Robot-assisted hemihepatectomy is superior to laparoscopic hemihepatectomy through dorsal approach: A propensity score-matched study (with videos).

BACKGROUND: Dorsal approach is the potentially effective strategy for minimally invasive liver resection. This study aimed to compare the outcomes between robot-assisted and laparoscopic hemihepatectomy through dorsal approach. METHODS: We compared the patients who underwent robot-assisted hemihepatectomy (Rob-HH) and who had laparoscopic hemihepatectomy (Lap-HH) through dorsal approach between January 2020 and December 2022. A 1:1 propensity score-matching (PSM) analysis was performed to minimize bias and confounding factors. RESULTS: Ninety-six patients were included, 41 with Rob-HH and 55 with Lap-HH. Among them, 58 underwent left hemihepatectomy (LHH) and 38 underwent right hemihepatectomy (RHH). Compared with Lap-HH group, patients with Rob-HH had less estimated blood loss (median: 100.0 vs. 300.0 mL, P = 0.016), lower blood transfusion rates (4.9% vs. 29.1%, P= 0.003) and postoperative complication rates (26.8% vs. 54.5%, P = 0.016). These significant differences consistently existed after PSM and in the LHH subgroups. Furthermore, robot-assisted LHH was associated with decreased Pringle duration (45 vs. 60 min, P = 0.047). RHH subgroup analysis showed that compared with Lap-RHH, Rob-RHH was associated with less estimated blood loss (200 vs. 400 mL, P = 0.013). No significant differences were found in other perioperative outcomes among pre- and post-PSM cohorts, such as Pringle duration, operative time, and hospital stay. CONCLUSIONS: The dorsal approach was a safe and feasible strategy for hemi-hepatectomy with favorable outcomes under robot-assisted system in reducing intraoperative blood loss, transfusion, and postoperative complications.

The External Carotid Artery and the Styloid Process.

BACKGROUND: The external carotid artery (ECA) is typically regarded as coursing between the styloid muscles to continue into the parotid space. The anatomical possibility of an ECA with an ascending parapharyngeal trajectory continuing posteriorly to an elongated styloid process (ESP), thus retrostyloid, to the parotid space is overlooked. It was, therefore, aimed to document the prevalence of this retrostyloid variant of the ECA's course. METHODS: We investigated a retrospective random cohort of 160 archived CT angiograms of 97 males and 63 females aged between 47 and 76. The presence of an ESP and the retrostyloid course of the ECA were bilaterally documented. RESULTS: An ESP was identified in 99/320 sides (30.94%), regardless of the ECA course. In the overall group, we obtained 35% null cases for the two variables on the right and 34.06% for the left. ESPs were identified in 8.75% on the right side and 10.31% on the left. The ECAs had retrostyloid courses in 6.25% on the right side and 5.63% on the left. Thus, of the 320 ECAs documented on both sides, 221 (69.06%) had no retrostyloid courses, and we did not identify any ESP in those cases. ESPs were detected in 19.06% of the sides but without retrostyloid ECAs, and retrostyloid courses of the ECAs were detected in 11.88%. CONCLUSIONS: The possibility of a retrostyloid course of the ECA should not be ignored. An ESP may misinform the surgeon about the main carotid artery located immediately deep to it.

Clinical validity and precision of deep learning-based cone-beam computed tomography automatic landmarking algorithm.

