RESUMO
Oxalate ligands are found in many classes of materials, including energy storage materials and biominerals. Determining their local environments at the atomic scale is thus paramount to establishing the structure and properties of numerous phases. Here, we show that high-resolution 17O solid-state NMR is a valuable asset for investigating the structure of crystalline oxalate systems. First, an efficient 17O-enrichment procedure of oxalate ligands is demonstrated using mechanochemistry. Then, 17O-enriched oxalates were used for the synthesis of the biologically relevant calcium oxalate monohydrate (COM) phase, enabling the analysis of its structure and heat-induced phase transitions by high-resolution 17O NMR. Studies of the low-temperature COM form (LT-COM), using magnetic fields from 9.4 to 35.2 T, as well as 13C-17O MQ/D-RINEPT and 17O{1H} MQ/REDOR experiments, enabled the 8 inequivalent oxygen sites of the oxalates to be resolved, and tentatively assigned. The structural changes upon heat treatment of COM were also followed by high-resolution 17O NMR, providing new insight into the structures of the high-temperature form (HT-COM) and anhydrous calcium oxalate α-phase (α-COA), including the presence of structural disorder in the latter case. Overall, this work highlights the ease associated with 17O-enrichment of oxalate oxygens, and how it enables high-resolution solid-state NMR, for "NMR crystallography" investigations.
RESUMO
Barium-cobaltate-based perovskite (BaCoO3-δ) and barium-cobaltate-based nanocomposites have been intensively studied in energy storage and conversion devices mainly due to flexible oxygen stoichiometry and tunable nonprecious transition metal oxidation states. Although a rich and complex family of structural polymorphs has already been reported for these perovskites in the literature, the potential structural evolution that may occur during the oxygen reduction reaction and the oxygen evolution reaction has not been investigated so far. In this study, we synthesized and characterized the lowest Co-oxidation state possible in the compound, BaCoO2, which exhibits a quartz-derived, trigonal structure with a helicoidally corner-sharing, CoO4-tetrahedral-framework as already proposed by Spitsbergen et al. Oxygen can reversibly be inserted in such a crystal structure to form BaCoO3-δ, i.e., with 0 ≤ δ ≤ 1, based on the results of an in situ coupled thermogravimetric - neutron diffraction study and which presents therefore giant oxygen capacity storage due to the extreme tunability of the electronic configuration of the cobalt cations which defines the fundamental origins of the materials performance. The reversible conversion of BaCoO2 to BaCoO3-δ associated with a similar electronic conductivity above 900 K permits to clarify the high potential of BaCoO3-δ-based energy storage and conversion devices.
RESUMO
In nature, aquaporins (AQPs) are proteins known for fast water transport through the membrane of living cells. Artificial water channels (AWCs) synthetic counterparts with intrinsic water permeability have been developed with the hope of mimicking the performances and the natural functions of AQPs. Highly selective AWCs are needed, and the design of selectivity filters for water is of tremendous importance. Herein, we report the use of self-assembled trianglamine macrocycles acting as AWCs in lipid bilayer membranes that are able to transport water with steric restriction along biomimetic H-bonding-decorated pores conferring selective binding filters for water. Trianglamine [(±)Δ, (mixture of diastereoisomers) and (R,R)3Δ and (S,S)3Δ], trianglamine hydrochloride (Δ.HCl), and alkyl-ureido trianglamines (n = 4, 6, 8, and 12) [(±)ΔC4, (±)ΔC8, (±)ΔC6, and (±)ΔC12] were synthesized for the studies presented here. The single-crystal X-ray structures confirmed that trianglamines form a tubular superstructure in the solid state. The water translocation is controlled via successive selective H-bonding pores (a diameter of 3 Å) and highly permeable hydrophobic vestibules (a diameter of 5 Å). The self-assembled alkyl-ureido-trianglamines achieve a single-channel permeability of 108 water molecules/second/channel, which is within 1 order of magnitude lower than AQPs with good ability to sterically reject ions and preventing the proton transport. Trianglamines present potential for engineering membranes for water purification and separation technologies.
