High-Entropy Perovskite Thin Film in the Gd-Nd-Sm-La-Y-Co System: Deposition, Structure and Optoelectronic Properties.

Multicomponent equimolar perovskite oxides (ME-POs) have recently emerged as a highly promising class of materials with unique synergistic effects, making them well-suited for applications in such areas as photovoltaics and micro- and nanoelectronics. High-entropy perovskite oxide thin film in the (Gd0.2Nd0.2La0.2Sm0.2Y0.2)CoO3 (RECO, where RE = Gd0.2Nd0.2La0.2Sm0.2Y0.2, C = Co, and O = O3) system was synthesized via pulsed laser deposition. The crystalline growth in an amorphous fused quartz substrate and single-phase composition of the synthesized film was confirmed by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). Surface conductivity and activation energy were determined using a novel technique implementing atomic force microscopy (AFM) in combination with current mapping. The optoelectronic properties of the deposited RECO thin film were characterized using UV/VIS spectroscopy. The energy gap and nature of optical transitions were calculated using the Inverse Logarithmic Derivative (ILD) and four-point resistance method, suggesting direct allowed transitions with altered dispersions. The narrow energy gap of RECO, along with its relatively high absorption properties in the visible spectrum, positions it as a promising candidate for further exploration in the domains of low-energy infrared optics and electrocatalysis.

Magnetoresistive Properties of Nanocomposites Based on Ferrite Nanoparticles and Polythiophene.

In the presented study, we have synthesized six nanocomposites based on various magnetic nanoparticles and a conducting polymer, poly(3-hexylthiophene-2,5-diyl) (P3HT). Nanoparticles were either coated with squalene and dodecanoic acid or with P3HT. The cores of the nanoparticles were made of one of three different ferrites: nickel ferrite, cobalt ferrite, or magnetite. All synthesized nanoparticles had average diameters below 10 nm, with magnetic saturation at 300 K varying between 20 to 80 emu/g, depending on the used material. Different magnetic fillers allowed for exploring their impact on the conducting properties of the materials, and most importantly, allowed for studying the influence of the shell on the final electromagnetic properties of the nanocomposite. The conduction mechanism was well defined with the help of the variable range hopping model, and a possible mechanism of electrical conduction was proposed. Finally, the observed negative magnetoresistance of up to 5.5% at 180 K, and up to 1.6% at room temperature, was measured and discussed. Thoroughly described results show the role of the interface in the complex materials, as well as clarify room for improvement of the well-known magnetoelectric materials.

Reactive Sintering of Dysprosium-Iron Garnet via a Perovskite-Hematite Solid State Reaction and Physical Properties of the Material.

In this paper, we report on a successful synthesis of dysprosium iron garnet Dy3Fe5O12 (DyIG) by a reactive synthesis method involving dysprosium iron perovskite and hematite. Phase formation was traced using dilatometry, and XRD measurements attested to the formation of the desired structure. Samples with relative density close to 97% were fabricated. The samples were characterized using vibrating sample magnetometry, dielectric spectroscopy, and UV-Vis-NIR spectroscopy. Magnetic properties were probed in temperatures between 80 and 700 K with a maximum applied field of 1 kOe. The measurements revealed several effects: the compensation of magnetic moments at a certain temperature, the inversion of the magnetocaloric effect, and the ability to measure the Curie temperature of the material. Activation energy was determined from UV-Vis-NIR and dielectric spectroscopy measurements. Characteristic magnetic temperatures and activation energy values of the samples were similar to bulk DyIG obtained using other methods.

Cobalt Content Effect on the Magnetic Properties of Ni50-xCoxMn35.5In14.5 Annealed Ribbons.

We present a study of the annealing effect and its influence on magnetic and structural properties for a series of Heusler alloys Ni50-xCoxMn35.5In14.5 (x=0,3,5) prepared in ribbon form. We studied the morphology and composition using scanning electron microscopy (SEM) equipped with an X-ray microanalyzer (EDX). The magnetic properties were determined by two methods: electron magnetic resonance (EMR) and vibrating sample magetometer (VSM). We found that cobalt content in the annealed samples reveals an additional magnetic phase transition at lower temperatures.

High-Entropy Perovskites as Multifunctional Metal Oxide Semiconductors: Synthesis and Characterization of (Gd0.2Nd0.2La0.2Sm0.2Y0.2)CoO3.