Purpose: This study was performed to assess the clinical validity and accuracy of a deep learning-based automatic landmarking algorithm for cone-beam computed tomography (CBCT). Three-dimensional (3D) CBCT head measurements obtained through manual and automatic landmarking were compared. Materials and Methods: A total of 80 CBCT scans were divided into 3 groups: non-surgical (39 cases); surgical without hardware, namely surgical plates and mini-screws (9 cases); and surgical with hardware (32 cases). Each CBCT scan was analyzed to obtain 53 measurements, comprising 27 lengths, 21 angles, and 5 ratios, which were determined based on 65 landmarks identified using either a manual or a 3D automatic landmark detection method. Results: In comparing measurement values derived from manual and artificial intelligence landmarking, 6 items displayed significant differences: R U6CP-L U6CP, R L3CP-L L3CP, S-N, Or_R-R U3CP, L1L to Me-GoL, and GoR-Gn/S-N (P<0.05). Of the 3 groups, the surgical scans without hardware exhibited the lowest error, reflecting the smallest difference in measurements between human- and artificial intelligence-based landmarking. The time required to identify 65 landmarks was approximately 40-60 minutes per CBCT volume when done manually, compared to 10.9 seconds for the artificial intelligence method (PC specifications: GeForce 2080Ti, 64GB RAM, and an Intel i7 CPU at 3.6 GHz). Conclusion: Measurements obtained with a deep learning-based CBCT automatic landmarking algorithm were similar in accuracy to values derived from manually determined points. By decreasing the time required to calculate these measurements, the efficiency of diagnosis and treatment may be improved.

Arcuate anterior jugular vein: a rare case report and its clinical relevance.

OBJECTIVE: The present study describes a rare anatomical variation of the anterior jugular vein (AJV) and discusses its clinical relevance. METHODS: A head and neck specimen fixed in 10% formaldehyde from a 42-year-old female cadaver was submitted to angio technique with pre-vulcanized latex and water-soluble ink. During a routine dissection for the discipline of topographic anatomy, the presence of an arcuate AJV was detected in the anterior triangle of the neck. RESULTS: An arcuate AJV was formed by the confluence of the submental and facial veins in the left submandibular region, which presented a complex network of anastomoses superficially to the left submandibular gland. After its origin, this vessel curved to the right at the level of the laryngeal prominence and followed the medial border of the right sternohyoid muscle to flow into the right AJV. In this topography, the arcuate AJV was located between the sternocleidomastoid muscle's anterior margin and the thyroid gland's right lobe. The presence of anastomoses between the two AJVs communicating the submandibular triangles was not detected. CONCLUSION: The arcuate AJV is a relevant anatomical variant in the superficial venous drainage of the neck that should be known by head and neck surgeons and radiologists to avoid surgical iatrogenic events.

Planning for complex inferior vena cava filter retrievals: the implementation and effectiveness of 3D printed models.

BACKGROUND: Inferior vena cava filter (IVC) retrieval is most often routine but can be challenging with high morbidity in complex cases, especially those with an extended dwelling time. While risk of morbidity in complex retrievals is decreased with advanced filter retrieval techniques, deciding when and which to use these requires detailed pre-procedural planning. The purpose of our study was to evaluate patient-specific 3D printed anatomic IVC filter models for aiding complex IVC filter retrievals. METHODS: All IVC filter retrieval patients between June 2021 and September 2022 at one academic medical hospital were prospectively screened. Nine met criteria for complex retrieval, and their CT images were used to 3D print patient-specific IVC and filter models. Models were used in pre-procedural planning and clinical utility was assessed using the Anatomic Model Utility Likert Questionnaire and estimations of the procedural and fluoroscopy time saved. RESULTS: The usage of 3D printed models in pre-procedural planning had high clinical utility based on the Likert questionnaire (Anatomic Model Utility Points 366.7 ± 103.1). Using a model significantly increased confidence in planning (p = 0.03) and modified the treatment plan in seven cases. It also led to cost-efficient use of resources in the procedure suite with estimated reduction in procedure and fluoroscopy time of 29.0 [20.3] (p = 0.003) and 10.2 [6.7] (p = 0.002) minutes, respectively. CONCLUSION: 3D printed anatomic models for patients who require complex IVC filter retrieval demonstrated Likert-based high clinical utility and led to estimated reductions of procedural and fluoroscopy time.

Creation of a replicable anatomic model of terrible triad of the elbow.

