Surface Wettability of a Natural Rubber Composite under Stretching: A Model to Predict Cell Survival.

We report the stress-strain effect of a stretchable natural rubber (NR)-calcium phosphate composite on the surface wettability (SW) using an innovative approach coupling a uniaxial tensile micromachine, goniometer, and microscope. In situ contact angle measurements in real time were performed during mechanical tension. Our results show that SW is guided by the stress-strain relationship with two different characteristics, depending on the static or dynamic experiments. The results evidenced the limits of the classical theory of wetting. Furthermore, based on the mechanically tunable SW of the system associated with the cytocompatibility of the NR composite, we have modeled such a system for application as a cell support. From the experimental surface energy value, our proposed 3D modeling numerical simulation predicted a window of opportunities for cell-NR survival under mechanical stimuli. The presented data and the thermodynamics-based theoretical approach enable not only accurate correlation of SW with mechanical properties of the NR composite but also provide huge potential for future cell supportability in view of tissue engineering.

Towards the production of natural rubber-calcium phosphate hybrid for applications as bioactive coatings.

This paper assesses the morphological, structural and bio-physicochemical stability of natural rubber (NR) Hevea brasiliensis coatings incorporated with microparticles of calcium phosphate-based (CaP) bioactive ceramics. Optical and electronic spectroscopic imaging techniques were employed to successfully evaluate the NR encapsulation capability and the stability of the coating in a biologically relevant media for bio-related application, i.e., simulated body fluid (SBF). The chemical structure of the natural polymer, the microchemical environment at the NR-CaP interface and the morphology of the CaP clusters were fully characterized. Further, the response of the hybrid coating to SBF was evaluated by incubating the samples for 30 days. The hybrid coating formed on Si surface (inert substrate) exhibited both stability and biodegradability in different levels (time dependence), thus opening horizons for applications as coatings for both biomaterials and drug delivery systems.

Effects of negatively and positively charged Ti metal surfaces on ceramic coating adhesion and cell response.

This manuscript reports an evaluation of the effects of simple chemical-heat treatments on the deposition of different ceramic coatings, i.e., TiO2, CaTiO3 and CaP, on commercially pure titanium (cp-Ti) and Ti6Al4V and the influence of the coatings on cells interaction with the surfaces. The ceramic materials were prepared by the sol-gel method and the coating adhesion was analyzed by pull-off bending tests. The wettability of positively or negatively charged surfaces was characterized by contact angle measurements, which also enabled the calculation of the surface free energy through the polar-apolar liquids approach. Both acid and alkaline treatments activated the cp-Ti, whereas Ti6Al4V was only activated by the alkaline treatment. Such treatment led to increased hydrophilicity with inhibition of the fibroblastic response on Ti6Al4V. On the other hand, osteoblastic cells adhered to and proliferated on the positively and negatively charged surfaces. The maximum adhesion strength (~ 3400 N) was obtained with a negative Ti6Al4V-CaTiO3-CaP multilayer surface.

Water Drop Evaporation on Mushroom-like Superhydrophobic Surfaces: Temperature Effects.

We report on experiments of drop evaporation on heated superhydrophobic surfaces decorated with micrometer-sized mushroom-like pillars. We analyze the influence of two parameters on the evaporation dynamics: the solid-liquid fraction and the substrate temperature, ranging between 30 and 80 °C. In the different configurations investigated, the drop evaporation appears to be controlled by the contact line dynamics (pinned or moving). The experimental results show that (i) in the pinned regime, the depinning angles increase with decreasing contact fraction and the substrate heating promotes the contact line depinning and (ii) in the moving regime, the droplet motion is described by periodic stick-slip events and contact-angle oscillations. These features are highly smoothed at the highest temperatures, with two possible mechanisms suggested to explain such a behavior, a reduction in the elasticity of the triple line and a decrease in the depinning energy barriers. For all surfaces, the observed remarkable stability of the "fakir" state to the temperature is attributed to the re-entrant micropillar curvature that prevents surface imbibition.