Silicon's Influence on Polyphenol and Flavonoid Profiles in Pea (Pisum sativum L.) under Cadmium Exposure in Hydroponics: A Study of Metabolomics, Extraction Efficacy, and Antimicrobial Properties of Extracts.

The current study aimed to investigate the impact of silicon (Si) supplementation in the form of Na2SiO3 on the metabolome of peas under normal conditions and following exposure to cadmium (Cd) stress. Si is known for its ability to enhance stress tolerance in various plant species, including the mitigation of heavy metal toxicity. Cd, a significant contaminant, poses risks to both human health and the environment. The study focused on analyzing the levels of bioactive compounds in different plant parts, including the shoot, root, and pod, to understand the influence of Si supplementation on their biosynthesis. Metabolomic analysis of pea samples was conducted using a targeted HPLC/MS approach, enabling the identification of 15 metabolites comprising 9 flavonoids and 6 phenolic acids. Among the detected compounds, flavonoids, such as flavon and quercetin, along with phenolic acids, including chlorogenic acid and salicylic acid, were found in significant quantities. The study compared Si supplementation at concentrations of 1 and 2 mM, as well as Cd stress conditions, to evaluate their effects on the metabolomic profile. Additionally, the study explored the extraction efficiency of three different methods: accelerated solvent extraction (ASE), supercritical fluid extraction (SFE), and maceration (MAC). The results revealed that SFE was the most efficient method for extracting polyphenolic compounds from the pea samples. Moreover, the study investigated the stability of polyphenolic compounds under different pH conditions, ranging from 4.0 to 6.0, providing insights into the influence of the pH on the extraction and stability of bioactive compounds.

The usefulness of the MALDI-TOF MS technique in the determination of dairy samples' microbial composition: comparison of the new EXS 2600 system with MALDI Biotyper platform.

This study compared the EXS 2600 system with the MALDI Biotyper for identifying microorganisms in dairy samples. Of the 196 bacterial isolates from milk, whey, buttermilk, cream, and dairy wastewater, the species and genus consistent identification between two systems showed 74% and 99%, respectively. However, the level of species identification rate exhibited a difference, which was higher in Zybio than in Bruker-76.0% and 66.8%, respectively. Notably, the EXS 2600 system performed better with certain yeast species and H. alvei, while the Biotyper excelled with Pseudomonas bacteria. Unique microbial compositions were found in 85% of dairy samples, with whey and buttermilk having the highest diversity. This research highlights the EXS 2600's potential as a reliable dairy microbial identification tool and underscores the need for a more diverse and comprehensive spectral database, despite the database's focus on clinical applications (as announced).

Study of sample preparation influence on bacterial lipids profile in matrix-assisted laser desorption/ionization time-of-flight mass spectrometry.

Lipids are one of the cell components therefore it is important to be able to accurately assess them. One of the analytical techniques used to study lipid profiles is matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI TOF MS). The present study attempted to select optimal conditions for sample preparation and MALDI MS analysis of bacterial lipidome in both positive and negative ion modes using different extraction protocols-Folch, Matyash, and Bligh & Dyer, solvents used to apply samples, and matrices such as 9-aminoacridine (9-AA), α-cyano-4-hydroxycinnamic acid (CHCA), 2,5-dihydroxybenzoic acid (DHB), 2-mercaptobenzothiazole (MBT), and 2,4,6-trihydroxyacetophenone (THAP). The obtained results allowed concluding that DHB or CHCA matrices are suitable for lipid analysis in the positive mode, and in the negative mode THAP or 9-AA. The most appropriate protocol for extracting lipids from bacterial cells was the Bligh & Dyer method in both ionization modes. The use of the solvent TA30, which was a mixture of acetonitrile and 0.1% trifluoroacetic acid in water, provided on the spectra a significant number of signals from lipids in all groups analyzed, such as fatty acyls, glycerolipids, and glycerophospholipids.

Implications of Sample Preparation Methods on the MALDI-TOF MS Identification of Spore-Forming Bacillus Species from Food Samples: A Closer Look at Bacillus licheniformis, Peribacillus simplex, Lysinibacillus fusiformis, Bacillus flexus, and Bacillus marisflavi.

