Debonding of LDSVs utilising Er,Cr:YSGG laser irradiation with fractional technique: an in vitro study.

BACKGROUND: The removal of porcelain laminate veneers with rotary instruments could be accompanied by microfractures because differentiation of the veneer from the dental structure and resin cement is not a highly selective procedure. This can lead to scratches and overheating of the enamel and patient discomfort. Therefore, this in vitro research aimed to examine the effectiveness of the 2790 nm Er,Cr:YSGG laser utilizing a fractional technique to debond lithium disilicate veneer. METHODS: Six groups of 30 extracted permanent bovine mandibular incisors were selected. Twenty-five samples, G1-5, (n = 5) laser-irradiated groups, and the last five samples (C) were considered the control group. The tested groups were irradiated with 3-5 W output power of Er,Cr:YSGG laser for time intervals of 50 s. During irradiation, the temperature in the pulp chamber was monitored using a thermocouple connected to a digital multilogger thermometer inside the sample's pulp chamber. Subsequently, the shear bond strength was measured for all groups. Furthermore, the remaining adhesive index was measured using a stereomicroscope, the area was analysed, and then transformed into scores. Finally, one untreated sample and two samples of the highest power value from laser-treated groups were examined using a scanning electron microscope (SEM) for their surface morphology. RESULTS: All debonding protocols were safe regarding intrapulpal temperature increment. The highest temperature elevation was recorded at 5 W, which increased by 1.7 °C. Considering the shear bond strength measurement, there was a significant reduction after laser irradiation for G1-5 compared with group C. CONCLUSIONS: Er,Cr:YSGG laser with a fractional technique can be used successfully for veneer removal. Besides safe temperature rising, veneers can be reused because there was neither a fractured specimen during the whole study nor major irregularities or cracks shown in SEM pictures analysis for the veneer surfaces; thus, they can be removed quickly, safely, and comfortably using Er,Cr:YSGG. © 2023 Australian Dental Association.

EM single particle analysis of the ATP-dependent BchI complex of magnesium chelatase: an AAA+ hexamer.

BchI, belonging to the AAA+ -protein family, forms the enzyme magnesium chelatase together with BchD and BchH. This enzyme catalyses the insertion of Mg2+ into protoporphyrin IX upon ATP hydrolysis. Previous studies have indicated that BchI forms ATP-dependent complexes and it is a member of the AAA+ -protein family (ATPases associated with various cellular activities) and it was suggested based on structural homology that the BchI formed hexameric complexes. AAA+ -proteins are Mg2+ -dependent ATPases that normally form oligomeric ring complexes in the presence of ATP. Single particle analysis of fully formed ring complexes of BchI observed by negative staining EM indicate that the BchI has strong 6- and 2-fold rotational symmetries and a weaker 4-fold rotational symmetry which are reminiscent of DNA helicase. A 2D average of the fully formed BchI-ATP ring complex is presented here from images of the complex obtained from negative staining EM. Other complexes are also observed in the EM micrographs and the class averages of these are indicative of the fragility and dynamic nature of the BchI complex which has been reported and they are suggestive of partially circular complexes with six or less protomers per particle. The resolution of the average circular complex is estimated at approximately 30A and it is similar in shape and size to an atomic resolution hexameric model of BchI rendered at 30A.

Interplay between an AAA module and an integrin I domain may regulate the function of magnesium chelatase.

In chlorophyll biosynthesis, insertion of Mg(2+) into protoporphyrin IX is catalysed in an ATP-dependent reaction by a three-subunit (BchI, BchD and BchH) enzyme magnesium chelatase. In this work we present the three-dimensional structure of the ATP-binding subunit BchI. The structure has been solved by the multiple wavelength anomalous dispersion method and refined at 2.1 A resolution to the crystallographic R-factor of 22.2 % (R(free)=24.5 %). It belongs to the chaperone-like "ATPase associated with a variety of cellular activities" (AAA) family of ATPases, with a novel arrangement of domains: the C-terminal helical domain is located behind the nucleotide-binding site, while in other known AAA module structures it is located on the top. Examination by electron microscopy of BchI solutions in the presence of ATP demonstrated that BchI, like other AAA proteins, forms oligomeric ring structures. Analysis of the amino acid sequence of subunit BchD revealed an AAA module at the N-terminal portion of the sequence and an integrin I domain at the C terminus. An acidic, proline-rich region linking these two domains is suggested to contribute to the association of BchI and BchD by binding to a positively charged cleft at the surface of the nucleotide-binding domain of BchI. Analysis of the amino acid sequences of BchI and BchH revealed integrin I domain-binding sequence motifs. These are proposed to bind the integrin I domain of BchD during the functional cycle of magnesium chelatase, linking porphyrin metallation by BchH to ATP hydrolysis by BchI. An integrin I domain and an acidic and proline-rich region have been identified in subunit CobT of cobalt chelatase, clearly demonstrating its homology to BchD. These findings, for the first time, provide an insight into the subunit organisation of magnesium chelatase and the homologous colbalt chelatase.

