In Situ Construction of a Multifunctional Interphase Enabling Continuous Capture of Unstable Lattice Oxygen Under Ultrahigh Voltages.

The use of nickel-rich layered materials as cathodes can boost the energy density of lithium batteries. However, developing a safe and long-term stable nickel-rich layered cathode is challenging primarily due to the release of lattice oxygen from the cathode during cycling, especially at high voltages, which will cause a series of adverse effects, leading to battery failure and thermal runaway. Surface coating is often considered effective in capturing active oxygen species; however, its process is rather complicated, and it is difficult to maintain intact on the cathode with large volume changes during cycling. Here, we propose an in situ construction of a multifunctional cathode/electrolyte interphase (CEI), which is easy to prepare, repairable, and, most importantly, capable of continuously capturing active oxygen species during the entire life span. This unique protective mechanism notably improves the cycling stability of Li||LiNi0.8Co0.1Mn0.1O2 (NCM811) cells at rigorous working conditions, including ultrahigh voltage (4.8 V), high temperature (60 °C), and fast charging (10 C). An industrial 1 A h graphite||NCM811 pouch cell achieved stable operation of 600 cycles with a capacity retention of 79.6% at 4.4 V, exhibiting great potential for practical use. This work provides insightful guidance for constructing a multifunctional CEI to bypass limitations associated with high-voltage operations of nickel-rich layered cathodes.

Sustainable upcycling of mixed spent cathodes to a high-voltage polyanionic cathode material.

Sustainable battery recycling is essential for achieving resource conservation and alleviating environmental issues. Many open/closed-loop strategies for critical metal recycling or direct recovery aim at a single component, and the reuse of mixed cathode materials is a significant challenge. To address this barrier, here we propose an upcycling strategy for spent LiFePO4 and Mn-rich cathodes by structural design and transition metal replacement, for which uses a green deep eutectic solvent to regenerate a high-voltage polyanionic cathode material. This process ensures the complete recycling of all the elements in mixed cathodes and the deep eutectic solvent can be reused. The regenerated LiFe0.5Mn0.5PO4 has an increased mean voltage (3.68 V versus Li/Li+) and energy density (559 Wh kg-1) compared with a commercial LiFePO4 (3.38 V and 524 Wh kg-1). The proposed upcycling strategy can expand at a gram-grade scale and was also applicable for LiFe0.5Mn0.5PO4 recovery, thus achieving a closed-loop recycling between the mixed spent cathodes and the next generation cathode materials. Techno-economic analysis shows that this strategy has potentially high environmental and economic benefits, while providing a sustainable approach for the value-added utilization of waste battery materials.

Fast Li Replenishment Channels-Assisted Recycling of Degraded Layered Cathodes with Enhanced Cycling Performance and Thermal Stability.

The direct recycling of cathode materials in lithium-ion batteries is important for environmental protection and resource conservation. The key regeneration processes are composition replenishment and atom rearrangement, both of which depend on the migration and diffusion of atoms. However, for the direct recycling of degraded LiNi0.5Co0.2Mn0.3O2 (D-NCM523) cathode, the irreversible phase transitions that accumulate during the long-term cycles block the Li diffusion channels with a high diffusion energy barrier, making it difficult to fully repair the layered structure and resulting in rapid capacity decay. To address the challenge, fast Li replenishment channels are rebuilt to regulate the surface phase and effectively assist the regeneration process with a reduced energy barrier. This method reduces the amount of Li supplement by >75% and shortens the sintering time (only 2 h) to fully regenerate D-NCM523, compared to general direct recycling methods. The regenerated NCM523 (LCMB-NCM523) exhibits a satisfactory repaired specific capacity of 160 mAh g-1 and excellent cycling stability, retaining 78% of its capacity after 300 cycles. In addition, LCMB-NCM523 is recycled with improved thermal decomposition peak temperature and enables 200 cycles even at 60 °C, greatly improving safety. This work proposes a promising way for the large-scale direct regeneration of layered cathodes.