BACKGROUND: Terrible triad of the elbow (TTE) is a complex dislocation associating radial head (RH) and coronoid process (CP) fractures. There is at present no reproducible anatomic model for TTE, and pathophysiology is unclear. The main aim of the present study was to create and validate an anatomic model of TTE. Secondary objectives were to assess breaking forces and relative forearm rotation with respect to the humerus before dislocation. METHODS: An experimental comparative study was conducted on 5 fresh human specimens aged 87.4 ± 8.6 years, testing 10 upper limbs. After dissection conserving the medial and lateral ligaments, interosseous membrane and joint capsule, elbows were reproducibly positioned in maximal pronation and 15° flexion, for axial compression on a rapid (100 mm/min) or slow (10 mm/min) protocol, applied by randomization between the two elbows of a given cadaver, measuring breaking forces and relative forearm rotation with respect to the humerus before dislocation. RESULTS: The rapid protocol reproduced 4 posterolateral and 1 divergent anteroposterior TTE, and the slow protocol 5 posterolateral TTE. Mean breaking forces were 3,126 ± 1,066 N for the lateral collateral ligament (LCL), 3,026 ± 1,308 N for the RH and 2,613 ± 1,120 N for the CP. Comparing mean breaking forces for all injured structures in a given elbow on the rapid protocol found a p-value of 0.033. Comparison of difference in breaking forces in the three structures (LCL, RH and CP) between the slow and rapid protocols found a mean difference of -4%. Mean relative forearm rotation with respect to the humerus before dislocation was 1.6 ± 1.2° in external rotation. CONCLUSIONS: We create and validate an anatomic model of TTE by exerting axial compression on an elbow in 15° flexion and maximal pronation at speeds of 100 and 10 mm/min.

Low Risk of Clinically Important Traumatic Brain Injury in Children Who Tumble Down Stairs.

BACKGROUND: Pediatric trauma management seeks to minimize head computed tomography (HCT) while capturing clinically important traumatic brain injuries (ciTBI). The Pediatric Emergency Care Applied Research Network (PECARN) system stratifies patients as high-, intermediate-, or low-risk for ciTBI. Although designed for free falls, we noted that PECARN criteria often are applied to tumbling down stairs (TDS), with steps estimated at 12", though TDS rarely appeared to result in ciTBI. METHODS: In a retrospective chart review of pediatric TDS patients, data was collected on mechanism of injury, clinical presentation, imaging, and incidence of ciTBI. PECARN scores were developed under three models: TDS-12 (12″ steps), TDS-8 (more accurate 8" steps), and TDS-0 (TDS not a severe mechanism). RESULTS: 344 patients met criteria for study inclusion. Mean age was 6.3 years and 89 (26%) were <2 years. No patients had ciTBI. This included 88 patients who tumbled down 12 steps or more. Across all models, the same 7 patients (2.0%) were at high-risk for ciTBI. Intermediate- and low-risk cohorts were 287 (83%) and 50 (15%) for TDS-12, 171 (50%) and 166 (48%) for TDS-8, and 16 (4.7%) and 321 (93%) for TDS-0, respectively for each model. Under TDS-8, 116 (34%) patients shifted to the low-risk category. Under TDS-0, 271 (79%) patients shifted to the low-risk category, leaving only 23 patients (6.7%) at high- or intermediate-risk (n = 7, 16, respectively). CONCLUSIONS: In pediatric patients, the risk of ciTBI after TDS is low. TDS should not be treated as a free fall in risk assessment. TYPE OF STUDY: Retrospective Modeling Study. LEVEL OF EVIDENCE: Level III.

Are the Umbilicus and Iliac Crests Truly at the Level of L4 to L5? A Computed Tomography-Based Study of Surface Anatomy of the Anterior Lumbar Spine.