RESUMO
Phosphoramides and their complexes are attractive compounds due to their significant inhibiting functionality in biological medicine. In this paper, a novel organotin(IV)-phosphoramide complex (Sn(CH3)2Cl2{[(3-Cl)C6H4NH]P(O)[NC4H8O]2}2, 1), derived from a reaction between phosphoric triamide ligand with dimethyltin dichloride, and a new amidophosphoric acid ester ([OCH2C(CH3)2CH2O]P(O)[N(CH3)CH2C6H5], 2), prepared from the condensation of a cyclic chlorophosphate reagent with N-methylbenzylamine, are structurally characterized and in silico investigated as potential SARS-CoV-2 and Monkeypox inhibitors by molecular docking simulation. Both compounds crystallize in the monoclinic crystal system with space group P21/c. The asymmetric unit of the complex 1 consists of one-half molecule, where SnIV is located on an inversion center, while the asymmetric part of 2 consists of one whole molecule. In the complex 1, the tin atom adopts a six-coordinate octahedral geometry with trans groups of (Cl)2, (CH3)2 and (PO)2 (PO = phosphoric triamide ligand). The molecular architecture consists of the N-Hâ¯Cl hydrogen bonds stretching as a 1D linear arrangement along the b axis with intermediate R22(12) ring motifs, whereas in the case of 2, the crystal packing is devoid of any classical hydrogen bond interaction. Furthermore, a graphical analysis by using Hirshfeld surface method identifies the most important intermolecular interactions being of the type Hâ¯Cl/Clâ¯H (for 1) and Hâ¯O/Oâ¯H (for 1 and 2), covering the hydrogen bond interactions N-Hâ¯Cl and C-Hâ¯OâP, respectively, which turn out to be favoured. A biological molecular docking simulation on the studied compounds provides evidence to suggest a significant inhibitory potential against SARS-COV-2 (6LU7) and Monkeypox (4QWO) especially for 6LU7 with a binding energy around -6 kcal/mol competing with current effective drugs against this virus (with a binding energy around -5 and -7 kcal/mol). It is worth noting that this report is the first case of an inhibitory potential evaluation of phosphoramide compounds on Monkeypox.
RESUMO
Low-dimensional boron nitride (BN) chains were prepared in the one-dimensional pores of the siliceous zeolites theta-one (TON) and Mobil-twelve (MTW) by the infiltration, followed by the dehydrocoupling and pyrolysis of ammonia borane under high-pressure, high-temperature conditions. High-pressure X-ray diffraction in a diamond anvil cell and in a large-volume device was used to follow in situ these different steps in order to determine the optimal conditions for this process. Based on these results, millimeter-sized samples of BN/TON and BN/MTW were synthesized. Characteristic B-N stretching vibrations of low-dimensional BN were observed by infrared and Raman spectroscopies. The crystal structures were determined using a combination of X-ray diffraction and density functional theory with one and two one-dimensional zig-zag (BN)x chains per pore in BN/TON and BN/MTW, respectively. These 1-D BN chains potentially have interesting photoluminescence properties in the far ultraviolet region of the electromagnetic spectrum.