Toward Direct Regeneration of Spent Lithium-Ion Batteries: A Next-Generation Recycling Method.

The popularity of portable electronic devices and electric vehicles has led to the drastically increasing consumption of lithium-ion batteries recently, raising concerns about the disposal and recycling of spent lithium-ion batteries. However, the recycling rate of lithium-ion batteries worldwide at present is extremely low. Many factors limit the promotion of the battery recycling rate: outdated recycling technology is the most critical one. Existing metallurgy-based recycling methods rely on continuous decomposition and extraction steps with high-temperature roasting/acid leaching processes and many chemical reagents. These methods are tedious with worse economic feasibility, and the recycling products are mostly alloys or salts, which can only be used as precursors. To simplify the process and improve the economic benefits, novel recycling methods are in urgent demand, and direct recycling/regeneration is therefore proposed as a next-generation method. Herein, a comprehensive review of the origin, current status, and prospect of direct recycling methods is provided. We have systematically analyzed current recycling methods and summarized their limitations, pointing out the necessity of developing direct recycling methods. A detailed analysis for discussions of the advantages, limitations, and obstacles is conducted. Guidance for future direct recycling methods toward large-scale industrialization as well as green and efficient recycling systems is also provided.

A Multifunctional Amino Acid Enables Direct Recycling of Spent LiFePO4 Cathode Material.

Lithium iron phosphate (LiFePO4 , LFP) batteries are extensively used in electric vehicles and energy storage due to their good cycling stability and safety. However, the finite service life of lithium-ion batteries leads to significant amounts of retired LFP batteries, urgently required to be recycled by environmentally friendly and effective methods. Here, a direct regeneration strategy using natural and low-cost L-threonine as a multifunctional reductant is proposed. The hydroxyl groups and amino groups in L-threonine act as electron donors and nitrogen sources, respectively. The reductive environment created by L-threonine not only aids in converting the degraded FePO4 phase back to a single LFP phase but also facilitates the elimination of detrimental Li-Fe anti-site defects; thus, reconstructing fast Li+ diffusion channels. Meanwhile, N atoms derived from amino groups are able to dope into carbon layers, generating more active sites and enhancing the conductive properties of LFP particles. The regenerated LFP shows great electrochemical performance with a discharge capacity of 147.9 mAh g-1 at 1 C and a capacity retention of 86% after 500 cycles at 5 C. Further, this approach is also feasible for LFP black mass sourced from practical industrial dismantling lines, providing considerable prospects for the large-scale recycling of LFP batteries.

Topotactic Transformation of Surface Structure Enabling Direct Regeneration of Spent Lithium-Ion Battery Cathodes.

Recycling spent lithium-ion batteries (LIBs) has become an urgent task to address the issues of resource shortage and potential environmental pollution. However, direct recycling of the spent LiNi0.5Co0.2Mn0.3O2 (NCM523) cathode is challenging because the strong electrostatic repulsion from a transition metal octahedron in the lithium layer provided by the rock salt/spinel phase that is formed on the surface of the cycled cathode severely disrupts Li+ transport, which restrains lithium replenishment during regeneration, resulting in the regenerated cathode with inferior capacity and cycling performance. Here, we propose the topotactic transformation of the stable rock salt/spinel phase into Ni0.5Co0.2Mn0.3(OH)2 and then back to the NCM523 cathode. As a result, a topotactic relithiation reaction with low migration barriers occurs with facile Li+ transport in a channel (from one octahedral site to another, passing through a tetrahedral intermediate) with weakened electrostatic repulsion, which greatly improves lithium replenishment during regeneration. In addition, the proposed method can be extended to repair spent NCM523 black mass, spent LiNi0.6Co0.2Mn0.2O2, and spent LiCoO2 cathodes, whose electrochemical performance after regeneration is comparable to that of the commercial pristine cathodes. This work demonstrates a fast topotactic relithiation process during regeneration by modifying Li+ transport channels, providing a unique perspective on the regeneration of spent LIB cathodes.

