On the role of asymmetric molecular geometry in high-performance organic solar cells.

Although asymmetric molecular design has been widely demonstrated effective for organic photovoltaics (OPVs), the correlation between asymmetric molecular geometry and their optoelectronic properties is still unclear. To access this issue, we have designed and synthesized several symmetric-asymmetric non-fullerene acceptors (NFAs) pairs with identical physical and optoelectronic properties. Interestingly, we found that the asymmetric NFAs universally exhibited increased open-circuit voltage compared to their symmetric counterparts, due to the reduced non-radiative charge recombination. From our molecular-dynamic simulations, the asymmetric NFA naturally exhibits more diverse molecular interaction patterns at the donor (D):acceptor (A) interface as compared to the symmetric ones, as well as higher D:A interfacial charge-transfer state energy. Moreover, it is observed that the asymmetric structure can effectively suppress triplet state formation. These advantages enable a best efficiency of 18.80%, which is one of the champion results among binary OPVs. Therefore, this work unambiguously demonstrates the unique advantage of asymmetric molecular geometry, unveils the underlying mechanism, and highlights the manipulation of D:A interface as an important consideration for future molecular design.

Self-Assembled Interlayer Enables High-Performance Organic Photovoltaics with Power Conversion Efficiency Exceeding 20.

Interfacial layers (ILs) are prerequisites to form the selective charge transport for high-performance organic photovoltaics (OPVs) but mostly result in considerable parasitic absorption loss. Trimming the ILs down to a mono-molecular level via the self-assembled monolayer is an effective strategy to mitigate parasitic absorption loss. However, such a strategy suffers from inferior electrical contact with low surface coverage on rough surfaces and poor producibility. To address these issues, here, the self-assembled interlayer (SAI) strategy is developed, which involves a thin layer of 2-6 nm to form a full coverage on the substrate via both covalent and van der Waals bonds by using a self-assembled molecule of 2-(9H-carbazol-9-yl) (2PACz). Via the facile spin coating without further rinsing and annealing process, it not only optimizes the electrical and optical properties of OPVs, which enables a world-record efficiency of 20.17% (19.79% certified) but also simplifies the tedious processing procedure. Moreover, the SAI strategy is especially useful in improving the absorbing selectivity for semi-transparent OPVs, which enables a record light utilization efficiency of 5.34%. This work provides an effective strategy of SAI to optimize the optical and electrical properties of OPVs for high-performance and solar window applications.

Delayed Crystallization Kinetics Allowing High-Efficiency All-Polymer Photovoltaics with Superior Upscaled Manufacturing.

Though encouraging performance is achieved in small-area organic photovoltaics (OPVs), reducing efficiency loss when evoluted to large-area modules is an important but unsolved issue. Considering that polymer materials show benefits in film-forming processability and mechanical robustness, a high-efficiency all-polymer OPV module is demonstrated in this work. First, a ternary blend consisting of two polymer donors, PM6 and PBQx-TCl, and one polymer acceptor, PY-IT, is developed, with which triplet state recombination is suppressed for a reduced energy loss, thus allowing a higher voltage; and donor-acceptor miscibility is compromised for enhanced charge transport, thus resulting in improved photocurrent and fill factor; all these contribute to a champion efficiency of 19% for all-polymer OPVs. Second, the delayed crystallization kinetics from solution to film solidification is achieved that gives a longer operation time window for optimized blend morphology in large-area module, thus relieving the loss of fill factor and allowing a record efficiency of 16.26% on an upscaled module with an area of 19.3 cm2 . Besides, this all-polymer system also shows excellent mechanical stability. This work demonstrates that all-polymer ternary systems are capable of solving the upscaled manufacturing issue, thereby enabling high-efficiency OPV modules.

Thorough Optimization for Intrinsically Stretchable Organic Photovoltaics.