RESUMO
Three new compounds of amidophosphoric acid esters with a [OCH2C(CH3)2CH2O]P(O)[X] segment (where X=cyclopentylamido (1), 2-aminopyridinyl (2) and pyrrolidinyl (3)) were synthesized and studied using FT-IR and 31P/13C/1H NMR spectroscopies and single-crystal X-ray diffraction analysis. The compounds crystallize in the triclinic space groups P 1 â¾ for 1 and 3 and in the orthorhombic space group Pca21 for 2, where the asymmetric unit consists of three symmetrically-independent molecules for 1 and one molecule for 2 and 3. The intermolecular interactions and supramolecular assemblies are assessed by Hirshfeld surface analysis and enrichment ratios. The results reveal that the substituent effect plays an important role in directing the supramolecular structures. The presence of the aromatic substituent aminopyridine in 2 providing the C-H π interactions leads to a larger variety in interactions including H H, H O/O H, H C/C H and H N/N H contacts, whereas the packings of the compounds 1 and 3 bearing aliphatic substituents only include H H and H O/O H contacts. The enrichment ratios affirm the importance of O H/H O contacts reflecting the hydrogen bond N-H O interactions to be the enriched contacts. Compounds 1-3 were also investigated along with five similar reported structures with a [OCH2C(CH3)2CH2O]P(O) segment for their inhibitory behavior against SARS-CoV-2. The molecular docking results illustrate that the presence of the aromatic amido substituent versus the aliphatic type provides a more favorable condition for their biological activities.
RESUMO
Amino-functionalized P(V) derivatives providing both N- and O-donor modes have attracted interest owing to their potential to form interesting coordination assemblies with applications such as biological drugs. Novel coordination modes of two- and four-dentate tris (pyridin-2-yl)phosphoric triamide OP[NH-2Py]3 as ([Co(II){[O][NH-2Py]P(O)[Ph]}2(DMF)2], 1) and ([Cu(II)Cl{[NH-2Py]2P(O)[N-2Py]}].DMF, 2) have been synthesized and structurally studied. The metal center environment is distorted octahedral for 1 and distorted square pyramidal for 2. The crystal structure of a new complex of Cu(II) with a Cu[N]4[Cl]2 environment ([Cu(II)Cl2(Pyrazole)4], 3) is also investigated. An evaluation of the inhibitory effect against the coronavirus (Main Protease [MPro] of SARS-CoV-2) was carried out by a molecular docking study and illustrates that these compounds have a good interaction tendency with CoV-2, where 1 has the best binding affinity with the biological target comparable with other SARS-CoV-2 drugs. Moreover, theoretical QTAIM and natural bond orbital (NBO) calculations are used to evaluate the metal-oxygen/-nitrogen bonds suggesting that they are mainly electrostatic in nature with a slight covalent contribution. A molecular packing analysis using Hirshfeld surface (HS) analysis shows that N-H O (in 1 and 2) and N-H Cl (in 3) hydrogen bonds are the dominant interactions that contribute to the crystal packing cohesion. The semi-empirical PIXEL method indicates that the electrostatic and repulsion energy components in the structures of 1 and 2 and the dispersion and electrostatic components in that of 3 are the major contributors to the total lattice energy.
RESUMO
Invited for the cover of this issue is the collaborative research team coordinated by Arie vanâ derâ Lee at the University of Montpellier. The image depicts chiral channels with highly mobile water molecules resulting from the robust self-organization of a simple achiral acetamide. Fully reversible release and re-uptake of water molecules takes place near ambient conditions, with efficient water transport and a good selectivity against NaCl suggesting it to be an efficient candidate for desalination processes. Read the full text of the article at 10.1002/chem.20200383.
Assuntos
Aquaporinas , Água , AcetamidasRESUMO
Achiral 2-hydroxy-N-(diphenylmethyl)acetamide (HNDPA) crystallizes in the P61 chiral space group as a hydrate, building up permeable chiral crystalline helical water channels. The crystallization-driven chiral self-resolution process is highly robust, with the same air-stable crystalline form readily obtained under a variety of conditions. Interestingly, the HNDPA supramolecular helix inner pore is filled by a helical water wire. The whole edifice is mainly stabilized by robust hydrogen bonds involving the HNDPA amide bonds and CH π interactions between the HNDPA phenyl groups. The crystalline structure shows breathing behavior, with completely reversible release and re-uptake of water inside the chiral channel under ambient conditions. Importantly, the HNDPA channel is able to transport water very efficiently and selectively under biomimetic conditions. With a permeability per channel of 3.3 million water molecules per second in large unilamellar vesicles (LUV) and total selectivity against NaCl, the HNDPA channel is a very promising functional nanomaterial for future applications.
