Characterization of polarity development through 2- and 3-D imaging during the initial phase of microspore embryogenesis in Brassica napus L.

Isolated microspores of B. napus in culture change their developmental pathway from gametophytic to sporophytic and form embryo-like structures (ELS) upon prolonged heat shock treatment (5 days at 32 °C). ELS express polarity during the initial days of endosporic development. In this study, we focussed on the analysis of polarity development of ELS without suspensor. Fluorescence microscopy and 3-D confocal laser scanning microscopy (CLSM) without tissue interfering enabled us to get a good insight in the distribution of nuclei, mitochondria and endoplasmic reticulum (ER), the architecture of microtubular (MT) cytoskeleton and the places of 5-bromo-2'-deoxy-uridine (BrdU) incorporation in successive stages of microspore embryogenesis. Scanning electron microscopy (SEM) analysis revealed, for the first time, the appearance of a fibrillar extracellular matrix-like structure (ECM-like structure) in androgenic embryos without suspensor. Two types of endosporic development were distinguished based upon the initial location of the microspore nucleus. The polarity of dividing and growing cells was recognized by the differential distributions of organelles, by the organization of the MT cytoskeleton and by the visualization of DNA synthesis in the cell cycle. The directional location of nuclei, ER, mitochondria and starch grains in relation to the MTs configurations were early polarity indicators. Both exine rupture and ECM-like structure on the outer surfaces of ELS are supposed to stabilize ELS's morphological polarity. As the role of cell polarity during early endosporic microspore embryogenesis in apical-basal cell fate determination remains unclear, microspore culture system provides a powerful in vitro tool for studying the developmental processes that take place during the earliest stages of plant embryogenesis.

Histological examination of horse chestnut infection by Pseudomonas syringae pv. aesculi and non-destructive heat treatment to stop disease progression.

Since its emergence in Northwest Europe as a pathogen that infects trunks and branches of Aesculus spp. (the horse chestnuts) approximately one decade ago, Pseudomonas syringae pv. aesculi has rapidly established itself as major threat to these trees. Infected trees exhibit extensive necrosis of phloem and cambium, which can ultimately lead to dieback. The events after host entry leading to extensive necrosis are not well documented. In this work, the histopathology of this interaction is investigated and heat-treatment is explored as method to eradicate bacteria associated with established infections. The early wound-repair responses of A. hippocastanum, both in absence and presence of P. s. pv. aesculi, included cell wall lignification by a distinct layer of phloem and cortex parenchyma cells. The same cells also deposited suberin lamellae later on, suggesting this layer functions in compartmentalizing healthy from disrupted tissues. However, monitoring bacterial ingress, its construction appeared inadequate to constrain pathogen spread. Microscopic evaluation of bacterial dispersal in situ using immunolabelling and GFP-tagging of P. s. pv. aesculi, revealed two discriminative types of bacterial colonization. The forefront of lesions was found to contain densely packed bacteria, while necrotic areas housed bacterial aggregates with scattered individuals embedded in an extracellular matrix of bacterial origin containing alginate. The endophytic localization and ability of P. s. pv aesculi to create a protective matrix render it poorly accessible for control agents. To circumvent this, a method based on selective bacterial lethality at 39 °C was conceived and successfully tested on A. hippocastanum saplings, providing proof of concept for controlling this disease by heat-treatment. This may be applicable for curing other tree cankers, caused by related phytopathogens.

Gametophytic development of Brassica napus pollen in vitroenables examination of cytoskeleton and nuclear movements.