BACKGROUND: This study aimed to determine whether the iliac crests are truly at the level of L4 to L5, accounting for patient demographic and anthropometric characteristics. METHODS: We measured the umbilicus and iliac crests relative to the lumbar spine using computed tomography of patients without spinal pathology, accounting for the influences of patient height, weight, body mass index (BMI), sex, race, and ethnicity. RESULTS: A total of 834 patients (391 men and 443 women) were reviewed. The location of the umbilicus relative to the lumbar spine demonstrated a unimodal distribution pattern clustered at L4, while the iliac crests were most frequently located from L4 to L5. Iliac crests were located above the L4 to L5 disc space 26.5% of the time. Iliac crests were located at the L4 to L5 disc space 29.8% of the time. No correlations were observed between the umbilicus and iliac crests with patient height, weight, or BMI. There was no difference in the location of the umbilicus with respect to patient sex, race, and ethnicity. The locations of the iliac crests were cephalad in women compared with men and in Hispanics compared with African American, Caucasian, and Asian patients. CONCLUSIONS: The iliac crests were located above the level of the L4 to L5 disc space approximately 26% of the time. The umbilicus is most frequently at the level of the L4 vertebral body. Patient height, weight, and BMI do not influence the location of the umbilicus or the iliac crests relative to the lumbar spine. Patient sex and ethnicity influence the location of the iliac crests but not the umbilicus relative to the lumbar spine. CLINICAL RELEVANCE: Modern neurosurgical techniques require clearance of the iliac crests during anterior and anterolateral approaches. Understanding the level of the iliac crests is crucial in planning for transpsoas fusion approaches.

Unicortical Button Fixation Provide Higher Strength Compared with Transosseous Repair for Subscapularis Tendon in Total Shoulder Arthroplasty.

BACKGROUND: Subscapularis tendon (SSc) dysfunction following total shoulder arthroplasty (TSA) results in poor functional outcomes. There have been numerous SSc repair constructs tested biomechanically and clinically, however, none has been demonstrated as superior. Newer techniques and implants have emerged, but have not been fully tested. HYPOTHESIS: We hypothesized that the unicortical button (UB) fixation will provide significantly improved restoration of the anatomic footprint and biomechanical properties when compared to transosseous (TO) repair of the SSc. METHODS: A digital footprint of SSc humeral insertion was obtained in 6 pairs of fresh-frozen cadaveric shoulders using a three-dimensional (3-D) digitizer. A complete SSc tear was created, and each pair of shoulders was randomized to either SSc repair with UB or TO repair. Each specimen underwent a cyclic loading protocol followed by pull-to-failure. The failure load, elongation at failure, gapping failure, number of cycles until failure, the load at key gapping points (1 mm, 3 mm, 5 mm, and 10 mm) and the failure mode were recorded using high-resolution video recording. 3-D surfaces of the insertion footprint and repair site were obtained, and surface areas were calculated using a custom MATLAB script and laser scanner. Paired t-tests were conducted to compare differences between two repair groups. RESULTS: Failure load was significantly higher in the UB group (382.4 N ± 56.5 N) than in the TO group (253.6 N ± 103.4 N, p=0.005). TO repair provided higher gapping at failure (28.8 mm ± 8.2 mm) than UB repair (10.4 mm ± 6.8 mm, p=0.0017). UB repair had significantly higher load at the 1-mm, 5-mm, and 10-mm gapping compared with TO repair with p=0.042, p=0.033, and p=0.0076, respectively. There were no significant differences between elongation failure, the difference in footprint area from native to repair states, or the percentage of restored footprint area between groups. (p=0.26, p=0.18 and p=0.21 respectively) CONCLUSION: The UB fixation showed a significantly lower gap at failure, higher failure load and number of cycles until failure, and higher gap loads compared with the traditional TO repair for SSc. Although more clinical research is necessary, the UB fixation that utilizes cortical bone presents promising results.

Mid-term Radiographic Outcomes of Anatomic Total Shoulder Arthroplasty in Biplanar Glenoid Deformities.