This research underscores the criticality of tailored culture conditions and incubation periods for effective and accurate identification of spore-forming bacteria: Bacillus licheniformis, Peribacillus simplex, Lysinibacillus fusiformis, Bacillus flexus, and Bacillus marisflav, isolated from food samples, utilizing the MALDI-TOF MS technique. All isolated strains were confirmed as Gram-positive bacteria from diverse genera through 16S rDNA gene sequencing. To enhance the accuracy of the identification process, the study employed an optimization strategy involving a varied incubation time (ranging from 1 to 48 h) and two distinct sample preparation approaches-direct transfer facilitated by formic acid and protein extraction via ethanol. It was observed that matrix-assisted laser desorption ionization-time-of-flight mass spectrometry (MALDI-TOF MS) could successfully identify approximately 47% of the samples following a 24 h incubation period. The study emphasizes the critical role of sample preparation methods in enabling precise bacterial identification. Our findings reveal the necessity of tailoring the incubation time for each sample, as the optimum period for accurate identification fluctuated between 1 and 12 h. Further demonstrating the interplay between incubation time and spore quantity, our study used the Schaeffer-Fulton staining method to show that the lowest spore counts were detected between 5 and 8 h of incubation. This provides evidence that spore formation impacts bacterial identification. Our research thus deepens the understanding of spore-forming bacteria identification using MALDI-TOF MS and illuminates the various factors affecting the dependability and accuracy of this technique. Future research may explore additional variables, such as the effect of varying culture media, to further augment identification accuracy and gain a holistic understanding of spore-forming bacterial behavior in food samples. By enhancing our knowledge, these findings can substantially contribute to improving food safety and quality assurance strategies by enabling the more accurate and efficient identification of spore-forming bacteria in the food industry, thereby elevating the standards of food safety.

Lipidomics Characterization of the Microbiome in People with Diabetic Foot Infection Using MALDI-TOF MS.

Lipidomic profiling has emerged as a powerful tool for the comprehensive characterization of bacterial species, particularly in the context of clinical diagnostics. Utilizing matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS), this study aims to elucidate the lipidomic landscapes of bacterial strains isolated from diabetic foot infections (DFI). Our analysis successfully identified a diverse array of lipids in the cellular membranes of both Gram-positive and Gram-negative bacteria, revealing a total of 108 unique fatty acid combinations. Specifically, we identified 26 LPG, 33 LPE, 43 PE, 114 PG, 89 TAG, and 120 CLP in Gram-positive bacteria and 10 LPG, 14 LPE, 124 PE, 37 PG, 13 TAG, and 22 CLP in Gram-negative strains. Key fatty acids, such as palmitic acid, palmitoleic acid, stearic acid, and oleic acid, were prominently featured. Univariate analysis further highlighted distinct lipidomic signatures among the bacterial strains, revealing elevated levels of phosphatidylethanolamine (PE) and phosphatidylglycerol (PG) in Gram-negative bacteria associated with DFI. In contrast, Gram-positive strains demonstrated increased or uniquely fluctuating levels of triglyceride (TAG) and cardiolipin (CLP). These findings not only underscore the utility of MALDI-TOF MS in bacterial lipidomics but also provide valuable insights into the lipidomic adaptations of bacteria in diabetic foot infections, thereby laying the groundwork for future studies aimed at constructing microbial lipid libraries for enhanced bacterial identification.

Multi-Instrumental Analysis Toward Exploring the Diabetic Foot Infection Microbiota.

