RESUMO
BACKGROUND AND PURPOSE: The Unity MR-Linac is equipped with an EPID, the images from which contain information about the dose delivered to the patient. The purpose of this study was to introduce a framework for the automatic dosimetric verification of online adapted plans using 3D EPID dosimetry and to present the obtained dosimetric results. MATERIALS AND METHODS: The framework was active during the delivery of 1207 online adapted plans corresponding to 127 clinical IMRT treatments (74 prostate, 19 rectum, 19 liver and 15 lymph node oligometastases). EPID reconstructed dose distributions in the patient geometry were calculated automatically and then compared to the dose distributions calculated online by the treatment planning system (TPS). The comparison was performed by γ-analysis (3% global/2mm/10% threshold) and by the difference in median dose to the high-dose volume (ΔHDVD50). 85% for γ-pass rate and 5% for ΔHDVD50 were used as tolerance limit values. RESULTS: 93% of the online plans were verified automatically by the framework. Missing EPID data was the reason for automation failure. 91% of the verified plans were within tolerance. CONCLUSION: Automatic dosimetric verification of online adapted plans on the Unity MR-Linac is feasible using in vivo 3D EPID dosimetry. Almost all online adapted plans were approved automatically by the framework. This newly developed framework is a major step forward towards the clinical implementation of a permanent safety net for the entire online adaptive workflow.
Assuntos
Planejamento da Radioterapia Assistida por Computador , Radioterapia de Intensidade Modulada , Algoritmos , Humanos , Masculino , Imagens de Fantasmas , Radiometria , Dosagem RadioterapêuticaRESUMO
BACKGROUND: Studies assessing the impact of selective internal radiation therapy (SIRT) on the regional liver function in patients with hepatocellular carcinoma (HCC) are sparse. This study assessed the changes in total and regional liver function using hepatobiliary scintigraphy (HBS) and investigated the utility of HBS to predict post-SIRT liver dysfunction. METHODS: Patients treated with SIRT for HCC between 2011 and 2019, underwent Tc-mebrofenin HBS with single-photon emission computed tomography/computed tomography (SPECT/CT) before and 6 weeks after SIRT. The corrected mebrofenin uptake rate (cMUR) and corresponding volume was measured in the total liver, and in treated and nontreated liver regions. Patients with and without post-SIRT liver dysfunction were compared. RESULTS: A total of 29 patients, all Child-Pugh-A and mostly intermediate (72%) stage HCC were included in this study. Due to SIRT, the cMURtotal declined from 5.8 to 4.5%/min/m (P < 0.001). Twenty-two patients underwent a lobar SIRT, which induced a decline in cMUR (2.9-1.7%/min/m, P < 0.001) and volume (1228-1101, P = 0.002) of the treated liver region, without a change in cMUR (2.4-2.0%/min/m, P = 0.808) or volume (632-644 mL, P = 0.661) of the contralateral nontreated lobe. There were no significant pre-SIRT differences in total or regional cMUR or volume between patients with and without post-SIRT liver dysfunction. CONCLUSION: In patients treated with SIRT for HCC, HBS accurately identified changes in total and regional liver function and may have a complementary role to personalize lobar or selective SIRT. In this pilot study, there were no pre-SIRT differences in cMUR or volume to aid in predicting post-SIRT liver dysfunction.