INTRODUCTION: Optimal management of retroversion in anatomic total shoulder arthroplasty (aTSA) remains controversial and limited attention has been directed to the impact of glenoid inclination. Prior biomechanical study suggest that residual glenoid inclination generates shear stresses that may lead to early glenoid loosening. Combined biplanar glenoid deformities may complicate anatomic glenoid reconstruction and affect outcomes. The goal of this matched-cohort analysis was to assess the relationship between biplanar deformities and mid-term radiographic loosening in aTSA. METHODS: The study cohort was identified via an institutional repository of 337 preoperative CT scans from 2010-2017. Glenoid retroversion, inclination, and humeral head subluxation were assessed via 3D-planning software. Patients with retroversion ≥ 20˚ and inclination ≥ 10˚ who underwent aTSA with eccentric reaming and non-augmented components were matched by age, sex, retroversion, and Walch classification to patients with retroversion ≥ 20˚ only. Primary outcome was glenoid component Lazarus radiolucency score. RESULTS: Twenty-eight study subjects were matched to 28 controls with retroversion only. No difference in age (61.3 vs. 63.6 years, p=0.26), sex (19 [68%] vs. 19 [68%] male, p=1.0), or follow-up (6.1 vs. 6.4 years, p=0.59). Biplanar deformities had greater inclination (14.5˚ versus 5.3˚, p<0.001), retroversion (30.0˚ versus 25.6˚, p=0.01) and humeral subluxation (86.3% versus 82.1%, p=0.03). Biplanar patients had greater postoperative implant superior inclination (5.9 [4.6] vs. 3.0 [3.6] degrees, p=0.01) but similar rate of complete seating 24 [86%] vs. 24 [86%] p=1.0). At final follow-up, biplanar subjects had higher Lazarus radiolucent scores (2.4 [1.7] vs. 1.6 [1.1], p=0.03) and higher proportion of patients with glenoid radiolucency (19 [68%] vs. 11 [39%], p=0.03). No difference in complete component seating (86% versus 86%, p=0.47) or initial radiolucency grade (0.21 versus 0.29, p=0.55) on immediate postop radiographs. Biplanar patients demonstrated a greater amount of posterior subluxation at immediate postop(3.5% [1.3%] versus 1.8% [0.6%]; p=0.03) and final follow-up (7.6% [2.8%] versus 4.0% [1.8%]; p=0.04). At final radiographic follow-up, biplanar subjects had higher Lazarus radiolucent scores (2.4 [1.7] vs. 1.6 [1.1], p=0.03; ICC=0.82). Bivariate regression analysis demonstrated biplanar deformity was the only significant predictor (OR 3.3, p=0.04) of glenoid radiolucency. CONCLUSION: Biplanar glenoid deformity resulted in time-zero glenoid implant superior inclination and increased mid-term radiographic loosening and posterior subluxation. Attention to glenoid inclination is important for successful anatomical glenoid reconstruction. Future research is warranted to understand the long-term implications of these findings and impact of utilizing augmented implants or reverse shoulder arthroplasty to manage biplanar deformities.

Finite element analysis part 1 of 2: Influence of short stem implant polyethylene configuration on glenohumeral joint biomechanics.

Purpose: Stress shielding in short-stem arthroplasty can cause critical metaphyseal bone loss. If the size and shape of the humeral shaft are important factors, it is unknown whether the shape of the polyethylene component in reverse shoulder arthroplasty (RSA) affects bone stress around or within the stem. We explored the impact of polyethylene shape on humeral and scapular stress distribution using a finite element model. Methods: We developed a shoulder-specific finite element model. A defined set of muscle forces was applied to simulate movements. An intact rotator cuff state and a superior deficient rotator cuff state were modelled. We used the FX V135 short stem in three conditions: total shoulder arthroplasty (TSA), and RSA with symmetrical and asymmetrical polyethylene (145°/135°). We measured biomechanical markers related to bone stress for different implant sizes. Joint kinematics and the mechanical behaviour of the implant were compared. Results: Rupture of the supraspinatus muscle produced a functionally limited shoulder. The placement of an anatomic TSA with an intact rotator cuff restored function similar to that of a healthy shoulder. RSA in the rotator cuff-deficient shoulder restored function regardless of stem size and polyethylene shape. While stem size had an impact on the stress distribution in the bone and implant, it did not show significant potential for increasing or decreasing overall stress. For the same stem, stress distribution at the humerus is different between TSA and RSA. Polyethylene shape did not alter the transmission of stress to the bone in RSA. Asymmetric polyethylene produced a greater abduction range of motion. Conclusions: In terms of bone stress distribution, smaller stems seemed more appropriate for TSA, while larger stems may be more appropriate for RSA. Polyethylene shape resulted in different ranges of motion but did not influence bone stress. Level of Evidence: Diagnostic Tests or Criteria; Level IV.

