Tissue chips as headway model and incitement technology.

Tissue on a chip or organ-on-chip (OOC) is a technology that's dignified to form a transformation in drug discovery through the use of advanced platforms. These are 3D in-vitro cell culture models that mimic micro-environment of human organs or tissues on artificial microstructures built on a portable microfluidic chip without involving sacrificial humans or animals. This review article aims to offer readers a thorough and insightful understanding of technology. It begins with an in-depth understanding of chip design and instrumentation, underlining its pivotal role and the imperative need for its development in the modern scientific landscape. The review article explores into the myriad applications of OOC technology, showcasing its transformative impact on fields such as radiobiology, drug discovery and screening, and its pioneering use in space research. In addition to highlighting these diverse applications, the article provides a critical analysis of the current challenges that OOC technology faces. It examines both the biological and technical limitations that hinder its progress and efficacy and discusses the potential advancements and innovations that could drive the OOC technology forward. Through this comprehensive review, readers will gain a deep appreciation of the significance, capabilities, and evolving landscape of OOC technology.

Approaches to Prosthetic Limb Restoration in Resource-Limited Settings/Countries: 3 Dimensional Printing.

Much of the burden of living with a disability is concentrated among those populations least financially able to bear the burden. As the price of 3 dimensional (3D) printing decreases, individual access to this technology increases. 3D-printed prostheses can be designed specifically for use in resource-poor settings, including developing countries, to minimize the cost of consumable parts while optimizing durability in harsh environmental conditions.

East Victoria long term hydrodynamic modelling: Dataset and methodology.

This dataset is the output of a long term multi-resolution calibrated hydrodynamic model of Bass Strait waters in south-eastern Australia. The model is 3 dimensional with 16 sigma layers. It is forced by tides, wind, non-tidal sea level variability as well as salinity and temperature through a nudging scheme. The model was calibrated against existing data from previous fixed location instrument deployments and hull mounted ADCP data. While the model has limitations, it performs well against measured data and provides a useful tool for describing spatially varying currents throughout East Victorian waters.

Transapical Transcatheter Aortic Valve Replacement Under 3-Dimensional Guidance to Treat Pure Aortic Regurgitation in Patients with a Large Aortic Annulus.

Background: Transcatheter aortic valve replacement (TAVR) is a challenge for patients with aortic regurgitation (AR) and a large annulus. Our goal was to evaluate the clinical outcomes and predictors of transapical TAVR in AR patients with a large annulus and noncalcification and the feasibility and safety of 3-dimensional printing (3DP) in the preprocedural simulation. Methods: Patients with a large annulus (diameter >29 mm) were enrolled and divided into the simulation (n = 43) and the nonsimulation group (n = 82). Surgeons used the specific 3DP model of the simulation group to simulate the main steps before the procedure and to refit the transcatheter heart valve (THV) according to the simulated results. Results: The average annular diameter of the overall cohort was 29.8 ± 0.7 mm. Compared with the nonsimulation group, the simulation group used a higher proportion of extra oversizing for THVs (97.6% vs. 85.4%, p = 0.013), and the coaxiality performance was better (9.7 ± 3.9° vs. 12.7 ± 3.8°, p < 0.001). Both THV displacement and ≥ mild paravalvular leakage (PVL) occurred only in the nonsimulation group (9.8% vs. 0, p < 0.001; 9.8% vs. 0, p < 0.001). Multivariate regression analysis showed that extra oversizing, coaxial angle and annulus diameter were independent predictors of THV displacement and ≥ mild PVL, respectively. Conclusions: Based on 3DP guidance, transapical TAVR using extra oversizing was safe and feasible for patients with noncalcified AR with a large annulus. Extra oversizing and coaxial angle were predictors of postprocedural THV displacement and ≥ mild PVL in such patients.

Immersive 3-Dimensional Visualization Aids Transcatheter Management of a Patient With Multiple Pulmonary Arteriovenous Malformations.