Assuntos
Compostos de Anilina , Carcinoma Hepatocelular/diagnóstico por imagem , Carcinoma Hepatocelular/radioterapia , Glicina , Neoplasias Hepáticas/diagnóstico por imagem , Neoplasias Hepáticas/radioterapia , Compostos de Organotecnécio , Tomografia Computadorizada com Tomografia Computadorizada de Emissão de Fóton Único , Adulto , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Projetos Piloto , Estudos Retrospectivos , Resultado do TratamentoRESUMO
Radioembolization treatment is preceded by a 99mTc-MAA safety procedure, which is used to estimate the lung shunt fraction (LSF). Normally, the LSF is estimated by using the geometric mean of planar scintigraphy (PS-GM). However, concern has been raised about the potential overestimation of the LSF by PS-GM. Alternatively, SPECT/CT may be used for LSF estimation, but requires lengthy acquisitions, 3D segmentation, and has a limited field of view, which calls for extrapolation of the reconstructed lung counts, which introduces another source of error. We have developed a simplified SPECT/CT protocol for LSF estimation, called the quantitative orthogonal planar (QOP) method that requires only four projections to quantitatively reconstruct liver and lung activity. This mitigates the problems associated with LSF estimations from SPECT/CT. The purpose of this study was to introduce and evaluate QOP by comparing its performance to PS-GM and SPECT/CT in a retrospective patient study, and by supporting simulation experiments. Patients who received at least one 99mTc-MAA safety procedure in our center were included in this study. QOP and PS-GM were compared to SPECT/CT in Bland-Altman analyses. Supporting digital phantom experiments with a known ground-truth were performed to evaluate the performance of this method. Analysis of PS-GM versus SPECT/CT LSF estimates revealed both a larger imprecision and significant bias by PS-GM (limits of agreement: 8.1 percentage points (pp); bias: 2.7 pp). The QOP method agreed better with the SPECT/CT-based estimation (limits of agreement: 2.07 pp; bias: 0.52 pp). This observation was consistent with the digital phantom experiments. We have proposed and evaluated a novel method called QOP for LSF estimation that performs almost as accurate as SPECT/CT, but without the need for lung mass extrapolation, long scan duration, or extensive manual segmentation, making it as fast as current PS-GM.
Assuntos
Embolização Terapêutica/métodos , Neoplasias Hepáticas/radioterapia , Pulmão/diagnóstico por imagem , Tomografia Computadorizada com Tomografia Computadorizada de Emissão de Fóton Único , Adulto , Idoso , Idoso de 80 Anos ou mais , Braquiterapia , Simulação por Computador , Embolização Terapêutica/efeitos adversos , Feminino , Humanos , Fígado/diagnóstico por imagem , Neoplasias Hepáticas/diagnóstico por imagem , Pulmão/efeitos da radiação , Masculino , Pessoa de Meia-Idade , Segurança do Paciente , Imagens de Fantasmas , Cintilografia , Reprodutibilidade dos Testes , Estudos Retrospectivos , Tecnécio/farmacologiaRESUMO
PURPOSE: Quantitative accuracy of the single photon emission computed tomography (SPECT) reconstruction of the pretreatment procedure of liver radioembolization is crucial for dosimetry; visual quality is important for detecting doses deposited outside the planned treatment volume. Quantitative accuracy is limited by respiratory motion. Conventional gating eliminates motion by count rejection but increases noise, which degrades the visual reconstruction quality. Motion compensation using all counts can be performed if the motion signal and motion vector field over time are known. The measurement of the motion signal of a patient currently requires a device (such as a respiratory belt) attached to the patient, which complicates the acquisition. The motion vector field is generally extracted from a previously acquired four-dimensional scan and can differ from the motion in the scan performed during the intervention. The simultaneous acquisition of fluoroscopic and nuclear projections can be used to obtain both the motion vector field and the projections of the corresponding (moving) activity distribution. This eliminates the need for devices attached to the patient and provides an accurate motion vector field for SPECT reconstruction. Our approach to motion compensation would primarily be beneficial for interventional SPECT because the time-critical setting requires fast scans and no inconvenience of an external apparatus. The purpose of this work is to evaluate the performance of the motion compensation approach for interventional liver SPECT by means of simulations. METHODS: Nuclear and fluoroscopic projections of a realistic digital human phantom with respiratory motion were generated using fast Monte Carlo simulators. Fluoroscopic projections were sampled at 1-5 Hz. Nuclear data were acquired continuously in list mode. The motion signal was extracted from the fluoroscopic projections by calculating the center-of-mass, which was then used to assign each photon to a corresponding motion bin. The fluoroscopic projections were reconstructed per bin and coregistered, resulting in a motion vector field that was used in the SPECT reconstruction. The influence of breathing patterns, fluoroscopic imaging dose, sampling rate, number of bins, and scanning time was studied. In addition, the motion compensation method was compared with conventional gating to evaluate the detectability of spheres with varying uptake ratios. RESULTS: The liver motion signal was accurately extracted from the fluoroscopic projections, provided the motion was stable in amplitude and the sampling rate was greater than 2 Hz. The minimum total fluoroscopic dose for the proposed method to function in a 5-min scan was 10 µGy. Although conventional gating improved the quantitative reconstruction accuracy, substantial background noise was observed in the short scans because of the limited counts available. The proposed method similarly improved the quantitative accuracy, but generated reconstructions with higher visual quality. The proposed method provided better visualization of low-contrast features than when using gating. CONCLUSION: The proposed motion compensation method has the potential to improve SPECT reconstruction quality. The method eliminates the need for external devices to measure the motion signal and generates an accurate motion vector field for reconstruction. A minimal increase in the fluoroscopic dose is required to substantially improve the results, paving the way for clinical use.
