RESUMO
The present cross-over study aimed to evaluate the effect of a visual passive distraction tool, a case for carpule, in the management of fear and anxiety during invasive dental treatment. Children between the ages of 4 and 8 years that need at least two treatments with inferior alveolar nerve block were selected. All the included children received two treatments at different moments: in one treatment, local anesthesia was performed with a visual passive distraction tool, the crocodile case, for carpule (experimental); in the other treatment, local anesthesia was performed without the device (control). An evaluation of the anxiety levels was performed by measuring the heart rate and salivary cortisol levels. Wilcoxon's nonparametric test was used for a data analysis (p < 0.05). The mean heart rate with the visual passive distraction device fell from 81.8 to 78.1, while the control rose from 91.4 to 100 (p < 0.05). The mean salivary cortisol levels with the visual passive distraction device fell from 2.0 to 1.6, while in the control, they rose from 2.1 to 2.4 (p < 0.05). In conclusion, the crocodile case for carpule as a visual passive distraction device contributed positively to the management of fear and anxiety during inferior alveolar nerve block in children.
Assuntos
Ansiedade ao Tratamento Odontológico , Hidrocortisona , Criança , Humanos , Pré-Escolar , Projetos Piloto , Estudos Cross-Over , Ansiedade , Transtornos de AnsiedadeRESUMO
Background: There is a growing search for innovations in dental materials and instruments and, therefore, an increase need to optimize the instruments used in the absolute isolation. The gold standard procedure contributes significantly to the quality of restorative and endodontic procedures. Thus, the aim of the present study was to evaluate the radiopacity of polyethylene terephthalate polymer clamps and compare them to conventional metal clamps. Material and Methods: The polyethylene terephthalate clamp was developed at the University of Uberaba (Patent application #PI0901719-4, Uberaba, MG, Brazil). Five polyethylene terephthalate clamps and five conventional metal clamps were used. The clamps were positioned, next to an aluminum scale, under the same phosphor plate to perform 3 radiographs. The locator cylinder was set perpendicular to the radiographic films at a focal length of 20 cm and set to 60 kVp and 0.06 seconds. After image processing, optical density values were read using DBWin 5.0.4 software. The mean of the 3 readings taken on each clamp was adopted as the radiodensity of the specimen. The differences between the groups were compared using Student's t-test (p<0.05). Results: Polyethylene terephthalate clamps demonstrated significantly lower radiopacity than conventional metal clamps (p<0.05). Conclusions: Polyethylene terephthalate clamps have lower radiopacity when compared to conventional metal clamps. Key words:Rubber Dams, Dentistry, Operative, Endodontics.
RESUMO
Adhesive restorations have increasingly been used in dentistry, and the adhesive system application technique may determine the success of the restorative procedure. The aim of this study was to evaluate the influence of the application technique of two adhesive systems (Clearfil SE Bond and Adper Scotchbond MultiPurpose) on the bond strength and adhesive layer of composite resin restorations. Eight human third molars were selected and prepared with Class I occlusal cavities. The teeth were restored with composite using various application techniques for both adhesives, according to the following groups (n = 10): group 1 (control), systems were applied and adhesive was immediately light activated for 20 seconds without removing excesses; group 2, excess adhesive was removed with a gentle jet of air for 5 seconds; group 3, excess was removed with a dry microbrushtype device; and group 4, a gentle jet of air was applied after the microbrush and then light activation was performed. After this, the teeth were submitted to microtensile testing. For the two systems tested, no statistical differences were observed between groups 1 and 2. Groups 3 and 4 presented higher bond strength values compared with the other studied groups, allowing the conclusion that excess adhesive removal with a dry microbrush could improve bond strength in composite restorations. Predominance of adhesive fracture and thicker adhesive layer were observed via scanning electron microscopy (SEM) in groups 1 and 2. For groups 3 and 4, a mixed failure pattern and thinner adhesive layer were verified. Clinicians should be aware that excess adhesive may negatively affect bond strength, whereas a thin, uniform adhesive layer appears to be favorable.