The polymicrobial nature of diabetic foot infection (DFI) makes accurate identification of the DFI microbiota, including rapid detection of drug resistance, challenging. Therefore, the main objective of this study was to apply matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI TOF MS) technique accompanied by multiply culture conditions to determine the microbial patterns of DFIs, as well as to assess the occurrence of drug resistance among Gram-negative bacterial isolates considered a significant cause of the multidrug resistance spread. Furthermore, the results were compared with those obtained using molecular techniques (16S rDNA sequencing, multiplex PCR targeting drug resistance genes) and conventional antibiotic resistance detection methods (Etest strips). The applied MALDI-based method revealed that, by far, most of the infections were polymicrobial (97%) and involved many Gram-positive and -negative bacterial species-19 genera and 16 families in total, mostly Enterobacteriaceae (24.3%), Staphylococcaceae (20.7%), and Enterococcaceae (19.8%). MALDI drug-resistance assay was characterized by higher rate of extended-spectrum beta-lactamases (ESBLs) and carbapenemases producers compared to the reference methods (respectively 31% and 10% compared to 21% and 2%) and revealed that both the incidence of drug resistance and the species composition of DFI were dependent on the antibiotic therapy used. MALDI approach included antibiotic resistance assay and multiply culture conditions provides microbial identification at the level of DNA sequencing, allow isolation of both common (eg. Enterococcus faecalis) and rare (such as Myroides odoratimimus) bacterial species, and is effective in detecting antibiotic-resistance, especially those of particular interest-ESBLs and carbapenemases.

Silver Nanoparticle Targets Fabricated Using Chemical Vapor Deposition Method for Differentiation of Bacteria Based on Lipidomic Profiles in Laser Desorption/Ionization Mass Spectrometry.

The global threat of numerous infectious diseases creates a great need to develop new diagnostic methods to facilitate the appropriate prescription of antimicrobial therapy. More recently, the possibility of using bacterial lipidome analysis via laser desorption/ionization mass spectrometry (LDI-MS) as useful diagnostic tool for microbial identification and rapid drug susceptibility has received particular attention because lipids are present in large quantities and can be easily extracted similar to ribosomal proteins. Therefore, the main goal of the study was to evaluate the efficacy of two different LDI techniques-matrix-assisted (MALDI) and surface-assisted (SALDI) approaches-in the classification of the closely related Escherichia coli strains under cefotaxime addition. Bacterial lipids profiles obtained by using the MALDI technique with different matrices as well as silver nanoparticle (AgNP) targets fabricated using the chemical vapor deposition method (CVD) of different AgNP sizes were analyzed by the means of different multivariate statistical methods such as principal component analysis (PCA), partial least squares discriminant analysis (PLS-DA), sparse partial least squares discriminant analysis (sPLS-DA), and orthogonal projections to latent structures discriminant analysis (OPLS-DA). The analysis showed that the MALDI classification of strains was hampered by interference from matrix-derived ions. In contrast, the lipid profiles generated by the SALDI technique had lower background noise and more signals associated with the sample, allowing E. coli to be successfully classified into cefotaxime-resistant and cefotaxime-sensitive strains, regardless of the size of the AgNPs. AgNP substrates obtained using the CVD method were used for the first time for distinguishing closely related bacterial strains based on their lipidomic profiles and demonstrate high potential as a future diagnostic tool for the detection of antibiotic susceptibility.

Characterization of the salivary microbiome before and after antibiotic therapy via separation technique.

In the present research, the MALDI-TOF MS technique was applied as a tool to rapidly identify the salivary microbiome. In this fact, it has been monitored the changes occurred in molecular profiles under different antibiotic therapy. Significant changes in the composition of the salivary microbiota were noticed not only in relation to the non antibiotic (non-AT) and antibiotic treatment (AT) groups, but also to the used media, the antibiotic therapy and co-existed microbiota. Each antibiotic generates specific changes in molecular profiles. The highest number of bacterial species was isolated in the universal culture medium (72%) followed by the selective medium (48% and 38%). In the case of non-AT patients, the prevalence of Streptococcus salivarius (25%), Streptococcus vestibularis (19%), Streptococcus oralis (13%), and Staphylococcus aureus (6%) was identified while in the case of AT, Streptococcus salivarius (11%), Streptococcus parasanguinis (11%), Staphylococcus epidermidis (12%), Enterococcus faecalis (9%), Staphylococcus hominis (8%), and Candida albicans (6%) were identified. Notable to specified that the Candida albicans was noticed only in AT samples, indicating a negative impact on the antibiotic therapy. The accuracy of the MALDI-TOF MS technique was performed by the 16S rRNA gene sequencing analysis-as a reference method. Conclusively, such an approach highlighted in the present study can help in developing the methods enabling a faster diagnosis of disease changes at the cellular level before clinical changes occur. Once the MALDI tool allows for the distinguishing of the microbiota of non-AT and AT, it may enable to monitor the diseases treatment and develop a treatment regimen for individual patients in relation to each antibiotic. KEY POINTS: The salivary microbiota of antibiotic-treated patients was more bacteria variety MALDI-TOF MS is a promising tool for recording of reproducible molecular profiles Our data can allow to monitor the treatment of bacterial diseases for patients.