Cutting-edge 3-dimensional technologies like 3-dimensional printing and extended reality visualization provide novel, immersive ways to understand and interact with volumetric medical imaging data for preprocedural planning. We present a case that illustrates the utility of these techniques in a patient requiring a complex transcatheter intervention.

Trunk-to-leg volume and appendicular lean mass from a commercial 3-dimensional optical body scanner for disease risk identification.

BACKGROUND & AIMS: Body shape expressed as the trunk-to-leg volume ratio is associated with diabetes and mortality due to the associations between higher adiposity and lower lean mass with Metabolic Syndrome (MetS) risk. Reduced appendicular muscle mass is associated with malnutrition risk and age-related frailty, and is a risk factor for poor treatment outcomes related to MetS and other clinical conditions (e.g.; cancer). These measures are traditionally assessed by dual-energy X-ray absorptiometry (DXA), which can be difficult to access in clinical settings. The Shape Up! Adults trial (SUA) demonstrated the accuracy and precision of 3-dimensional optical imaging (3DO) for body composition as compared to DXA and other criterion measures. Here we assessed whether trunk-to-leg volume estimates derived from 3DO are associated with MetS risk in a similar way as when measured by DXA. We further explored if estimations of appendicular lean mass (ALM) could be made using 3DO to further improve the accessibility of measuring this important frailty and disease risk factor. METHODS: SUA recruited participants across sex, age (18-40, 40-60, >60 years), BMI (under, normal, overweight, obese), and race/ethnicity (non-Hispanic [NH] Black, NH White, Hispanic, Asian, Native Hawaiian/Pacific Islander) categories. Each participant had whole-body DXA and 3DO scans, and measures of cardiovascular health. The 3DO measures of trunk and leg volumes were calibrated to DXA to express equivalent trunk-to-leg volume ratios. We expressed each blood measure and overall MetS risk in quartile gradations of trunk-to-leg volume previously defined by National Health and Nutrition Examination Survey (NHANES). Finally, we utilized 3DO measures to estimate DXA ALM using ten-fold cross-validation of the entire dataset. RESULTS: Participants were 502 (273 female) adults, mean age = 46.0 ± 16.5y, BMI = 27.6 ± 7.1 kg/m2 and a mean DXA trunk-to-leg volume ratio of 1.47 ± 0.22 (females: 1.43 ± 0.23; males: 1.52 ± 0.20). After adjustments for age and sex, each standard deviation increase in trunk-to-leg volume by 3DO was associated with a 3.3 (95% odds ratio [OR] = 2.4-4.2) times greater risk of MetS, with individuals in the highest quartile of trunk-to-leg at 27.4 (95% CI: 9.0-53.1) times greater risk of MetS compared to the lowest quartile. Risks of elevated blood biomarkers as related to high 3DO trunk-to-leg volume ratios were similar to previously published comparisons using DXA trunk-to-leg volume ratios. Estimated ALM by 3DO was correlated to DXA (r2 = 0.96, root mean square error = 1.5 kg) using ten-fold cross-validation. CONCLUSION: Using thresholds of trunk-to-leg associated with MetS developed on a sample of US-representative adults, trunk-to-leg ratio by 3DO after adjustments for offsets showed significant associations to blood parameters and MetS risk. 3DO scans provide a precise and accurate estimation of ALM across the range of body sizes included in the study sample. The development of these additional measures improves the clinical utility of 3DO for the assessment of MetS risk as well as the identification of low muscle mass associated with poor cardiometabolic and functional health.

How to improve ZMC fracture reconstruction due to severe enophthalmos.

