Using marine mussels to assess the potential ecotoxicological effects of two different commercial microplastics.

Microplastics (MPs) in the aquatic environment pose a serious threat to biota, by being confounded with food. These effects occur in mussels which are filter-feeding organisms. Mussels from the genus Mytilus sp. were used to evaluate the ecotoxicological effects of two MPs, polypropylene (PP) and polyethylene terephthalate (PET), after 4 and 28-days. Measured individual endpoints were condition index and feeding rate; and sub-individual parameters, metabolism of phase I (CYP1A1, CYP1A2 and CYP3A4) and II (glutathione S-transferases - GSTs), and antioxidant defense (catalase - CAT). MPs decreased both condition index (CI) and feeding rate (FR). No alterations occurred in metabolic enzymes, suggesting that these MPs are not metabolized by these pathways. Furthermore, lack of alterations in GSTs and CAT activities suggests the absence of conjugation and oxidative stress. Overall, biochemical markers were not responsive, but non-enzymatic responses showed deleterious effects caused by these MPs, which may be of high ecological importance.

Effects of microplastics on key reproductive and biochemical endpoints of the freshwater microcrustacean Daphnia magna.

Human activities have directly impacted the environment, causing significant ecological imbalances. From the different contaminants resulting from human activities, plastics are of major environmental concern. Due to their high use and consequent discharge, plastics tend to accumulate in aquatic environments. There, plastics can form smaller particles (microplastics, MPs), due to fragmentation and weathering, which are more prone to interact with aquatic organisms and cause deleterious effects, including at the basis of different food webs. This study assessed the effects of two microplastics (polyethylene terephthalate, PET; and polypropylene, PP; both of common domestic use) in the freshwater cladoceran species Daphnia magna. Toxic effects were assessed by measuring reproductive traits (first brood and total number of offspring), and activities of biomarkers involved in xenobiotic metabolism (phase I: cytochrome P-450 isoenzymes CYP1A1, 1A2 and 3A4; phase II/conjugation: glutathione S-transferases; and antioxidant defense (catalase)). Both MPs showed a potential to significantly reduce reproductive parameters in D. magna. Furthermore, PET caused a significant increase in some isoenzymes of CYP450 in acutely exposed organisms, but this effect was not observed in chronically exposed animals. Similarly, the activity of the antioxidant defense (CAT) was significantly increased in acutely exposed animals, but not in chronically exposed organisms. This pattern of effects suggests a possible mechanism of long-term adaptation to the presence of the tested MPs. In conclusion, the herein tested MPs have shown the potential to induce deleterious effects on D. magna mainly observed in terms of the reproductive outcomes. Changes at the biochemical level seems transient and are not likely to occur in long term, environmentally exposed crustaceans.

What are the global patterns of microplastic ingestion by fish? A scientometric review.

The billions of tons of plastic released into the environment mostly fragment into smaller particles that reach rivers and oceans, posing toxicity risks to aquatic organisms. As fish serve as excellent environmental indicator organisms, this study aims to comprehensively review and quantify published data regarding the abundance of microplastics (MPs) ingested by fish through scientometric analysis. Systematic analysis reveals that global aquatic ecosystems are contaminated by MPs, with the characteristics of these contaminants stemming from inadequate disposal management practices. The abundance of MPs was recorded in several fish species, notably Cyprinus carpio in natural environments and Danio rerio in controlled environments. According to the surveyed studies, laboratory experiments do not accurately represent the conditions found in natural environments. The results suggest that, in natural environments, the predominant colors of MPs are blue, black, and red. Fibers emerged as the most prevalent type, with polyethylene (PE) and polypropylene (PP) being the most frequently identified chemical compositions. On the other hand, laboratory studies showed that the spheres and fragments ingested were predominantly polystyrene (PS) green, followed by the colors blue and red. This discrepancy complicates drawing accurate conclusions regarding the actual effects of plastic particles on aquatic biota. Given the enduring presence of plastic in the environment, it is imperative to consider and implement environmental monitoring for effective, long-term management.