Isolated microspores and pollen suspension of Brassica napus "Topas" cultured in NLN-13 medium at 18°C follow gametophytic pathway and develop into pollen grains closely resembling pollen formed in planta. This culture system complemented with whole-mount immunocytochemical technology and novel confocal laser scanning optical technique enables detailed studies of male gametophyte including asymmetric division, cytoskeleton, and nuclear movements. Microtubular cytoskeleton configurationally changed in successive stages of pollen development. The most prominent role of microtubules (MTs) was observed just before and during nuclear migration at the early and mid-bi-cellular stage. At the early bi-cellular stage, parallel arrangement of cortical and endoplasmic MTs to the long axis of the generative cell (GC) as well as MTs within GC under the plasmalemma bordering vegetative cell (VC) were responsible for GC lens shape. At the beginning of the GC migration, endoplasmic microtubules (EMTs) of the VC radiated from the nuclear envelope. Most cortical and EMTs of the VC were found near the sporoderm. At the same time, pattern of MTs observed in GC was considerably different. Multiple EMTs of the GC, previously parallel aligned, reorganized, and start to surround GC, forming a basket-like structure. These results suggest that EMTs of GC provoke changes in GC shape, its detachment from the sporoderm, and play an important role in GC migration to the vegetative nucleus (VN). During the process of migration of the GC to the VC, multiple and thick bundles of MTs, radiating from the cytoplasm near GC plasma membrane, arranged perpendicular to the narrow end of the GC and organized into a "comet-tail" form. These GC "tail" MTs became shortened and the generative nucleus (GN) took a ball shape. The dynamic changes of MTs accompanied polarized distribution pattern of mitochondria and endoplasmic reticulum. In order to confirm the role of MTs in pollen development, a "whole-mount" immunodetection technique and confocal laser-scanning microscopy was essential.

Microtubule configurations and nuclear DNA synthesis during initiation of suspensor-bearing embryos from Brassica napus cv. Topas microspores.

In the new Brassica napus microspore culture system, wherein embryos with suspensors are formed, ab initio mimics zygotic embryogenesis. The system provides a powerful in vitro tool for studying the diverse developmental processes that take place during early stages of plant embryogenesis. Here, we studied in this new culture system both the temporal and spatial distribution of nuclear DNA synthesis places and the organization of the microtubular (MT) cytoskeleton, which were visualized with a refined whole mount immunolocalization technology and 3D confocal laser scanning microscopy. A 'mild' heat stress induced microspores to elongate, to rearrange their MT cytoskeleton and to re-enter the cell cycle and perform a predictable sequence of divisions. These events led to the formation of a filamentous suspensor-like structure, of which the distal tip cell gave rise to the embryo proper. Cells of the developing pro-embryo characterized endoplasmic (EMTs) and cortical microtubules (CMTs) in various configurations in the successive stages of the cell cycle. However, the most prominent changes in MT configurations and nuclear DNA replication concerned the first sporophytic division occurring within microspores and the apical cell of the pro-embryo. Microspore embryogenesis was preceded by pre-prophase band formation and DNA synthesis. The apical cell of the pro-embryo exhibited a random organization of CMTs and, in relation to this, isotropic expansion occurred, mimicking the development of the apical cell of the zygotic situation. Moreover, the apical cell entered the S phase shortly before it divided transversally at the stage that the suspensor was 3-8 celled.

Flexibility contra stiffness: the phragmoplast as a physical barrier for beads but not for vesicles.

In plant cells, Golgi vesicles are transported to the division plane to fuse with each other, forming the cell plate, the initial membrane-bordered cell wall separating daughter cells. Vesicles, but not organelles, move through the phragmoplast, which consists of two opposing cylinders of microtubules and actin filaments, interlaced with endoplasmic reticulum membrane. To study physical aspects of this transport/inhibition process, we microinjected fluorescent synthetic 1,2-dioleoyl-sn-glycero-3-phospho-rac-1-glycerol (DOPG) vesicles and polystyrene beads into Tradescantia virginiana stamen hair cells. The phragmoplast was nonselective for DOPG vesicles of a size up to 150 nm in diameter but was a physical barrier for polystyrene beads having a diameter of 20 and 40 nm and also when beads were coated with the same DOPG membrane. We conclude that stiffness is a parameter for vesicle transit through the phragmoplast and discuss that cytoskeleton configurations can physically block such transit.

ps-2, the gene responsible for functional sterility in tomato, due to non-dehiscent anthers, is the result of a mutation in a novel polygalacturonase gene.