INTRODUCTION AND IMPORTANCE: Zygomaticomaxillary (ZMC) fractures are common, often resulting from traffic accidents, and account for 17 % of facial fractures. These fractures can lead to issues such as enophthalmos, flattened cheeks, diplopia, maxillary hypoesthesia. If the reduction is inadequate to restore facial structure, long term-functional and aesthetic complications may arise. In such cases a computed tomography (CT) scan with 3-dimensional (3D) reconstruction is valuable to assessing the fracture and planning surgery, with current technological advancements, 3D printing can now be utilized for this purpose. PRESENTATION OF CASE: A 24-year-old male, after a motorcycle accident and initial surgery for maxillofacial fractures, experienced persistent diplopia and facial numbness. Physical examination showed malpositioning of the right eye, and a CT scan with 3D reconstruction revealed multiple fractures and prior internal fixation. A 3D-printed model was created to plan a second surgery using rib cartilage and a silicone orbital base for orbital rim reconstruction. Post-surgery, the patient reported minimal pain and no diplopia or blurred vision in the primary gaze position. CLINICAL DISCUSSIONS: 3D printing is beneficial in facial reconstruction, aiding in surgical planning by allowing precise measurement and design of graft. Rib cartilage can serve as an alternative for orbital rim reconstruction, and 3D printing facilitates accurate harvesting of the rib. CONCLUSION: In cases of severe ZMC fracture, 3D printing was utilized as a guide during surgical preparation to achieve improved outcomes.

Establishing complexity targets to enhance artificial reef designs.

Artificial reefs (AR), which are integral tools for fish management, ecological reconciliation and restoration efforts, require non-polluting materials and intricate designs that mimic natural habitats. Despite their three-dimensional complexity, current designs nowadays rely on empirical methods that lack standardised pre-immersion assessment. To improve ecosystem integration, we propose to evaluate 3-dimensional Computer-aided Design (3D CAD) models using a method inspired by functional ecology principles. Based on existing metrics, we assess geometric (C-convexity, P-packing, D-fractal dimension) and informational complexity (R-specific richness, H- diversity, J-evenness). Applying these metrics to different reefs constructed for habitat protection, biomass production and bio-mimicry purposes, we identify potential complexity target points (CTPs). This method provides a framework for improving the effectiveness of artificial reef design by allowing for the adjustment of structural properties. These CTPs represent the first step in enhancing AR designs. We can refine them by evaluating complexity metrics derived from 3D reconstructions of natural habitats to advance bio-mimicry efforts. In situ, post-immersion studies can help make the CTPs more specific for certain species of interest by exploring complexity-diversity or complexity-species distribution relationships at the artificial reef scale.

A novel implant placement technique using a three-dimensionally printed duplicate denture for implant-supported overdenture in patients with severe residual ridge resorption: A case report.

The treatment method of placing a small number of implants in the mandible as a removable implant-supported overdenture (IOD) enables implant placement and denture stability, even in cases with severe residual ridge resorption. In this case report, a new implant placement technique was performed using a three-dimensionally (3D)-printed duplicate denture fabricated by a 3D printer, resulting in the restoration of masticatory function through IOD.

A 3-Dimensional Morphometric Analysis of 4 Midsagittal Planes for CT Scan Reference Determination in Children with Syndromic Craniosynostosis.

OBJECTIVE: To identify the suitable and practical midsagittal plane (MSP) reference for computed tomography (CT) scan skull analysis in patients with syndromic craniosynostosis. DESIGN: Retrospective study. SETTING: Tertiary referral hospital. PATIENTS AND PARTICIPANTS: A total of 19 full skull CT scans of syndromic craniosynostosis patients. METHODS: Seven craniofacial landmarks located on the midline and 4 MSPs that was previously published and clinically recognized (Planes: SPBaS, SPNSANS, SPLOrPo and SPZFTP) were constructed from the CT images. The absolute distance of every plane from 7 landmarks were then calculated. These distances were subsequently subjected to statistical analysis. MAIN OUTCOME MEASURE(S): The absolute distance of different MSPs from 7 landmarks. RESULTS: The distances of landmarks measured to SPBaS were the highest, with the most prominent fluctuation. The fluctuation of the SPNSANS, SPLOrPo and SPZFTP had similar direction changes, with the latter being the closest. Pairwise comparisons demonstrated statistical differences (P < .008 using the Bonferroni correction) between the measured distances of A point (M = 0.25, SD = 0.16) and B point (M = 2.21, SD = 1.6) to SPNSANS. There were statistical significances between distances of B point (M = 1.68, SD = 1.07) and CG point (M = 0.55, SD = 0.37) to SPZFTP plane. There was no statistical significance on each landmark to SPLOrPo. CONCLUSIONS: The study demonstrates that SPBaS is not recommended for MSP reference. While SPNSANS should be carefully selected, the application of SPLOrPo and SPZFTP are interchangeable, with the SPZFTP plane slightly exaggerating the mandible deviation relative to the superior and posterior of the midface.