Assuntos
Fluoroscopia , Processamento de Imagem Assistida por Computador/métodos , Fígado/diagnóstico por imagem , Movimento , Respiração , Tomografia Computadorizada de Emissão de Fóton Único , Imagens de Fantasmas , Razão Sinal-Ruído , Fatores de TempoRESUMO
Simultaneous acquisition of nuclear and fluoroscopic projections could be of benefit for image-guided radionuclide administration. A gamma camera positioned behind an x-ray flat panel detector can accomplish such simultaneous acquisition, but the gamma camera performance suffers from the intense x-ray dose. A regular NaI(Tl)-based camera has nominal performance up to 0.02 nGy dose per pulse, whereas 10 nGy dose is expected for our foreseen applications. We evaluated the performance of CeBr3- and CZT-based detectors and investigated a cost-effective improvement of a regular NaI(Tl)-based camera by the introduction of a high-pass filter and shorting circuit. A CeBr3-based detector was exposed to 5 mGy x-ray dose and the resulting light emission was measured over time to quantify the crystal afterglow, allowing comparison with a previously measured NaI(Tl)-based detector. The NaI(Tl)-, CeBr3- and CZT-based detectors were exposed to x-ray pulse sequences with dose from 0.06 to 60 nGy, while being irradiated with a gamma source. The mean gamma energy and energy resolution in between the x-ray pulses were measured as a reference of the detector performance. The afterglow signal after 3 ms was 14.1% for the NaI(Tl)-based detector, whereas for the CeBr3-based detector it was only 0.1%. The limits for a proper functioning detectors are 0.32 nGy for the NaI(Tl)-based detector with high-pass filter and shorting circuit and 18.94 nGy for the one with CeBr3. No energy degradation was observed for the CZT module in the studied dose range. The performance of regular NaI(Tl)-based gamma cameras deteriorates when exposed to high x-ray doses. CeBr3 and CZT are much better suited for introduction into a dual-layer detector but have high associated costs. Addition of a high-pass filter and shorting circuit into the PMT of a NaI(Tl)-based detector is a cost-effective solution that works well for low dose levels.
Assuntos
Cádmio , Cério/química , Fluoroscopia/instrumentação , Telúrio , Tálio , Zinco , Desenho de Equipamento , Fatores de TempoRESUMO
Hepatobiliary scintigraphy (HBS) is an emerging tool in the assessment of hepatic function. This nuclear imaging technique can be used to calculate both global and regional liver function. It has proven to be the most reliable way of assessing the distribution of liver function, especially in patients with impaired liver function due to, for example, cirrhosis or after chemotherapy. There are two types of tracers: Technetium-99m with a type of iminodiacetic acid and Technetium-99m galactosyl human serum albumin. The main indication for HBS is the assessment of the future liver remnant function in patients scheduled to undergo hemihepatectomy; to predict the risk of posthepatectomy liver failure. Another upcoming indication is the use of HBS in patients undergoing radioembolization.