Assuntos
Aquaporinas , Água , Acetamidas , Cristalização , Ligação de Hidrogênio , Água/químicaRESUMO
Accurate structural models for rubrene, the benchmark organic semiconductor, derived from synchrotron X-ray data in the temperature range of 100-300 K, show that its cofacially stacked tetracene backbone units remain blocked with respect to each other upon cooling to 200 K and start to slip below that temperature. The release of the blocked slippage occurs at approximately the same temperature as the hole mobility crossover. The blocking between 200 and 300 K is caused by a negative correlation between the relatively small thermal expansion along the crystallographic b-axis and the relatively large widening of the angle between herringbone-stacked tetracene units. DFT calculations reveal that this blocked slippage is accompanied by a discontinuity in the variation with temperature of the electronic couplings associated with hole transport between cofacially stacked tetracene backbones.
RESUMO
We herein describe an intermolecular enantioselective α-addition of aldehydes to allenamides using a dual copper/enamine catalytic system. Highly enantioselective addition of aldehydes was obtained thanks to secondary amine catalysts. The process was found to be highly regio-, stereo-, and enantioselective under mild conditions.
RESUMO
The configurational instability of allenyl copper reagents is unveiled. An experimental study highlights the crucial role of Li+ and of the reaction temperature in the control of the configurational stability of allenyl copper reagents. A judicious choice of the reaction conditions allows efficient dynamic kinetic resolution processes and gives a one-pot access to homopropargylic alcohols or amines bearing up to four contiguous defined stereogenic centers.
RESUMO
Artificial water channels (AWCs) and their natural aquaporin counterparts selectively transport water. They represent a tremendous source of inspiration to devise biomimetic membranes for several applications, including desalination. They contain variable water-channel constructs with adaptative architectures and morphologies. Herein, we critically discuss the structural details that can impact the performances of biomimetic I quartets, obtained via adaptive self-assembly of alkylureido-ethylimidazoles HC4-HC18 in bilayer or polyamide (PA) membranes. We first explore the performances in bilayer membranes, identifying that hydrophobicity is an essential key parameter to increase water permeability. We compare various I quartets with different hydrophobic tails (from HC4 to HC18), and we reveal that a huge increase in single-channel water permeability, from 104 to 107 water molecules/s/channel, is obtained by increasing the size of the alkyl tail. Quantitative assessment of AWC-PA membranes shows that water permeability increases roughly from 2.09 to 3.85 L m-2 h-1 bar-1, for HC4 and HC6 reverse osmosis membranes, respectively, while maintaining excellent NaCl rejection (99.25-99.51%). Meanwhile, comparable HC8 loading induces a drop of performance reminiscent of a defective membrane formation. We show that the production of nanoscale sponge-like water channels can be obtained with insoluble, low soluble, and low dispersed AWCs, explaining the observed subpar performance. We conclude that optimal solubility enabling breakthrough performance must be considered to not only maximize the inclusion and the stability in the bilayer membranes but also achieve an effective homogeneous distribution of percolated particles that minimizes the defects in hybrid polyamide membranes.
RESUMO
The thermal expansion properties of crystalline organic compounds are investigated by data mining of the Cambridge Structural Database (CSD). The mean volumetric thermal expansion coefficient is 168.8 × 10-6 K-1 and the mean uniaxial thermal expansion coefficient is 71.4 × 10-6 K-1, based on 745 and 1129 different observations, respectively. Normal and anomalous coefficients can be identified using these values and the associated standard deviations. The anisotropy of the thermal expansion is also evaluated and found to have a very broad distribution. 4719 different structures, comprising 4093 different molecular compounds and 626 additional polymorphs have been analyzed on their thermal expansion properties. Approximately 34% of these structures may have at least one orthogonal axis with negative thermal expansion, much more than generally believed. Moreover 127 structures have been identified which could have negative volumetric thermal expansion. Experimental validation using a robust protocol with data collected at more than 2 different temperatures is required to validate these cases.