Left atrial mitral valve cord: Unveiling complexity through advanced 3D TEE imaging - A case report.

This case report explores the left atrial mitral valve cord, an extremely rare congenital anomaly. Typically involving mitral valve leaflets and associated with mild mitral regurgitation, it is rarely documented independently. A 51-year-old patient presented with dizziness, and diagnostic challenges arose during transthoracic echocardiography (TTE). Advanced 3-dimensional transesophageal echocardiography (3D TEE) proved invaluable for accurate mapping, revealing a unique, unattached left atrial mitral valve cord.

Evaluation of dentoalveolar changes following maxillary incisor intrusion with one vs two anterior miniscrews in subjects with gummy smile: a randomized clinical trial.

OBJECTIVES: To examine dentoalveolar changes following intrusion of maxillary incisors with one or two anterior miniscrews in subjects with gummy smile and deep bite. MATERIALS AND METHODS: Forty-three subjects were selected and divided into two groups: group I (22 subjects: 15 women, 7 men; mean age 30 ± 10 years) received one miniscrew between the upper central incisors, and group II (21 subjects: 16 women, 5 men; mean age 30 ± 10 years) received two miniscrews between the canines and lateral incisors. Dentoalveolar parameters, including amount of intrusion, root resorption, incisor inclination, alveolar bone thickness, and buccal alveolar crest height (cementoenamel junction to labial alveolar crest), were evaluated using cone-beam computed tomography scans obtained before and after intrusion. The intergroup comparison was analyzed using a paired t-test and unpaired t-test to determine significant changes within and between groups. RESULTS: The amount of intrusion was significantly greater in group II than in group I (P < .05). No statistically significant differences were found between groups I and II for changes in incisor inclination, labial bone thickness, and buccal alveolar crest height (P > .05). CONCLUSIONS: Maxillary central and lateral incisor intrusion was significantly greater in subjects treated with two miniscrews. Root resorption of the maxillary central incisors was notably greater in subjects with one miniscrew, while maxillary lateral incisor resorption was greater in subjects treated with two miniscrews.

A new method to orient a 3-dimensional facial model to natural head position: A preliminary report on accuracy and reproducibility.

OBJECTIVES: To establish and validate a novel method to orient a 3-dimensional (3D) facial model to natural head position (NHP) in a stereophotogrammetric system using a 2-dimensional frontal full-face photograph of NHP. MATERIAL AND METHODS: Specific technique procedure was reported for our method, and in vitro model experiment was performed for accuracy test. A preliminary volunteer study was then planned for reproducibility test. RESULTS: The accuracy on a 3D-printed test model was within 0.15°. Within an observational cohort of 22 dental students, the angular deviations of different maxillofacial regions (e.g., central forehead, left and right zygomatic regions, apex of nose and mental region) were no more than 2° between the 3D NHP models acquired with a shorter time-interval (1 h from baseline) or a longer time-interval (7 days from baseline), which were all considered clinically insignificant. In addition, the angular deviations were significantly larger with a 7d-interval than with a 1h-interval, indicting a decline in 3D NHP reproducibility over short time duration. CONCLUSION: The current method may represent a clinically useful protocol for recording and transferring 3D NHP in stereophotogrammetry. CLINICAL RELEVANCE: It may provide reliable and meaningful reference information for evaluating craniofacial morphology, and be of clinical use in the diagnosis, treatment and follow-ups of patients with aesthetic or deformed craniofacial problems.