Volatile Organic Compounds from Offspring of Stingless Bee Sacrificed in Hygienic Behavior Test.

This study shows the profile of volatile organic compounds (VOCs) from pupae and larvae of Melipona quadrifasciata anthidioides Lepeletier subjected to three death induction techniques for hygienic behavior (HB) studies: freezing in liquid nitrogen (LN2), freezing in a freezer (FRZ) and piercing of offspring with an entomological pin (PIN). The VOCs from larvae and pupae were obtained through headspace solid-phase microextraction and characterized using gas chromatography coupled to mass spectrometry. In addition, an HB test was performed on the colonies. The main classes of VOCs were hydrocarbons, terpenes and alcohols. Multivariate analysis was applied and showed that there was a separation in the compound profiles between the different treatments. The HB test in the colonies showed that 24 hours after the application of the techniques, the bees removed more dead larvae in LN2 treatment (83.5 %), while after 48 hours more larvae were removed in the LN2 and FRZ treatments (92.3 %). When compared to pupae removal, larvae removal was significantly faster in LN2.

Understanding Interface Exchanges for Assessing Environmental Sorption of Additives from Microplastics: Current Knowledge and Perspectives.

Although the impacts of plastic pollution have long been recognized, the presence, pervasiveness, and ecotoxicological consequences of microplastic-i.e., plastic particles < 5 mm-contamination have only been explored over the last decade. Far less focus has been attributed to the role of these materials and, particularly, microplastics, as vectors for a multitude of chemicals, including those (un)intentionally added to plastic products, but also organic pollutants already present in the environment. Owing to the ubiquitous presence of microplastics in all environmental matrices and to the diverse nature of their chemical and physical characteristics, thoroughly understanding the mechanistic uptake/release of these compounds is inherently complex, but necessary in order to better assess the potential impacts of both microplastics and associated chemicals on the environment. Herein, we delve into the known processes and factors affecting these mechanisms. We center the discussion on microplastics and discuss some of the most prominent ecological implications of the sorption of this multitude of chemicals. Moreover, the key limitations of the currently available literature are described and a prospective outlook for the future research on the topic is presented.

Volatile Organic Compounds from Cassava Plants Confer Resistance to the Whitefly Aleurothrixus aepim (Goeldi, 1886).

Cassava is an essential tuber crop used to produce food, feed, and beverages. Whitefly pests, including Aleurothrixus aepim (Goeldi, 1886) (Hemiptera: Aleyrodidae), significantly affect cassava-based agroecosystems. Plant odours have been described as potential pest management tools, and the cassava clone M Ecuador 72 has been used by breeders as an essential source of resistance. In this study, we analysed and compared the volatile compounds released by this resistant clone and a susceptible genotype, BRS Jari. Constitutive odours were collected from young plants and analysed using gas chromatography-mass spectrometry combined with chemometric tools. The resistant genotype released numerous compounds with previously described biological activity and substantial amounts of the monoterpene (E)-ß-ocimene. Whiteflies showed non-preferential behaviour when exposed to volatiles from the resistant genotype but not the susceptible genotype. Furthermore, pure ocimene caused non-preferential behaviour in whiteflies, indicating a role for this compound in repellence. This report provides an example of the intraspecific variation in odour emissions from cassava plants alongside information on odorants that repel whiteflies; these data can be used to devise whitefly management strategies. A better understanding of the genetic variability in cassava odour constituents and emissions under field conditions may accelerate the development of more resistant cassava varieties.

Semi-Blind Receivers for Two-Hop MIMO Relay Systems with a Combined TSTF-MSMKron Coding.