The recessive mutation ps-2, which appeared spontaneously in tomato, confers functional male sterility due to non-dehiscent anthers. In this study, we isolated and characterized the PS-2 gene. A single nucleotide mutation in a novel tomato polygalacturonase gene is responsible for the ps-2 phenotype. The mutation in ps-2 is responsible for an alternative splicing during maturation of the pre-mRNA, which leads to an aberrant mRNA. Differentiation between ps-2 and wild type (PS-2) anthers only appears in the final developmental stage in which the stomium remains closed in the mutant. To our knowledge, this is the first functional sterility gene isolated in the Solanaceae family. The specific expression of the Arabidopsis homolog of PS-2 in the anther dehiscence zone suggests a conserved mode of action over the plant kingdom, which means that the repression of PS-2 homologs may be a potential way to introduce functional sterility in other species.

ABA inhibits embryo cell expansion and early cell division events during coffee (Coffea arabica 'Rubi') seed germination.

BACKGROUND AND AIMS: Coffee seed germination represents an interplay between the embryo and the surrounding endosperm. A sequence of events in both parts of the seed determines whether germination will be successful or not. Following previous studies, the aim here was to further characterize the morphology of endosperm degradation and embryo growth with respect to morphology and cell cycle, and the influence of abscisic acid on these processes. METHODS: Growth of cells in a fixed region of the axis was quantified from light micrographs. Cell cycle events were measured by flow cytometry and by immunocytochemistry, using antibodies against beta-tubulin. Aspects of the endosperm were visualized by light and scanning electron microscopy. KEY RESULTS: The embryonic axis cells grew initially by isodiametric expansion. This event coincided with reorientation and increase in abundance of microtubules and with accumulation of beta-tubulin. Radicle protrusion was characterized by a shift from isodiametric expansion to elongation of radicle cells and further accumulation of beta-tubulin. Early cell division events started prior to radicle protrusion. Abscisic acid decreased the abundance of microtubules and inhibited the growth of the embryo cells, the reorganization of the microtubules, DNA replication in the embryonic axis, the formation of a protuberance and the completion of germination. The endosperm cap cells had smaller and thinner cell walls than the rest of the endosperm. Cells in the endosperm cap displayed compression followed by loss of cell integrity and the appearance of a protuberance prior to radicle protrusion. CONCLUSIONS: Coffee seed germination is the result of isodiametric growth of the embryo followed by elongation, at the expense of integrity of endosperm cap cells. The cell cycle, including cell division, is initiated prior to radicle protrusion. ABA inhibits expansion of the embryo, and hence subsequent events, including germination.

AtSERK1 expression precedes and coincides with early somatic embryogenesis in Arabidopsis thaliana.

The Arabidopsis thaliana primordia timing (pt) mutant was transformed with an AtSERK1::GUS construct. Liquid cultures of this line were used to study the relationship between somatic embryogenesis and the expression of SOMATIC EMBRYOGENESIS RECEPTOR-LIKE KINASE (AtSERK1) as a marker for cells competent to form embryos. In order to search for the expression of AtSERK1::GUS during early stages of somatic embryogenesis, histochemical as well as immunochemical approaches were used for the detection of beta-glucuronidase (GUS). Four sites of AtSERK1 expression were found in the embryogenic cultures: in embryogenic callus, where primary somatic embryos developed; in the basal parts of primary somatic embryos; in the outer layers of cotyledons of primary somatic embryos where secondary embryos were formed; and in provascular and vascular strands of developing somatic embryos. The in vitro expression of AtSERK1::GUS coincides with embryogenic development up to the heart-shaped stage. Prior to the expression in embryos, AtSERK1 was expressed in single cells and small cell clusters, indicating that AtSERK1 indeed marks embryogenic competence. Its expression in (pro)vascular strands, suggests that embryogenic cells in tissue culture retain at least in part their original identity.

Synthetic lipid (DOPG) vesicles accumulate in the cell plate region but do not fuse.