The development of intrinsically stretchable organic photovoltaics (is-OPVs) with a high efficiency is of significance for practical application. However, their efficiencies lag far behind those of rigid or even flexible counterparts. To address this issue, an advanced top-illuminated OPV is designed and fabricated, which is intrinsically stretchable and has a high performance, through systematic optimizations from material to device. First, the stretchability of the active layer is largely increased by adding a low-elastic-modulus elastomer of styrene-ethylene-propylene-styrene tri-block copolymer (SEPS). Second, the stretchability and conductivity of the opaque electrode are enhanced by a conductive polymer/metal (denoted as M-PH1000@Ag) composite electrode strategy. Third, the optical and electrical properties of a sliver nanowire transparent electrode are improved by a solvent vapor annealing strategy. High-performance is-OPVs are successfully fabricated with a top-illuminated structure, which provides a record-high efficiency of 16.23%. Additionally, by incorporating 5-10% elastomer, a balance between the efficiency and stretchability of the is-OPVs is achieved. This study provides valuable insights into material and device optimizations for high-efficiency is-OPVs, with a low-cost production and excellent stretchability, which indicates a high potential for future applications of OPVs.

Evaporable Fullerene Indanones with Controlled Amorphous Morphology as Electron Transport Layers for Inverted Perovskite Solar Cells.

Fullerenes are among the most commonly used electron-transporting materials (ETMs) in inverted perovskite solar cells (IPSCs). Although versatile functionalized fullerene derivatives have shown excellent performance in IPSCs, pristine [60]fullerene (C60) is still the most widely used in devices mainly because of its uniform morphology by thermal deposition. However, thermally evaporable fullerene derivatives have not yet been achieved. Herein, we developed a series of evaporable fullerene derivatives, referred to as fullerene indanones (FIDOs), affording IPSCs with high power conversion efficiency (PCE) and long-term storage stability. The FIDOs were designed with a unique architecture in which the fullerene moiety and a benzene ring moiety are linked via a five-membered carbon ring in benzene ring plane. This molecular arrangement affords exceptional thermal stability, allowing the FIDOs to withstand harsh thermal deposition conditions. Moreover, by manipulating the steric bulk of the functional groups, we could control the state of the organic film from crystalline to amorphous. Subsequently, we used FIDOs as an electron transport layer (ETL) in IPSCs. Thanks to the suitable energy level and dual-passivation effect of FIDOs compared with a reference ETL using C60, the device using FIDOs achieved an open-circuit voltage of 1.16 V and a fill factor of 0.77. As a result, the PCE reached 22.11%, which is superior to 20.45% of the best-performing reference device. Most importantly, the FIDO-based IPSC devices exhibited exceptional stability in comparison to the reference device due to the stability of the amorphous ETL films.

Solid Additive-Assisted Layer-by-Layer Processing for 19% Efficiency Binary Organic Solar Cells.

Morphology is of great significance to the performance of organic solar cells (OSCs), since appropriate morphology could not only promote the exciton dissociation, but also reduce the charge recombination. In this work, we have developed a solid additive-assisted layer-by-layer (SAA-LBL) processing to fabricate high-efficiency OSCs. By adding the solid additive of fatty acid (FA) into polymer donor PM6 solution, controllable pre-phase separation forms between PM6 and FA. This intermixed morphology facilitates the diffusion of acceptor Y6 into the donor PM6 during the LBL processing, due to the good miscibility and fast-solvation of the FA with chloroform solution dripping. Interestingly, this results in the desired morphology with refined phase-separated domain and vertical phase-separation structure to better balance the charge transport /collection and exciton dissociation. Consequently, the binary single junction OSCs based on PM6:Y6 blend reach champion power conversion efficiency (PCE) of 18.16% with SAA-LBL processing, which can be generally applicable to diverse systems, e.g., the PM6:L8-BO-based devices and thick-film devices. The efficacy of SAA-LBL is confirmed in binary OSCs based on PM6:L8-BO, where record PCEs of 19.02% and 16.44% are realized for devices with 100 and 250 nm active layers, respectively. The work provides a simple but effective way to control the morphology for high-efficiency OSCs and demonstrates the SAA-LBL processing a promising methodology for boosting the industrial manufacturing of OSCs.

Compromising Charge Generation and Recombination of Organic Photovoltaics with Mixed Diluent Strategy for Certified 19.4% Efficiency.