Due to the increase in the number of mobile stations in recent years, cooperative relaying systems have emerged as a promising technique for improving the quality of fifth-generation (5G) wireless networks with an extension of the coverage area. In this paper, we propose a two-hop orthogonal frequency division multiplexing and code-division multiple-access (OFDM-CDMA) multiple-input multiple-output (MIMO) relay system, which combines, both at the source and relay nodes, a tensor space-time-frequency (TSTF) coding with a multiple symbol matrices Kronecker product (MSMKron), called TSTF-MSMKron coding, aiming to increase the diversity gain. It is first established that the signals received at the relay and the destination satisfy generalized Tucker models whose core tensors are the coding tensors. Assuming the coding tensors are known at both nodes, tensor models are exploited to derive two semi-blind receivers, composed of two steps, to jointly estimate symbol matrices and individual channels. Necessary conditions for parameter identifiability with each receiver are established. Extensive Monte Carlo simulation results are provided to show the impact of design parameters on the symbol error rate (SER) performance, using the zero-forcing (ZF) receiver. Next, Monte Carlo simulations illustrate the effectiveness of the proposed TSTF-MSMKron coding and semi-blind receivers, highlighting the benefit of exploiting the new coding to increase the diversity gain.

Threats to sustainability in face of post-pandemic scenarios and the war in Ukraine.

As the World slowly emerged from the then-ongoing pandemic, War broke out in Europe with the invasion of Ukraine by Russia. The enduring military conflict in Ukraine has had sweeping consequences at the human, social, economic, and environmental levels, not only for the nations involved but across Europe and globally. Damaged infrastructures, severe disruption of economic activity, and forced migration have led to negative impacts on sustainability. The COVID-19 pandemic has added another layer of complexity to this already challenging situation, as the virus has further disrupted economic activity and strained healthcare systems. Herein, we examine how the intersection of war and COVID-19 affect the United Nations' 2030 Agenda for Sustainable Development. How these intersecting challenges have impacted efforts to build a more sustainable future, and how these impacts have a global reach are also assessed. The broader implications of this case for understanding the linkages between conflict, pandemics, and sustainability more generally are also considered, relating these with the United Nations' Sustainable Development Goals (SDG) Agenda for 2030.

The Stability and Properties of Polystyrene/Kaolinite Nanocomposites during Synthesis via Emulsion Polymerization.

The aim of this work was to study the stability and morphological properties of polystyrene latex containing kaolinite as a filler during the process of synthesis of nanocomposites viaemulsion polymerization. Nanocomposites with 1, 3, and 5 wt% of kaolinite were prepared. Latexes with 1 to 3 wt% of kaolinite were stable during the polymerization reaction. Hydrodynamic diameters of 93.68 and 82.11 nm were found for latexes with 1 and 3 wt% of kaolinite, respectively. The quantities of 1 to 3 wt% of kaolinite added during the reaction did not influence the reaction conversion curves or the number of particles. X-ray diffraction (XRD) and unconventional techniques of scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM) showed the presence of exfoliated and intercalated structures of the kaolinite.

Draft Genome Sequence of Zalerion maritima ATCC 34329, a (Micro)Plastic-Degrading Marine Fungus.

Zalerion maritima is a marine fungus that has been studied for the biodegradation of (micro)plastics. Here, we report the draft genome sequence of strain ATCC 34329, which was shown to have a size of 58.4 Mb, a GC content of 44.39%, and 10,802 predicted genes.

Classification of medicines and materials in hospital inventory management: a multi-criteria analysis.