A New Approach to Imaging and Rapid Microbiome Identification for Prostate Cancer Patients Undergoing Radiotherapy.

(1) Background: Little is known about the impact of urinary microflora, in particular, its effects on side effects after radiotherapy. The use of mass spectrometry identification method (MALDI) may bring a new look at the issue of the composition and significance of the urinary microbiome. This study aimed to use the mass spectrometry identification method (MALDI) to identify the microbiome of urine samples collected from 50 irradiated prostate cancer patients. (2) Methods: Blood and urine samples were collected before gold marker implantation, at the start and last day of radiotherapy, 1, 4 months after. Patients do not always collect the urine from the midstream; therefore, samples were collected from the first void and midstream in 12 patients for MALDI analysis; in the remaining 38 patients-from the midstream void for MALDI and biochemical analysis. (3) Results: Microorganisms were present in 140/181 urine samples. We found 33 different species 3G(-) and 30G(+). The most frequently isolated strains were: Staphylococcus haemolyticus, Staphylococcus epidermidis, Staphylococcus hominis, Enterococcus faecalis, and Micrococcus luteus. When comparing the type of urine samples, bacteria were more common in samples from the first-void urine than from the midstream one. The absence of bacteria was found in 12.2% of samples from the first-void urine and in 24.7% from the midstream. There was no difference in the total incidence of species between streams (p = 0.85). Before fiducial implantation, the total number of detected bacterial species was significantly higher in comparison to the end of radiotherapy (p = 0.038), indicating that the administered therapy resulted in depleting the local microbiome. One month after radiotherapy, an increase in the number of isolated bacteria was observed. The number of bacterial species in urine did not correlate with blood parameters. The presence of leukocytes (p = 0.013) and proteins (p = 0.004) in urine was related to a greater variety of bacteria found in urine specimens. (4) Conclusions: We obtained a similar spectrum of bacteria from the initial and middle urine streams. We also showed that there is a change in bacteria species affected by the treatment of prostate cancer patients, with both antibiotics before gold fiducial implantation and radiotherapy.

Isolation and Identification of Lactococcus lactis and Weissella cibaria Strains from Fermented Beetroot and an Investigation of Their Properties as Potential Starter Cultures and Probiotics.

The presence of certain microorganisms in dairy products or silage is highly desirable. Among them are probiotic strains of lactic acid bacteria (LAB), which show many beneficial features, including antimicrobial properties that support the development of beneficial microflora; in addition, owing to their biochemical activity, they influence the nutritional, dietary, and organoleptic properties of food products. Before being placed on the market, each strain requires separate testing to determine its probiotic properties and effectiveness. The aim of this study was to isolate LAB strains from a pickled beetroot sample that could be used in the dairy industry and with the potential to be considered as a probiotic in the future. Two strains identified using the MALDI technique were selected-Lactococcus lactis and Weissella cibaria. The optimal growth conditions of the strains were determined, and their proteolytic properties were assessed with the use of the o-PA reagent and spectrophotometry. The lipid profile was analyzed using the SALDI (surface-assisted laser desorption/ionization) technique and silver nanoparticles. High-performance liquid chromatography was used to assess the ability of the strains to synthesize beneficial metabolites, such as B vitamins (B2, B3, and B9) or lactic acid, and gas chromatography was used to analyze the substances responsible for organoleptic properties. Moreover, the ability to inhibit the growth of pathogenic strains was also tested in the selected strains. Both tested strains demonstrated the desired properties of starter cultures for future use in functional food production, showing that fermented plant products can serve as valuable potential probiotic sources.

