RESUMO
High-voltage ultrahigh-Ni cathodes (LiNixCoyMn1-x-yO2, x ≥â¯0.9) can significantly enhance the energy density and cost-effectiveness of Li-ion batteries beyond current levels. However, severe Li-Ni antisite defects and their undetermined dynamic evolutions during high-voltage cycling limit the further development of these ultrahigh-Ni cathodes. In this study, we quantify the dynamic evolutions of the Li-Ni antisite defect using operando neutron diffraction and reveal its coupling relationship with anionic redox, another critical challenge restricting ultrahigh-Ni cathodes. We detect a clear Ni migration coupled with an unstable oxygen lattice, which accompanies the oxidation of oxygen anions at high voltages. Based on these findings, we propose that minimized Li-Ni antisite defects and controlled Ni migrations are essential for achieving stable high-voltage cycling structures in ultrahigh-Ni cathodes. This is further demonstrated by the optimized ultrahigh-Ni cathode, where reduced dynamic evolutions of the Li-Ni antisite defect effectively inhibit the anionic redox, enhancing the 4.5 V cycling stability.
RESUMO
Given the pressing depletion of lithium resources, sodium-ion batteries (SIBs) stand out as a cost-effective alternative for energy storage solutions in the near future. Layered transition metal oxides (LTMOs) emerge as the leading cathode materials for SIBs due to their superior specific capacities and abundant raw materials. Nonetheless, achieving long-term stability in LTMOs for SIBs remains a challenge due to the inevitable structural degradation during charge-discharge cycles. The complexity and diversity of cation configurations/superstructures within the transition metal layers (TMO2) further complicate the understanding for newcomers. Therefore, it is critical to summarize and discuss the factors leading to structural degradation and the available strategies for enhancing LTMOs' stability. In this review, the cationic configurations of TMO2 layers are introduced from a crystallographic perspective. It then identifies and examines four key factors responsible for structural decay, alongside the impacts of various modification strategies. Finally, more effective and practical research approaches for investigating LTMOs have been proposed. The work aims to enhance the comprehension of the structural deterioration of LTMOs and facilitate a substantial improvement in their cycle life and energy density.
RESUMO
Compensating for the irreversible loss of limited active sodium (Na) is crucial for enhancing the energy density of practical sodium-ion batteries (SIBs) full-cell, especially when employing hard carbon anode with initially lower coulombic efficiency. Introducing sacrificial cathode presodiation agents, particularly those that own potential anionic oxidation activity with a high theoretical capacity, can provide additional sodium sources for compensating Na loss. Herein, Ni atoms are precisely implanted at the Na sites within Na2O framework, obtaining a (Na0.89Ni0.05â¡0.06)2O (Ni-Na2O) presodiation agent. The synergistic interaction between Na vacancies and Ni catalyst effectively tunes the band structure, forming moderate Ni-O covalent bonds, activating the oxidation activity of oxygen anion, reducing the decomposition overpotential to 2.8 V (vs Na/Na+), and achieving a high presodiation capacity of 710 mAh/g≈Na2O (Na2O decomposition rate >80%). Incorporating currently-modified presodiation agent with Na3V2(PO4)3 and Na2/3Ni2/3Mn1/3O2 cathodes, the energy density of corresponding Na-ion full-cells presents an essential improvement of 23.9% and 19.3%, respectively. Further, not limited to Ni-Na2O, the structure-function relationship between the anionic oxidation mechanism and electrode-electrolyte interface fabrication is revealed as a paradigm for the development of sacrificial cathode presodiation agent.
RESUMO
Lithium-rich antiperovskites promise to be a compelling class of high-capacity cathode materials due to the existence of both cationic and anionic redox activity. Little is however known about the effect of separating the electrochemical cationic process from the anionic process and the associated implications on the electrochemical performance. In this context, we report the electrochemical properties of the illustrative example of three different (Li2Fe)SO materials with a focus on separating cationic from anionic effects. With the high-voltage anionic process, an astonishing electrochemical capacity of around 400 mAh g-1 can initially be reached. Our results however identify the anionic process as the cause of poor cycling stability and demonstrate that the fading reported in previous literature is avoided by restricting to only the cationic processes. Following this path, our (Li2Fe)SO-BM500 shows strongly improved performance as indicated by constant electrochemical cycling over 100 cycles at a capacity of around 175 mAh g-1 at 1 C. Our approach also allows us to investigate the electrochemical performance of the bare antiperovskite phase excluding extrinsic activity from initial or cycling-induced impurity phases. Our results underscore that synthesis conditions are a critical determinant of electrochemical performance in lithium-rich antiperovskites, especially with regard to the amount of electrochemical secondary phases, while the particle size has not been found to be a crucial parameter. Overall, separating and understanding the effects of the cationic from the anionic redox activity in lithium-rich antiperovskites provides the route to further improve their performance in electrochemical energy storage.
