An anatomically shaped medial meniscus prosthesis is able to partially restore the contact mechanics of the meniscectomized knee joint.

PURPOSE: The aim of this study was to determine whether a flexible medial meniscus prosthesis is more capable of sharing loads with the direct tibiofemoral cartilage contact than the stiffer first-generation prosthesis. Additionally, the effect of the prosthesis on the tibial pressure distribution after total meniscectomy was investigated. METHODS: In an artificial knee joint, the relative amounts of load transferred through both meniscus prostheses and the direct tibiofemoral contact were assessed with pressure-sensitive sensors. Additionally, six cadaveric knee joints were loaded in a physiological environment. Tibial contact pressures were measured with an intact native meniscus, after total meniscectomy and after implantation of the second-generation meniscus prosthesis. RESULTS: Whereas the first generation of the meniscus prosthesis transferred virtually all the load from femur to tibia, the second-generation prosthesis allowed for load sharing with the direct tibiofemoral contact. No differences in load sharing were found between the native meniscus and the second-generation meniscus prosthesis. The prosthesis decreased peak and mean pressures on the medial tibial cartilage compared to meniscectomy. No significant differences in pressure were found between the native meniscus and the meniscus prosthesis. CONCLUSIONS: The second-generation meniscus prosthesis presented in this study can share loads with the direct tibiofemoral contact, a characteristic that the first-generation prosthesis did not have. The flexible meniscus prosthesis significantly reduces the contact pressures on the medial tibial plateau after total meniscectomy. Although the biomechanical performance of the native meniscus could not be reproduced completely, the meniscus prosthesis may have the potential to relieve post-meniscectomy pain symptoms.

Dutch Guideline on Knee Arthroscopy Part 2: non-meniscus intra-articular knee injury: a multidisciplinary review by the Dutch Orthopaedic Association.

Background and purpose - A guideline committee of medical specialists and a physiotherapist was formed on the initiative of the Dutch Orthopedic Association (NOV) to update the Guideline Arthroscopy of the Knee: Indications and Treatment 2010. This next Guideline was developed between June 2017 and December 2019. In part 1 we focused on the meniscus; this part 2 addresses all other aspects of knee arthroscopy.Methods - The guideline was developed in accordance with the criteria of the AGREE instrument (AGREE II: Appraisal of Guidelines for Research and Evaluation II) with support of a professional methodologist from the Dutch Knowledge Institute of Medical Specialists. The scientific literature was searched and systematically analyzed. Conclusions and recommendations were formulated according to the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) method. Recommendations were developed considering the balance of benefits and harms, the type and quality of evidence, the values and preferences of the people involved, and the costs.

Dutch Guideline on Knee Arthroscopy Part 1, the meniscus: a multidisciplinary review by the Dutch Orthopaedic Association.

Background and purpose - A guideline committee of medical specialists and a physiotherapist was formed on the initiative of the Dutch Orthopedic Association (NOV) to update the guideline Arthroscopy of the Knee: Indications and Treatment 2010. This next guideline was developed between June 2017 and December 2019. In this Part 1 we focus on the meniscus, in Part 2 on all other aspects of knee arthroscopy.Methods - The guideline was developed in accordance with the criteria of the AGREE instrument (AGREE II: Appraisal of Guidelines for Research and Evaluation II) with support of a professional methodologist from the Dutch Knowledge Institute of Medical Specialists. The scientific literature was searched and systematically analyzed. Conclusions and recommendations were formulated according to the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) method. Recommendations were developed considering the balance of benefits and harms, the type and quality of evidence, the values and preferences of the people involved, and the costs.

Intra-articular corticosteroid injections increase the risk of requiring knee arthroplasty.

