieties of α,ω-diene derivatives with different lengths of methylene spacers. These derivatives were then copolymerized with 2,2'-(ethylenedioxy)diethanethiol using thiol-ene photopolymerization. We optimized and confirmed the polymerization parameters such as solvents, catalysts, and monomer concentrations. These analyses allowed for the obtainment of polysulfides with a high molar mass of up to 38.9 kg/mol under the optimized conditions. Furthermore, the polysulfides were converted into polysulfoxides by using a dilute hydrogen peroxide solution. Thermal analysis of the obtained polymers revealed excellent thermal stability (up to 300 °C) and tunable glass transition temperatures depending on their molar mass and composition. We successfully produced fibers with a diameter of approximately 3.9 µm by using the electrospinning technique. The morphology and hydrophobicity of the fibers were analyzed by using scanning electron microscopy and water contact angle analysis. Plant-derived polymeric fibers exhibited good cellular biocompatibility and broad-spectrum antibacterial activity, making them promising candidates for applications in fruit preservation.

Highly conductive and porous lignin-derived carbon fibers.

Bio-based carbon fibers derived from lignin have gained significant attention due to their diverse and renewable sources, ease of extraction, and low cost. However, the current limitations of low specific surface area and insufficient electrical conductivity hinder the widespread application of lignin-derived carbon fibers (LCFs). In this work, highly conductive and porous LCFs are developed through melt-blowing, pretreatment, and carbonization processes. The effects of the carbonization temperature and heating rate on the structures and properties of the LCFs are systematically investigated. The resultant LCFs exhibit high electrical conductivity (71 400 S m-1) and a large specific surface area (923 m2 g-1). The assembled lithium-ion battery based on the LCF anodes demonstrates a long cycle life of >800 cycles and a high specific capacity of 466 mA h g-1. The findings of this study hold practical significance for promoting the utilization of lignin in the fields of energy storage, adsorption, and beyond.

Excitation localization/delocalization induced intramolecular singlet fission in cyclopentadithiophene-based quinoidal derivatives.

Two triplet excitons are generated through an ultrafast photophysical process, namely singlet fission (SF), providing a solution for efficient solar energy usage. In this work, we provide an effective guideline for designing SF materials by adjusting the planarity in cyclopentadithiophene (CPDT) derivatives. A practical strategy is proposed for tuning the quinoidal-biradical resonance structures by varying the electron push-pull groups of CPDTs for SF. The localized, delocalized, and intermediate charge-transfer excited configurations are predicted in the singlet excited state via computational simulations, which is further confirmed by ultrafast spectroscopy. Deduced from the potential energy surfaces in the low-lying excited states and transient absorption, the delocalized excited state is formed in 2.1 ps via postulated intramolecular SF in a polar solvent, followed by the ultrafast formation of the free triplet state with a lifetime of 6.8 ps. In comparison with different cross-conjugated chromophores, it is found that the increase in the charge separation could enhance the triplet-pair generation for iSF. We expect that by introducing symmetry-breaking modifications in the electronic configurations and adjusting the separation between the push-pull groups of CPDTs, it should be possible to prolong the duration of the free triplet state by preventing recombination within the triplet-pair excited configuration.