Assuntos
Sistema Biliar/diagnóstico por imagem , Fígado/diagnóstico por imagem , Cintilografia/métodos , Radioterapia Guiada por Imagem , Cirurgia Assistida por Computador , Humanos , Fígado/efeitos da radiação , Fígado/cirurgiaRESUMO
Radioembolization is increasingly used as a bridge to resection (i.e., radiation lobectomy). It combines ipsilateral tumor control with the induction of contralateral hypertrophy to facilitate lobar resection. The aim of this pilot study was to investigate the complementary value of hepatobiliary scintigraphy (HBS) before and after radioembolization in the assessment of the future remnant liver. Methods: Consecutive patients with liver tumors who underwent HBS before and after 90Y radioembolization were included. Regional (treated/nontreated) and whole liver function and volume were determined on HBS and CT. Changes in regional liver function and volume were correlated with the functional liver absorbed doses, determined on 90Y PET/CT. In addition, the correlation between liver volume and function change was evaluated. Results: Thirteen patients (10 hepatocellular carcinoma, 3 metastatic colorectal carcinoma) were included. Liver function of the treated part declined after radioembolization (HBS-pre, 4.0%/min/m2; HBS-post, 1.9%/min/m2; P = 0.001), whereas the function of the nontreated part increased (HBS-pre, 1.4%/min/m2; HBS-post, 2.8%/min/m2; P = 0.009). Likewise, treated volume decreased (pretreatment, 1,118.7 cm3; posttreatment, 870.7 cm3; P = 0.003), whereas the nontreated volume increased (pretreatment, 412.7 cm3; posttreatment, 577.6 cm3; P = 0.005). Bland-Altman analysis revealed a large bias (29%) between volume decrease and function decrease in the treated part and wide limits of agreement (-7.7%-65.6%). The bias between volume and function change was smaller (±6.0%) in the nontreated part of the liver, but limits of agreement were still wide (-117.9%-106.7%). Conclusion: Radioembolization induces regional changes in liver function that are accurately detected by HBS. Limits of agreement between function and volume changes were wide, showing large individual differences. This finding indicates that HBS may have a complementary role in the management of patients for radiation lobectomy.
Assuntos
Carcinoma Hepatocelular/diagnóstico por imagem , Neoplasias Colorretais/diagnóstico por imagem , Neoplasias Hepáticas/diagnóstico por imagem , Fígado/diagnóstico por imagem , Radioisótopos de Ítrio/farmacologia , Idoso , Carcinoma Hepatocelular/radioterapia , Neoplasias Colorretais/radioterapia , Embolização Terapêutica , Feminino , Humanos , Processamento de Imagem Assistida por Computador , Testes de Função Hepática , Neoplasias Hepáticas/radioterapia , Masculino , Pessoa de Meia-Idade , Metástase Neoplásica , Projetos Piloto , Tomografia por Emissão de Pósitrons combinada à Tomografia Computadorizada , Ablação por Radiofrequência , Cintilografia , Compostos Radiofarmacêuticos/farmacologia , Reprodutibilidade dos Testes , Estudos RetrospectivosRESUMO
Fluoroscopic procedures involving radionuclides would benefit from interventional nuclear imaging by obtaining real-time feedback on the activity distribution. We have previously proposed a dual-layer detector that offers such procedural guidance by simultaneous fluoroscopic and nuclear planar imaging. Acquisition of single photon computed tomography (SPECT) and cone beam computed tomography (CBCT) could provide additional information on the activity distribution. This study investigates the feasibility and the image quality of simultaneous SPECT/CBCT, by means of phantom experiments and simulations. Simulations were performed to study the obtained reconstruction quality for (i) clinical SPECT/CT, (ii) a dual-layer scanner configured with optimized hardware, and (iii) our (non-optimized) dual-layer prototype. Experiments on an image quality phantom and an anthropomorphic phantom (including extrahepatic depositions with volumes and activities close to the median values encountered in hepatic radioembolization) were performed with a clinical SPECT/CT scanner and with our dual-layer prototype. Nuclear images were visually and quantitatively evaluated by measuring the tumor/non-tumor (T/N) ratio and contrast-to-noise ratio (CNR). The simulations showed that the maximum obtained CNR was 38.8 ± 0.8 for the clinical scanner, 30.2 ± 0.9 for the optimized dual-layer scanner, and 20.8 ± 0.4 for the prototype scanner. T/N ratio showed a similar decline. The phantom experiments showed that performing simultaneous SPECT/CBCT is feasible. The CNR obtained from the SPECT reconstruction of largest sphere in the image quality phantom was 43.1 for the clinical scanner and 28.6 for the developed prototype scanner. The anthropomorphic phantom showed that the extrahepatic depositions were detected with both scanners. A dual-layer detector is able to simultaneously acquire SPECT and CBCT. Both CNR and T/N ratio are worse than that of a clinical system, but the phantom experiments showed that extrahepatic depositions with volumes and activities close to the median values encountered in hepatic radioembolization could be distinguished.