Single-phase multicomponent perovskite-type cobalt oxide containing five cations in equiatomic amounts on the A-site, namely, (Gd0.2Nd0.2La0.2Sm0.2Y0.2)CoO3, has been synthesized via the modified coprecipitation hydrothermal method. Using an original approach for heat treatment, which comprises quenching utilizing liquid nitrogen as a cooling medium, a single-phase ceramic with high configuration entropy, crystallizing in an orthorhombic distorted structure was obtained. It reveals the anomalous temperature dependence of the lattice expansion with two weak transitions at approx. 80 and 240 K that are assigned to gradual crossover from the low- via intermediate- to high-spin state of Co3+. The compound exhibits weak ferromagnetism at T ≤ 10 K and signatures of antiferromagnetic correlations in the paramagnetic phase. Ab initio calculations predict a band gap Δ = 1.18 eV in the ground-state electronic structure with the dominant contribution of O_p and Co_d orbitals in the valence and conduction bands, respectively. Electronic transport measurements confirm the negative temperature coefficient of resistivity characteristic to a semiconducting material and reveal a sudden drop in activation energy at T ∼ 240 K from E a ∼ 1 eV in the low-temperature phase to E a ∼ 0.3 eV at room temperature. The possibility of fine tuning of the semiconducting band gap via a subtle change in A-site stoichiometry is discussed.

Surface-Step-Induced Magnetic Anisotropy in Epitaxial LSMO Deposited on Engineered STO Surfaces.

Changes in stoichiometry, temperature, strain and other parameters dramatically alter properties of LSMO perovskite. Thus, the sensitivity of LSMO may enable control of the magnetic properties of the film. This work demonstrates the capabilities of interface engineering to achieve the desired effects. Three methods of preparing STO substrates were conducted, i.e., using acid, buffer solution, and deionized water. The occurrence of terraces and their morphology depend on the preparation treatment. Terraces propagate on deposited layers and influence LSMO properties. The measurements show that anisotropy depends on the roughness of the substrate, the method of preparing the substrate, and oxygen treatment. The collected results suggest that the dipolar mechanism may be the source of LSMO anisotropy.

Room-Temperature Ferromagnetism in InSb-Mn Nanowires.

The successful synthesis of one-dimensional nanostructures of a narrow band gap semiconductor, exhibiting a ferromagnetic response at room temperature, is reported. High-quality nanowires of InSb-Mn have been produced by template-assisted pulse electrodeposition. Detailed structural and spectroscopic characterizations revealed good crystallinity, a narrow size distribution of the nanostructures, and the ability to control the Mn doping level. The dominating magnetic response at a cryogenic temperature evolves with an increasing Mn concentration from paramagnetic through antiferromagnetic to ferromagnetic. A robust ferromagnetic response of InSb nanowires doped with 2.5% at. of Mn is retained up to a Curie temperature of nearly 500 K.

Publisher Correction: Influence of intermixing at the Ta/CoFeB interface on spin Hall angle in Ta/CoFeB/MgO heterostructures.

A correction to this article has been published and is linked from the HTML version of this paper. The error has been fixed in the paper.

Influence of intermixing at the Ta/CoFeB interface on spin Hall angle in Ta/CoFeB/MgO heterostructures.

When a current is passed through a non-magnetic metal with strong spin-orbit coupling, an orthogonal spin current is generated. This spin current can be used to switch the magnetization of an adjacent ferromagnetic layer or drive its magnetization into continuous precession. The interface, which is not necessarily sharp, and the crystallographic structure of the nonmagnetic metal can both affect the strength of current-induced spin-orbit torques. Here, we investigate the effects of interface intermixing and film microstructure on spin-orbit torques in perpendicularly magnetized Ta/Co40Fe40B20/MgO trilayers with different Ta layer thickness (5 nm, 10 nm, 15 nm), greater than the spin diffusion length. Effective spin-orbit torques are determined from harmonic Hall voltage measurements performed at temperatures ranging from 20 K to 300 K. We account for the temperature dependence of damping-like and field-like torques by including an additional contribution from the Ta/CoFeB interface in the spin diffusion model. Using this approach, the temperature variations of the spin Hall angle in the Ta underlayer and at the Ta/CoFeB interface are determined separately. Our results indicate an almost temperature-independent spin Hall angle of [Formula: see text] in Ta and a strongly temperature-dependent [Formula: see text] for the intermixed Ta/CoFeB interface.