Cell fate simulation reveals cancer cell features in the tumor microenvironment.

To elucidate the dynamic evolution of cancer cell characteristics within the tumor microenvironment (TME), we developed an integrative approach combining single-cell tracking, cell fate simulation, and 3D TME modeling. We began our investigation by analyzing the spatiotemporal behavior of individual cancer cells in cultured pancreatic (MiaPaCa2) and cervical (HeLa) cancer cell lines, with a focus on the α2-6 sialic acid (α2-6Sia) modification on glycans, which is associated with cell stemness. Our findings revealed that MiaPaCa2 cells exhibited significantly higher levels of α2-6Sia modification, correlating with enhanced reproductive capabilities, whereas HeLa cells showed less prevalence of this modification. To accommodate the in vivo variability of α2-6Sia levels, we employed a cell fate simulation algorithm that digitally generates cell populations based on our observed data while varying the level of sialylation, thereby simulating cell growth patterns. Subsequently, we performed a 3D TME simulation with these deduced cell populations, considering the microenvironment that could impact cancer cell growth. Immune cell landscape information derived from 193 cervical and 172 pancreatic cancer cases was used to estimate the degree of the positive or negative impact. Our analysis suggests that the deduced cells generated based on the characteristics of MiaPaCa2 cells are less influenced by the immune cell landscape within the TME compared to those of HeLa cells, highlighting that the fate of cancer cells is shaped by both the surrounding immune landscape and the intrinsic characteristics of the cancer cells.

Examination of a practical method to quantitatively evaluate the rolling over movement in a clinical setting.

[Purpose] We investigated the utility of wearable inertial and magnetic sensing modules for analyzing neck and trunk movements during the rolling over movement. [Participants and Methods] The participants were instructed to roll over from the supine to the side-lying position with three sensor units attached to their forehead, xiphoid process of the sternum, and abdomen. Experiments were conducted on two prescribed patterns: one emphasizing hip joint flexion and adduction, and the other focusing on scapular protraction and horizontal shoulder joint adduction in two healthy participants (one male and one female). The flexion and rotation angles of the neck and trunk were calculated using conventional spreadsheet software with data obtained from the sensors. The obtained values were compared for agreement with those derived from a three-dimensional (3D) motion analysis device. [Results] The cross-correlation coefficient for the flexion and rotation angles of the neck and trunk between the two measurement methods was approximately 0.85, and the root mean square (RMS) angle difference was approximately 5.0°. [Conclusion] Wearable inertial and magnetic sensors can be used to quantitatively evaluate neck and trunk movements during the rolling over movement.

Impact of the Aortomitral Positional Anatomy on Atrioventricular Conduction Disorder Following Mitral Valve Surgery.

BACKGROUND: Variations in the aortomitral positional anatomy, including aortic root rotation appear to be related to variations in the location of the conduction system, including the bundle of His. However, little is known about their clinical significance. METHODS AND RESULTS: This study included 147 patients with normal ECGs who underwent mitral valve surgery. The aortomitral anatomy was classified using preoperative 3-dimensional transesophageal echocardiography, and postoperative conduction disorders, including atrioventricular block and bundle branch block, were analyzed. Variations classified as aortomitral appearance were designated as having a center appearance (85.7%, n=126/147) or lateral appearance (14.3%, n=21/147) on the basis of whether the aortic root was located at the center or was shifted to the left fibrous trigone side. Subsequently, those with a center appearance, aortic root rotation was classified as having a center rotation (83.3% [n=105/126]), in which the commissure of the left and noncoronary aortic leaflet was located at the center, lateral rotation (14.3% [n=18/126]), rotated to the left trigone side, or medial rotation (2.4% [n=3/126]), rotated to the right. The incidence of 3-month persistent new-onset conduction disorder was higher in the lateral appearance than the center appearance group (21.1% versus 5.0%; P=0.031) and higher in the lateral rotation than in the center or medial rotation groups (29.4% versus 1.0% versus 0.0%, respectively; P<0.001). CONCLUSIONS: Aortomitral variations can be classified using 3-dimensional transesophageal echocardiography. Lateral appearance and lateral rotation are risk factors for conduction disorders in mitral valve surgery.