Stemless Anatomic and Reverse Shoulder Arthroplasty in Patients under 55 years of age with Primary Glenohumeral Osteoarthritis: An analysis of the Australian Orthopaedic Association National Joint Replacement Registry at five years.

BACKGROUND: Primary glenohumeral osteoarthritis in young patients poses challenging treatment decisions. Arthroplasty options have different failure profiles and implant survivorship patterns. This registry study aims to analyze the cumulative per cent revision rate (CPR) of different types of arthroplasties conducted for primary osteoarthritis in patients under 55 years of age. METHODS: This comparative observational national registry study included all shoulder arthroplasty for osteoarthritis in patients under 55 years of age undertaken between January 1st, 2005, and December 31st, 2022. Partial hemi resurfacing and hemi stemless procedures were excluded. The cumulative percentage of revision (CPR) was determined using Kaplan-Meier estimates of survivorship and hazard ratios (HR) from Cox proportional hazard models adjusted for gender. Reasons for revision of each type of arthroplasty and cumulative incidence of revision diagnoses were analyzed. RESULTS: 2111 primary shoulder arthroplasties were compared. Glenoid erosion is the predominant cause of revision for humeral resurfacing (29.8%) and hemiarthroplasty (35.5%). Instability is the predominant cause of revision for stemmed anatomic total shoulder arthroplasty (ATSA) and reverse total shoulder arthroplasty (RTSA), while loosening is the predominant cause of revision for stemless ATSA. The 6-year CPR is 12.8% for humeral resurfacing (HRA), 14.1% for hemiarthroplasty (HA), 12.4% for stemmed (ATSA), 7.0% for stemless ATSA, and 6.5% for (RTSA). Stemmed ATSA had a higher revision rate than RTSA (entire period HR=2.04 (95% confidence interval (CI) 1.16, 3.57), p=0.012). In contrast, the revision rate of stemless ATSA was not different from RTSA (HR =1.05 (95% CI 0.51, 2.19), p=0.889). Males outnumber females for all shoulder arthroplasty categories. DISCUSSION: RTSA and stemless ATSA are viable options in young patients with primary osteoarthritis. Their short-to medium-term revision rates are comparable to those of older patients and lower than those associated with HRA, HA, and stemmed ATSA. CONCLUSION: In the predominantly male patient population under the age of 55, reverse shoulder arthroplasty and stemless ATSA have a lower short-term revision risk than stemmed ATSA.

Reverse shoulder arthroplasty with an inverted-bearing prosthesis as revision procedure for failed anatomic and reverse shoulder arthroplasty: a long-term multicenter study.