Assuntos
Tomografia Computadorizada de Feixe Cônico/instrumentação , Tomografia Computadorizada de Feixe Cônico/métodos , Processamento de Imagem Assistida por Computador/métodos , Imagens de Fantasmas , Tomografia Computadorizada de Emissão de Fóton Único/instrumentação , Tomografia Computadorizada de Emissão de Fóton Único/métodos , HumanosRESUMO
Purpose To develop and evaluate a dual-layer detector capable of acquiring intrinsically registered real-time fluoroscopic and nuclear images in the interventional radiology suite. Materials and Methods The dual-layer detector consists of an x-ray flat panel detector placed in front of a γ camera with cone beam collimator focused at the x-ray focal spot. This design relies on the x-ray detector absorbing the majority of the x-rays while it is more transparent to the higher energy γ photons. A prototype was built and dynamic phantom images were acquired. In addition, spatial resolution and system sensitivity (evaluated as counts detected within the energy window per second per megabecquerel) were measured with the prototype. Monte Carlo simulations for an improved system with varying flat panel compositions were performed to assess potential spatial resolution and system sensitivity. Results Experiments with the dual-layer detector prototype showed that spatial resolution of the nuclear images was unaffected by the addition of the flat panel (full width at half maximum, 13.6 mm at 15 cm from the collimator surface). However, addition of the flat panel lowered system sensitivity by 45%-60% because of the nonoptimized transmission of the flat panel. Simulations showed that an attenuation of 27%-35% of the γ rays in the flat panel could be achieved by decreasing the crystal thickness and housing attenuation of the flat panel. Conclusion A dual-layer detector was capable of acquiring real-time intrinsically registered hybrid images, which could aid interventional procedures involving radionuclides. Published under a CC BY-NC-ND 4.0 license. Online supplemental material is available for this article.
Assuntos
Fluoroscopia/instrumentação , Radiografia Intervencionista/instrumentação , Cintilografia/instrumentação , Desenho de Equipamento , Câmaras gama , Humanos , Método de Monte Carlo , Imagens de FantasmasRESUMO
PURPOSE: The efficiency of radioembolization procedures could be greatly enhanced if results of the 99m Tc-MAA pretreatment procedure were immediately available in the interventional suite, enabling 1-day procedures as a result of direct estimation of the hepatic radiation dose and lung shunt fraction. This would, however, require a relatively fast, but still quantitative, SPECT procedure, which might be achieved with acquisition protocols using nonuniform durations of the projection images. METHODS: SPECT liver images of the 150-MBq 99m Tc-MAA pretreatment procedure were simulated for eight different lesion locations and two different lesion sizes using the digital XCAT phantom for both single- and dual-head scanning geometries with respective total acquisition times of 1, 2, 5, 10, and 30 min. Three nonuniform projection-time acquisition protocols ("half-circle SPECT (HCS)," "nonuniform SPECT (NUS) I," and "NUS II") for fast quantitative SPECT of the liver were designed and compared with the standard uniform projection-time protocol. Images were evaluated in terms of contrast-to-noise ratio (CNR), activity recovery coefficient (ARC), tumor/non-tumor (T/N) activity concentration ratio, and lung shunt fraction (LSF) estimation. In addition, image quality was verified with a physical phantom experiment, reconstructed with both clinical and Monte Carlo-based reconstruction software. RESULTS: Simulations showed no substantial change in image quality and dosimetry by usage of a nonuniform projection-time acquisition protocol. Upon shortening acquisition times, CNR dropped, but ARC, T/N ratio, and LSF estimates were stable across all simulated acquisition times. Results of the physical phantom were in agreement with those of the simulations. CONCLUSION: Both uniform and nonuniform projection-time acquisition liver SPECT protocols yield accurate dosimetric metrics for radioembolization treatment planning in the interventional suite within 10 min, without compromising image quality. Consequently, fast quantitative SPECT of the liver in the interventional suite is feasible.