Lacticaseibacillus paracasei as a Modulator of Fatty Acid Compositions and Vitamin D3 in Cream.

Butter is an important source of essential fatty acids, lipid-soluble vitamins, and antioxidants in the diet. However, this study showed that the presence of the Lacticaseibacillus paracasei strain has a great influence on the fatty acid profile as well as provitamin D3 and vitamin D3 content in the cream-the raw material from which the butter is obtained. The addition of this lactic acid bacteria enriches the cream in 9-hexadecenoic acid, oleic acid, octadeca-9,12-dienoic acid, and conjugated linoleic acid, which exhibit antimutagenic and anticarcinogenic properties. Moreover, a higher level of monounsaturated fatty acids can extend the shelf life of butter in the future. In the present work, we observed that the presence of lactic acid bacteria contributed to an increase in the level of provitamin D after 6 h of incubation and an increase in the levels of vitamin D3 after 24 and 48 h. Fatty acid profiles and the content of vitamins were largely dependent on the presence of light and mixing, which are probably associated with the status of lipid peroxidation.

New sources of lactic acid bacteria with potential antibacterial properties.

In the face of the growing demand for functional food, the search for new sources of lactic acid bacteria (LAB) becomes a priority. In our research, we used multiplied culture conditions followed by identification via the matrix-assisted laser desorption ionization-time of flight mass spectrometry for seeking LAB strains in plant- and animal-derived sources. Furthermore, the selected LAB isolates were examined for their proteolytic activity as well as antimicrobial action against different bacterial pathogens. The applied method appeared to be useful tool for searching LAB strains within different types of the biological matrices. The best source of the LABs was from calf. Comparing properties of the two selected LABs, those isolated from calf demonstrated the greatest proteolytic and antibacterial properties suggesting that gastrointestinal microbiota are the most valuable LAB source. Nevertheless, second selected strain derived from pickled cucumber juice may be also treated as a promising source of potential probiotic strains.

Identification, Structure and Characterization of Bacillus tequilensis Biofilm with the Use of Electrophoresis and Complementary Approaches.

Biofilm is a complex structure formed as a result of the accumulation of bacterial cell clusters on a surface, surrounded by extracellular polysaccharide substances (EPSs). Biofilm-related bacterial infections are a significant challenge for clinical treatment. Therefore, the main goal of our study was to design a complementary approach in biofilm characterization before and after the antibiotic treatment. The 16S rRNA gene sequencing allowed for the identification of Bacillus tequilensis, as a microbial model of the biofilm formation. Capillary electrophoresis demonstrates the capability to characterize and show the differences of the electrophoretic mobility between biofilms untreated and treated with antibiotics: amoxicillin, gentamicin and metronidazole. Electrophoretic results show the clumping phenomenon (amoxicillin and gentamicin) as a result of a significant change on the surface electric charge of the cells. The stability of the dispersion study, the molecular profile analysis, the viability of bacterial cells and the scanning morphology imaging were also investigated. The microscopic and spectrometry study pointed out the degradation/remodeling of the EPSs matrix, the inhibition of the cell wall synthesis and blocking the ribosomal protein synthesis by amoxicillin and gentamicin. However, untreated and treated bacterial cells show a high stability for the biofilm formation system. Moreover, on the basis of the type of the antibiotic treatment, the mechanism of used antibiotics in cell clumping and degradation were proposed.

A new approach to identifying pathogens, with particular regard to viruses, based on capillary electrophoresis and other analytical techniques.

Fast determination, identification and characterization of pathogens is a significant challenge in many fields, from industry to medicine. Standard approaches (e.g., culture media and biochemical tests) are known to be very time-consuming and labor-intensive. Conversely, screening techniques demand a quick and low-cost grouping of microbial isolates, and current analysis call for broad reports of pathogens, involving the application of molecular, microscopy, and electromigration techniques, DNA fingerprinting and also MALDI-TOF methods. The present COVID-19 pandemic is a crisis that affects rich and poor countries alike. Detection of SARS-CoV-2 in patient samples is a critical tool for monitoring disease spread, guiding therapeutic decisions and devising social distancing protocols. The goal of this review is to present an innovative methodology based on preparative separation of pathogens by electromigration techniques in combination with simultaneous analysis of the proteome, lipidome, and genome using laser desorption/ionization analysis.