Triple digital guides for implant-supported restorations with alveoloplasty procedure in the esthetic zone.

OBJECTIVE: The principal aim of this report is to address the challenge of integrating prosthetic crowns with natural dentition in the esthetic zone. It highlights the utilization of a prosthetically driven treatment plan, designed to ensure predictable esthetic outcomes. CLINICAL CONSIDERATIONS: This report details a technique that utilizes three digital guides, all derived from a 3-dimensional digital smile design. The integration of a restoration guide, an implant drilling guide, and an alveoloplasty guide is described. These tools collectively facilitate the precise execution of both surgical and prosthetic procedures, enhancing treatment accuracy and esthetic integration. CONCLUSIONS: This technique considers the esthetic prosthetic crowns, implant positions, and alveoloplasty collectively. It enhances the predictability of esthetic outcomes in oral implantology and potentially provides an integrated prosthetically driven workflow in cosmetic dental treatments. CLINICAL SIGNIFICANCE: The application of multiple digital guides derived from the same prosthetically driven treatment significantly enhances the predictability of esthetic outcomes in oral implantology.

Role of surgery in the treatment of pediatric low-grade glioma with various degrees of brain stem involvement.

OBJECTIVE: Posterior fossa pediatric low-grade glioma involving the brainstem and cerebellar peduncles (BS-pLGG) are a subgroup with higher risks at surgery. We retrospectively analyzed the role of surgery in the interdisciplinary armamentarium of treatment options in our institutional series of BS-pLGG with various degrees of brainstem involvement. MATERIAL AND METHODS: We analyzed data of 52 children with BS-pLGG after surgical intervention for clinical/molecular characteristics, neurological outcome, factors influencing recurrence/progression pattern, and tumor volumetric analysis of exclusively surgically treated patients to calculate tumor growth velocity (TGV). Tumors were stratified according to primary tumor origin in four groups: (1) cerebellar peduncle, (2) 4th ventricle, (3) pons, (4) medulla oblongata. RESULTS: The mean FU was 6.44 years. Overall survival was 98%. The mean PFS was 34.07 months. Two patients had biopsies only. Fifty-two percent of patients underwent remission or remained in stable disease (SD) after initial surgery. Patients with progression underwent further 23 resections, 15 chemotherapies, 4 targeted treatments, and 2 proton radiations. TGV decreased after the 2nd surgery compared to TGV after the 1st surgery (p < 0.05). The resection rates were significantly higher in Groups 1 and 2 and lowest in medulla oblongata tumors (Group 4) (p < 0.05). More extended resections were achieved in tumors with KIAA1549::BRAF fusion (p = 0.021), which mostly occurred in favorable locations (Groups 1 and 2). Thirty-one patients showed postoperatively new neurological deficits. A total of 27/31 improved within 12 months. At the end of FU, 6% had moderate deficits, 52% had mild deficits not affecting activities, and 36% had none. Fifty percent of patients were free of disease or showed remission, 38% were in SD, and 10% showed progression. CONCLUSION: The first surgical intervention in BS-pLGG can control disease alone in overall 50% of cases, with rates differing greatly according to location (Groups 1 > 2 > 3 > 4), with acceptable low morbidity. The second look surgery is warranted except in medullary tumors. With multimodality treatments almost 90% of patients can obtain remission or stable disease after > 5 years of follow-up. An integrated multimodal and multidisciplinary approach aiming at minimal safe residual disease, combining surgery, chemo-, targeted therapy, and, as an exception, radiation therapy, is mandatory.

Deciphering the divergent transcriptomic landscapes of cervical cancer cells grown in 3D and 2D cell culture systems.