The ternary blend is demonstrated as an effective strategy to promote the device performance of organic photovoltaics (OPVs) due to the dilution effect. While the compromise between the charge generation and recombination remains a challenge. Here, a mixed diluent strategy for further improving the device efficiency of OPV is proposed. Specifically, the high-performance OPV system with a polymer donor, i.e., PM6, and a nonfullerene acceptor (NFA), i.e., BTP-eC9, is diluted by the mixed diluents, which involve a high bandgap NFA of BTP-S17 and a low bandgap NFA of BTP-S16 (similar with that of the BTP-eC9). The BTP-S17 of better miscibility with BTP-eC9 can dramatically enhance the open-circuit voltage (VOC ), while the BTP-S16 maximizes the charge generation or the short-circuit current density (JSC ). The interplay of BTP-17 and BTP-S16 enables better compromise between charge generation and recombination, thus leading to a high device performance of 19.76% (certified 19.41%), which is the best among single-junction OPVs. Further analysis on carrier dynamics validates the efficacy of mixed diluents for balancing charge generation and recombination, which can be further attributed to the more diverse energetic landscapes and improved morphology. Therefore, this work provides an effective strategy for high-performance OPV for further commercialization.

Flexible Miniaturized Multispectral Detector Derived from Blade-Coated Organic Narrowband Response Unit Array.

Multispectral sensing is extremely desired in intelligent systems, e.g., autonomous vehicles, encrypted information communication, and health biometric monitoring, due to its highly sensitive spectral discrimination ability. Nevertheless, rigid bulky optics and delicate optical paths in devices significantly increase their complexity and size, which subsequently impede their integration in smart optoelectronic chips for universal applications. In this work, a filterless miniaturized multispectral photodetector is realized with an organic narrowband response unit array. With the manipulation of Frenkel exciton dissociation in active layers, a series of narrowband organic sensing units with full-width-at-half-maximum (fwhm) narrowing to ∼50 nm are achieved from 700 to 1050 nm with a laudable performance of responsivity of over 60 mA/W, -3 dB bandwidth over 10 kHz, linear dynamic range (LDR) reaching ∼120 dB, and a low noise current of less than 4 × 10-14 A·Hz-0.5. Furthermore, a 6 × 8 multispectral sensing array on a flexible substrate was fabricated with blade-coating. Assisted by a computational process, we successfully demonstrate the spectral recognition with a resolution of ∼50 nm and a mismatch of ∼10 nm. Finally, the function of matter identification is successfully achieved with our multispectral detector array.

Balancing the Selective Absorption and Photon-to-Electron Conversion for Semitransparent Organic Photovoltaics with 5.0% Light-Utilization Efficiency.

Efficiently converting invisible light while allowing full visible light transmission is key to achieving high-performance semitransparent organic photovoltaics (ST-OPVs). Here, a detailed balance strategy is explored to optimize the ST-OPV via taking both absorption and carrier dynamics into consideration. Based on this principle, comprehensive optimizations are carried out, including a ternary strategy, donor:acceptor blend ratio, thickness, antireflection, etc., to compromise the invisible energy conversion and visible transmission for high-performance ST-OPVs. As a result, the opaque OPV device exhibits a champion power conversion efficiency of 19.35% (certificated 19.07%), and most strikingly, the best ST-OPV shows a remarkably high light-utilization efficiency of 5.0%, where the efficiency and the average visible transmission are 12.95% and 38.67%, respectively. An efficiency of 12.09% is achieved on the upscaled device with an area of 1.05 cm2 , demonstrating its promise for large-area fabrication. These results are among the best values for ST-OPVs. Besides, it is demonstrated that the ST-OPV exhibits good infrared light-reflection capability for thermal control. This work provides a rational design of balancing the absorbing selectivity and photon-to-electron conversion for high-performance ST-OPVs, and may pave the way toward the practical application of solar windows.

Achieving and Understanding of Highly Efficient Ternary Organic Photovoltaics: From Morphology and Energy Loss to Working Mechanism.