Assuntos
Resinas Compostas/química , Colagem Dentária , Materiais Dentários/química , Restauração Dentária Permanente , Cimentos de Resina/química , Adesividade , Preparo da Cavidade Dentária/classificação , Restauração Dentária Permanente/classificação , Análise do Estresse Dentário/instrumentação , Humanos , Cura Luminosa de Adesivos Dentários , Teste de Materiais , Microscopia Eletrônica de Varredura , Estresse Mecânico , Propriedades de Superfície , Resistência à TraçãoRESUMO
OBJECTIVES: The aim of this study was to evaluate four methods of Try-in paste removal from a lithium disilicate ceramic surface before cementation and assess the influence on bond strength to a resin luting cement. METHODS: Slices of dentine (1.6mm thick) were sectioned from the crown of human third molars and truncated cone shape cavities were made with diamond burs. IPS e.max Press ceramic blocks were obtained for each cavity, etched with hydrofluoric acid and fixed with temporary paste, except for Group G1, which was cemented according to the manufacturer's instructions. Try-in paste was removed from the experimental groups using different techniques: G2, ultrasonic bath in distilled water (5 min); G3, air/water spray (1 min); G4, etched with phosphoric acid (2 min)+air/water spray (30 s) and G5, etched with phosphoric acid before and after hydrofluoric acid application+air/water spray (30s). The ceramic restorations were cemented with the same procedures as G1. Push-out bond strength testing (MPa) was performed in a universal testing machine with a crosshead speed of 0.5mm/min. RESULTS: One way ANOVA and Tukey's test (P<0.05) were applied: G4(19.21)a, G2(17.09)ab, G1(16.82)ab, G3(16.18)ab and G5(15.9)b. The results showed that all of the experimental groups showed remaining particles of Try-in paste. The bond strength in G4 was statistically higher than in G5. No significant difference was shown in the other groups. There was a predominance of adhesive failures between resin cements and ceramics in G5. CONCLUSION: The techniques used were not totally effective at removing the Try-in paste; however, the presence of remaining material did not influence the bond strength of restorations. The methods of temporary paste removal may affect the bond strength of ceramic restorations.
Assuntos
Colagem Dentária , Cimentos Dentários/química , Porcelana Dentária/química , Condicionamento Ácido do Dente/métodos , Adesividade , Aerossóis , Cimentação/métodos , Análise do Estresse Dentário/instrumentação , Dentina/ultraestrutura , Humanos , Umidade , Ácido Fluorídrico/química , Teste de Materiais , Metacrilatos/química , Microscopia Eletrônica de Varredura , Ácidos Fosfóricos/química , Cimentos de Resina/química , Silanos/química , Estresse Mecânico , Propriedades de Superfície , Temperatura , Fatores de Tempo , Ultrassom , Água/químicaRESUMO
AIM: Indirect restorations are increasingly used in dentistry, and the cementation interface is possibly the most critical region of the work. The objective of the present work was to evaluate the influence of exposure to a culture medium containing S. mutans on the hardness and solubility of four different cementing agents (zinc phosphate, glass ionomer, glass ionomer modified with resin and resin cement). MATERIALS AND METHODS: Test specimens composed of these cements were exposed for 30 days in a culture medium containing S. mutans. After leaching, the test materials were assessed in terms of their solubility (loss of mass) and Knoop (KHN) microhardness. Changes in surface morphology were identified using scanning electron microscopy (SEM). RESULTS: The resin cement showed no significant solubility and its hardness increased following exposure and leaching, while the zinc phosphate cement was the most soluble and its hardness decreased after exposure to the culture medium. SEM analyses identified morphological alterations on the surfaces of the test materials that were compatible with the solubility results. CONCLUSION: It is concluded that resinous cements perform better than water-based cements when exposed to acidic conditions. CLINICAL SIGNIFICANCE: The effects of acids from Streptococcus mutans can interfere with the efficiency and properties of some cements used for fixation of indirect restorations, exposed to the buccal environment.