BACKGROUND: In the hospital environment, to achieve an optimum level of operations and service, it is necessary to develop adequate inventory management system. Stocks can be managed, amongst other ways, through inputs classification, which is generally carried out based on a single criterion, such as monetary value, demand or criticality, which does not fully address the complexity of a hospital's inventory management system. Thus, the present study proposes a multi-criteria decision support model to help classify the stock of medicines and materials, enabling a more effective inventory management system for hospitals. METHODS: Methodologically, the study followed 3 stages: (1) preliminary phase; (2) modelling and choice phase; and (3) finalization phase. Each stage had a set of specific steps that were followed. The first stage identified the actors of the process, objectives, criteria and alternatives, establishing 5 criteria and 48 alternatives; the second stage was the choice and execution of the multi-criteria decision method to solve the problem. It was decided to use the Flexible and Interactive Tradeoff method for the sorting problematic. Finally, in the third stage, the sensitivity analysis for the developed model and the validation of the results with decision makers were carried out. In the study, 48 medicines and materials were included to validate the proposed model; however, the model could be used for more items. RESULTS: From the total of 48 medicines and hospital medical materials selected for the study, the classification of 34 of these alternatives to a single class was obtained through modelling and the other 14 alternatives were destined to two possible classes; moreover, the sensitivity analysis performed showed robust results. The items classified in class W should receive special attention by the stock manager; therefore, they should be monitored weekly. Items classified in class B should be monitored biweekly and finally, items classified in class M, should be monitored monthly. CONCLUSIONS: The classification of medicines and materials developed according to the inventory demands allowed more efficient purchasing decisions, optimizing the stock of materials and medicines at the hospital while optimizing the inventory manager's activities, saving time. Consequently, the proposed model can support the development of other multicriteria models in different hospital scenarios.

Dermal Matrices: Do We Always Know What Is Going On?

The use of dermal matrices in abdominal wall reconstruction has gained increased attention over time, particularly in contaminated fields. One of their advantages is the greater capacity to resist infection. We report a case of a 36-year-old man, with congenital bladder exstrophy and neobladder reconstruction during childhood. He presented to us with an abdominal hernia associated with a vesicocutaneous fistula. We used a bovine-derived dermal matrix (SurgiMend®, TEI Biosciences, MA, USA) for reinforcement of the abdominal repair considering its laboratory-proven mechanical superiority regarding strength. The early postoperative period was complicated by an infection that led to mesh disintegration and the need for surgical revision. We believe that matrix digestion by bacterial enzymes culminated in rapid breakdown of the product. Further investigations are warranted to determine optimal selection criteria and indications of bioprosthesis in contaminated wounds. Surgeons should be cautious when selecting a biologic mesh in these cases, favoring meshes with a better integration profile.

Super Digit: More Than a Complicated Syndactyly.

Super digits are a rare hand malformation, first described by Virchel Wood. Surgical intervention to try to make two fingers out of a super digit has been discouraged. Here, we present a variant of a super digit type IC2 and propose a revision of the characteristics in each super digit subtype. In our view, this adjustment in Wood's original description could facilitate the identification of super digits, which are a contraindication to syndactyly release.

Microplastics in Internal Tissues of Companion Animals from Urban Environments.

Companion animals living in urban areas are exposed to environmental contaminants, which may include microplastics. A preliminary study was conducted by collecting postmortem samples from the internal tissue (lungs, ileum, liver, kidney, and blood clots) of 25 dogs (Canis familiaris) and 24 cats (Felis catus) living in an urban environment in Porto metropolitan area, Portugal. Suspected microplastics were found in 80 samples from 35 animals (18 cats and 17 dogs), often occurring in more than one tissue of the same animal (71.4%), primarily under small sizes (50.3% as 1-10 µm). Micro-Raman spectroscopy confirmed a fraction of particles as common polymer types (e.g., polyethylene terephthalate). However, the number of particles was very low. This study highlights the possibilities of the internalization and distribution of microplastics in the internal tissues of terrestrial vertebrates.

Barthel's Index: A Better Predictor for COVID-19 Mortality Than Comorbidities.

