RESUMO
An external volume Bragg grating (VBG) is used for transverse and longitudinal mode stabilization of a broad area diode laser (BAL) with an on-chip transverse Bragg resonance (TBR) grating. The internal TBR grating defines a transverse low-loss mode at a specific propagation angle inside the BAL. Selection of the TBR mode was realized via the angular geometry of an external resonator assembly consisting of the TBR BAL and a feedback element. A feedback mirror provides near diffraction limited and spectral narrow output in the TBR mode albeit requiring an intricate alignment procedure. If feedback is provided via a VBG, adjustment proves to be far less critical and higher output powers were achieved. Moreover, additional modulation in the far field distribution became discernible allowing for a better study of the TBR concept.
RESUMO
The emission characteristics of a novel, specially designed broad area diode laser (BAL) with on-chip transversal Bragg resonance (TBR) grating in lateral direction were investigated in an off-axis external cavity setup. The internal TBR grating defines a low loss transversal mode at a specific angle of incidence and a certain wavelength. By providing feedback at this specific angle with an external mirror, it is possible to select this low loss transverse mode and stabilize the BAL. Near diffraction limited emission with an almost single lobed far field pattern could be realized, in contrast to the double lobed far field pattern of similar setups using standard BALs or phase-locked diode laser arrays. Furthermore, we could achieve a narrow bandwidth emission with a simplified setup without external frequency selective elements.