Assuntos
Cimentos Dentários/química , Streptococcus mutans/fisiologia , Técnicas Bacteriológicas , Resinas Compostas/química , Meios de Cultura , Contaminação de Medicamentos , Cimentos de Ionômeros de Vidro/química , Dureza , Humanos , Concentração de Íons de Hidrogênio , Teste de Materiais , Microscopia Eletrônica de Varredura , Cimentos de Resina/química , Solubilidade , Propriedades de Superfície , Temperatura , Fatores de Tempo , Água/química , Cimento de Fosfato de Zinco/químicaRESUMO
PURPOSE: This study evaluated and compared in vitro the microstructure and mineral composition of permanent and deciduous teeth's dental enamel. METHODS: Sound third molars (n = 12) and second primary molars (n = 12) were selected and randomly assigned to the following groups, according to the analysis method performed (n = 4): Scanning electron microscopy (SEM), X-Ray diffraction (XRD) and Energy dispersive X-ray spectrometer (EDS). Qualitative and quantitative comparisons of the dental enamel were done. The microscopic findings were analyzed statistically by a nonparametric test (Kruskal-Wallis). The measurements of the prisms number and thickness were done in SEM photomicrographs. The relative amounts of calcium (Ca) and phosphorus (P) were determined by EDS investigation. Chemical phases present in both types of teeth were observed by the XRD analysis. RESULTS: The mean thickness measurements observed in the deciduous teeth enamel was 1.14 mm and in the permanent teeth enamel was 2.58 mm. The mean rod head diameter in deciduous teeth was statistically similar to that of permanent teeth enamel, and a slightly decrease from the outer enamel surface to the region next to the enamel-dentine junction was assessed. The numerical density of enamel rods was higher in the deciduous teeth, mainly near EDJ, that showed statistically significant difference. The percentage of Ca and P was higher in the permanent teeth enamel. CONCLUSIONS: The primary enamel structure showed a lower level of Ca and P, thinner thickness and higher numerical density of rods.
Assuntos
Esmalte Dentário/química , Esmalte Dentário/ultraestrutura , Dente/química , Dente/ultraestrutura , Humanos , Microscopia Eletrônica de Varredura , Minerais/análise , Espectrometria por Raios X , Difração de Raios XRESUMO
OBJECTIVE: Restorative procedures of the dentin-pulp complex stimulate damages that, depending on the technique and materials used, may induce pulpal reactions. The purpose of this study was to evaluate immunochemistry, morphologic, and morphometric pulpal alterations of human teeth pulps capped with self-etching or total-etching adhesive systems. METHOD AND MATERIALS: Thirty human third molars were restored with a resin-based composite and adhesive system, either Clearfil (Kuraray; n = 10) or Scotchbond (3M ESPE; n = 10). After 7, 30, or 60 days, the teeth were extracted and longitudinally sectioned. The pulps were removed for histopathologic and immunochemistry evaluation for interferon (IFN)-gamma, tumor necrosis factor (TNF)-alpha, and inducible nitric oxide synthase (iNOS). RESULTS: The density of fibrous connective tissue was significantly higher after 30 days in both groups (P < .001). Congestion, hemorrhage, calcification, and swelling of the odontoblasts were similar in both groups. The total capillary area was significantly higher after 7 and 30 days in both groups. Positive immunoreactions for iNOS were found in 1 case (20%) of the 30-day Scotchbond group. Immunoreactions for IFN-gamma were positive in a few cells in 1 case (20%) of the 7-day Clearfil group. There were no positive immunoreactions for TNF-alpha in any case. CONCLUSION: No inflammatory reactions, necrotic areas, or severe immunoreactions for proinflammatory cytokines were found, suggesting biocompatibility of self-etching or total-etching adhesive systems when placed directly on dentin.