Structure of ribosomal protein TL5 complexed with RNA provides new insights into the CTC family of stress proteins.

The crystal structure of Thermus thermophilus ribosomal protein TL5 in complex with a fragment of Escherichia coli 5S rRNA has been determined at 2.3 A resolution. The protein consists of two domains. The structure of the N-terminal domain is close to the structure of E. coli ribosomal protein L25, but the C-terminal domain represents a new fold composed of seven beta-strands connected by long loops. TL5 binds to the RNA through its N-terminal domain, whereas the C-terminal domain is not included in this interaction. Cd(2+) ions, the presence of which improved the crystal quality significantly, bind only to the protein component of the complex and stabilize the protein molecule itself and the interactions between the two molecules in the asymmetric unit of the crystal. The TL5 sequence reveals homology to the so-called general stress protein CTC. The hydrophobic cores which stabilize both TL5 domains are highly conserved in CTC proteins. Thus, all CTC proteins may fold with a topology close to that of TL5.

A decade of progress in understanding the structural basis of protein synthesis.

The key reaction of protein synthesis, peptidyl transfer, is catalysed in all living organisms by the ribosome - an advanced and highly efficient molecular machine. During the last decade extensive X-ray crystallographic and NMR studies of the three-dimensional structure of ribosomal proteins, ribosomal RNA components and their complexes with ribosomal proteins, and of several translation factors in different functional states have taken us to a new level of understanding of the mechanism of function of the protein synthesis machinery. Among the new remarkable features revealed by structural studies, is the mimicry of the tRNA molecule by elongation factor G, ribosomal recycling factor and the eukaryotic release factor 1. Several other translation factors, for which three-dimensional structures are not yet known, are also expected to show some form of tRNA mimicry. The efforts of several crystallographic and biochemical groups have resulted in the determination by X-ray crystallography of the structures of the 30S and 50S subunits at moderate resolution, and of the structure of the 70S subunit both by X-ray crystallography and cryo-electron microscopy (EM). In addition, low resolution cryo-EM models of the ribosome with different translation factors and tRNA have been obtained. The new ribosomal models allowed for the first time a clear identification of the functional centres of the ribosome and of the binding sites for tRNA and ribosomal proteins with known three-dimensional structure. The new structural data have opened a way for the design of new experiments aimed at deeper understanding at an atomic level of the dynamics of the system.

Archaeal ribosomal protein L1: the structure provides new insights into RNA binding of the L1 protein family.

BACKGROUND: L1 is an important primary rRNA-binding protein, as well as a translational repressor that binds mRNA. It was shown that L1 proteins from some bacteria and archaea are functionally interchangeable within the ribosome and in the repression of translation. The crystal structure of bacterial L1 from Thermus thermophilus (TthL1) has previously been determined. RESULTS: We report here the first structure of a ribosomal protein from archaea, L1 from Methanococcus jannaschii (MjaL1). The overall shape of the two-domain molecule differs dramatically from that of its bacterial counterpart (TthL1) because of the different relative orientations of the domains. Two strictly conserved regions of the amino acid sequence, each belonging to one of the domains and positioned close to each other in the interdomain cavity of TthL1, are separated by about 25 A in MjaL1 owing to a significant opening of the structure. These regions are structurally highly conserved and are proposed to be the specific RNA-binding sites. CONCLUSIONS: The unusually high RNA-binding affinity of MjaL1 might be explained by the exposure of its highly conserved regions. The open conformation of MjaL1 is strongly stabilized by nonconserved interdomain interactions and suggests that the closed conformations of L1 (as in TthL1) open upon RNA binding. Comparison of the two L1 protein structures reveals a high conformational variability of this ribosomal protein. Determination of the MjaL1 structure offers an additional variant for fitting the L1 protein into electron-density maps of the 50S ribosomal subunit.