BACKGROUND: The most consistently identified mortality determinants for the new coronavirus 2019 (COVID-19) infection are aging, male sex, cardiovascular/respiratory diseases, and cancer. They were determined from heterogeneous cohorts that included patients with different disease severity and previous conditions. The main goal of this study was to determine if activities of daily living (ADL) dependence measured by Barthel's index could be a predictor for COVID-19 mortality. METHODS: A prospective cohort study was performed with a consecutive sample of 340 COVID-19 patients representing patients from all over the northern region of Portugal from October 2020 to March 2021. Mortality risk factors were determined after controlling for demographics, ADL dependence, admission time, comorbidities, clinical manifestations, and delay-time for diagnosis. Central tendency measures were used to analyze continuous variables and absolute numbers (proportions) for categorical variables. For univariable analysis, we used t test, chi-square test, or Fisher exact test as appropriate (α=0.05). Multivariable analysis was performed using logistic regression. IBM SPSS version 27 statistical software was used for data analysis. RESULTS: The cohort included 340 patients (55.3% females) with a mean age of 80.6±11.0 years. The mortality rate was 19.7%. Univariate analysis revealed that aging, ADL dependence, pneumonia, and dementia were associated with mortality and that dyslipidemia and obesity were associated with survival. In multivariable analysis, dyslipidemia (odds ratio [OR], 0.35; 95% confidence interval [CI], 0.17-0.71) was independently associated with survival. Age ≥86 years (pooled OR, 2.239; 95% CI, 1.100-4.559), pneumonia (pooled OR, 3.00; 95% CI, 1.362-6.606), and ADL dependence (pooled OR, 6.296; 95% CI, 1.795-22.088) were significantly related to mortality (receiver operating characteristic area under the curve, 82.1%; p<0.001). CONCLUSION: ADL dependence, aging, and pneumonia are three main predictors for COVID-19 mortality in an elderly population.

Experimental Evaluation of Dry Powder Inhalers during Inhalation and Exhalation Using a Model of the Human Respiratory System (xPULM™).

Dry powder inhalers are used by a large number of patients worldwide to treat respiratory diseases. The objective of this work is to experimentally investigate changes in aerosol particle diameter and particle number concentration of pharmaceutical aerosols generated by four dry powder inhalers under realistic inhalation and exhalation conditions. To simulate patients undergoing inhalation therapy, the active respiratory system model (xPULM™) was used. A mechanical upper airway model was developed, manufactured, and introduced as a part of the xPULM™ to represent the human upper respiratory tract with high fidelity. Integration of optical aerosol spectrometry technique into the setup allowed for evaluation of pharmaceutical aerosols. The results show that there is a significant difference (p < 0.05) in mean particle diameter between inhaled and exhaled particles with the majority of the particles depositing in the lung, while particles with the size of (>0.5 µm) are least influenced by deposition mechanisms. The fraction of exhaled particles ranges from 2.13% (HandiHaler®) over 2.94% (BreezHaler®), and 6.22% (Turbohaler®) to 10.24% (Ellipta®). These values are comparable to previously published studies. Furthermore, the mechanical upper airway model increases the resistance of the overall system and acts as a filter for larger particles (>3 µm). In conclusion, the xPULM™ active respiratory system model is a viable option for studying interactions of pharmaceutical aerosols and the respiratory tract regarding applicable deposition mechanisms. The model strives to support the reduction of animal experimentation in aerosol research and provides an alternative to experiments with human subjects.

Different faces of cigarette butts, the most abundant beach litter worldwide.

Cigarette butts (CBs) are non-biodegradable residues of synthetic origin, prevalent on beaches all over the world. The study evaluates discarded CBs on an intensely used urban beach, determining variations in physical and chemical characteristics. CBs collected were observed, classified, and visually separated according to a proposed scale of four levels of degradation to test the potential match between physical and chemical decay. CBs (un-smoked, smoked, and discarded) were used to determine the average length (cm) and mass (g) in order to observe changes in these parameters among the levels. Cigarette butts experience consecutive mass loss during environmental exposure. Scanning electron microscopy (SEM) images were obtained to assess physical changes in fibers due to smoking. FTIR-ATR was used to assess CBs new (un-smoked), smoked, and discarded samples in relation to cellulose acetate decay. The FTIR-ATR spectroscopy of the most visually degraded cigarette butts indicated modifications in the spectra when compared to un-smoked cigarettes.

A straightforward method for microplastic extraction from organic-rich freshwater samples.