Background: Despite the increasing use of revision reverse total shoulder arthroplasty (RTSA), studies directly comparing revision RTSA performed for different failed index procedures are limited. We therefore compared the results of revision RTSA between patients with a failed primary anatomic arthroplasty (total shoulder arthroplasty and hemiarthroplasty) and those with a failed primary RTSA to explore revision of which index procedure resulted in better long-term clinical outcomes. Methods: In this prospective, multicenter, observational study, patients underwent revision RTSA using an inverted-bearing prosthesis. We recorded clinical scores, active range of motion, pain, satisfaction, and the rate of scapular notching. Complications and prosthesis survival were also noted. Results: We included 45 patients (45 shoulders) with revision RTSA for failed primary anatomic shoulder arthroplasty (30 patients) and RTSA (15 patients). Clinical and radiographic outcomes were recorded from 36 patients at a median follow-up of 101.6 months, and prosthesis survival was assessed from all 45 patients. At final follow-up, clinical scores (P < .05), abduction (P = .032), re-revision rate (P = .018), and prosthesis survival (P = .015) were significantly better in patients revised from failed primary anatomic shoulder arthroplasty than those from RTSA. However, pain, satisfaction, and overall complication rates were similar in both groups (P > .05). Conclusions: We found better long-term clinical scores, abduction, and prosthesis survival rates after failed primary anatomic shoulder arthroplasty than after RTSA. Pain reduction and complication rates were comparable in both groups. Thus, anatomic shoulder arthroplasty remains an attractive option for primary arthroplasty in selected cases.

Cortical Venous Thrombosis Caused by Venous Compression by Arachnoid Cyst.

Clinical Problem: Identification, work-up and treatment approach of isolated cortical venous thrombosis (ICVT) in the absence of traditional risk factors. Case Presentation: A 66-year-old previously well male presenting with two episodes of left-sided spreading sensory symptoms, found to be secondary to ICVT from extrinsic compression by an arachnoid cyst. Key Teaching Points: Early identification of structural abnormalities causing extrinsic venous compression and ICVT or cerebral venous sinus thrombosis (CVST) is important for alternative treatment options and to avoid unnecessary testing.

The clinical outcome comparison between trans-syndesmotic fixation and anatomic deltoid ligament repair in unstable ankle fractures with medial clear space widening: A systematic review and meta-analysis.

BACKGROUND: Due to the variability in evidence supporting either trans-syndesmosis fixation or deltoid ligament repair in unstable ankle fractures with medical clear space (MCS) widening makes it unclear which surgical technique leads to the best patient outcomes. The goal of our systematic review and meta-analysis was to compare clinical outcomes of trans-syndesmotic fixation versus anatomic deltoid ligament repair in the management of unstable ankle fractures with MCS widening. METHODS: Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines were utilized in this study. A comprehensive and systematic search was conducted using the PubMed, Embase, Web of Science and Cochrane Library databases. Outcomes investigated in this review included the rates of syndesmotic malreduction, removal of hardware, postoperative complications including wound issues, and functional/pain scores. RESULTS: A total of five level-3 studies were selected in this review, with 280 unstable ankle fractures with MCS widening: 165 for the trans-syndesmotic fixation group and 115 for the anatomic deltoid ligament repair group. Three out of five studies evaluated syndesmotic malreduction using CT. Compared to the trans-syndesmosis fixation group, the deltoid repair group showed significant lower rates of syndesmotic malreduction rates and removal of hardware: 6.5 % (4/61) Vs. 27 % (16/59) (RR=0.26, 95 % CI=[0.10, 0.68]), and 2.6 % (3/115) Vs.54.5 % (90/165) (RR=0.06, CI=[0.02, 0.14]), respectively. No significant differences were found between the two groups in postoperative wound complications, reoperations, and functional scores including AOFAS and VAS pain score. CONCLUSIONS: Based on our findings, anatomic deltoid ligament repair was associated with a lower rate of syndesmotic malreduction and the need for hardware removal while there was no significant difference in terms of postoperative wound complications, reoperation, AOFAS score, or VAS pain score. These results should be interpreted with caution due to limitations related to heterogeneity among the studies. Further high-level RCTs with larger sample sizes are necessary to establish a robust consensus.

Meandering main pancreatic duct syndrome: a single-center cohort study and aggregated review.

