Visible-Light-Driven CO2 Reduction with Homobimetallic Complexes. Cooperativity between Metals and Activation of Different Pathways.

Visible-light-driven reduction of CO2 to both CO and formate (HCOO-) was achieved in acetonitrile solutions using a homobimetallic Cu bisquaterpyridine complex. In the presence of a weak acid (water) as coreactant, the reaction rate was enhanced, and a total of ca. 766 TON (turnover number) was reached for the CO2 reduction, with 60% selectivity for formate and 28% selectivity for CO, using Ru(phen)32+ as a sensitizer and amines as sacrificial electron donors. Mechanistic studies revealed that with the help of cooperativity between two Cu centers, a bridging hydride is generated in the presence of a proton source (water) and further reacts with CO2 to give HCOO-. A second product, CO, was also produced in a parallel competitive pathway upon direct coordination of CO2 to the reduced complex. Mechanistic studies further allowed comparison of the observed reactivity to the monometallic Cu quaterpyridine complex, which only produced CO, and to the related homobimetallic Co bisquaterpyridine complex, that has been previously shown to generate formate following a mechanism not involving the formation of an intermediate hydride species.

Merging electrocatalytic alcohol oxidation with C-N bond formation by electrifying metal-ligand cooperative catalysts.

Electrification of thermal chemical processes could play an important role in creating a more energy efficient chemical sector. Here we demonstrate that a range of MLC catalysts can be successfully electrified and used for imine formation from alcohol precursors, thus demonstrating the first example of molecular electrocatalytic C-N bond formation.This novel concept allowed energy efficiency to be increased by an order of magnitude compared to thermal catalysis. Molecular EAO and the electrification of homogeneous catalysts can thus contribute to current efforts for the electrocatalytic generation of C-N bonds from simple building blocks.

Electrification of a Milstein-type catalyst for alcohol reformation.

Novel energy and atom efficiency processes will be keys to develop the sustainable chemical industry of the future. Electrification could play an important role, by allowing to fine-tune energy input and using the ideal redox agent: the electron. Here we demonstrate that a commercially available Milstein ruthenium catalyst (1) can be used to promote the electrochemical oxidation of ethanol to ethyl acetate and acetate, thus demonstrating the four electron oxidation under preparative conditions. Cyclic voltammetry and DFT-calculations are used to devise a possible catalytic cycle based on a thermal chemical step generating the key hydride intermediate. Successful electrification of Milstein-type catalysts opens a pathway to use alcohols as a renewable feedstock for the generation of esters and other key building blocks in organic chemistry, thus contributing to increase energy efficiency in organic redox chemistry.

Taming Electron Transfers: From Breaking Bonds to Creating Molecules.

The electron is the ultimate redox reagent to build and reshape molecular structures. Understanding and controlling the parameters underlying dissociative electron transfer (DET) reactivity and its coupling with proton transfer is crucial for combining selectivity, kinetics and energy efficiency in molecular chemistry. Reactivity understanding and mechanistic elements in DET processes are traced back and key examples of current research efforts are presented, demonstrating a large variety of applications. The involvement of DET pathways indeed encompasses a broad range of processes such as photoredox catalysis, CO2 reduction and alcohol oxidation. Interplay between these experimental examples and fundamental mechanistic study provides a powerful path to the understanding of driving force-rate relationships, which is crucial for the development of future generations of energy efficient catalytic schemes in redox organic chemistry.

Homogeneous Reforming of Aqueous Ethylene Glycol to Glycolic Acid and Pure Hydrogen Catalyzed by Pincer-Ruthenium Complexes Capable of Metal-Ligand Cooperation.

Glycolic acid is a useful and important α-hydroxy acid that has broad applications. Herein, the homogeneous ruthenium catalyzed reforming of aqueous ethylene glycol to generate glycolic acid as well as pure hydrogen gas, without concomitant CO2 emission, is reported. This approach provides a clean and sustainable direction to glycolic acid and hydrogen, based on inexpensive, readily available, and renewable ethylene glycol using 0.5 mol % of catalyst. In-depth mechanistic experimental and computational studies highlight key aspects of the PNNH-ligand framework involved in this transformation.

Hydrogenative Depolymerization of Nylons.