RESUMO
The lithium-rich manganese-based layer oxide (LRMO) with high specific capacity (â¼300 mAh g-1) and economic feasibility is accepted as the cathode material for high energy density rechargeable batteries. Accompanied by the additional anionic redox reactions during the initial charging process, LRMO presents oxygen release, sluggish Li+ diffusion, and irreversible transition metal ion (TM) migration, which is responsible for its severe structural deterioration and rapid capacity/voltage decay. Here, the N doping strategy is proposed via feasible treatment of oxygen-vacancy-containing Li1.16Ni0.21Mn0.63O2-δ (LNMO) particles. The as obtained LNMO-N samples demonstrate doping N, partially reduced Mn/Ni cations, and oxygen vacancies on the surface. The DFT calculations and experimental results demonstrate that N replacing the crystal oxygen sites on the surface reduces the energy barrier for diffusion, thereby enhancing the kinetics of Li+ diffusion and improving the reversibility of transition metal migration. Furthermore, N doping induces stacking faults and a more flexible structure. Therefore, LNMO-N exhibits a significantly improved anionic-cationic redox reaction reversibility with a high discharge specific capacity of 296.6 mAh g-1 at 20 mA g-1 within the range of 2.0 to 4.8 V and an impressive initial Coulombic efficiency of 85.9%. Moreover, the rate capability is obviously improved with a remarkable capacity of 215.1 mAh g-1 at 200 mA g-1 in 200 cycles with a capacity retention of 72.52% and exceptional performance of 141.4 mAh g-1 even at a higher current density of 1000 mA g-1.
RESUMO
Layered iron/manganese-based oxides are a class of promising cathode materials for sustainable batteries due to their high energy densities and earth abundance. However, the stabilization of cationic and anionic redox reactions in these cathodes during cycling at high voltage remain elusive. Here, an electrochemically/thermally stable P2-Na0.67Fe0.3Mn0.5Mg0.1Ti0.1O2 cathode material with zero critical elements is designed for sodium-ion batteries (NIBs) to realize a highly reversible capacity of ≈210 mAh g-1 at 20 mA g-1 and good cycling stability with a capacity retention of 74% after 300 cycles at 200 mA g-1, even when operated with a high charge cut-off voltage of 4.5 V versus sodium metal. Combining a suite of cutting-edge characterizations and computational modeling, it is shown that Mg/Ti co-doping leads to stabilized surface/bulk structure at high voltage and high temperature, and more importantly, enhances cationic/anionic redox reaction reversibility over extended cycles with the suppression of other undesired oxygen activities. This work fundamentally deepens the failure mechanism of Fe/Mn-based layered cathodes and highlights the importance of dopant engineering to achieve high-energy and earth-abundant cathode material for sustainable and long-lasting NIBs.
RESUMO
Magnesium batteries attract interest as alternative energy-storage devices because of elemental abundance and potential for high energy density. Development is limited by the absence of suitable cathodes, associated with poor diffusion kinetics resulting from strong interactions between Mg2+ and the host structure. V2PS10 is reported as a positive electrode material for rechargeable magnesium batteries. Cyclable capacity of 100â mAh g-1 is achieved with fast Mg2+ diffusion of 7.2 × ${\times }$ 10-11-4 × ${\times }$ 10-14â cm2 s-1. The fast insertion mechanism results from combined cationic redox on the V site and anionic redox on the (S2)2- site; enabled by reversible cleavage of S-S bonds, identified by X-ray photoelectron and X-ray absorption spectroscopy. Detailed structural characterisation with maximum entropy method analysis, supported by density functional theory and projected density of states analysis, reveals that the sulphur species involved in anion redox are not connected to the transition metal centres, spatially separating the two redox processes. This facilitates fast and reversible Mg insertion in which the nature of the redox process depends on the cation insertion site, creating a synergy between the occupancy of specific Mg sites and the location of the electrons transferred.
RESUMO
Li-rich layered oxides cathodes (LLOs) have prevailed as the promising high-energy-density cathode materials due to their distinctive anionic redox chemistry. However, uncontrollable anionic redox process usually leads to structural deterioration and electrochemical degradation. Herein, a Mo/Cl co-doping strategy is proposed to regulate the relative position of energy band for modulating the anionic redox chemistry and strengthening the structural stability of Co-free Li1.16Mn0.56Ni0.28O2 cathodes. The incorporation of Mo with high d state orbit and Cl with low electronegativity can narrow the band energy gap between bonding and antibonding bands via increasing the filled lower-Hubbard band (LHB) and decreasing the non-bonding O 2p energy bands, promoting the anionic redox reversibility. In addition, strong covalent MoâO and MnâCl bonding further increases the covalency of MnâO band to further stabilize the O2 n- species and enhance the reversible distortion of MnO6 octahedron. The strengthening electronic conductivity, together with the epitaxial structure Li2MoO4 facilitates the fast Li+ kinetics. As a result, the dual doping material exhibits enhanced anionic redox reversibility and suppressed oxygen release with increased cyclic stability and excellent rate performance. This strategy provides some guidance to design high-energy-density LLOs with desirable anionic redox reversibility and stable crystal structure via band structure engineering.