The cell plate is the new cell wall, with bordering plasma membrane, that is formed between two daughter cells in plants, and it is formed by fusion of vesicles (approximately 60 nm). To start to determine physical properties of cell plate forming vesicles for their transport through the phragmoplast, and fusion with each other, we microinjected fluorescent synthetic lipid vesicles that were made of 1,2-dioleoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (DOPG) into Tradescantia virginiana stamen hair cells. During interphase, the 60-nm wide DOPG vesicles moved inside the cytoplasm comparably to organelles. During cytokinesis, they were transported through the phragmoplast and accumulated in the cell plate region together with the endogenous vesicles, even inside the central cell plate region. Because at this stage microtubules are virtually absent from that region, while actin filaments are present, actin filaments may have a role in the transport of vesicles toward the cell plate. Unlike the endogenous vesicles, the synthetic DOPG vesicles did not fuse with the developing cell plate. Instead, they redistributed into the cytoplasm of the daughter cells upon completion of cytokinesis. Because the redistribution of the vesicles occurs when actin filaments disappear from the phragmoplast, actin filaments may be involved in keeping the vesicles inside the developing cell plate region.

Regeneration of zygotic-like microspore-derived embryos suggests an important role for the suspensor in early embryo patterning.

The inaccessibility of the zygote and proembryos of angiosperms within the surrounding maternal and filial tissues has hampered studies on early plant embryogenesis. Somatic and gametophytic embryo cultures are often used as alternative systems for molecular and biochemical studies on early embryogenesis, but are not widely used in developmental studies due to differences in the early cell division patterns with seed embryos. A new Brassica napus microspore embryo culture system, wherein embryogenesis highly mimics zygotic embryo development, is reported here. In this new system, the donor microspore first divides transversely to form a filamentous structure, from which the distal cell forms the embryo proper, while the lower part resembles the suspensor. In conventional microspore embryogenesis, the microspore divides randomly to form an embryonic mass that after a while establishes a protoderm and subsequently shows delayed histodifferentiation. In contrast, the embryo proper of filament-bearing microspore-derived embryos undergoes the same ordered pattern of cell division and early histodifferentiation as in the zygotic embryo. This observation suggests an important role for the suspensor in early zygotic embryo patterning and histodifferentiation. This is the first in vitro system wherein single differentiated cells in culture can efficiently regenerate embryos that are morphologically comparable to zygotic embryos. The system provides a powerful in vitro tool for studying the diverse developmental processes that take place during the early stages of plant embryogenesis.

Visualisation of microtubules and actin filaments in fixed BY-2 suspension cells using an optimised whole mount immunolabelling protocol.

Excellent visualisation of microtubules and actin filaments was obtained in fixed tobacco BY-2 suspension cells after optimising a protocol for whole mount immunolabelling. The procedure is based on modification of fixation, cell wall digestion, dimethyl sulfoxide (DMSO) treatment, post fixation, and blocking. The most critical aspects of successful preservation and visualization of cytoskeletal elements appeared to be: a two-step fixation with paraformaldehyde and glutaraldehyde before enzymatic cell wall digestion and a post fixation with aldehydes thereafter. The method allows the improved visualization of the organisation of the microtubular and actin filament arrays during the successive stages of cell division and at interphase. Although we present the application of our protocols for cytoskeleton labelling, the excellent results show the potential of using this method for the analysis of various proteins and molecules in plant cells.

Changes in DNA and microtubules during loss and re-establishment of desiccation tolerance in germinating Medicago truncatula seeds.

Desiccation tolerance (DT) in orthodox seeds is acquired during seed development and lost upon imbibition/germination, purportedly upon the resumption of DNA synthesis in the radicle cells. In the present study, flow cytometric analyses and visualization of microtubules (MTs) in radicle cells of seedlings of Medicago truncatula showed that up to a radicle length of 2 mm, there is neither DNA synthesis nor cell division, which were first detected in radicles with a length of 3 mm. However, DT started to be lost well before the resumption of DNA synthesis, when germinating seeds were dried back. By applying an osmotic treatment with polyethylene glycol (PEG) before dehydration, it was possible to re-establish DT in seedlings with a radicle up to 2 mm long. Dehydration of seedlings with a 2 mm radicle, with or without PEG treatment, caused disassembly of MTs and appearance of tubulin granules. Subsequent pre-humidification led to an almost complete disappearance of both MTs and tubulin granules. Upon rehydration, neither MTs nor tubulin granules were detected in radicle cells of untreated seedlings, while PEG-treated seedlings were able to reconstitute the microtubular cytoskeleton and continue their normal development. Dehydration of untreated seedlings also led to an apoptotic-like DNA fragmentation in radicle cells, while in PEG-treated seedlings DNA integrity was maintained. The results showed that for different cellular components, desiccation-tolerant seedlings may apply distinct strategies to survive dehydration, either by avoidance or further repair of the damages.