Cervical cancer remains a significant health challenge for women worldwide, with a disproportionate impact on developing regions like sub-Saharan Africa. Taking advantage of recent advancements in developing suitable preclinical models to study cell proliferation, differentiation, and gene expression, we used RNA sequencing to compare the transcriptomic profiles of SiHa cervical cancer cells grown in 3D versus 2D culture systems. Pathway analysis of 3D cultures revealed upregulation of immune activation, angiogenesis, and tissue remodeling pathways. The high expression of cytokines, chemokines, matrix metalloproteinases, and immediate early genes, suggests that 3D cultures replicate the tumor microenvironment better than 2D monolayer cultures. HPV gene expression analysis further demonstrated higher expression levels of HPV16 E1, E2, E6, and E7 genes in 3D versus 2D cultures. Further, by using a set of linear models, we identified 79 significantly differentially expressed genes in 3D culture compared to 2D culture conditions, independent of HPV16 viral gene effects. We subsequently validated five of these genes at the protein level in both the SiHa cell line and a newly developed, patient-derived cervical cancer cell line. In addition, correlation analysis identified 26 human genes positively correlated with viral genes across 2D and 3D culture conditions. The top five 3D versus 2D differentially expressed and HPV-correlated genes were validated via qRT-PCR in our patient derived cell line. Altogether, these findings suggest that 3D cultures provide superior model systems to explore mechanisms of immune evasion, cancer progression and antiviral therapeutics.

False-Profile Radiograph Sourcil-Edge and Bone-Edge Measurements Correlate to Different Weightbearing Regions of the Acetabulum: A 3-Dimensional Analysis.

BACKGROUND: The acetabular sourcil is commonly interpreted as a reliable radiographic representation of the weightbearing dome of the acetabulum, despite limited modern data. Assessment of weightbearing acetabular coverage has been described using both the sourcil edge and bone edge as anatomic landmarks, leading to confusion and potential misguidance in surgical decision-making and thus compromised patient outcomes. PURPOSE/HYPOTHESIS: The purpose of this study was to characterize the 3-dimensional (3D) anatomic correlates of the sourcil-edge and bone-edge radiographic measurements on false-profile radiographs. It was hypothesized that the sourcil edge would represent anterolateral coverage and the bone edge would represent anterior coverage. STUDY DESIGN: Descriptive laboratory study. METHODS: A total of 80 hips were grouped by large or small differences between bone-edge and sourcil-edge anterior center-edge angles, based on upper and lower quartiles of discrepancy. Three-dimensional surface mesh models and digitally reconstructed radiographs were generated from hip computed tomography scans. Sourcil-edge and bone-edge anterior center-edge angles were identified on digitally reconstructed radiographs and registered to the 3D models with fiducial markers. Intersections of bone-edge and sourcil-edge projection lines with the acetabular rim were obtained from the 3D models. RESULTS: The bone-edge and sourcil-edge projections intersected the acetabular rim at clockface means of 2:05 ± 0:22 and 1:12 ± 0:25, respectively. The 3D models consistently demonstrated that, in both large- and small-discrepancy groups, the sourcil edge corresponded to the acetabular area just posterior to the anterior inferior iliac spine (AIIS) projection, and the bone edge corresponded to the weightbearing region inferior to the AIIS. Additionally, in large-discrepancy hips, the bone edge corresponded to more prominent acetabular coverage in the region inferomedial to the AIIS when compared with the small-discrepancy hips. CONCLUSION: On false-profile radiographs, the sourcil edge corresponds to superior femoral head coverage, and the bone edge corresponds to anterosuperior coverage. Radiographs with a large discrepancy between sourcil-edge and bone-edge measurements demonstrate acetabular rim prominence in the region of the AIIS. CLINICAL RELEVANCE: Characterizing the anatomic weightbearing regions of the acetabulum represented on false-profile radiographs facilitates improved clinical and intraoperative decision-making in hip preservation surgery, including acetabuloplasty and periacetabular osteotomy.