Flow-injection spectrophotometric determination of certain cephalosporins based on the formation of dyes.

A flow-injection spectrophotometric method is described for the determination of cefadroxil (I) and cefotaxime (II). The method is based on the hydrolysis of the cephalosporin with sodium hydroxide whereby the sulfide ion is produced. The latter is allowed to react with N,N-diethyl-p-phenylenediamine sulfate (N,N-DPPD) and Fe (III), and the blue color produced is measured at 670 nm (method A). Linear calibration graphs are obtained in the range 36.34-109.2 and 95.48-477.4 microgml(-1) for I and II, respectively. The experimental limits of detection (three times the noise signal) are 0.036 and 0.048 microgml(-1) for I and II, respectively. The total flow-rate is 5.3 ml min(-1) for both drugs. Alternately, the sulfide ion produced is allowed to react with p-phenylenediamine dihydrochloride (PPDD) and Fe (III), and the violet color produced is measured at 597 nm (method B). Linear calibration graphs are obtained in the range 0.5-400 and 0.5-450 microg ml(-1) for I and II, respectively. The limits of detection are 0.4 and 0.2 microg ml(-1) for I and II, respectively. The total flow-rate is 3 ml min(-1) for both drugs. The methods have been successfully applied to the analysis of some pharmaceutical formulations, particularly of the injection and capsule types. The relative standard deviation (RSD) (n = 10) at the 50 and 100 microg ml(-1) levels of I and II were 0.83-0.77 and 0.9-0.8% with N,N-DPPD and PPDD as reagents, respectively. Recoveries were quantitative; the results obtained agreed with those obtained by other reported methods.

Chemiluminescence determination of some fluoroquinolone derivatives in pharmaceutical formulations and biological fluids using [Ru(bipy)(3)(2+)]-Ce(IV) system.

A new chemiluminescence (CL) method using flow injection has been described for the rapid and sensitive determination of three fluoroquinolone derivatives, namely ofloxacin, norfloxacin and ciprofloxacin hydrochloride. The method is based on the CL reaction of the studied fluoroquinolones with tris(2,2'-bipyridyl)ruthenium(II) [Ru(bipy)(3)(2+)] and Ce(IV) in sulfuric acid medium. Under the optimum conditions, the CL intensity is proportional to the concentration of the drugs in solution over the range 0.05-7.0 mug ml(-1) for norfloxacin, 0.05-6.0 mug ml(-1) for ciprofloxacin hydrochloride and 0.003-0.7 mug ml(-1) for ofloxacin. The limits of detection (s/n=3) were 3.1x10(-8) M norfloxacin, 2.6x10(-8) M ciprofloxacin hydrochloride and 5.5x10(-9) M ofloxacin. The method was applied successfully to the determination of these compounds in dosage forms and biological fluids.

Flow-injection chemiluminometric determination of some thioxanthene derivatives in pharmaceutical formulations and biological fluids using the [Ru(dipy)3(2+)]-Ce(IV) system.

A flow-injection (FI) methodology using tris(2,2'-dipyridyl)ruthenium(II), [Ru(dipy)3(2+)], chemiluminescence (CL) was developed for the rapid and sensitive determination of three thioxanthene derivatives, namely zuclopenthixol hydrochloride, flupentixol hydrochloride and thiothixene. The method is based on the CL reaction of the studied thioxanthenes with [Ru(dipy)3(2+)] and Ce(IV) in a sulfuric acid medium. Under the optimum conditions, calibration graphs were obtained over the concentration ranges 0.002-6 migrograms/ml for zuclopenthixol hydrochloride, 0.5-15 micrograms/ml for flupentixol hydrochloride and 0.05-7.5 micrograms/ml for thiothixene. The limits of detection (s/n = 3) were 4.2 x 10(-9) mol/l zuclopenthixol hydrochloride, 2 x 10(-8) mol/l flupentixol hydrochloride and 4.5 x 10(-8) mol/l thiothixene. The method was successfully applied to the determination of these compounds in dosage forms and biological fluids.

Determination of phenolic sympathomimetic drugs in pharmaceutical samples and biological fluids by flow-injection chemiluminescence.

A rapid and highly sensitive flow-injection chemiluminometric method was developed for determination of 3 sympathomimetic drugs, namely, etilefrine hydrochloride, isoxsuprine hydrochloride, and prenalterol hydrochloride. The method is based on chemiluminescence induced by oxidation of drugs with acidified potassium permanganate in the presence of formic acid as a carrier. The calibration graphs were linear over the concentration ranges 0.2-9, 0.2-12.5, and 0.025-1.25 microg/mL for the 3 compounds, respectively. The method was applied successfully in determining the drugs in dosage forms and in biological fluids. A proposal for the reaction pathway is suggested.