Regeneration of pea (Pisum sativum L.) by a cyclic organogenic system.

In a five-step procedure, plants were regenerated from meristematic tissue initiated from nodal tissue in four pea cultivars ('Espace', 'Classic', 'Solara', and 'Puget'). In step 1, stem tissue with one node (1-cm size) was subcultured on medium containing thidiazuron. As a result multiple shoots were produced, appearing normal or swollen at their bases. The multiple shoots were subcultured in the same medium, resulting in the formation of a green hyperhydric tissue in the swollen bases of the multiple shoots, which is fully covered with small buds [bud-containing tissue (BCT)]. In step 2, BCT fragments were isolated and subcultured in the same medium and, as a result, they were able to reproduce themselves in a cyclic fashion. In step 3, subculture of BCT on medium supplemented with a combination of gibberelic acid, 6-benzyladenine and alpha-naphthalene acetic acid (NAA), resulted in the formation of shoots, which were rooted in step 4 on medium supplemented with 0.5 mg/l NAA, indole-3-acetic acid (IAA) or indole-3-butyric acid. In step 5, in vitro plants were transferred to the greenhouse for acclimatisation and further development. The four varieties tested were all able to produce meristematic tissue, suggesting that its production is genotype independent.

Ectopic expression of BABY BOOM triggers a conversion from vegetative to embryonic growth.

The molecular mechanisms underlying the initiation and maintenance of the embryonic pathway in plants are largely unknown. To obtain more insight into these processes, we used subtractive hybridization to identify genes that are upregulated during the in vitro induction of embryo development from immature pollen grains of Brassica napus (microspore embryogenesis). One of the genes identified, BABY BOOM (BBM), shows similarity to the AP2/ERF family of transcription factors and is expressed preferentially in developing embryos and seeds. Ectopic expression of BBM in Arabidopsis and Brassica led to the spontaneous formation of somatic embryos and cotyledon-like structures on seedlings. Ectopic BBM expression induced additional pleiotropic phenotypes, including neoplastic growth, hormone-free regeneration of explants, and alterations in leaf and flower morphology. The expression pattern of BBM in developing seeds combined with the BBM overexpression phenotype suggests a role for this gene in promoting cell proliferation and morphogenesis during embryogenesis.

Condensin and cohesin knockouts in Arabidopsis exhibit a titan seed phenotype.

The titan (ttn) mutants of Arabidopsis exhibit striking alterations in chromosome dynamics and cell division during seed development. Endosperm defects include aberrant mitoses and giant polyploid nuclei. Mutant embryos differ in cell size, morphology and viability, depending on the locus involved. Here we demonstrate that three TTN genes encode chromosome scaffold proteins of the condensin (SMC2) and cohesin (SMC1 and SMC3) classes. These proteins have been studied extensively in yeast and animal systems, where they modulate chromosome condensation, chromatid separation, and dosage compensation. Arabidopsis contains single copies of SMC1 and SMC3 cohesins. We used forward genetics to identify duplicate T-DNA insertions in each gene. These mutants (ttn7 and ttn8) have similar titan phenotypes: giant endosperm nuclei and arrested embryos with a few small cells. A single SMC2 knockout (ttn3) was identified and confirmed by molecular complementation. The weak embryo phenotype observed in this mutant may result from expression of a related gene (AtSMC2) with overlapping functions. Further analysis of titan mutants and the SMC gene family in Arabidopsis should provide clues to chromosome mechanics in plants and insights into the regulation of nuclear activity during endosperm development.