Structural and mechanistic basis of porphyrin metallation by ferrochelatase.

Ferrochelatase, the enzyme catalyzing metallation of protoporphyrin IX at the terminal step of heme biosynthesis, was co-crystallized with an isomer mixture of the potent inhibitor N-methylmesoporphyrin (N-MeMP). The X-ray structure revealed the active site of the enzyme, to which only one of the isomers was bound, and for the first time allowed characterization of the mode of porphyrin macrocycle distortion by ferrochelatase. Crystallization of ferrochelatase and N-MeMP in the presence of Cu(2+) leads to metallation and demethylation of N-MeMP. A mechanism of porphyrin distortion is proposed, which assumes that the enzyme holds pyrrole rings B, C and D in a vice-like grip and forces a 36 degrees tilt on ring A.

Crystal structure of Thermotoga maritima ribosome recycling factor: a tRNA mimic.

Ribosome recycling factor (RRF), together with elongation factor G (EF-G), catalyzes recycling of ribosomes after one round of protein synthesis. The crystal structure of RRF was determined at 2.55 angstrom resolution. The protein has an unusual fold where domain I is a long three-helix bundle and domain II is a three-layer beta/alpha/beta sandwich. The molecule superimposes almost perfectly with a transfer RNA (tRNA) except that the amino acid-binding 3' end is missing. The mimicry suggests that RRF interacts with the posttermination ribosomal complex in a similar manner to a tRNA, leading to disassembly of the complex. The structural arrangement of this mimicry is entirely different from that of other cases of less pronounced mimicry of tRNA so far described.

Crystallization and preliminary X-ray analysis of the Rhodobacter capsulatus magnesium chelatase BchI subunit.

The Rhodobacter capsulatus BchI protein is one of three subunits of Mg chelatase, the enzyme which catalyzes the first committed step of chlorophyll and bacteriochlorophyll biosynthesis. The BchI protein was produced with an inducible T7 RNA polymerase expression system in Escherichia coli. The protein was purified from the soluble cell-extract fraction and crystallized from polyethylene glycol solution. The crystals diffract to a minimum Bragg spacing of 2.1 A. The space group is P63 with unit-cell dimensions a = b = 90.6, c = 84.1 A.

Iron superoxide dismutase from the archaeon Sulfolobus solfataricus: analysis of structure and thermostability.

The crystal structure of superoxide dismutase (SOD) from the hyper thermophile Sulfolobus solfataricus has been determined at 2.3 A resolution by molecular replacement and refined to a crystallographic R-factor of 16.8 % (Rfree 19.8 %). The crystals belong to the space group C2 (a=76.3 A, b=124.3 A, c=60.3 A, beta=128.8 degrees) with two identical monomers in the asymmetric unit. The monomer has a molecular weight of 24 kDa and consists of 210 amino acid residues of which 205 are visible in the electron density map. The overall fold of the monomer of S. solfataricus SOD is similar to that of the other known Fe or Mn-SODs. S. solfataricus SOD forms a very compact tetramer of a type similar to that of SOD from the hyperthermophile Aquifex pyrophilus. Both structures show an elevated number of inter-subunit ion-pairs compared with the mesophilic SOD from Mycobacterium tuberculosis and the thermophilic SOD from Thermus thermophilus. However, in contrast to the A. pyrophilus SOD structure, the number of intra-subunit ion-pairs as well as inter- subunit hydrogen bonds is not higher than in the compared mesophilic and thermophilic SOD structures. The electron density also revealed an unexpected and unusual covalent modification of a conserved tyrosine in the active site. Its involvement in the specific activity of the enzyme is discussed.

Crystallization and preliminary X-ray analysis of Thermotoga maritima ribosome recycling factor.

Thermotoga maritima ribosome recycling factor (RRF) is one of the proteins catalyzing the fourth step in prokaryotic protein synthesis, ribosome recycling. The RRF protein was crystallized with ammonium sulfate. Native diffraction data to 2.55 A resolution were obtained at the MAX II synchrotron from a flash-frozen crystal at 100 K. The crystals belong to space group P4(1)2(1)2 or P4(3)2(1)2, with unit-cell parameters a = b = 47, c = 298 A, and probably contain one monomer per asymmetric unit.

Crystal structure of ribosomal protein S8 from Thermus thermophilus reveals a high degree of structural conservation of a specific RNA binding site.