Ultrahigh-Voltage LiCoO2 at 4.7 V by Interface Stabilization and Band Structure Modification.

Lithium cobalt oxide (LCO) is widely used in Li-ion batteries due to its high volumetric energy density, which is generally charged to 4.3 V. Lifting the cut-off voltage of LCO from 4.3 V to 4.7 V will increase the specific capacity from 150 to 230 mAh g-1 with a significant improvement of 53%. However, LCO suffers serious problems of H1-3/O1 phase transformation, unstable interface between cathode and electrolyte, and irreversible oxygen redox reaction at 4.7 V. Herein, interface stabilization and band structure modification are proposed to strengthen the crystal structure of LCO for stable cycling of LCO at an ultrahigh voltage of 4.7 V. Gradient distribution of magnesium and uniform doping of nickel in Li layers inhibit the harmful phase transitions of LCO, while uniform LiMgx Ni1- x PO4 coating stabilizes the LCO-electrolyte interface during cycles. Moreover, the modified band structure improves the oxygen redox reaction reversibility and electrochemical performance of the modified LCO. As a result, the modified LCO has a high capacity retention of 78% after 200 cycles at 4.7 V in the half cell and 63% after 500 cycles at 4.6 V in the full cell. This work makes the capacity of LCO one step closer to its theoretical specific capacity.

Direct regeneration of degraded lithium-ion battery cathodes with a multifunctional organic lithium salt.

The recycling of spent lithium-ion batteries is an effective approach to alleviating environmental concerns and promoting resource conservation. LiFePO4 batteries have been widely used in electric vehicles and energy storage stations. Currently, lithium loss, resulting in formation of Fe(III) phase, is mainly responsible for the capacity fade of LiFePO4 cathode. Another factor is poor electrical conductivity that limits its rate capability. Here, we report the use of a multifunctional organic lithium salt (3,4-dihydroxybenzonitrile dilithium) to restore spent LiFePO4 cathode by direct regeneration. The degraded LiFePO4 particles are well coupled with the functional groups of the organic lithium salt, so that lithium fills vacancies and cyano groups create a reductive atmosphere to inhibit Fe(III) phase. At the same time, pyrolysis of the salt produces an amorphous conductive carbon layer that coats the LiFePO4 particles, which improves Li-ion and electron transfer kinetics. The restored LiFePO4 cathode shows good cycling stability and rate performance (a high capacity retention of 88% after 400 cycles at 5 C). This lithium salt can also be used to recover degraded transition metal oxide-based cathodes. A techno-economic analysis suggests that this strategy has higher environmental and economic benefits, compared with the traditional recycling methods.

Stable Operation of Lithium Metal Batteries with Aggressive Cathode Chemistries at 4.9†V.

High-voltage lithium metal batteries (LMBs) pose severe challenges for the matching of electrolytes with aggressive electrodes, especially at low temperatures. Here, we report a rational modification of the Li+ solvation structure to extend the voltage and temperature operating ranges of conventional electrolytes. Ion-ion and ion-dipole interactions as well as the electrochemical window of solvents were tailored to improve oxidation stability and de-solvation kinetics of the electrolyte. Meanwhile, robust and elastic B and F-rich interphases are formed on both electrodes. Such optimization enables Li||LiNi0.5 Mn1.5 O4 cells (90.2 % retention after 400 cycles) and Li||LiNi0.6 Co0.2 Mn0.2 O2 (NCM622) cells (74.0 % retention after 200 cycles) to cycle stably at an ultra-high voltage of 4.9 V. Moreover, NCM622 cells deliver a considerable capacity of 143.5 mAh g-1 at -20 °C, showing great potential for practical uses. The proposed strategy sheds light on further optimization for high-voltage LMBs.