Assuntos
Embolização Terapêutica , Fígado/diagnóstico por imagem , Agregado de Albumina Marcado com Tecnécio Tc 99m , Tomografia Computadorizada de Emissão de Fóton Único , Fígado/efeitos da radiação , Imagens de Fantasmas , Radiometria , Razão Sinal-Ruído , Fatores de TempoRESUMO
BACKGROUND: Generation of a SPECT scan during procedure may aid in the optimization of treatments as liver radioembolization by offering image-guided dosimetry. This, however, requires both shortened acquisition times and fast quantitative reconstruction. Focusing collimators increase sensitivity and thus may speed up imaging. Monte Carlo-based iterative reconstruction has shown to provide quantitative results for parallel hole collimators but may be slow. The purpose of this work is to develop fast Monte Carlo-based reconstruction for focusing collimators and to evaluate the impact of reconstruction and collimator choice on quantitative accuracy of liver dosimetry by means of simulations. RESULTS: The developed fast Monte Carlo simulator was found to accurately generate projections compared to a full Monte Carlo simulation, providing projections in several seconds instead of several days. Monte Carlo-based scatter correction was superior to other scatter correction methods in describing recovered activity and reached similar noise levels as dual-energy window scatter correction. Although truncation artifacts were present in the cone beam collimator (50 cm), the region inside the field of view (FOV) could be reconstructed without loss of accuracy. Provided the object to image is inside the FOV, the focusing collimator with 50 cm focal distance could retrieve the same noise levels as a parallel hole collimator in 68% of the total scanning time, the multifocal collimator in 73% of the time, and the 100-cm focal distance collimator in 84% of the time. CONCLUSION: Focusing collimators combined with Monte Carlo-based reconstruction have the ability to enable quantitative imaging of the FOV in a significantly shorter timeframe. The proposed approach to the forward projector will additionally make it possible to reconstruct within minutes. These are crucial steps in moving toward real-time dosimetry during interventions.
RESUMO
PURPOSE: Prior to 90 Y radioembolization, a pretreatment procedure is performed, in which 99m Tc-macroaggerated albumin (99m Tc-MAA) is administered to estimate the amount of activity shunting to the lungs. A high lung shunt fraction (LSF) may impose lower prescribed treatment activity or even impede treatment. Accurate LSF measurement is therefore important, but is hampered by the use of MAA particles, which differ from 90 Y microspheres. Ideally, 90 Y microspheres would also be used for the pretreatment procedure, but this would require the activity to be lower than an estimated safety threshold of about 100 MBq to avoid unintended radiation damage. However, 90 Y is very challenging to image, especially at low activities (<100 MBq). The purpose of this study was to evaluate the performance of three nuclear imaging techniques in estimating the LSF in a low activity 90 Y pretreatment scan, using an anthropomorphic phantom: (a) positron emission tomography/computed tomography (PET/CT), (b) Bremsstrahlung single photon emission tomography/computed tomography (SPECT/CT), and (c) planar imaging. METHODS: The lungs and liver of an anthropomorphic phantom were filled with 90 Y chloride to acquire an LSF of 15%. Several PET/CT (Siemens Biograph mCT), Bremsstrahlung SPECT/CT (Siemens Symbia T16) and planar images (Siemens Symbia T16) were acquired at a range of 90 Y activities (1586 MBq down to 25 MBq). PET images were reconstructed using a clinical protocol (attenuation correction, TOF, scatter and random correction, OP-OSEM), SPECT images were reconstructed using both a clinical protocol (attenuation correction, OSEM) and a Monte Carlo (MC)-based reconstruction method (MC-based detector, scatter, and attenuation modeling, OSEM), for planar images the geometric mean was calculated. In addition, in all cases except clinical SPECT, background correction was included. The LSF was calculated by assessing the reconstructed activity in the lungs and in the liver, as delineated on the CT images. In addition to the 15% LSF, an extra "cold" region was included to simulate an LSF of 0%. RESULTS: PET reconstructions accurately estimated the LSF (absolute difference <2 percent point (pp)) when total activity was over 200 MBq, but greatly overestimated the LSF (up to 25pp) when activity decreased. Bremsstrahlung SPECT clinical reconstructions overestimated the LSF (up to 13pp) when activity was both high and low. Similarly, planar images overestimated the LSF (up to 23pp). MC-based SPECT reconstructions accurately estimated the LSF with an absolute difference of less than 1.3pp for activities as low as 70 MBq. CONCLUSIONS: Bremsstrahlung SPECT/CT can accurately estimate the LSF for a 90 Y pretreatment procedure using a theoretically safe 90 Y activity as low as 70 MBq, when reconstructed with an MC-based model.