Background: Meandering main pancreatic duct (MMPD) refers to an uncommon ductal variant of the normal smooth curvilinear course of the pancreatic duct. More specifically, MMPD is characterized by a hairpin (reverse Z-type) or loop (loop-type) turn in the pancreatic head. It has been suggested as a predisposing factor for the development of pancreatitis. Studies regarding treatment are scarce. Methods: We conducted a narrative review of the current literature regarding MMPD. Additionally, we present a cohort of 9 symptomatic patients treated endoscopically at our tertiary center. Results: Seven retrospective cohort studies and 4 case reports were included in our review. Only 1 study focuses on the clinical significance of MMPD and describes a positive association between MMPD and the onset of pancreatitis, especially recurrent acute pancreatitis. Only 1 case reports an endoscopic treatment. In our cohort of 9 MMPD patients, 7 did indeed present with recurrent acute pancreatitis. Endotherapy provided substantial regression of symptoms in 6 patients, all of whom had signs of ductal hypertension. Conclusions: Our review shows the scarcity of data regarding MMPD, especially concerning treatment, in the current literature. With our cohort, we not only hope to raise awareness of this often-neglected entity of recurrent acute pancreatitis, but also support the case for endotherapy for the first time in 9 symptomatic MMPD patients, especially in the presence of ductal hypertension.

Anatomic femoral tunnel and satisfactory clinical outcomes achieved with the modified transtibial technique in anterior cruciate ligament reconstruction: A systematic review and meta-analysis.

Background: Anatomic anterior cruciate ligament (ACL) reconstruction is considered the gold standard treatment for ACL injuries because it aims to restore the knee's normal anatomy and stability, while also protecting long-term knee health. Long-term clinical and radiological outcomes after ACL reconstruction using the modified TT technique are unclear. Objective: To assess the clinical and radiological outcomes following ACL reconstruction using modified transtibial (TT) techniques at a minimum 12-month follow-up. Design: A systematic review with meta-analysis. Methods: PubMed, EMBASE, Web of Science, the Cochrane Library, and MEDLINE databases were searched from the inception to December 1, 2022. PICO search strategy was used to identify studies applying modified TT techniques on patients with ACL reconstruction and a minimum follow-up of 12 months. Eligible studies were identified independently by two reviewers. We extracted data on patient demographics, surgical characteristics, patient reported outcomes including subjective evaluations and clinical outcomes. Radiological data including femoral and tibial tunnel position, femoral and tibial tunnel length, and femoral tunnel angle were also extracted. The tunnel position was evaluated using the quadrant method based on three-dimensional computed tomography (3D CT) images. The standardized mean difference (SMD) and 95 % confidence interval (CI) were calculated for clinical and radiological outcomes. Results: Sixteen studies involving 628 patients were finally included. The SMD of Lysholm (90.39; 95 % CI 83.41-97.38), IKDC (86.07; 95 % CI 79.84-92.31), and Tegner (6.15; 95 % CI 3.96-8.33) scores were considered satisfactory. The depth of the femoral tunnel showed a pooled SMD of 30.08 % (95 % CI 28.25-31.91 %), and the height showed a pooled SMD of 37.72 % (95 % CI 35.75-39.70 %). The pooled SMD for the femoral tunnel angle in the coronal plane was 48.27°(95 % CI 43.14-53.40°), and the pooled SMD for the femoral tunnel length was 33.98 mm (95 % CI 29.03-38.93 mm). Conclusions: This investigation has shown that modified TT technique can create an anatomic femoral tunnel and maintain optimal tunnel length and angulation. Most patients had satisfactory subjective outcomes and physical examinations after ACL reconstruction using modified TT technique. This information may assist in guiding expectations of clinicians and patients following ACL reconstruction with modified TT technique.

Current Evidence and Techniques for Arthroscopic Bone Augmentation.

The indications for bone block augmentation of the glenoid following recurrent anterior shoulder instability are expanding. Arthroscopic anatomic glenoid reconstruction (AAGR) is an evolving technique with similar clinical results to the Latarjet procedure and other open bone block procedures. Multiple types of bone grafts and fixation techniques have been described, with varying results on bony integration, resorption, articular congruity, and recurrence rates. This review focuses on biomechanics, patient workup, indications, current evidence, and the authors' preferred surgical technique for AAGR.