AIMS: Recent studies have suggested that corticosteroid injections into the knee may harm the joint resulting in cartilage loss and possibly accelerating the progression of osteoarthritis (OA). The aim of this study was to assess whether patients with, or at risk of developing, symptomatic osteoarthritis of the knee who receive intra-articular corticosteroid injections have an increased risk of requiring arthroplasty. METHODS: We used data from the Osteoarthritis Initiative (OAI), a multicentre observational cohort study that followed 4,796 patients with, or at risk of developing, osteoarthritis of the knee on an annual basis with follow-up available up to nine years. Increased risk for symptomatic OA was defined as frequent knee symptoms (pain, aching, or stiffness) without radiological evidence of OA and two or more risk factors, while OA was defined by the presence of both femoral osteophytes and frequent symptoms in one or both knees. Missing data were imputed with multiple imputations using chained equations. Time-dependent propensity score matching was performed to match patients at the time of receving their first injection with controls. The effect of corticosteroid injections on the rate of subsequent (total and partial) knee arthroplasty was estimated using Cox proportional-hazards survival analyses. RESULTS: After removing patients lost to follow-up, 3,822 patients remained in the study. A total of 249 (31.3%) of the 796 patients who received corticosteroid injections, and 152 (5.0%) of the 3,026 who did not, had knee arthroplasty. In the matched cohort, Cox proportional-hazards regression resulted in a hazard ratio of 1.57 (95% confidence interval (CI) 1.37 to 1.81; p < 0.001) and each injection increased the absolute risk of arthroplasty by 9.4% at nine years' follow-up compared with those who did not receive injections. CONCLUSION: Corticosteroid injections seem to be associated with an increased risk of knee arthroplasty in patients with, or at risk of developing, symptomatic OA of the knee. These findings suggest that a conservative approach regarding the treatment of these patients with corticosteroid injections should be recommended. Cite this article: Bone Joint J 2020;102-B(5):586-592.

Meniscus surgery is still widely performed in the treatment of degenerative meniscus tears in The Netherlands.

PURPOSE: Studies have demonstrated rising incidences of meniscus procedures for degenerative meniscus tears in several countries, despite accumulating evidence that questions the efficacy of the treatment. It is not clear if this rise in incidences also applies to the practice of arthroscopic surgery in the Netherlands. The objective of this study was, therefore, to evaluate the number of meniscal surgeries performed in the Netherlands between 2005 and 2014. METHODS: We used registry-based data on meniscal surgeries that originated from Dutch national hospital basic care registrations from 2005 to 2014. Poisson regression models were used to test differences in incidences of meniscus surgeries performed in the Netherlands between 2005 and 2014, and to find out if changes in incidences over this period differed for younger and older patients. RESULTS: The number of meniscus surgeries was highest in patients aged 40-65 years, who accounted for half of the total number of meniscal surgeries. The incidences of meniscus surgeries decreased from 2005 to 2014 (p < 0.001); this decrease was observed in all age groups, although the decrease in incidences was more pronounced for younger patients (aged less than 40 years) compared to middle-aged and older patients (aged 40 years and older) (p < 0.001). CONCLUSIONS: The implementation of a nationwide guideline for arthroscopic procedures for meniscus tears may have contributed to a decrease in incidences of meniscus procedures. Despite accumulating evidence that questions the rationalisation and effectiveness of the treatment, meniscus surgery is still widely performed in the treatment of degenerative meniscus tears in the Netherlands, demonstrating a delay in the dissemination, acceptance, and implementation of clinical evidence in the practice of arthroscopic surgery in the Netherlands. LEVEL OF EVIDENCE: II.

In Vivo Performance of a Novel, Anatomically Shaped, Total Meniscal Prosthesis Made of Polycarbonate Urethane: A 12-Month Evaluation in Goats.

BACKGROUND: Injury or loss of the meniscus generally leads to degenerative osteoarthritic changes in the knee joint. However, the treatment options for symptomatic patients with total meniscectomy are limited. Therefore, we developed a novel, anatomically shaped, total meniscal implant made of polycarbonate urethane. PURPOSE: To evaluate the in vivo performance of this novel total meniscal implant. The assessment particularly focused on the implant's response to long-term physiological loading in a goat model and its chondroprotective capacity in comparison to clinically relevant controls. STUDY DESIGN: Controlled laboratory study. METHODS: Surgery was performed to the stifle joint of 26 female Saanen goats, subdivided into 4 groups: implant, allograft, total meniscectomy, and sham surgery. The sham group's contralateral joints served as nonoperated controls. After 12 months of follow-up, investigators evaluated implant wear, deformation, and the histopathological condition of the synovium and cartilage. RESULTS: Wear of the implant's articulating surfaces was minimal, which was confirmed by the absence of wear particles in the synovial fluid. Implant deformation was limited. However, one implant failed by complete tearing of the posterior horn extension. No differences in cartilage histopathological condition were observed for the implant, allograft, and meniscectomy groups. However, locally, the cartilage scores for these groups were significantly worse than those of the nonoperated controls. CONCLUSION: Whereas this study demonstrated that the novel implant is resistant to wear and that deformation after 12 months of physiological loading is acceptable, reinforcement of the implant horns is necessary to prevent horn failure. Although the implant could not protect the cartilage from developing degenerative changes, the progression of damage was similar in the allograft group. CLINICAL RELEVANCE: This novel polycarbonate urethane implant may have the potential to become an alternative treatment for symptomatic patients with total meniscectomy.