Culturomics Approach to Identify Diabetic Foot Infection Bacteria.

The main goal of the study was to evaluate the usefulness of the culturomics approach in the reflection of diabetic foot infections (DFIs) microbial compositions in Poland. Superficial swab samples of 16 diabetic foot infection patients (Provincial Polyclinical Hospital in Torun, Poland) were subjected to culturing using 10 different types of media followed by the identification via the matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) and Biotyper platform. Identified 204 bacterial isolates representing 18 different species-mostly Enterococcus faecalis (63%) and Staphylococcus aureus (44%). Most of the infections (81%) demonstrated a polymicrobial character. Great differences in the species coverage, the number of isolated Gram-positive and Gram-negative bacteria, and the efficiency of the microbial composition reflection between the investigated media were revealed. The use of commonly recommended blood agar allowed to reveal only 53% of the entire microbial composition of the diabetic foot infection samples, which considerably improved when the chromagar orientation and vancomycin-resistant enterococi agar were applied. In general, efficiency increased in the following order: selective < universal < enriched < differential media. Performed analysis also revealed the impact of the culture media composition on the molecular profiles of some bacterial species, such as Corynebacterium striatum, Proteus mirabilis or Morganella morganii that contributed to the differences in the identification quality. Our results indicated that the culturomics approach can significantly improve the accuracy of the reflection of the diabetic foot infections microbial compositions as long as an appropriate media set is selected. The chromagar orientation and vancomycin-resistant enterococi agar media which were used for the first time to study diabetic foot infection microbial profiles demonstrate the highest utility in the culturomics approach and should be included in further studies directed to find a faster and more reliable diabetic foot infection diagnostic tool.

Identification of Bacteria Associated with Post-Operative Wounds of Patients with the Use of Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry Approach.

The bacterial infection of post-operative wounds is a common health problem. Therefore, it is important to investigate fast and accurate methods of identifying bacteria in clinical samples. The aim of the study was to analyse the use of the MALDI-TOF MS technique to identify microorganism wounds that are difficult to heal. The most common bacteria are Escherichia coli, Staphylococcus spp., and Enterococcus spp. We also demonstrate the effect of culture conditions, such as the used growth medium (solid: Brain Heart Infusion Agar, Mueller Hilton Agar, Glucose Bromocresol Purple Agar, and Vancomycin Resistance Enterococci Agar Base and liquid: Tryptic Soy Broth and BACTEC Lytic/10 Anaerobic/F), the incubation time (4, 6, and 24h), and the method of the preparation of bacterial protein extracts (the standard method based on the Bruker guideline, the Sepsityper method) to identify factors and the quality of the obtained mass spectra. By comparing the protein profiles of bacteria from patients not treated with antibiotics to those treated with antibiotics based on the presence/absence of specific signals and using the UniProt platform, it was possible to predict the probable mechanism of the action of the antibiotic used and the mechanism of drug resistance.

Study on carbapenemase-producing bacteria by matrix-assisted laser desorption/ionization approach.

The development of new techniques for the detection of carbapenemase activity is of great importance since the increased incident of resistance against carbapenems represents a serious threat to global public health. In this context, the matrix-assisted laser desorption/ionization approach already demonstrated to be a reliable tool for rapid carbapenemase detection. As a newly developed test, there is still a lack of in-depth analysis of its robustness and possible wider application. The main goal of this study was to evaluate the potential for using the design MBT STAR-Carba assay as the pre-characterization method for Enterobacterales and P. aeruginosa strains in terms of the produced classes of carbapenemases using modified procedure parameters-various suspension densities and incubation times. Moreover, its usefulness for the in-depth analysis and characterization of metallo-ß-lactamases (MBL) was tested by applying inhibition assays. In this study, the designed assay proved to be a sensitive tool for the detection of carbapenemase hydrolytic activity, which can be successfully used to partially classify the class of carbapenemase present. Additionally, the use of defined high concentration suspensions would allow to shorten the incubation time to 1 minute for certain strains. Considering that the assay was also suitable to investigate the effect of different inhibitors on the MBL activity, it demonstrates far higher discriminatory potential than only a rapid routine carbapenemase detection tool and could be used as a susceptibility assay.