The widespread crisis of plastic pollution demands discovery of new and sustainable approaches to degrade robust plastics such as nylons. Using a green and sustainable approach based on hydrogenation, in the presence of a ruthenium pincer catalyst at 150 °C and 70 bar H2, we report here the first example of hydrogenative depolymerization of conventional, widely used nylons and polyamides, in general. Under the same catalytic conditions, we also demonstrate the hydrogenation of a polyurethane to produce diol, diamine, and methanol. Additionally, we demonstrate an example where monomers (and oligomers) obtained from the hydrogenation process can be dehydrogenated back to a poly(oligo)amide of approximately similar molecular weight, thus completing a closed loop cycle for recycling of polyamides. Based on the experimental and density functional theory studies, we propose a catalytic cycle for the process that is facilitated by metal-ligand cooperativity. Overall, this unprecedented transformation, albeit at the proof of concept level, offers a new approach toward a cleaner route to recycling nylons.

Iron Porphyrin Allows Fast and Selective Electrocatalytic Conversion of CO2 to CO in a Flow Cell.

Molecular catalysts have been shown to have high selectivity for CO2 electrochemical reduction to CO, but with current densities significantly below those obtained with solid-state materials. By depositing a simple Fe porphyrin mixed with carbon black onto a carbon paper support, it was possible to obtain a catalytic material that could be used in a flow cell for fast and selective conversion of CO2 to CO. At neutral pH (7.3) a current density as high as 83.7 mA cm-2 was obtained with a CO selectivity close to 98 %. In basic solution (pH 14), a current density of 27 mA cm-2 was maintained for 24 h with 99.7 % selectivity for CO at only 50 mV overpotential, leading to a record energy efficiency of 71 %. In addition, a current density for CO production as high as 152 mA cm-2 (>98 % selectivity) was obtained at a low overpotential of 470 mV, outperforming state-of-the-art noble metal based catalysts.

SO2 conversion to sulfones: development and mechanistic insights of a sulfonylative Hiyama cross-coupling.

A Pd-catalyzed Hiyama cross-coupling reaction using SO2 is described. The use of silicon-based nucleophiles leads to the formation of allyl sulfones under mild conditions with a broad functional group tolerance. Control experiments coupled with DFT calculations shed light on the key steps of the reaction mechanism, revealing the crucial role of a transient sulfinate anion.

Formamides as Isocyanate Surrogates: A Mechanistically Driven Approach to the Development of Atom-Efficient, Selective Catalytic Syntheses of Ureas, Carbamates, and Heterocycles.

Despite the hazardous nature of isocyanates, they remain key building blocks in bulk and fine chemical synthesis. By surrogating them with less potent and readily available formamide precursors, we herein demonstrate an alternative, mechanistic approach to selectively access a broad range of ureas, carbamates, and heterocycles via ruthenium-based pincer complex catalyzed acceptorless dehydrogenative coupling reactions. The design of these highly atom-efficient procedures was driven by the identification and characterization of the relevant organometallic complexes, uniquely exhibiting the trapping of an isocyanate intermediate. Density functional theory (DFT) calculations further contributed to shed light on the remarkably orchestrated chain of catalytic events, involving metal-ligand cooperation.

Ethylene Glycol as an Efficient and Reversible Liquid Organic Hydrogen Carrier.

Hydrogen has long been regarded as an ideal alternative clean energy vector to overcome the drawbacks of fossil technology. However, the direct utilization of hydrogen is challenging, due to low volumetric energy density of hydrogen gas and potential safety issues. Herein, we report an efficient and reversible liquid to liquid organic hydrogen carrier system based on inexpensive, readily available and renewable ethylene glycol. This hydrogen storage system enables the efficient and reversible loading and discharge of hydrogen using a ruthenium pincer complex, with a theoretical hydrogen storage capacity of 6.5 wt%.

Activation of SO2 by N/Si+ and N/B Frustrated Lewis Pairs: Experimental and Theoretical Comparison with CO2 Activation.

The guanidine 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) and the substituted derivatives [TBD-SiR2 ]+ and TBD-BR2 reacted with SO2 to give different FLP-SO2 adducts. Molecular structures, elucidated by X-ray diffraction, showed some structural similarities with the analogous CO2 adducts. Thermodynamic stabilities were both experimentally evidenced and computed through DFT calculations. The underlying parameters governing the relative stabilities of the different SO2 and CO2 adducts were discussed from a theoretical standpoint, with a focus on the influence of the Lewis acidic moiety.

Pyridine-Based PCP-Ruthenium Complexes: Unusual Structures and Metal-Ligand Cooperation.

Metal-ligand cooperation (MLC) by dearomatization/aromatization provides a unique way for bond activation, which has led to the discovery of various acceptorless dehydrogenative coupling reactions. However, most of the studies are based on pincer complexes with a central nitrogen donor. Aiming at exploration of the possibility of MLC by PCP-type pincer complexes, we report herein the synthesis, characterization, structure, and reactivity of pyridine-based PCP-Ru complexes. X-ray structures and DFT calculations indicate a carbenoid character of quaternized pyridine-based PCP-Ru complexes. These complexes undergo dearomatization by direct deprotonation, and the dearomatized complex can react with hydrogen, alcohols, or nitriles to regain aromatization via MLC.