Functional performance 2-9 years after ACL reconstruction: cross-sectional comparison between athletes with bone-patellar tendon-bone, semitendinosus/gracilis and healthy controls.

PURPOSE: The purpose of this cross-sectional study was to provide descriptive data on functional performance in men and women with ACLR, to compare bone-patellar tendon-bone (BPTB) with semitendinosus/gracilis (STG) within the same sex and to compare the ACLR subjects with healthy controls. METHODS: Eligible participants comprised 100 men (43 % BPTB) and 84 women (41 % BPTB) after ACLR, of whom 30 men (STG n = 19; BPTB n = 11) and 18 women (STG n = 12; BPTB n = 6) were untraceable/not willing and 15 men (STG n = 9; BPTB n = 6) and 18 women (STG n = 12; BPTB n = 3) were not able to take part in the measurements because of injury. Besides men BPTB (n = 24), men STG (n = 27), women BPTB (n = 23) and women STG (n = 23), healthy men (n = 22) and women (n = 22) participated. Measurements consisted of questionnaires, isokinetic peak torque and endurance tests, a hop test battery and drop jump including video analysis. RESULTS: Only the occurrence of dynamic knee valgus differed between ACLR and healthy subjects. CONCLUSION: Two to nine years after ACLR, 16 % of athletes could not participate because of a lower extremity injury. In the remaining group, this study showed similar results for males and females with BPTB compared with STG. Also, similar results are found for quantity of movement comparing operated and healthy subjects. For quality of movement, only the occurrence of dynamic knee valgus in landing from a jump is higher in operated subjects compared with healthy controls. This supports the relevance of a focus on quality of movement as part of ACLR rehabilitation programmes and return to sports criteria. LEVEL OF EVIDENCE: III.

Biomaterials in search of a meniscus substitute.

The menisci fulfill key biomechanical functions in the tibiofemoral (knee) joint. Unfortunately meniscal injuries are quite common and most often treated by (partial) meniscectomy. However, some patients experience enduring symptoms, and, more importantly, it leads to an increased risk for symptomatic osteoarthritis. Over the past decades, researchers have put effort in developing a meniscal substitute able to prevent osteoarthritis and treat enduring clinical symptoms. Grossly, two categories of substitutes are observed: First, a resorbable scaffold mimicking biomechanical function which slowly degrades while tissue regeneration and organization is promoted. Second, a non resorbable, permanent implant which mimics the biomechanical function of the native meniscus. Numerous biomaterials with different (material) properties have been used in order to provide such a substitute. Nevertheless, a clinically applicable cartilage protecting material is not yet emerged. In the current review we provide an overview, and discuss, these different materials and extract recommendations regarding material properties for future developmental research.

Medial open wedge high tibial osteotomy: can delayed or nonunion be predicted?

BACKGROUND: The opening wedge approach to high tibial osteotomy (HTO) is perceived to have some advantages relative to the closing wedge approach but it may be associated with delayed and nonunions. Because nonunions evolve over months, it would be advantageous to be able to identify risk factors for and early predictors of nonunion after medial opening wedge HTO. QUESTIONS/PURPOSES: We sought to determine whether (1) preoperatively identifiable patient factors, including tobacco use, body mass index > 30 kg/m(2), and degree of correction, are associated with nonunion, and (2) a modified Radiographic Union Score for Tibial Fractures (RUST) score, taken at 6 weeks and 3 months, would be predictive for delayed or nonunion after medial opening wedge HTO. METHODS: The medical records and radiographs of 185 patients, 21 bilateral cases, treated with a medial open wedge HTO using the TomoFix(®) device were retrospectively evaluated. For all patients, demographic data regarding risk factors were collected from their records. Diagnosis for delayed or nonunion was already done earlier for standard medical care by the orthopaedic surgeon based on clinical and radiographic grounds. For the retrospective radiographic evaluation, a modified RUST score was used in which each tibial cortex is scored by one observer. Logistic regression analysis was used to identify preoperative and postoperative predictive factors for developing delayed or nonunion. In the series, a total of 19 patients (9.2%) developed clinically delayed/nonunion of whom 10 patients (4.9%) developed a nonunion. RESULTS: Smoking was identified as a risk factor for developing delayed/nonunion (19% for smokers versus 5.4% for nonsmokers; p = 0.005; odds ratio, 4.1; 95% confidence interval, 1.5-10.7). By contrast, body mass index, lateral cortical hinge fracture, age, infection, and degree of correction were not risk factors. Patients with delayed/nonunion had lower RUST scores at all time points when a radiograph was taken compared with the total study group. CONCLUSIONS: The RUST score at 6 weeks and 3 months after surgery and the use of tobacco were identified as predictive factors for development of delayed union and nonunion after open wedge HTO. Based on these results, we now actively try to stop patients from smoking and these data are helpful in doing that. The RUST score may be of use to identify which patients are at risk for developing a delayed union so that interventions may be offered earlier in the course of care. LEVEL OF EVIDENCE: Level IV, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.

