Is the facial bone wall critical to achieving esthetic outcomes in immediate implant placement with immediate restoration? A systematic review.

BACKGROUND: Rehabilitation in the anterior region requires specific conditions for success, such as the presence of papilla, emergence profile, and balance between pink and white esthetic. OBJECTIVES: This systematic review aimed to evaluate the esthetic risk associated with immediate implant placement with immediate restoration in the anterior superior area, where the facial bone plate may be absent or deficient. MATERIAL AND METHODS: The search was done in PubMed, Embase, Cochrane, Lilacs, Scopus, Scielo, and Google Scholar databases. The investigation involved clinical studies and observational studies published between January 2012 and July 2023. Studies were excluded if there was less than 12-month follow-up, no immediate restoration or facial defect, heavy smokers, or systemic disease. The risk of bias was assessed using the ROBINS-I and Modified-Cochrane RoB tools. RESULTS: Twelve studies were included in this systematic review. The thinner the facial plate, the higher the alveolus's risk of gingival recession or shrinkage. There was an increased interproximal recession when the thin phenotype was associated with flap surgery. An increase in pink esthetic score (PES) was reached when immediate implant placement (IIP) and immediate restoration were done. Soft tissue augmentation achieved more gingival-level stability. Regardless of the initial phenotype, an esthetic outcome was delivered. The risk of bias was high in 1 study and moderate in 3 studies. CONCLUSION: It is possible to conclude that esthetic results and increased final PES or patient satisfaction index in IIP treatments associated with immediate restoration could be obtained even in buccal bone wall defects or gingival recession, regardless of their extension.

Randomized Clinical Trial Comparing Insertion Torque and Implant Stability of Two Different Implant Macrogeometries in the Initial Periods of Osseointegration.

Objectives: The present study compared two implants with different macrogeometries placed in healed alveolar sites, evaluating the insertion torque (ITV) and implant stability quotient (ISQ) values at three different periods. Methods: Seventy patients with a total of 100 dental implants were allocated into two groups (n = 50 per group): DuoCone implants (DC group) that included 28 implants in the maxilla and 22 in the mandible, and Maestro implants (MAE group) that included 26 in the maxilla and 24 in the mandible. The ITV was measured during the implant placement, and the ISQ values were measured immediately at implant placement (baseline) and after 30 and 45 days. Results: The mean and standard deviations of the ITV were statistically significant (p < 0.0001), 56.4 ± 6.41 Ncm for the DC group and 29.3 ± 9.65 Ncm for the MAE group. In the DC group, the ISQs ranged between 61.1 ± 3.78 and 69.8 ± 3.86, while the MAE group presented similar values compared with the other group, ranging between 61.9 ± 3.92 and 72.1 ± 2.37. Conclusions: The value of implant insertion torque did not influence the ISQ values measured immediately after implant placement. However, the ITV influenced the ISQ values measured in the two initial periods of osseointegration, with implants installed with lower torques presenting higher ISQ values.

Surgical and Nonsurgical Treatment Protocols for Peri-implantitis: An Overview of Systematic Reviews.

The goal of this overview was to systematically verify the best available literature on surgical and nonsurgical treatments of peri-implantitis to determine evidence-based treatment protocols for peri-implantitis. Three databases (MEDLINE/PubMed, Web of Science, and Cochrane Library/Evidence) were searched by two independent reviewers, including systematic reviews (SRs) that involved randomized controlled trials (RCTs). The search was limited to articles between January 2014 to January 2021 with an English language restriction. In total, 437 articles were initially found, of which only 34 were selected for full-text reading. Nine SRs were included in this study, enrolling 59 different RCTs. Some studies investigated both surgical and nonsurgical techniques, while others focused on only one approach or the other. In total, six of the studies included nonsurgical techniques, and eight included surgical techniques (ie, augmentative, regenerative, and corrective/resective techniques). Nonsurgical interventions appeared to offer some degree of clinical improvements, especially in bleeding on probing levels, but they were not enough to fully treat peri-implantitis. Whereas surgical techniques seemed to be more effective in improving overall clinical parameters, especially probing depth, bleeding on probing, and to some extent, marginal bone level, no specific surgical technique or material (graft or membrane) had a clear advantage over others. Therefore, resective surgical and implantoplasty techniques demonstrated significant improvements in clinical parameters. Although surgical interventions are more indicated to treat peri-implantitis than nonsurgical procedures, the predictability is still a concern due to titanium particles scattered within the local tissue.