Ternary strategy, adding an additional donor (D) or acceptor (A) into conventional binary D:A blend, has shown great potential in improving photovoltaic performances of organic photovoltaics (OPVs) for practical applications. Herein, this review is presented on how efficient ternary OPVs are realized from the aspects of morphology, energy loss, and working mechanism. As to morphology, the role of third component on the formation of preferred alloy-like-phase and vertical-phase, which are driven by the miscibility tuning, is discussed. For energy loss, the effect of the third component on the luminescence enhancement and energetic disordering suppression, which lead to favorable increase of voltage, is presented. Regarding working mechanism, dilution effect and relationships between two acceptors or donor/acceptor, which explain the observed device parameters variations, are analyzed. Finally, some future directions concerning ternary OPVs are pointed out. Therefore, this review can provide a comprehensive understanding of working principles and effective routes for high-efficiency ternary systems, advancing the commercialization of OPVs.

Versatile Sequential Casting Processing for Highly Efficient and Stable Binary Organic Photovoltaics.

Forming an ideal bulk heterojunction (BHJ) morphology is a critical issue governing the photon to electron process in organic solar cells (OSCs). Complementary to the widely-used blend casting (BC) method for BHJ construction, sequential casting (SC) can also enable similar or even better morphology and device performance for OSCs. Here, BC and SC methods on three representative donor:acceptor (D:A) blends are utilized, that is, PM6:PC71 BM, PM6:IT-4F and PM6:L8-BO. Higher power conversion efficiencies (PCEs) in all cases by taking advantage of beneficial morphology from SC processing are achieved, and a champion PCE of 18.86% (certified as 18.44%) based on the PM6:L8-BO blend is reached, representing the record value among binary OSCs. The observations on phase separation and vertical distribution inspire the proposal of the swelling-intercalation phase-separation model to interpret the morphology evolution during SC processing. Further, the vertical phase segregation is found to deliver an improvement of device performance via affecting the charge transport and collection processes, as evidenced by the D:A-ratio-dependent photovoltaic properties. Besides, OSCs based on SC processing show advantages on device photostability and upscale fabrication. This work demonstrates the versatility and efficacy of the SC method for BHJ-based OSCs.

Asymmetric electron acceptor enables highly luminescent organic solar cells with certified efficiency over 18.

Enhancing the luminescence property without sacrificing the charge collection is one key to high-performance organic solar cells (OSCs), while limited by the severe non-radiative charge recombination. Here, we demonstrate efficient OSCs with high luminescence via the design and synthesis of an asymmetric non-fullerene acceptor, BO-5Cl. Blending BO-5Cl with the PM6 donor leads to a record-high electroluminescence external quantum efficiency of 0.1%, which results in a low non-radiative voltage loss of 0.178 eV and a power conversion efficiency (PCE) over 15%. Importantly, incorporating BO-5Cl as the third component into a widely-studied donor:acceptor (D:A) blend, PM6:BO-4Cl, allows device displaying a high certified PCE of 18.2%. Our joint experimental and theoretical studies unveil that more diverse D:A interfacial conformations formed by asymmetric acceptor induce optimized blend interfacial energetics, which contributes to the improved device performance via balancing charge generation and recombination.

Non-Halogenated Solvents Processed Efficient ITO-Free Flexible Organic Solar Cells with Upscaled Area.

Organic solar cells (OSCs) show the potential to harness solar energy at a lower cost and in a greener way with the merits of mechanical flexibility and potential low-cost upscaling production with solution processing. Meanwhile, the common use of toxic halogenated solvents causes pollution to the natural environment, and thus, needs to be avoided. Following the authors' previous work on the design of top-illuminated ultrathin Ag-based device structure highlighting most merits of OSC, herein non-halogen solvent and additive processing OSCs are presented, which exhibit high power conversion efficiency (PCE) of 17.64%, close to the best PCE with the commonly used halogen solvent. Interestingly, it is observed that the additive and the multicomponent strategy (blending third component BTP-S2 into PM6:L8-BO binary blend) synergistically affect the optimal morphology and device performance. Finally, OSC devices featuring green solvent processing, indium tin oxide-free, flexibility, and upscaling merits are fabricated and exhibit the best PCE of 13.76% with high mechanical robustness and good stability against heat or light illumination. This work provides a prospective potential for manufacturing the OSC toward practical applications.

High-Efficiency ITO-Free Organic Photovoltaics with Superior Flexibility and Upscalability.