Platelet-rich plasma can replace fetal bovine serum in human meniscus cell cultures.

Concerns over fetal bovine serum (FBS) limit the clinical application of cultured tissue-engineered constructs. Therefore, we investigated if platelet-rich plasma (PRP) can fully replace FBS for meniscus tissue engineering purposes. Human PRP and platelet-poor plasma (PPP) were isolated from three healthy adult donors. Human meniscal fibrochondrocytes (MFCs) were isolated from resected tissue after a partial meniscectomy on a young patient. Passage-4 MFCs were cultured in monolayer for 24 h, and 3 and 7 days. Six different culture media were used containing different amounts of either PRP or PPP and compared to a medium containing 10% FBS. dsDNA was quantified, and gene expression levels of collagen types I and II and aggrecan were measured at different time points with quantitative polymerase chain reaction in the cultured MFCs. After 7 days, the dsDNA quantity was significantly higher in MFCs cultured in 10% and 20% PRP compared to the other PRP and PPP conditions, but equal to 10% FBS. Collagen type I expression was lower in MFCs cultured with medium containing 5% PRP, 10% and 20% PPP compared to FBS. When medium with 10% PRP or 20% PRP was used, expressions were not significantly different from medium containing 10% FBS. Collagen type II expression was absent in all medium conditions. Aggrecan expression did not show differences between the different media used. However, after 7 days a higher aggrecan expression was measured in most culture conditions, except for 5% PRP, which was similar compared to FBS. Statistical significance was found between donors at various time points in DNA quantification and gene expression, but the same donors were not statistically different in all conditions. At 7 days cell cultured with 10% PRP and 20% PRP showed a higher density, with large areas of clusters, compared to other conditions. In an MFC culture medium, FBS can be replaced by 10% PRP or 20% PRP without altering proliferation and gene expression of human MFCs.

Effect of load on the repair of osteochondral defects using a porous polymer scaffold.

The aim of the present study was to evaluate if a porous polymer scaffold, currently used for partial meniscal replacement in clinical practice, could initiate regeneration and repair of osteochondral defects, and if regeneration and repair were related to mechanical stimulation. Two equally sized osteochondral defects were created bilaterally in each trochlear groove of 16 adult female New Zealand White rabbits. The defects were filled with polycaprolactone-polyurethane scaffolds of either 3 or 4 mm in height. Regeneration and repair of the defects were evaluated after 8 (n = 8) and 14 weeks (n = 8). After 8 weeks of implantation, both the 3- and 4-mm scaffolds were flush with the native cartilage. The amount of cartilaginous tissue was similar in both scaffold types. Pores located in the more central zones of the scaffolds contained less cartilaginous tissue when compared with pores located in the more superficial zones. After 14 weeks, significantly more cartilaginous tissue was present in 4 mm scaffolds when compared with the 3-mm scaffolds (p = 0.03). In the 4-mm scaffolds, progression of cartilaginous tissue from the surface of the scaffold toward the center was observed over time, whereas in the 3-mm scaffold, the percentage of cartilaginous tissue in the central zones was not different from the situation after 8 weeks. Osteochondral defects might be treated using porous polymer scaffolds currently used for partial meniscus replacement, although several limitations need yet to be overcome. The results suggest that mechanical forces may not have to be applied over long periods of time to accelerate tissue formation and increase cartilage repair longevity.

Technical note: easy graft passage without posterior portals in PCL reconstruction.

Graft passage during arthroscopically assisted, single-bundle transtibial PCL reconstruction is a technically demanding surgical procedure. We propose the use of a so called Deschamps clamp, originally designed for cerclage wire transport, in combination with a meniscal repair needle with an eye. This facilitates easy passage of a pull-through needle and obviates extensive debridement of the tibial insertion. Posterior portals are not needed.

