Scaling of stochastic growth and division dynamics: A comparative study of individual rod-shaped cells in the Mother Machine and SChemostat platforms.

Microfluidic platforms enable long-term quantification of stochastic behaviors of individual bacterial cells under precisely controlled growth conditions. Yet, quantitative comparisons of physiological parameters and cell behaviors of different microorganisms in different experimental and device modalities is not available due to experiment-specific details affecting cell physiology. To rigorously assess the effects of mechanical confinement, we designed, engineered, and performed side-by-side experiments under otherwise identical conditions in the Mother Machine (with confinement) and the SChemostat (without confinement), using the latter as the ideal comparator. We established a protocol to cultivate a suitably engineered rod-shaped mutant of Caulobacter crescentus in the Mother Machine and benchmarked the differences in stochastic growth and division dynamics with respect to the SChemostat. While the single-cell growth rate distributions are remarkably similar, the mechanically confined cells in the Mother Machine experience a substantial increase in interdivision times. However, we find that the division ratio distribution precisely compensates for this increase, which in turn reflects identical emergent simplicities governing stochastic intergenerational homeostasis of cell sizes across device and experimental configurations, provided the cell sizes are appropriately mean-rescaled in each condition. Our results provide insights into the nature of the robustness of the bacterial growth and division machinery.

Influence of motion correction on the visual analysis of cardiac magnetic resonance stress perfusion imaging.

OBJECTIVE: Image post-processing corrects for cardiac and respiratory motion (MoCo) during cardiovascular magnetic resonance (CMR) stress perfusion. The study analyzed its influence on visual image evaluation. MATERIALS AND METHODS: Sixty-two patients with (suspected) coronary artery disease underwent a standard CMR stress perfusion exam during free-breathing. Image post-processing was performed without (non-MoCo) and with MoCo (image intensity normalization; motion extraction with iterative non-rigid registration; motion warping with the combined displacement field). Images were evaluated regarding the perfusion pattern (perfusion deficit, dark rim artifact, uncertain signal loss, and normal perfusion), the general image quality (non-diagnostic, imperfect, good, and excellent), and the reader's subjective confidence to assess the images (not confident, confident, very confident). RESULTS: Fifty-three (non-MoCo) and 52 (MoCo) myocardial segments were rated as 'perfusion deficit', 113 vs. 109 as 'dark rim artifacts', 9 vs. 7 as 'uncertain signal loss', and 817 vs. 824 as 'normal'. Agreement between non-MoCo and MoCo was high with no diagnostic difference per-patient. The image quality of MoCo was rated more often as 'good' or 'excellent' (92 vs. 63%), and the diagnostic confidence more often as "very confident" (71 vs. 45%) compared to non-MoCo. CONCLUSIONS: The comparison of perfusion images acquired during free-breathing and post-processed with and without motion correction demonstrated that both methods led to a consistent evaluation of the perfusion pattern, while the image quality and the reader's subjective confidence to assess the images were rated more favorably for MoCo.

Axial plane single-molecule super-resolution microscopy of whole cells.

Fluorescence nanoscopy has become an indispensable tool for studying organelle structures, protein dynamics, and interactions in biological sciences. Single-molecule localization microscopy can now routinely achieve 10-50 nm resolution through fluorescently labeled specimens in lateral optical sections. However, visualizing structures organized along the axial direction demands scanning and imaging each of the lateral imaging planes with fine intervals throughout the whole cell. This iterative process suffers from photobleaching of tagged probes, is susceptible to alignment artifacts and also limits the imaging speed. Here, we focused on the axial plane super-resolution imaging which integrated the single-objective light-sheet illumination and axial plane optical imaging with single-molecule localization technique to resolve nanoscale cellular architectures along the axial (or depth) dimension without scanning. We demonstrated that this method is compatible with DNA points accumulation for imaging in nanoscale topography (DNA-PAINT) and exchange-PAINT by virtue of its light-sheet illumination, allowing multiplexed super-resolution imaging throughout the depth of whole cells. We further demonstrated this proposed system by resolving the axial distributions of intracellular organelles such as microtubules, mitochondria, and nuclear pore complexes in both COS-7 cells and glioblastoma patient-derived tumor cells.

CphA2 is a novel type of cyanophycin synthetase in N2-fixing cyanobacteria.

Most cyanobacteria use a single type of cyanophycin synthetase, CphA1, to synthesize the nitrogen-rich polymer cyanophycin. The genomes of many N2-fixing cyanobacteria contain an additional gene that encodes a second type of cyanophycin synthetase, CphA2. The potential function of this enzyme has been debated due to its reduced size and the lack of one of the two ATP-binding sites that are present in CphA1. Here, we analysed CphA2 from Anabaena variabilis ATCC 29413 and Cyanothece sp. PCC 7425. We found that CphA2 polymerized the dipeptide ß-aspartyl-arginine to form cyanophycin. Thus, CphA2 represents a novel type of cyanophycin synthetase. A cphA2 disruption mutant of A. variabilis was generated. Growth of this mutant was impaired under high-light conditions and nitrogen deprivation, suggesting that CphA2 plays an important role in nitrogen metabolism under N2-fixing conditions. Electron micrographs revealed that the mutant had fewer cyanophycin granules, but no alteration in the distribution of granules in its cells was observed. Localization of CphA2 by immunogold electron microscopy demonstrated that the enzyme is attached to cyanophycin granules. Expression of CphA1 and CphA2 was examined in Anabaena WT and cphA mutant cells. Whilst the CphA1 level increased upon nitrogen deprivation, the CphA2 level remained nearly constant.