RESUMO
The irrational utilization of an anionic electron often accompanies structural degradation with an irreversible cation migration process upon cycling in sodium-layered oxide cathodes. Moreover, the insufficient understanding of the anionic redox involved cation migration makes the design strategies of high energy density electrodes even less effective. Herein, a P3-Na0.67Li0.2Fe0.2Mn0.6O2 (P3-NLFM) cathode is proposed with the in-plane disordered Li distribution after an in-depth remolding of the Li ribbon-ordered P3-Na0.6Li0.2Mn0.8O2 (P3-NLM) layered oxide. The disordered Li sublattice in the transition metal slab of P3-NLFM leads to the dispersed |O2p orbitals, the lowered charge transfer gap, and the suppressed phase transition at high voltages. Then the enhanced Mn-O interaction and electronic stability are disclosed by the crystal orbital Hamilton population (COHP) analysis at high voltage in P3-NLFM. Furthermore, ab initio molecular dynamics (AIMD) simulation suggests the order/disorder of the transition metal layer is highly correlated with the stability of the Li sublattice. The cross-layer migration and loss of Li in P3-NLM are suppressed in P3-NLFM to enable the high reversibility upon cycling. As a result, the P3-NLFM delivers a high capacity of 163 mAh g-1 without oxygen release and an enhanced capacity retention of 81.9% (vs 42.9% in P3-NLM) after 200 cycles, which constitutes a promising approach for sustainable oxygen redox in rechargeable batteries.
RESUMO
Manganese-based layered oxides are considered promising cathodes for sodium ion batteries due to their high capacity and low-cost manganese and sodium resources. Triggering the anionic redox reaction (ARR) can exceed the capacity limitation determined by conventional cationic redox. However, the unstable ARR charge compensation and Jahn-Teller distortion of Mn3+ ions readily result in structural degradation and rapid capacity fade. Here, we report a P2-type Na0.8Li0.2Mn0.7Cu0.1O2 cathode that shows a capacity retention of 84.5% at 200 mA/g after 200 cycles. Combining in situ X-ray diffraction and multi other ex situ characterizations, we reveal that the enhanced cycling stability is ascribed to a slow release of cationic redox activity which can well suppress the Jahn-Teller distortion and favor the ARR reversibility. Furthermore, density-functional theory calculations demonstrate that the inhibited interlayer migration and reduced band gap facilitate the stability and kinetic behavior of ARR. These findings provide a perspective for designing high-energy-density cathode materials with ARR activity.
RESUMO
Reversible oxygen redox (OR) is considered as a paradigmatic avenue to boost the energy densities of layered oxide cathodes. However, its activation is largely coupled with the local coordination environment around oxygen, which is usually accompanied with irreversible oxygen release and unfavorable structure distortion. Herein, it is revealed that the synergistic effect of transition-metal (TM) vacancy and substitution element for modulating the OR activity and reversibility of layered Na0.67 MnO2 through multimodal operando synchrotron characterizations and electrochemical investigations. It is disclosed that TM vacancy can not only suppress the complicated phase transition but also stimulate the OR activity by creating nonbonding O 2p states via the NaâOâvacancy configurations. Notably, the substitution element plays a decisive role for regulating the reversibility of vacancy-boosted OR activity: the presence of strong AlâO bonds stabilizes the Mn-O motifs by sharing O with Al in the rigid MnâOâAl frameworks, which mitigates TM migration and oxygen release induced by TM vacancy, leading to enhanced OR reversibility; while the introduction of weak ZnâO bonds exacerbates TM migration and irreversible oxygen release. This work clarifies the critical role of both TM vacancy and substitution element for regulating the OR chemistry, providing an effective avenue for designing high-performance cathodes employing anionic redox.