S8 is one of the core ribosomal proteins. It binds to 16 S RNA with high affinity and independently of other ribosomal proteins. It also acts as a translational repressor in Escherichia coli by binding to its own mRNA. The structure of Thermus thermophilus S8 has been determined by the method of multiple isomorphous replacement at 2.9 A resolution and refined to a crystallographic R-factor of 16.2% (Rfree 27.5%). The two domains of the structure have an alpha/beta fold and are connected by a long protruding loop. The two molecules in the asymmetric unit of the crystal interact through an extensive hydrophobic core and form a tightly associated dimer, while symmetry-related molecules form a joint beta-sheet of mixed type. This type of protein-protein interaction could be realized within the ribosomal assembly. A comparison of the structures of T. thermophilus and Bacillus stearothermophilus S8 shows that the interdomain loop is eight residues longer in the former and reveals high structural conservation of an extensive region, located in the C-terminal domain. From mutational studies this region was proposed earlier to be involved in specific interaction with RNA. On the basis of these data and on the comparison of the two structures of S8, it is proposed that the three-dimensional structure of specific RNA binding sites in ribosomal proteins is highly conserved among different species.

A mutant form of the ribosomal protein L1 reveals conformational flexibility.

The crystal structure of the mutant S179C of the ribosomal protein L1 from Thermus thermophilus has been determined at 1.9 A resolution. The mutant molecule displays a small but significant opening of the cavity between the two domains. The domain movement seems to be facilitated by the flexibility of at least two conserved glycines. These glycines may be necessary for the larger conformational change needed for an induced fit mechanism upon binding RNA. The domain movement makes a disulfide bridge possible between the incorporated cysteines in two monomers of the mutant L1.

Crystal structure of ferrochelatase: the terminal enzyme in heme biosynthesis.

BACKGROUND: The metallation of closed ring tetrapyrroles resulting in the formation of hemes, chlorophylls and vitamin B12 is catalyzed by specific enzymes called chelatases. Ferrochelatase catalyzes the terminal step in heme biosynthesis by inserting ferrous ion into protoporphyrin IX by a mechanism that is poorly understood. Mutations in the human gene for ferrochelatase can result in the disease erythropoietic protoporphyria, and a further understanding of the mechanism of this enzyme is therefore of clinical interest. No three-dimensional structure of a tetrapyrrole metallation enzyme has been available until now. RESULTS: The three-dimensional structure of Bacillus subtilis ferrochelatase has been determined at 1.9 A resolution by the method of multiple isomorphous replacement. The structural model contains 308 of the 310 amino acid residues of the protein and 198 solvent molecules. The polypeptide is folded into two similar domains each with a four-stranded parallel beta sheet flanked by alpha helices. Structural elements from both domains build up a cleft, which contains several amino acid residues that are invariant in ferrochelatases from different organisms. In crystals soaked with gold and cadmium salt solutions, the metal ion was found to be coordinated to the conserved residue His 183, which is located in the cleft. This histidine residue has previously been suggested to be involved in ferrous ion binding. CONCLUSIONS: Ferrochelatase seems to have a structurally conserved core region that is common to the enzyme from bacteria, plants and mammals. We propose that porphyrin binds in the identified cleft; this cleft also includes the metal-binding site of the enzyme. It is likely that the structure of the cleft region will have different conformations upon substrate binding and release.

The structure of elongation factor G in complex with GDP: conformational flexibility and nucleotide exchange.

BACKGROUND: Elongation factor G (EF-G) catalyzes the translocation step of translation. During translocation EF-G passes through four main conformational states: the GDP complex, the nucleotide-free state, the GTP complex, and the GTPase conformation. The first two of these conformations have been previously investigated by crystallographic methods. RESULTS: The structure of EF-G-GDP has been refined at 2.4 A resolution. Comparison with the nucleotide-free structure reveals that, upon GDP release, the phosphate-binding loop (P-loop) adopts a closed conformation. This affects the position of helix CG, the switch II loop and domains II, IV and V. Asp83 has a conformation similar to the conformation of the corresponding residue in the EF-Tu/EF-Ts complex. The magnesium ion is absent in EF-G-GDP. CONCLUSIONS: The results illustrate that conformational changes in the P-loop can be transmitted to other parts of the structure. A comparison of the structures of EF-G and EF-Tu suggests that EF-G, like EF-Tu, undergoes a transition with domain rearrangements. The conformation of EF-G-GDP around the nucleotide-binding site may be related to the mechanism of nucleotide exchange.