Developing indium-tin-oxide (ITO)-free flexible organic photovoltaics (OPVs) with upscaling capacity is of great significance for practical applications of OPVs. Unfortunately, the efficiencies of the corresponding devices lag far behind those of ITO-based rigid small-area counterparts. To address this issue, an advanced device configuration is designed and fabricated featuring a top-illuminated structure with ultrathin Ag as the transparent electrode. First, a conjugated polyelectrolyte layer, i.e., PCP-Li, is inserted to effectively connect the bottom Ag anode and the hole transport layer, achieving good photon to electron conversion. Second, charge collecting grids are deposited to suppress the increased resistance loss with the upscaling of the device area, realizing almost full retention of device efficiency from 0.06 to 1 cm2 . Third, the designed device delivers the best efficiency of 15.56% with the area of 1 cm2 on polyimide substrate, representing as the record among the ITO-free, large-area, flexible OPVs. Interestingly, the device exhibits no degradation after 100 000 bending cycles with a radius of 4 mm, which is the best result for flexible OPVs. This work provides insight into device structure design and optimization for OPVs with high efficiency, low cost, superior flexibility, and upscaling capacity, indicating the potential for the future commercialization of OPVs.

Dilution effect for highly efficient multiple-component organic solar cells.

Although the multiple-component (MC) blend strategy has been frequently used as a very effective way to improve the performance of organic solar cells (OSCs), there is a strong need to understand the fundamental working mechanism and material selection rule for achieving optimal MC-OSCs. Here we present the 'dilution effect' as the mechanism for MC-OSCs, where two highly miscible components are molecularly intermixed. Contrary to the aggregation-induced non-radiative decay, the dilution effect enables higher luminescence quantum efficiencies and open-circuit voltages (VOC) in MC-OSCs via suppressed electron-vibration coupling. The continuously broadened bandgap together with reduced electron-vibration coupling also explains the composition-dependent VOC in ternary blends well. Moreover, we show that electrons can transfer between different acceptors, depending on the energy offset between them, which contributes to the largely unperturbed charge transport and high fill factors in MC-OSCs. The discovery of the dilution effect enables the demonstration of a high power conversion efficiency of 18.31% in an MC-OSC.

Unveiling structure-performance relationships from multi-scales in non-fullerene organic photovoltaics.

Unveiling the correlations among molecular structures, morphological characteristics, macroscopic properties and device performances is crucial for developing better photovoltaic materials and achieving higher efficiencies. To achieve this goal, a comprehensive study is performed based on four state-of-the-art non-fullerene acceptors (NFAs), which allows to systematically examine the above-mentioned correlations from different scales. It's found that extending conjugation of NFA shows positive effects on charge separation promotion and non-radiative loss reduction, while asymmetric terminals can maximize benefits from both terminals. Another molecular optimization is from alkyl chain tuning. The shortened alkyl side chain results in strengthened terminal packing and decreased π-π distance, which contribute high carrier mobility and finally the high charge collection efficiency. With the most-acquired benefits from molecular structure and macroscopic factors, PM6:BTP-S9-based organic photovoltaics (OPVs) exhibit the optimal efficiency of 17.56% (certified: 17.4%) with a high fill factor of 78.44%, representing the best among asymmetric acceptor based OPVs. This work provides insight into the structure-performance relationships, and paves the way toward high-performance OPVs via molecular design.

Synergistic Effects of Chlorination and Branched Alkyl Side Chain on the Photovoltaic Properties of Simple Non-Fullerene Acceptors with Quinoxaline as the Core.

To date, the fused-ring electron acceptors show the best photovoltaic performances, and the development of simple non-fullerene acceptors via intramolecular noncovalent interactions can reduce synthetic costs. In this work, four simple non-fullerene acceptors with an A-D-A'-D-A configuration (QCIC1, QCIC2, QCIC3, and QCIC4) were synthesized. They contained the same conjugated backbone (A': quinoxaline; D: cyclopentadithiophene; A: dicyano-indanone) but different halogen atoms and alkyl side chains. Due to the chlorination on the end-groups and the most and/or longest branched alkyl side chains on the backbone, the blended film composed of QCIC3 and donor poly{[2,6'-4,8-di(5-ethylhexylthienyl)benzo [1,2-b : 4,5-b']dithiophene]-alt-[5,5-(1',3'-di-2-thienyl-5',7'-bis(2-ethylhexyl)benzo[1',2'-c : 4',5'-c']dithiophene-4,8-dione)]} (PBDB-T) exhibited the strongest π-π stacking and the most suitable phase-separation domains among the four blended films. Therefore, the QCIC3-based organic solar cells yielded the highest power conversion efficiency of 10.55 %. This work provides a pathway to optimize the molecular arrangements and enhance the photovoltaic property of simple electron acceptors through subtle chemical modifications.