Long-Life Regenerated LiFePO4 from Spent Cathode by Elevating the d-Band Center of Fe.

A large amount of spent LiFePO4 (LFP) has been produced in recent years because it is one of the most widely used cathode materials for electric vehicles. The traditional hydrometallurgical and pyrometallurgical recycling methods are doubted because of the economic and environmental benefits; the direct regeneration method is considered a promising way to recycle spent LFP. However, the performance of regenerated LFP by direct recycling is not ideal due to the migration of Fe ions during cycling and irreversible phase transition caused by sluggish Li+ diffusion. The key to addressing the challenge is to immobilize Fe atoms in the lattice and improve the Li+ migration capability during cycling. In this work, spent LFP is regenerated by using environmentally friendly ethanol, and its cycling stability is promoted by elevating the d-band center of Fe atoms via construction of a heterogeneous interface between LFP and nitrogen-doped carbon. The FeO bonding is strengthened and the migration of Fe ions during cycling is suppressed due to the elevated d-band center. The Li+ diffusion kinetics in the regenerated LFP are improved, leading to an excellent reversibility of the phase transition. Therefore,  the regenerated LFP exhibits an ultrastable cycling performance at a high rate of 10 C with ≈80% capacity retention after 1000 cycles.

Adaptable Eutectic Salt for the Direct Recycling of Highly Degraded Layer Cathodes.

Recycling spent lithium-ion batteries (LIBs) is promising for resource reuse and environmental conservation but suffers from complex processing and loss of embedded value of spent LIBs in conventional metallurgy-based recycling routes. Herein, we selected a eutectic LiI-LiOH salt with the lowest eutectic point among binary eutectic lithium salt systems to provide a Li-rich molten environment, not only offering excess lithium but benefiting ion diffusion compared with that in the solid environment. Hence, the highly degraded LiNi0.5Co0.2Mn0.3O2 in spent LIBs which suffers high Li-deficiency and serious structural defects with harmful phase transitions is directly regenerated. A facile one-step heating strategy in the presence of a combination of the eutectic lithium salt and Co2O3 and MnO2 additives not only simplifies the recycling process but also endows the cathode materials with lithium supplementation and structural ordering, which contributes to a restoration of the capacity and stable cycling performance. In particular, this eutectic salt with a low eutectic point helps decrease the temperature and time of the direct recycling process and shows good adaptability for other layer oxide cathode materials (LiCoO2 and LiNi0.6Co0.2Mn0.2O2) in spent LIBs with varying cathode chemistry. As such, the feasibility of the direct recycling route is improved and broadened with simple and efficient processing, providing an idea for energy-saving cathode regeneration in future LIB recycling.

Suppressed Lattice Oxygen Release via Ni/Mn Doping from Spent LiNi0.5Mn0.3Co0.2O2 toward High-Energy Layered-Oxide Cathodes.

LiCoO2 has suffered from poor stability under high voltage as a result of insufficient Co-O bonding that causes lattice oxygen release and lattice distortions. Herein, we fabricated a high-voltage LiCoO2 at 4.6 V by doping with Ni/Mn atoms, which are obtained from spent LiNi0.5Mn0.3Co0.2O2 cathode materials. The as-prepared high-voltage LiCoO2 with Ni/Mn substitutional dopants in the Co layer enhances Co-O bonding that suppresses oxygen release and harmful phase transformation during delithiation, thus stabilizing the layered structure and leading to a superior electrochemical performance at 4.6 V. The pouch cell of modified LiCoO2 exhibits a capacity retention of 85.1% over 100 cycles at 4.5 V (vs graphite). We found that our strategy is applicable for degraded LiCoO2, and the regenerated LiCoO2 using this strategy exhibits excellent capacity retention (84.1%, 100 cycles) at 4.6 V. Our strategy paves the way for the direct conversion of spent batteries into high-energy-density batteries.