Clinical Performance Comparing Titanium and Titanium-Zirconium or Zirconia Dental Implants: A Systematic Review of Randomized Controlled Trials.

OBJECTIVES: This study aimed to compare clinical results between titanium (Ti), zirconia (Zr), or titanium-zirconium (TZ) dental implants and to analyze survival rate (SR), bleeding on probing (BoP), marginal bone loss (MBL), and/or probing depth (PD). DATA SOURCE: Manual and electronic searches were conducted (PubMed and Web of Science) to identify randomized controlled trials that compared the outcomes of at least two implant types (control and test group) within the same study. The focused question was determined according to the PICOT strategy. Seven studies were included out of 202 research studies initially found. The follow-up periods ranged from 12 to 80 months, and the mean age was from 43.3 to 65.8 years old. The SR for Ti, TZ, and Zr implants ranged from 92.6% to 100%, 95.8% to 100%, and 87.5% to 91.25%, respectively; MBL for Ti, TZ, and Zr implants varied from -1.17 mm to -0.125 mm for Ti, -0.6 mm to -0.32 mm for TZ, and -0.25 mm to -1.38 mm for Zr. Studies showed a low incidence of mucositis and peri-implantitis; however, BoP for Zr was 16.43%, Ti ranged between 10% and 20%, and TZ from 10% to 13.8%. PD for Ti ranged from 1.6 mm to 3.05 mm, TZ was 3.12 mm (only one study), and Zr ranged from 2.21 mm to 2.6 mm. CONCLUSION: All three types of implants showed similar tissue behavior. However, the TZ group had better results when compared with Ti and Zr for SR, MBL, and BoP, except for PD. Furthermore, the worst SR was found in the Zr implants group.

Tensile Strength Essay Comparing Three Different Platelet-Rich Fibrin Membranes (L-PRF, A-PRF, and A-PRF+): A Mechanical and Structural In Vitro Evaluation.

Predictable outcomes intended by the application of PRF (platelet-rich fibrin) derivative membranes have created a lack of consideration for their consistency and functional integrity. This study aimed to compare the mechanical properties through tensile strength and analyze the structural organization among the membranes produced by L-PRF (leukocyte platelet-rich fibrin), A-PRF (advanced platelet-rich fibrin), and A-PRF+ (advanced platelet-rich fibrin plus) (original protocols) that varied in centrifugation speed and time. L-PRF (n = 12), A-PRF (n = 19), and A-PRF+ (n = 13) membranes were submitted to a traction test, evaluating the maximum and average traction. For maximum traction, 0.0020, 0.0022, and 0.0010 N·mm−2 were obtained for A-PRF, A-PRF+, and L-PRF, respectively; regarding the average resistance to traction, 0.0012, 0.0015, and 0.006 N·mm−2 were obtained, respectively (A-PRF+ > A-PRF > L-PRF). For all groups studied, significant results were found. In the surface morphology observations through SEM, the L-PRF matrix showed a highly compact surface with thick fibers present within interfibrous areas with the apparent destruction of red blood cells and leukocytes. The A-PRF protocol showed a dense matrix composed of thin and elongated fibers that seemed to follow a preferential and orientated direction in which the platelets were well-adhered. Porosity was also evident with a large diameter of the interfibrous spaces whereas A-PRF+ was the most porous platelet concentrate with the greatest fiber abundance and cell preservation. Thus, this study concluded that A-PRF+ produced membranes with significant and higher maximum traction results, indicating a better viscoelastic strength when stretched by two opposing forces.

Liquid Platelet-Rich Fibrin Coating Implant Surface to Enhance Osseointegration: A Double-Blinded, Randomized Split-Mouth Trial with 1-Year Follow-up.