Assuntos
Embolização Terapêutica/instrumentação , Pulmão/efeitos da radiação , Imagens de Fantasmas , Radioisótopos de Ítrio/uso terapêutico , Humanos , Processamento de Imagem Assistida por Computador , Pulmão/diagnóstico por imagem , Tomografia por Emissão de Pósitrons combinada à Tomografia Computadorizada , Tomografia Computadorizada com Tomografia Computadorizada de Emissão de Fóton ÚnicoRESUMO
Radioembolisation with yttrium-90 (90Y) is increasingly used as a treatment of unresectable liver malignancies. For safety, a scout dose of technetium-99m macroaggregated albumin (99mTc-MAA) is used prior to the delivery of the therapeutic activity to mimic the deposition of 90Y. One-day procedures are currently limited by the lack of nuclear images in the intervention room. To cope with this limitation, an interventional simultaneous fluoroscopic and nuclear imaging device is currently being developed. The purpose of this simulation study was to evaluate the accuracy of estimating the lung shunt fraction (LSF) of the scout dose in the intervention room with this device and compare it against current clinical methods. METHODS: A male and female XCAT phantom, both with two respiratory profiles, were used to simulate various LSFs resulting from a scout dose of 150 MBq 99mTc-MAA. Hybrid images were Monte Carlo simulated for breath-hold (5 s) and dynamic breathing (10 frames of 0.5 s) acquisitions. Nuclear images were corrected for attenuation with the fluoroscopic image and for organ overlap effects using a pre-treatment CT-scan. For comparison purposes, planar scintigraphy and mobile gamma camera images (both 300 s acquisition time) were simulated. Estimated LSFs were evaluated for all methods and compared to the phantom ground truth. RESULTS: In the clinically relevant range of 10-20% LSF, hybrid imaging overestimated LSF with approximately 2 percentage points (pp) and 3 pp for the normal and irregular breathing phantoms, respectively. After organ overlap correction, LSF was estimated with a more constant error. Errors in planar scintigraphy and mobile gamma camera imaging were more dependent on LSF, body shape and breathing profile. CONCLUSION: LSF can be estimated with a constant minor error with a hybrid imaging device. Estimated LSF is highly dependent on true LSF, body shape and breathing pattern when estimated with current clinical methods. The hybrid imaging device is capable of accurately estimating LSF within a few seconds in an interventional setting.