Crystal structure of the RNA binding ribosomal protein L1 from Thermus thermophilus.

L1 has a dual function as a ribosomal protein binding rRNA and as a translational repressor binding mRNA. The crystal structure of L1 from Thermus thermophilus has been determined at 1.85 angstroms resolution. The protein is composed of two domains with the N- and C-termini in domain I. The eight N-terminal residues are very flexible, as the quality of electron density map shows. Proteolysis experiments have shown that the N-terminal tail is accessible and important for 23S rRNA binding. Most of the conserved amino acids are situated at the interface between the two domains. They probably form the specific RNA binding site of L1. Limited non-covalent contacts between the domains indicate an unstable domain interaction in the present conformation. Domain flexibility and RNA binding by induced fit seems plausible.

Purification, crystallization, and preliminary X-ray analysis of Bacillus subtilis ferrochelatase.

Bacillus subtilis ferrochelatase (EC 4.99.1.1), the final enzyme in protoheme IX biosynthesis, was produced with an inducible T7 RNA polymerase expression system in Escherichia coli and purified from the soluble cell fraction. It was crystallized from polyethylene glycol solution using the microseeding technique. The crystals diffract to a minimum Bragg spacing of 2.1 A. The space group is P4(2) with unit cell dimensions a = b = 50.2 A, c = 120.1 A.

Crystallographic studies of elongation factor G.

The elongation factors G (EF-G) and Tu (EF-Tu) go through a number of conformation states in their functional cycles. Since they both are GTPases, have similar G domains and domains II, and have similar interactions with the nucleotides, then GTP hydrolysis must occur in similar ways. The crystal structures of two conformational states are known for EF-G and three are known for EF-Tu. The conformations of EF-G.GDP and EF-Tu.GTP are closely related. EF-Tu goes through a large conformational change upon GTP cleavage. This conformational change is to a large extent due to an altered interaction between the G domain and domains II and III. A number of kirromycin-resistant mutations are situated at the interface between domains I and III. The interface between the G domain and domain V in EF-G corresponds with this dynamic interface in EF-Tu. The contact area in EF-G is small and dominated by interactions between charged amino acids, which are part of a system that is observed to undergo conformational changes. Furthermore, a number of fusidic acid resistant mutants have been identified in this area. All of this evidence makes it likely that EF-G undergoes a large conformational change in its functional cycle. If the structures and conformational states of the elongation factors are related to a scheme in which the ribosome oscillates between two conformations, the pretranslocational and posttranslocational states, a model is arrived at in which EF-Tu drives the reaction in one direction and EF-G in the opposite. This may lead to the consequence that the GTP state of one factor is similar to the GDP state of the other. At the GTP hydrolysis state, the structures of the factors will be close to superimposable.

Refined structure of Cu-substituted alcohol dehydrogenase at 2.1 A resolution.

Liver alcohol dehydrogenase (LADH) is a Zn(II)-dependent dimeric enzyme. LADH with the active-site Zn(II) substituted by Cu(II) resembles blue (type I) copper proteins by its spectroscopic characteristics. In this work we present the X-ray structure of the active site Cu(II)-substituted LADH complex with NADH and dimethyl sulfoxide (DMSO). The structure was solved by molecular replacement. The space group is P2(1) with cell dimensions a = 44.4, b = 180.6, c = 50.8 A and beta = 108 degrees. There is one dimer of the enzyme in the asymmetric unit. The refinement was carried out to a crystallographic R-factor of 16.1% for 41 119 unique reflections in the resolution range 12.0 to 2.1 A. The coordination geometry of Cu(II) in LADH is compared with the active-site metal coordination in the Zn-LADH-NADH-DMSO complex and blue-copper proteins. The distances from the metal to the protein ligands (Cys46, His67 and Cys174) are similar for the Zn(II) and Cu(II) ions. The distances of the O atom of the inhibitor DMSO to the Cu(II) ion in the two subunits of the dimer are 3.19 and 3.45 A. These are considerably longer than the corresponding distances for the Zn(II) enzyme, 2.19 and 2.15 A. The Cu(II) ion is positioned nearly in the plane of the three protein ligands (NS(2)) with a geometry similar to the trigonal arrangement of the three strongly bound ligands (N(2)S) in blue-copper proteins. This coordination probably accounts for the similarity of the spectral characteristics of Cu(II)-LADH and type I copper proteins.