PURPOSE: The goal of this study was to assess the effect of a liquid platelet-rich fibrin (PRF)-coated implant surface (double acid-etched) on osseointegration, analyzing the stability and the possibility of shortening the rehabilitation period. MATERIALS AND METHODS: Initially, the blood was centrifuged to obtain the liquid PRF (2,000 revolutions per minute [rpm], 10 minutes), dividing a sample to be analyzed by Luminex, and another was applied onto the implant surface. Fifteen patients (30 implants) were divided into two groups (control and liquid PRF). Following the recommendation provided by the manufacturer, within a controlled torque at a maximum of 34 N.mm, the implant was placed. All patients had 1 year of follow-up. RESULTS: Eleven analytes were identified for the sample characterization (IP-10, eotaxin, RANTES, macrophage inflammatory protein 1-beta [MIP-1ß], VEGF, PDGF-BB, bFGF, IFN-γ, interleukin [IL]-5, IL-10, and IL-15). Regarding clinical evaluation, for control and liquid PRF groups, respectively, (1) the mean torque for implant placement was 26.67 and 27.27 N.mm; (2) the initial stability (implant stability quotient [ISQ]) was 64.87 (SD ± 6.01) and 67.36 (SD ± 7.21); (3) the final ISQ was 67.67 (SD ± 6.13) and 70.14 (SD ± 6.40); (4) it took an average 73 and 71 days to reestablish the masticatory function; (5) the survival rate was 93.3% and 86.6%; and (6) the marginal bone loss was up to 1.0 mm after 1 year (control)-for two patients, it was between 1.0 and 2.0 mm, and for another two subjects, it was up to 1 mm (liquid PRF). No statistical significance was observed for all parameters analyzed (P > .05). CONCLUSION: Within the limitations of this study, the results indicated that there was no statistical significance when liquid PRF was applied on the implant surface, for all parameters.

A new design of a multifunctional abutment to morse taper implant connection: Experimental mechanical analysis.

The objective of this study was to evaluate a new design of multifunctional abutment for Morse taper implant connections, relative to the retentive stability after the application of cyclic loads in cemented and screwed crowns. Multifunctional abutments with two different angulations in the seating portion of the crown were tested, forming 2 groups (n = 30 samples per group): Group Abut11, where Smart abutments with an angle of 11.42° were used; Group Abut5, where Ideale abutments with an angle of 5° were used. Fifteen samples from each group received cemented crowns (CC) and another fifteen screwed crowns (SC). All crown samples were subjected to the mechanical cycling test at 360,000 cycles at a frequency of 4 Hz and 150 N of the load. The samples with CC were subjected to the tensile test to remove the crowns, while in the samples with SC, the detorque value of the fastening crown screws was measured. The mean tensile strength value of CC in the Abut11 group was 131.9 ± 13.5 N and, in the Abut5 group was 230.9 ± 11.3 N; while the detorque mean value in samples with SC 5.8 ± 1.8 N for the Abut11 group and, 7.6 ± 1.1 N for Abut5 group. Significant statistical differences were found between the two groups in both situations tested (p < 0.05). The multifunctional abutments, presenting a lesser angulation of the crown-seating portion, showed higher values of retention of the CC and a lesser screw loosening of torque of the fixing screws in the SC after the application of cyclic loads when compared to the abutments with more angulation in the crown-seating portion.

Zirconia Implants and Marginal Bone Loss: A Systematic Review and Meta-Analysis of Clinical Studies.

PURPOSE: The purpose of this study was to provide sufficient information on the clinical outcome of zirconia implants, mainly observing the survival rate and marginal bone loss (MBL), with a minimum follow-up of 12 months, to verify the adoption of ceramics as a rational possibility for dental implants. MATERIALS AND METHODS: A systematic electronic search through the PubMed (MEDLINE) and EMBASE databases was performed by two independent reviewers to identify clinical studies published between January 2005 and April 2019 containing a minimum of 10 patients per study and 12 months of follow-up after functional loading. References from the selected articles were manually reviewed for further studies. RESULTS: From the initial 1,225 articles retrieved, 19 met all the inclusion criteria. The marginal bone remodeling accounted for mean losses of 0.8 mm (95% CI: 0.60 to 1.00 mm) and 1.01 mm (95% CI: 0.72 to 1.29 mm) at 1 year and 2 years postloading, respectively. The failure rate of 6.8% was calculated for a mean follow-up period of 2.75 years, where the prevalence of early failure, late failure, and implant fracture was 3.4%, 1.7%, and 1.7%, respectively. The meta-analysis associated with the survival rate of one- and two-piece zirconia dental implants was hindered due to the lack of confidence interval or standard deviation information in most of the included articles. CONCLUSION: Zirconia implants presented MBL values consistent with the standard in the global consensus, high survival rates, and considerable clinical results at short-term observation periods following prosthetic delivery.