Plastid targeting strategies for cyanophycin synthetase to achieve high-level polymer accumulation in Nicotiana tabacum.

The production of biodegradable polymers in transgenic plants is an important challenge in plant biotechnology; nevertheless, it is often accompanied by reduced plant fitness. In order to decrease the phenotypic abnormalities caused by cytosolic production of the biodegradable polymer cyanophycin, and to increase polymer accumulation, four translocation pathway signal sequences for import into chloroplasts were individually fused to the coding region of the cyanophycin synthetase gene (cphA(Te)) of Thermosynechococcus elongatus BP-1, resulting in the constructs pRieske-cphA(Te), pCP24-cphA(Te), pFNR-cphA(Te) and pPsbY-cphA(Te). These constructs were expressed in Nicotiana tabacum var. Petit Havana SRI under the control of the constitutive cauliflower mosaic virus (CaMV) 35S promoter. Three of the four constructs led to polymer production. However, only the construct pPsbY-cphA(Te) led to cyanophycin accumulation exclusively in chloroplasts. In plants transformed with the pCP24-cphA(Te) and pFNR-cphA(Te) constructs, water-soluble and water-insoluble forms of cyanophycin were only located in the cytoplasm, which resulted in phenotypic changes similar to those observed in plants transformed with constructs lacking a targeting sequence. The plants transformed with pPsbY-cphA(Te) produced predominantly the water-insoluble form of cyanophycin. The polymer accumulated to up to 1.7% of dry matter in primary (T(0)) transformants. Specific T(2) plants produced 6.8% of dry weight as cyanophycin, which is more than five-fold higher than the previously published value. Although all lines tested were fertile, the progeny of the highest cyanophycin-producing line showed reduced seed production compared with control plants.

PII-regulated arginine synthesis controls accumulation of cyanophycin in Synechocystis sp. strain PCC 6803.

Cyanophycin (multi-L-arginyl-poly-L-aspartic acid) is a nitrogen storage polymer found in most cyanobacteria and some heterotrophic bacteria. The cyanobacterium Synechocystis sp. strain PCC 6803 accumulates cyanophycin following a transition from nitrogen-limited to nitrogen-excess conditions. Here we show that the accumulation of cyanophycin depends on the activation of the key enzyme of arginine biosynthesis, N-acetyl-L-glutamate kinase, by signal transduction protein PII.

Production of cyanophycin, a suitable source for the biodegradable polymer polyaspartate, in transgenic plants.

The production of biodegradable polymers in transgenic plants in order to replace petrochemical compounds is an important challenge for plant biotechnology. Polyaspartate, a biodegradable substitute for polycarboxylates, is the backbone of the cyanobacterial storage material cyanophycin. Cyanophycin, a copolymer of l-aspartic acid and l-arginine, is produced via non-ribosomal polypeptide biosynthesis by the enzyme cyanophycin synthetase. A gene from Thermosynechococcus elongatus BP-1 encoding cyanophycin synthetase has been expressed constitutively in tobacco and potato. The presence of the transgene-encoded messenger RNA (mRNA) correlated with changes in leaf morphology and decelerated growth. Such transgenic plants were found to produce up to 1.1% dry weight of a polymer with cyanophycin-like properties. Aggregated material, able to bind a specific cyanophycin antibody, was detected in the cytoplasm and the nucleus of the transgenic plants.

Cyanophycin synthetase-like enzymes of non-cyanobacterial eubacteria: characterization of the polymer produced by a recombinant synthetase of Desulfitobacterium hafniense.

Some bacterial genomes were found to contain genes encoding putative proteins with considerable sequence homology to cyanophycin synthetase CphA of cyanobacteria. Such a gene from the Gram-positive, spore-forming anaerobe Desulfitobacterium hafniense was cloned. Expression in Escherichia coli resulted in the formation of a polydispers copolymer of aspartic acid and arginine, with a minor amount of lysine, of about 30 kDa molecular mass. In contrast to cyanophycin, this polymer was water-soluble. The structure of the polymer formed by the synthetase from Desulfitobacterium hafniense was studied by enzymatic degradation with the cyanophycin-specific hydrolase cyanophycinase, and by chemical and mass-spectroscopic analyses. Despite of the differences in solubility, indicating that both polymers cannot be completely identical, the chemical structure was found to be very similar to that of cyanophycin. The results suggest that the use of cyanophycin-like polymers as a nitrogen-rich reserve material is not restricted to cyanobacteria, and that such polymers may not necessarily be stored in granules.