RESUMO
Understanding water transport mechanisms at the nanoscale level remains a challenge for theoretical chemical physics. Major advances in chemical synthesis have allowed us to discover new artificial water channels, rivaling with or even surpassing water conductance and selectivity of natural protein channels. In order to interpret experimental features and understand microscopic determinants for performance improvements, numerical approaches based on all-atom molecular dynamics simulations and enhanced sampling methods have been proposed. In this study, we quantify the influence of microscopic observables, such as channel radius and hydrogen bond connectivity, and of meso-scale features, such as the size of self-assembly blocks, on the permeation rate of a self-assembled nanocrystal-like artificial water channel. Although the absolute permeation rate extrapolated from these simulations is overestimated by one order of magnitude compared to the experimental measurement, the detailed analysis of several observed conductive patterns in large assemblies opens new pathways to scalable membranes with enhanced water conductance for the future design.
RESUMO
Transmembrane protein channels are of significant importance for the design of biomimetic artificial ion channels. Regarding the transport principles, they may be constructed from amphiphilic compounds undergoing self-assembly that synergistically generate directional superstructures across bilayer membranes. Particularly interesting, these alignments may impose an artificial pore structure that may control the ionic conduction and translocate water and ions sharing one pathway across the cell membrane. Herein, we report that the imidazole and 3-amino-triazole amphiphiles self-assemble via multiple H-bonding to form stable artificial networks within lipid bilayers. The alignment of supramolecular assemblies influences the conduction of ions, envisioned to diffuse along the hydrophilic pathways. Compounds 1-8 present subtle variations on the ion transport activities, depending the structure of hydrophilic head and hydrophobic components. Fluorinated compounds 3, 4 and 7, 8 outperform the corresponding non-fluorinated counterparts 1, 2 and 5, 6. Under the same conditions, the R enantiomers present a higher activity vs. the S enantiomers. The present systems associating supramolecular self-assembly with ion-transport behaviors may represent very promising unexplored alternatives for ion-transport along with their transient superstructures within bilayer membranes, paralleling to that of biology.
RESUMO
High-pressure X-ray diffraction and Raman spectroscopy in a diamond anvil cell were used to study the insertion of the chemical hydrogen storage material, ammonia borane, in the one-dimensional pores of the zeolite theta-1 TON. Heating of this material up to 300 °C under pressures up to 5 GPa resulted in the release of a significant amount of hydrogen due to the conversion of ammonia borane confined in the channels of TON and outside the zeolite to polyaminoborane and then polyiminoborane chains. The filling of TON with hydrogen resulted in a much greater increase in unit cell volume than that corresponding to thermal expansion of normal compact inorganic solids. This process at high temperature is accompanied by a phase transition from the collapsed high-pressure Pbn21 form to the more symmetric Cmc21 phase with expanded pores. This material has a high capacity for hydrogen adsorption under high-temperature, high-pressure conditions.
RESUMO
Artificial water channels (AWCs) are known to selectively transport water, with ion exclusion. Similarly to natural porins, AWCs encapsulate water wires or clusters, offering continuous and iterative H-bonding that plays a vital role in their stabilization. Herein, we report octyl-ureido-polyol AWCs capable of self-assembly into hydrophilic hydroxy channels. Variants of ethanol, propanediol, and trimethanol are used as head groups to modulate the water transport permeabilities, with rejection of ions. The hydroxy channels achieve a single-channel permeability of 2.33 × 108 water molecules per second, which is within the same order of magnitude as the transport rates for aquaporins. Depending on their concentration in the membrane, adaptive channels are observed in the membrane. Over increased concentrations, a significant shift occurs, initiating unexpected higher water permeation. Molecular simulations probe that spongelike or cylindrical aggregates can form to generate transient cluster water pathways through the bilayer. Altogether, the adaptive self-assembly is a key feature influencing channel efficiency. The adaptive channels described here may be considered an important milestone contributing to the systematic discovery of artificial water channels for water desalination.