Changes in articular cartilage after meniscectomy and meniscus replacement using a biodegradable porous polymer implant.

PURPOSE: To evaluate the long-term effects of implantation of a biodegradable polymer meniscus implant on articular cartilage degeneration and compare this to articular cartilage degeneration after meniscectomy. METHODS: Porous polymer polycaprolacton-based polyurethane meniscus implants were implanted for 6 or 24 months in the lateral compartment of Beagle dog knees. Contralateral knees were meniscectomized, or left intact and served as controls. Articular cartilage degeneration was evaluated in detail using India ink staining, routine histology, immunochemistry for denatured (Col2-¾M) and cleaved (Col2-¾C(short)) type II collagen, Mankin's grading system, and cartilage thickness measurements. RESULTS: Histologically, fibrillation and substantial immunohistochemical staining for both denatured and cleaved type II collagen were found in all three treatment groups. The cartilage of the three groups showed identical degradation patterns. In the 24 months implant group, degradation appeared to be more severe when compared to the 6 months implant group and meniscectomy group. Significantly more cartilage damage (India ink staining, Mankin's grading system, and cartilage thickness measurements) was found in the 24 months implant group compared to the 6 months implant group and meniscectomy group. CONCLUSION: Degradation of the cartilage matrix was the result of both mechanical overloading as well as localized cell-mediated degradation. The degeneration patterns were highly variable between animals. Clinical application of a porous polymer implant for total meniscus replacement is not supported by this study.

Successful salvage of a recurrently dislocating Oxford medial unicompartmental bearing.

Dislocation of the bearing of the Oxford medial unicompartmental arthroplasty is a rare but serious complication. We report the case of a 48-year-old woman with a classic anteromedial arthritis who had 2 bearing dislocations within the first 3 months after index surgery. These were attributable to posterior bony impingement of the bearing against a small retained osteophyte. After arthroscopic resection of the osteophyte, she has retained her original components with no further dislocations or signs of impending failure 7 years later. This case report emphasizes the importance of osteophyte removal from the back of the femoral condyle during an Oxford unicompartmental arthroplasty.

Meniscus replacement using synthetic materials.

The meniscus plays a critical role in load transmission, stability and energy dissipation in the knee joint. Loss of the meniscus leads to joint degeneration and osteoarthritis. An increased understanding of the degenerative changes that occur after meniscectomy made clear that it is beneficial to save as much meniscal tissue as possible. Meniscal repair has become a standard procedure, and partial resection of damaged menisci should be performed as sparingly as possible. However, not all damaged menisci can be treated by partial resection or by repair, making a total meniscectomy inevitable. In these cases, replacement of the resected meniscal tissue by an implant might avoid the articular cartilage degeneration. Different types of meniscal substitutes, such as allografts, collagen, permanent synthetic scaffolds, and biodegradable scaffolds, have been used in experimental and clinical studies. This review highlights the research on these meniscal substitutes and shows that current research is mainly focused on a biological tissue-engineering approach either with or without additional cell-seeding techniques.

Effect on tissue differentiation and articular cartilage degradation of a polymer meniscus implant: A 2-year follow-up study in dogs.

BACKGROUND: Replacement of the meniscus by an implant could potentially avoid cartilage degeneration. HYPOTHESIS: An implant of degradable polycaprolacton-polyurethane should act as a temporary scaffold enabling regeneration of a new meniscus by slow degradation of the polymer and simultaneous in-growth and differentiation of tissues into the typical cartilage-like tissue of the meniscus. STUDY DESIGN: Controlled laboratory study. METHODS: In 13 dogs' knees, the lateral meniscus was replaced with a porous polymer implant (6 and 7 for 6- and 24-month follow-up, respectively); in 7 knees only a meniscectomy was performed. In 6 knees, no surgery was performed. After 6 and 24 months, the implants and the articular cartilage were histologically evaluated. Compression-stress tests were performed on implant biopsy specimens. RESULTS: The implants were fully integrated into the tissue without formation of a capsule. The foreign body reaction did not exceed grade I. Differentiation from fibrous- to cartilage-like tissue was pronounced after 24 months. Viable cells were particularly absent after 24 months in central parts of the most anterior part of the scaffold. The mechanical properties of the implants were intermediate between the scaffold before implantation and native meniscus tissue and were not different between 6 and 24 months. After both 6 and 24 months, small areas of the implant were not covered with tissue. Cartilage degeneration was not prevented. CONCLUSION: A final remodeling of tissue into neomeniscus tissue could not take place since the original structure of the polymer was still present after 24 months. The implant did not prevent cartilage degradation. Several factors are discussed that may be responsible for this. CLINICAL RELEVANCE: Although clinical application of a polymer implant for the replacement of the entire meniscus is not supported by this study, the authors strongly believe in the concept, but further improvements in the implant and surgical technique are needed before such an implant can be recommended for human clinical use.

