Text-scanning patterns of blind readers using Optacon and braille.

Tactual reading usually requires the coordinated use of the forearm/hand motor and tactile sensory systems. Therefore, in a series of studies of tactual reading behavior, we chose to record the text-scanning patterns of adult blind readers in an attempt to gain further insight into the nature of this process. Reading behavior for four modes of tactual reading was recorded (embossed braille one-hand, embossed braille two-hands, Optacon/letterprint, and Optacon/Inkbraille) by detecting and recording the instantaneous position of light-emitting diodes unobtrusively attached to the finger(s) or the Optacon camera. In addition to the comparative evaluation of the four sets of reading patterns, the salient features of the Optacon/letterprint patterns were quantitatively analyzed in an attempt to characterize this particular mode of reading. The text-scanning patterns of Optacon readers have not been previously reported. In general the text-scanning behavior for all modes of tactual reading seems to be similar; the only remarkable difference appears to be in the reading rates. Regarding Optacon/letterprint performance, reading rate was found to be significantly and negatively correlated with line-changing time and the number of regressions. No significant correlation was evident between rate and regression magnitude.

Inkbraille as a potential new reading system for the blind.

Inkbraille, a reduced size ink-image version of the familiar braille code, was conceived in an attempt to sidestep the major disadvantages of embossed braille, while retaining the unsurpassed reading rates achieved by the blind using that code. Inkbraille would ultimately be translated by a specially designed hand-held electronic device with appropriate tactile output. Such a device is not yet available, so in this study we test the readability of Inkbraille when read by means of a commercially available electronic reading aid, the Optacon, which presents its output tactually on a field of vibrating pins which are sensed with a finger. Three modes of tactual reading were compared: conventional embossed braille, and the Opticon's vibrating-pinfield presentation of typed letters and its presentation of Inkbraille. All subjects were able to read Inkbraille upon initial exposure. Subjects who were tested in multiple sessions exhibited significant increases in Inkbraille reading rates after only limited exposure. Since Inkbraille and letterprint reading rates were the same in this study, the results led the authors to conclude that a rate limitation may have been imposed by the device (the Optacon) that was used to translate both the Inkbraille and the letterprint.

Effective sampling time for saccadic eye movement from experiments using a vergence input.

The results of analyzing the amplitude and latency of the saccadic component of the compound response are consistent with the notion that the saccadic system operates with a dead zone and an effective sampling time. The size of the dead zone was found to be 0.2 degrees. The latency between the onset of target motion and the onset of the saccade can be divided into three distinct time segments. The first is time for the target image to cross the dead zone boundary. This time segment is inversely proportional to target velocity. The second is the time between the dead zone crossing and the sample. This time segment has a constant duration of 191 msec. The remaining segment is the time between the sample and the saccade. If the target velocity is finite at the time of the sample, the duration of this segment decreases as target velocity increases. If the target velocity is zero at the time of the sample, this segment has a constant duration of about 70 msec.

Frequency characteristics of the saccadic eye movement.

Using a piecewise linear approach, individual saccadic eye movements have been Fourier decomposed in an attempt to determine the effect of saccadic amplitude on frequency characteristics. These characteristics were plotted in the traditional Bode plot form, showing gain and phase as a function of frequency for various eye movement amplitudes. Up to about one octave beyond the -3 db gain frequency, the limiting system dynamics represented by the saccadic trajectory of a given amplitude may be considered linear and second order. The -3 db gain frequency was used as a measure of bandwidth, and the -90 degrees phase crossover frequency was used as a measure of undamped natural frequency. These two quantities were used to calculate the damping factor. Both bandwidth and undamped natural frequency decrease with increasing saccadic eye movement amplitude. The damping factor shows no trend with amplitude and indicates approximate critical damping. When compared with the normal variation of characteristics for a given movement, the frequency characteristics of fixed-amplitude saccades showed no generalized trends with changes in direction or DC operating level of movement.