The extraction of microplastics from organic-rich freshwater samples is challenging and limited information is available in the literature. This study aims at developing efficient methods for water volume reduction and organic matter removal in freshwater samples, while focusing on the reduction of the economic and environmental costs, maintaining microplastics integrity and avoiding contamination. For the water volume reduction approach, centrifuging freshwater samples (water, sediment, algae, leaves, driftwood, fish tissue) at different speeds (3500, 6000 rpm) and times (5, 10 min) showed that 3500 rpm for 5 min was efficient to settle the mineral and organic material, while preserving the polymers and showing high microplastic recovering rates (93 ± 6%). These recovery rates were significantly higher than the traditional sieving approach (77 ± 22%). The posterior minimal consumption of reagents resulting from the reduction of water volume helped to reduce the economic and environmental costs of the devised methodology, becoming more aligned with green chemistry principles. For biogenic organic matter removal, four digestion solutions were tested on freshwater samples, namely 10% potassium hydroxide, Fenton reagent (30% H2O2 + Fe(II)), 7% and 10% sodium hypochlorite (NaClO), under 3 periods of time (1, 6 and 15 h), at 50 °C. Both 7% and 10% NaClO showed the highest rates of organic matter removal (86 ± 1% and 90 ± 1%, respectively), after 6 h at 50 °C. Exposure of virgin and aged polymers (polyethylene, polypropylene, polystyrene, polyvinyl chloride, nylon, polyethylene terephthalate) to NaClO showed no weight, visual, surface structure, Fourier transform infrared spectra and carbonyl index changes, except for nylon, although not to an extent that affected its identification. This method resulted in high recovery rates of polymers (92 ± 6%). Thus, 7% NaClO at 50 °C for 6 h (or overnight) may be efficiently used for microplastic analysis in organic-rich freshwater samples.

Effects of virgin and weathered polystyrene and polypropylene microplastics on Raphidocelis subcapitata and embryos of Danio rerio under environmental concentrations.

Microplastics are ubiquitous contaminants of freshwater ecosystems. However, few ecotoxicity assays have been conducted on freshwater organisms using environmentally relevant concentrations of virgin and weathered microplastics. This work assessed the adverse effects of virgin and artificially weathered fragments of polystyrene and polypropylene on the microalga Raphidocelis subcapitata (72 h growth inhibition assay) and on embryos of the fish Danio rerio (96 h fish embryo assay) under environmentally relevant concentrations (2000-200,000 MP L-1) and high concentrations (12.5-100 mg L-1). Sizes of microplastics were measured as tens (polystyrene) to hundreds (polypropylene) of micrometers, while aging was assessed by measuring the carbonyl index. In the microalga, the tested high concentrations promoted growth, while environmentally relevant concentration induced either growth inhibition or promotion. In zebrafish embryos, environmentally relevant concentrations decreased body length and heart rates. No relevant effects were observed in organisms exposed to high concentrations for mortality, malformations, hatching rates, and swimming bladder inflation. Virgin microplastics presented slightly higher toxicity but direct comparison was hindered by the lack of a linear dose-response curve. Despite the lack of a clear pattern, adverse effects were often observed in the lowest environmentally relevant concentrations, raising concerns over the impacts of microplastics on freshwater ecosystems.

Suspected microplastics in Atlantic horse mackerel fish (Trachurus trachurus) captured in Portugal.

Microplastics have been found in fish, but most studies have focused on the digestive system without considering additional organs. Herein, the objective was to assess the presence of microplastics in internal organs (gills, guts, kidney, heart) of the Atlantic horse mackerel (Trachurus trachurus) captured of the coast of Portugal (Northeast Atlantic Ocean). Suspected microplastics were present in all organs, with particles of larger size (i.e., equivalent diameter) found in the gut and those of lower size in the heart and its luminal blood. Suspected microplastics of 1-10 µm were the most abundant (65.4%), more likely to translocate, owing to their minute size, but more difficult to properly characterize. These results highlight the need to expand the analytical work on organs and tissues for assessing microplastics in organisms, but also emphasize the actual need for developing analytical methods that allow for an accurate isolation, identification, and characterization of microplastics in biota.