Layer-by-Layer Processed Ternary Organic Photovoltaics with Efficiency over 18.

Obtaining a finely tuned morphology of the active layer to facilitate both charge generation and charge extraction has long been the goal in the field of organic photovoltaics (OPVs). Here, a solution to resolve the above challenge via synergistically combining the layer-by-layer (LbL) procedure and the ternary strategy is proposed and demonstrated. By adding an asymmetric electron acceptor, BTP-S2, with lower miscibility to the binary donor:acceptor host of PM6:BO-4Cl, vertical phase distribution can be formed with donor-enrichment at the anode and acceptor-enrichment at the cathode in OPV devices during the LbL processing. In contrast, LbL-type binary OPVs based on PM6:BO-4Cl still show bulk-heterojunction like morphology. The formation of the vertical phase distribution can not only reduce charge recombination but also promote charge collection, thus enhancing the photocurrent and fill factor in LbL-type ternary OPVs. Consequently, LbL-type ternary OPVs exhibit the best efficiency of 18.16% (certified: 17.8%), which is among the highest values reported to date for OPVs. The work provides a facile and effective approach for achieving high-efficiency OPVs with expected morphologies, and demonstrates the LbL-type ternary strategy as being a promising procedure in fabricating OPV devices from the present laboratory study to future industrial production.

Narrow Bandpass and Efficient Semitransparent Organic Solar Cells Based on Bioinspired Spectrally Selective Electrodes.

The visual aesthetic that involves color, brightness, and glossiness is of great importance for building integrated photovoltaics. Semitransparent organic solar cells (ST-OSCs) are thus considered as the most promising candidate due to their superiority in transparency and efficiency. However, the realization of high color purity with narrow bandpass transmitted light usually causes the severely suppressed transparency in ST-OSCs. Herein, we present a spectrally selective electrode (SSE) by imitating the integrating strategy of beetle cuticle for achieving narrow bandpass ST-OSCs with high efficiency and long-term stability. The proposed SSE allows for efficient light-selective passage, leading to tunable narrow bandpass transmitted light from violet to red. An optimized power conversion efficiency of 15.07% is achieved for colorful ST-OSCs, which exhibit color purity close to 100% and a peak transmittance approaching 30%. Long-term stability is also improved for ST-OSCs made with this SSE due to the light-rejecting and the moisture-blocking abilities. The realization of bright and colorful ST-OSCs also indicates the application potential of SSEs in light-emitting diodes, lasers, and photodetectors.

Highly Efficient Semitransparent Solar Cells with Selective Absorption and Tandem Architecture.

Semitransparent (ST) photovoltaics (PVs) with selective absorption in the UV or/and near-infrared (NIR) range(s) and reduced energy losses, are critical for high-efficiency solar-window applications. Here, a high-performance tandem ST-PV with selected absorption in the desirable regions of the solar spectrum is demonstrated. An ultralarge-bandgap perovskite film (FAPbBr2.43 Cl0.57 , Eg ≈ 2.36 eV) is first developed to fulfil efficient selective absorption in the UV region. After optimization, the corresponding ST single junction (SJ) PV exhibits an averaged transmittance (AVT) of ≈68% and an efficiency of ≈7.5%. By sequentially reducing the visible absorbing component in a low-bandgap organic bulk-heterojunction layer, an ST-PV with selective absorption in the NIR is achieved with a power conversion efficiency (PCE) of 5.9% and a high AVT of 62%. The energy loss associated with the SJ ST-PVs is further reduced with a tandem architecture, which affords a high PCE of 10.7%, an AVT of 52.91%, and a light utilization efficiency up to 5.66%. These results represent the best balance of AVT and PCE among all ST-PVs reported so far, and this design should pave the road for solar windows of high performance.