Study on Molecular Profiles of Staphylococcus aureus Strains: Spectrometric Approach.

Staphylococcus aureus remains a major health problem responsible for many epidemic outbreaks. Therefore, the development of efficient and rapid methods for studying molecular profiles of S. aureus strains for its further typing is in high demand. Among many techniques, matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI TOF MS) represents a timely, cost-effective, and reliable strain typing approach, which is still rarely used due to insufficient knowledge about the impact of sample preparation and analysis conditions on the molecular profiles and strain classification efficiency of S. aureus. The aim of this study was to evaluate the effect of the culture conditions and matrix type on the differentiation of molecular profiles of various S. aureus strains via the MALDI TOF MS analysis and different computational methods. The analysis revealed that by changing the culture conditions, matrix type, as well as a statistical method, the differentiation of S. aureus strains can be significantly improved. Therefore, to accelerate the incorporation of the MALDI-based strain typing in routine laboratories, further studies on the standardization and searching of optimal conditions on a larger number of isolates and bacterial species are of great need.

Lipidomic analysis of lactic acid bacteria strains by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry.

Analysis by MALDI-TOF mass spectrometry and gas chromatography-mass spectrometry was used to characterize the lipid profile of 3 lactic acid bacteria strains. By gas chromatography coupled with mass spectrometry, 23 fatty acids were identified. Dominant acids were palmitic (C16:0), oleic (C18:1), and α-linoleic acid (C18:3n-3) for Lactobacillus paracasei; for Lactococcus lactis they were palmitic (C16:0), gondoic (C20:1), myristoleic (C14:1), and eicosadienoic acid (C20:2), respectively; and in the case of Lactobacillus curvatus were C18:1, C18:2n-6, and C16:0, respectively. The effect of the medium on fatty acid composition was also determined. In addition, the fatty acid profile was also compared using MALDI MS analysis. The MALDI-TOF MS was used for qualitative analysis and identification of bacterial lipids. Phosphatidylglycerol, phosphatidylethanolamine, phosphatidylinositol, phosphatidylcholine, triacylglycerols, and ceramides were the most abundant species in lactic acid bacteria. One hundred different combinations of fatty acids in polar and nonpolar lipids have been identified, including 11 phospholipids (18 phosphatidylglycerol, 16 phosphatidylethanolamine, 10 phosphatidylinositol, 8 phosphatidylcholine, 4 lyso-phosphatidylethanolamine, 3 lyso-phosphatidylcholine, 3 phosphatidylserine, 1 lyso-phosphatidic acid, 1 lyso-phosphatidylglycerol, 1 lyso-phoshatidylinositol, and 1 phosphatidic acid), 23 triacylglycerols, 9 ceramides, and 2 sphingomyelin. The most abundant fatty acids identified were C16:0, C16:1, C18:0, and C18:3. Obtained lipid profiles allowed to distinguish the tested bacterial strains.

Problems with identifying and distinguishing salivary streptococci: a multi-instrumental approach.

Aim: The purpose of this study was to create an alternative protocol for the DNA-based identification of salivary microbiota focused on the distinguishing of Streptococcus species. Materials & methods: Salivary bacteria were identified using 16S rDNA sequencing and proteins and lipids profiling using MALDI-TOF/MS as well as FTIR analysis. Results: Most of the isolates belonged to streptococci - mostly the salivarious group indistinguishable by the molecular technique. In turn, MALDI analysis allowed for their fast and reliable classification. Although FTIR spectroscopy demonstrated the correct species classification, the spectra interpretation was time consuming and complicated. Conclusion: MALDI-TOF/MS demonstrated the biggest effectiveness in the identification and discrimination between the salivary streptococci, which could be easily incorporated in the workflow of routine microbiological laboratories.