Assuntos
Fluoroscopia/métodos , Pulmão/diagnóstico por imagem , Imagens de Fantasmas , Cintilografia/métodos , Compostos Radiofarmacêuticos/metabolismo , Tomografia Computadorizada por Raios X/métodos , Feminino , Câmaras gama , Humanos , Pulmão/metabolismo , Pulmão/patologia , Imageamento por Ressonância Magnética , Masculino , Método de Monte Carlo , Imagem MultimodalRESUMO
PURPOSE: X-ray-guided oncological interventions could benefit from the availability of simultaneously acquired nuclear images during the procedure. To this end, a real-time, hybrid fluoroscopic and nuclear imaging device, consisting of an X-ray c-arm combined with gamma imaging capability, is currently being developed (Beijst C, Elschot M, Viergever MA, de Jong HW. Radiol. 2015;278:232-238). The setup comprises four gamma cameras placed adjacent to the X-ray tube. The four camera views are used to reconstruct an intermediate three-dimensional image, which is subsequently converted to a virtual nuclear projection image that overlaps with the X-ray image. The purpose of the present simulation study is to evaluate the impact of gamma camera collimator choice (parallel hole versus pinhole) on the quality of the virtual nuclear image. METHODS: Simulation studies were performed with a digital image quality phantom including realistic noise and resolution effects, with a dynamic frame acquisition time of 1 s and a total activity of 150 MBq. Projections were simulated for 3, 5, and 7 mm pinholes and for three parallel hole collimators (low-energy all-purpose (LEAP), low-energy high-resolution (LEHR) and low-energy ultra-high-resolution (LEUHR)). Intermediate reconstruction was performed with maximum likelihood expectation-maximization (MLEM) with point spread function (PSF) modeling. In the virtual projection derived therefrom, contrast, noise level, and detectability were determined and compared with the ideal projection, that is, as if a gamma camera were located at the position of the X-ray detector. Furthermore, image deformations and spatial resolution were quantified. Additionally, simultaneous fluoroscopic and nuclear images of a sphere phantom were acquired with a physical prototype system and compared with the simulations. RESULTS: For small hot spots, contrast is comparable for all simulated collimators. Noise levels are, however, 3 to 8 times higher in pinhole geometries than in parallel hole geometries. This results in higher contrast-to-noise ratios for parallel hole geometries. Smaller spheres can thus be detected with parallel hole collimators than with pinhole collimators (17 mm vs 28 mm). Pinhole geometries show larger image deformations than parallel hole geometries. Spatial resolution varied between 1.25 cm for the 3 mm pinhole and 4 cm for the LEAP collimator. The simulation method was successfully validated by the experiments with the physical prototype. CONCLUSION: A real-time hybrid fluoroscopic and nuclear imaging device is currently being developed. Image quality of nuclear images obtained with different collimators was compared in terms of contrast, noise, and detectability. Parallel hole collimators showed lower noise and better detectability than pinhole collimators.
Assuntos
Fluoroscopia/métodos , Imagem Multimodal/métodos , Cintilografia/métodos , Artefatos , Fluoroscopia/instrumentação , Câmaras gama , Imagem Multimodal/instrumentação , Imagens de Fantasmas , Controle de Qualidade , Cintilografia/instrumentação , Razão Sinal-Ruído , Fatores de TempoRESUMO
BACKGROUND: Simultaneous real-time fluoroscopic and nuclear imaging could benefit image-guided (oncological) procedures. To this end, a hybrid modality is currently being developed by our group, by combining a c-arm with a gamma camera and a four-pinhole collimator. Accurate determination of the system parameters that describe the position of the x-ray tube, x-ray detector, gamma camera, and collimators is crucial to optimize image quality. The purpose of this study was to develop a calibration method that estimates the system parameters used for reconstruction. A multimodality phantom consisting of five point sources was created. First, nuclear and fluoroscopic images of the phantom were acquired at several distances from the image intensifier. The system parameters were acquired using physical measurement, and multimodality images of the phantom were reconstructed. The resolution and co-registration error of the point sources were determined as a measure of image quality. Next, the system parameters were estimated using a calibration method, which adjusted the parameters in the reconstruction algorithm, until the resolution and co-registration were optimized. For evaluation, multimodality images of a second set of phantom acquisitions were reconstructed using calibrated parameter sets. Subsequently, the resolution and co-registration error of the point sources were determined as a measure of image quality. This procedure was performed five times for different noise simulations. In addition, simultaneously acquired fluoroscopic and nuclear images of two moving syringes were obtained with parameter sets from before and after calibration. RESULTS: The mean FWHM was significantly lower after calibration than before calibration for 21 out of 25 point sources. The mean co-registration error was significantly lower after calibration than before calibration for all point sources. The simultaneously acquired fluoroscopic and nuclear images showed improved co-registration after calibration as compared with before calibration. CONCLUSIONS: A calibration method was presented that improves the resolution and co-registration of simultaneously acquired hybrid fluoroscopic and nuclear images by estimating the geometric parameter set as compared with a parameter set acquired by direct physical measurement.