Assessment of tissue ingrowth rates in polyurethane scaffolds for tissue engineering.

The continuous development of new biomaterials for tissue engineering and the enhancement of tissue ingrowth into existing scaffolds, using growth factors, create the necessity for developing adequate tools to assess tissue ingrowth rates into porous biomaterials. Current histomorphometric techniques evaluating rates of tissue ingrowth tend either to measure the overall tissue content in an entire sample or to depend on the user to indicate a front of tissue ingrowth. Neither method is particularly suitable for the assessment of tissue ingrowth rates, as these methods either lack the sensitivity required or are problematic when there is a tissue ingrowth gradient rather than an obvious tissue ingrowth front. This study describes a histomorphometric method that requires little observer input, is sensitive, and renders detailed information for the assessment of tissue ingrowth rates into porous biomaterials. This is achieved by examining a number of computer-defined concentric zones, which are based on the distance of a pixel from the scaffold edge. Each zone is automatically analyzed for tissue content, eliminating the need for user definition of a tissue ingrowth front and thus reducing errors and observer dependence. Tissue ingrowth rates in two biodegradable polyurethane scaffolds (Estane and polycaprolactone-polyurethane [PCLPU]) specifically designed for tissue engineering of the knee meniscus were assessed. Samples were subcutaneously implanted in rats with follow-up until 6 months. Especially at the earlier follow-up points, PCLPU scaffolds showed significantly higher tissue ingrowth rates than Estane scaffolds, making the PCLPU scaffold a promising candidate for further studies investigating meniscus tissue engineering.

Uncatalyzed synthesis, thermal and mechanical properties of polyurethanes based on poly(epsilon-caprolactone) and 1,4-butane diisocyanate with uniform hard segment.

Polyurethanes based on poly(epsilon-caprolactone) (PCL) (750-2800 g/mol) and 1,4-butane diisocyanate (BDI) with different soft segment lengths and constant uniform hard segment length were synthesized in absence of catalysts for the production of a degradable meniscus scaffold. First the polyesterdiols were endcapped with BDI yielding a macrodiisocyanate with a minimal amount of side reactions and a functionality of 2.0. Subsequently, the macrodiisocyanates were extended with 1,4-butanediol in order to obtain the corresponding polyurethane. The polyurethanes had molecular weights between 78 and 160 kg/mol. Above molar masses of 1900 g/mol of the polyesterdiol crystalline PCL was found while the hard segment showed an increase in melting point from 78 to 122 degrees C with increasing hard segment content. It was estimated that the percentage crystallinity of the hard segment varied between 92 and 26%. The Young's modulus varied between 30 and 264 MPa, the strain at break varied between 870 and 1200% and tear strengths varied between 97 and 237 kJ/m2.

Tissue ingrowth and degradation of two biodegradable porous polymers with different porosities and pore sizes.

Commonly, spontaneous repair of lesions in the avascular zone of the knee meniscus does not occur. By implanting a porous polymer scaffold in a knee meniscus defect, the lesion is connected with the abundantly vascularized knee capsule and healing can be realized. Ingrowth of fibrovascular tissue and thus healing capacity depended on porosity, pore sizes and compression modulus of the implant. To study the lesion healing potential, two series of porous polyurethanes based on 50/50 epsilon-caprolactone/L-lactide with different porosities and pore sizes were implanted subcutaneously in rats. Also, in vitro degradation of the polymer was evaluated. The porous polymers with the higher porosity, more interconnected macropores, and interconnecting micropores of at least 30 microm showed complete ingrowth of tissue before degradation had started. In implants with the lower macro-porosity and micropores of 10-15 microm degradation of the polymer occurred before ingrowth was completed. Directly after implantation and later during degradation of the polymer, PMN cells infiltrated the implant. In between these phases the foreign body reaction remained restricted to macrophages and giant cells. We can conclude that both foams seemed not suited for implantation in meniscal reconstruction while either full ingrowth of tissue was not realized before polymer degradation started or the compression modulus was too low. Therefore, foams must be developed with a higher compression modulus and more connections with sufficient diameter between the macropores.