C-C Bond Formation of Benzyl Alcohols and Alkynes Using a Catalytic Amount of KOt Bu: Unusual Regioselectivity through a Radical Mechanism.

We report a C-C bond-forming reaction between benzyl alcohols and alkynes in the presence of a catalytic amount of KOt Bu to form α-alkylated ketones in which the C=O group is located on the side derived from the alcohol. The reaction proceeds under thermal conditions (125 °C) and produces no waste, making the reaction highly atom efficient, environmentally benign, and sustainable. Based on our mechanistic investigations, we propose that the reaction proceeds through radical pathways.

Synthesis of Aromatic Sulfones from SO2 and Organosilanes Under Metal-free Conditions.

The conversion of SO2 into arylsulfones under metal-free conditions was achieved for the first time by reacting SO2 with (hetero)arylsilanes and alkylhalides in the presence of a fluoride source. The mechanism of this transformation was elucidated based on DFT calculations, which highlight the influence of SO2 in promoting C-Si bond cleavage.

CO2 Conversion into Esters by Fluoride-Mediated Carboxylation of Organosilanes and Halide Derivatives.

A one-step conversion of CO2 into heteroaromatic esters is presented under metal-free conditions. Using fluoride anions as promoters for the C-Si bond activation, pyridyl, furanyl, and thienyl organosilanes are successfully carboxylated with CO2 in the presence of an electrophile. The mechanism of this unprecedented reaction has been elucidated based on experimental and computational results, which show a unique catalytic influence of CO2 in the C-Si bond activation of pyridylsilanes. The methodology is applied to 18 different esters, and it has enabled the incorporation of CO2 into a polyester material for the first time.

Oxidative Addition of Haloheteroarenes to Palladium(0): Concerted versus SN Ar-Type Mechanism.

The kinetics of the oxidative additions of haloheteroarenes HetX (X=I, Br, Cl) to [Pd(0) (PPh3 )2 ] (generated from [Pd(0) (PPh3 )4 ]) have been investigated in THF and DMF and the rate constants have been determined. In contrast to the generally accepted concerted mechanism, Hammett plots obtained for substituted 2-halopyridines and solvent effects reveal a reaction mechanism dependent on the halide X of HetX: an unprecedented SN Ar-type mechanism for X=Br or Cl and a classical concerted mechanism for X=I. These results are supported by DFT studies.

Autocatalytic intermolecular versus intramolecular deprotonation in C-H bond activation of functionalized arenes by ruthenium(II) or palladium(II) complexes.

The activation of the C-H bond of 1-phenylpyrazole (2) and 2-phenyl-2-oxazoline (3) by [Ru(OAc)2(p-cymene)] is an autocatalytic process catalyzed by the co-product HOAc. The reactions are indeed faster in the presence of acetic acid and water but slower in the presence of a base K2CO3. A reactivity order is established in the absence of additives: 2-phenylpyridine>2-phenyl-2-oxazoline>1-phenylpyrazole (at RT). The accelerating effect of added acetate ions reveals an intermolecular deprotonation after C-H bond activation by a cationic Ru(II) center (SE 3 mechanism). The reactions of 1-phenylpyrazole and 2-phenyl-2-oxazoline first lead to the neutral cyclometalated complexes A2 and A3 ligated by one acetate. The latter dissociate to the cationic complexes B2(+) and B3(+), respectively, and acetate. A slow incorporation of one or two D atoms into 2, 3, and 2-phenylpyridine (1) was observed in the presence of deuterated acetic acid. The "reversibility" of the C-H bond activation/deprotonation takes place from the cationic complexes Bn(+) (n=1-3). They are also involved in oxidative additions to PhI, which are rate-determining and lead to the mono- and bis-phenylated products at high temperatures. A general mechanism is proposed for the arylation of arenes 1-3 catalyzed by [Ru(OAc)2(p-cymene)]. In contrast, the reaction of Pd(OAc)2 with 2-phenylpyridine (1), is much faster: Pd(OAc)2>[Ru(OAc)2(p-cymene)]. Since the kinetics is not affected by added acetates, the reaction proceeds through a CMD mechanism assisted by a ligated acetate (intramolecular process) and is irreversible. A bis-cyclometalated Pd(II)^Pd(II) dimer D'1 is formed whose bielectronic electrochemical oxidation leads to a [Pd(III)^Pd(III)](2+) dimer, in agreement with the result of a reported chemical oxidation used in arene functionalizations catalyzed by Pd(OAc)2.