RESUMO
This work focused on studying the physicochemical and antioxidant properties changes of varying molecular weight (Mw) chitosan-depolymerization products (CDP)-based films occurring after crosslinking by heat-treatment and Maillard reaction (MR). Based on color properties and browning index, an enhancement of films properties was observed after treatment at 90 °C with a reduction in their water content, solubility and contact angle. Brown MR products were developed in heated films containing glucose thus improving their barrier properties. This effect was more pronounced in lower Mw-CDP based films. In addition, according to TGA, EAB and TS analyses an improvement in heat-treated films thermal stability and mechanical properties was detected and further confirmed through FTIR, X-ray and SEM analyses. The evaluation of the antioxidant potential through four different assays allowed to conclude that glucose addition, thermal treatment and the use of low Mw-CDP highly enhanced the MR-modified films antioxidant capacity. Consequently, MR crosslinked chitosan-based films could be potentially used as an alternative for bioactive and functional packaging effective in food oxidation inhibition, especially using low Mw chitosan derivatives.
RESUMO
The crystalline forms of tris(pyridin-2-yl)phosphoric triamide, OP[NH-2Py]3 were investigated using single crystal X-ray diffraction, both as a metal complex [Co{(O)P[NH-2Py]2[NH-2PyH]}2]Cl3, compound 1, and as the purely organic pseudopolymorphs, the pure/anhydrate OP[NH-2Py]3, 2, monohydrate 2OP[NH-2Py]3·H2O, 3 and solvate 2OP[NH-2Py]3·2DMF·H2O, 4, respectively. An improved model of the metal organic framework (MOF) structure of Cu(ii)O6 {[Cu(OCHO)3][(CH3)2NH2]} n , 5 is also reported. Compound 1 is the first example of a discrete chelate phosphoric triamide (PT) complex with an [N]3P(O)-based backbone which in the PT compound acts as a flexible tridentate ligand. The structures 1, 3 and 4 crystallize in the monoclinic space group P21/n, while the anhydrous form 2 crystallizes in the R3Ì trigonal space group. 5 which was obtained as a byproduct of the synthesis process of coordination compounds of OP[NH-2Py]3, crystallizes in the monoclinic space group I2/c. Hydrogen bonding pattern analysis for the different solid state forms of OP[NH-2Py]3 (2-4) shows a 2D sheet of the N-Hâ¯N linked molecules for 2, and a 1D chain and a ten-membered ring motif, both formed via the hydrogen bonds N-Hâ¯O, N-Hâ¯N and O-Hâ¯O, for 3 and 4, respectively. Of note is the unusual absence of the expected hydrogen bond interaction N-Hâ¯O[double bond, length as m-dash]P of PT compounds and also a lack of any significant π interactions in structure 2. The role of the solvent/hydrate and substituent (aminopyridine) in the formation of the expected hydrogen bond interactions in the studied solid state forms is also investigated. For these structures, crystal packing analysis using 3D Hirshfeld surface (HS), 2D fingerprint plot (FP) and enrichment ratio (E) calculations confirm a competition between the pyridinyl nitrogen and phosphoryl oxygen atoms as H-bond acceptors to construct the N-Hâ¯N or N-Hâ¯O contacts. Moreover, the significant differences between the anhydrous form of OP[NH-2Py]3, 2, and the monohydrate and solvate forms, 3 and 4, can be correlated to the pseudo-infinite (in 2) versus finite values (in 3 and 4) for the upper values of d e and d i on the related full FPs.