Xylanase treatment of eucalypt kraft pulps: effect of carryover.

The influence of pulp carryover on the efficiency of the xylanase (X) treatment of industrial unbleached and oxygen-delignified eucalypt kraft pulps (A1 and A2 pulps, with kappa number (KN) values of 16 and 10, respectively), collected at the same pulp mill, was studied regarding the consumption of bleaching chemicals and pulp bleachability. Another non-oxygen-delignified eucalyptus kraft pulp of KN 13 was received after the extended cooking from a different pulp mill (pulp B). The assays were performed with both lab-washed (carryover-free) and unwashed (carryover-rich) pulps. Both lab-washed and unwashed pulps with carryover were subjected to X treatment, the former being demonstrating considerably higher ClO2 savings than the pulps containing carryover. The savings of bleaching reagents were higher when the X stage was applied to the A1 pulp than to the A2 pulp. This advantage of A1 pulp, however, was not confirmed when using unwashed pulps. In contrast, the gains obtained from the X treatment of unwashed pulp A2 were practically as high as those observed for the lab-washed A2 pulp. Furthermore, a similar effect in X stage was recorded for unwashed pulps having close KN: oxygen-delignified A2 pulp and non-oxygen-delignified B pulp. The results suggest that pulp carryover and initial pH were the key factors relating to the effectiveness of X treatment. The application of X treatment to the A2 unwashed pulp (after the oxygen stage) not only saved 20% of the ClO2 and 10% of the sodium hydroxide, but also improved the brightness stability of the bleached pulp without affecting its papermaking properties. KEY POINTS: • Xylanase treatment boosts kraft pulp bleaching • Pulp carryover hinders the xylanase treatment • Nearly 20% of ClO2 and 10% NaOH savings can be reached using xylanase.

Green Process for Xylooligosaccharides Production using an Eucalyptus Kraft Pulp.

Xylooligosaccharides (XOS) are oligomers with recognized and important prebiotic properties, whose consumption is associated with several health benefits, including a positive impact on the immune system. In this work, XOS were produced through a green process of enzymatic hydrolysis performed directly on an intermediate product from a pulp and paper industry, Eucalyptus bleached kraft pulp. Focusing on an industrial, sustainable and more economical application, two goals were defined and validated: (i) no pretreatment of the substrate and (ii) the replacement of the commonly used buffer solution as reaction medium for only water. The influence of the most relevant operating conditions on the production of XOS as well as the respective yields obtained were very similar when using either buffer or water as the reaction medium. For the use of water, although the solution pH decreases during the enzymatic reaction, this change did not affect the production of XOS. For the optimized conditions, 80 °C and 100 U/g pulp, a maximum yield of 31.4 ± 2.6% per total xylan in the pulp was obtained, resulting in more than 50 kg of XOS per ton of pulp. The correspondent hydrolysate was mainly composed by xylobiose (66%) and xylotriose (29%), oligomers with the highest prebiotic effect.

Cellulose Nanocrystal Aqueous Colloidal Suspensions: Evidence of Density Inversion at the Isotropic-Liquid Crystal Phase Transition.

The colloidal suspensions of aqueous cellulose nanocrystals (CNCs) are known to form liquid crystalline (LC) systems above certain critical concentrations. From an isotropic phase, tactoid formation, growth, and sedimentation have been determined as the genesis of a high-density cholesteric phase, which, after drying, originates solid iridescent films. Herein, the coexistence of a liquid crystal upper phase and an isotropic bottom phase in CNC aqueous suspensions at the isotropic-nematic phase separation is reported. Furthermore, isotropic spindle-like domains are observed in the low-density LC phase and high-density LC phases are also prepared. The CNCs isolated from the low- and high-density LC phases are found to have similar average lengths, diameters, and surface charges. The existence of an LC low-density phase is explained by the presence of air dissolved in the water present within the CNCs. The air dissolves out when the water solidifies into ice and remains within the CNCs. The self-adjustment of the cellulose chain conformation enables the entrapment of air within the CNCs and CNC buoyancy in aqueous suspensions.