RESUMO
Compensating the irreversible loss of limited active lithium (Li) is essentially important for improving the energy-density and cycle-life of practical Li-ion battery full-cell, especially after employing high-capacity but low initial coulombic efficiency anode candidates. Introducing prelithiation agent can provide additional Li source for such compensation. Herein, we precisely implant trace Co (extracted from transition metal oxide) into the Li site of Li2 O, obtaining (Li0.66 Co0.11 â¡0.23 )2 O (CLO) cathode prelithiation agent. The synergistic formation of Li vacancies and Co-derived catalysis efficiently enhance the inherent conductivity and weaken the Li-O interaction of Li2 O, which facilitates its anionic oxidation to peroxo/superoxo species and gaseous O2 , achieving 1642.7â mAh/g~Li2O prelithiation capacity (≈980â mAh/g for prelithiation agent). Coupled 6.5â wt % CLO-based prelithiation agent with LiCoO2 cathode, substantial additional Li source stored within CLO is efficiently released to compensate the Li consumption on the SiO/C anode, achieving 270â Wh/kg pouch-type full-cell with 92 % capacity retention after 1000 cycles.
RESUMO
Developing sacrificial cathode prelithiation technology to compensate for active lithium loss is vital for improving the energy density of lithium-ion battery full-cells. Li2CO3 owns high theoretical specific capacity, superior air stability, but poor conductivity as an insulator, acting as a promising but challenging prelithiation agent candidate. Herein, extracting a trace amount of Co from LiCoO2 (LCO), a lattice engineering is developed through substituting Li sites with Co and inducing Li defects to obtain a composite structure consisting of (Li0.906Co0.043â«0.051)2CO2.934 and ball milled LiCoO2 (Co-Li2CO3@LCO). Notably, both the bandgap and LiâO bond strength have essentially declined in this structure. Benefiting from the synergistic effect of Li defects and bulk phase catalytic regulation of Co, the potential of Li2CO3 deep decomposition significantly decreases from typical >4.7 to ≈4.25 V versus Li/Li+, presenting >600 mAh g-1 compensation capacity. Impressively, coupling 5 wt% Co-Li2CO3@LCO within NCM-811 cathode, 235 Wh kg-1 pouch-type full-cell is achieved, performing 88% capacity retention after 1000 cycles.
RESUMO
Electrolyte engineering is a fascinating choice to improve the performance of Li-rich layered oxide cathodes (LRLO) for high-energy lithium-ion batteries. However, many existing electrolyte designs and adjustment principles tend to overlook the unique challenges posed by LRLO, particularly the nucleophilic attack. Here, we introduce an electrolyte modification by locally replacing carbonate solvents in traditional electrolytes with a fluoro-ether. By benefit of the decomposition of fluoro-ether under nucleophilic O-related attacks, which delivers an excellent passivation layer with LiF and polymers, possessing rigidity and flexibility on the LRLO surface. More importantly, the fluoro-ether acts as "sutures", ensuring the integrity and stability of both interfacial and bulk structures, which contributed to suppressing severe polarization and enhancing the cycling capacity retention from 39 % to 78 % after 300â cycles for the 4.8â V-class LRLO. This key electrolyte strategy with comprehensive analysis, provides new insights into addressing nucleophilic challenge for high-energy anionic redox related cathode systems.
RESUMO
Both layered- and rocksalt-type Li-rich cathode materials are drawing great attention due to their enormous capacity, while the individual phases have their own drawbacks, such as great volume change for the layered phase and low electronic and ionic conductivities for the rocksalt phase. Previously, we have reported the layered/rocksalt intergrown cathodes with nearly zero-strain operation, while the use of precious elements hinders their industrial applications. Herein, low-cost 3d Mn4+ ions are utilized to partially replace the expensive Ru5+ ions, to develop novel ternary Li-rich cathode material Li1+x[RuMnNi]1-xO2. The as-designed Li1.15Ru0.25Mn0.2Ni0.4O2 is revealed to have a layered/rock salt intergrown structure by neutron diffraction and transmission electron microscopy. The as-designed cathode exhibits ultrahigh lithium-ion reversibility, with 0.86 (231.1 mAh g-1) out of a total Li+ inventory of 1.15 (309.1 mAh g-1). The X-ray absorption spectroscopy and resonant inelastic X-ray scattering spectra further demonstrate that the high Li+ storage of the intergrown cathode is enabled by leveraging cationic and anionic redox activities in charge compensation. Surprisingly, in situ X-ray diffraction shows that the intergrown cathode undergoes extremely low-strain structural evolution during the charge-discharge process. Finally, the Mn content in the intergrown cathodes is found to be tunable, providing new insights into the design of advanced cathode materials for high-energy Li-ion batteries.
RESUMO
Layered transition metal oxides have the greatest potential for commercial application as cathode materials for sodium-ion batteries. However, transition metal oxides inevitably undergo an irreversible oxygen loss process during cycling, which leads to structural changes in the material and ultimately to severe capacity degradation. In this work, using density function theory (DFT) calculations, the Ni-O bond is revealed to be the weakest of the M-O bonds, which may lead to structural failure. Herein, the synergistic surface CeO2 modification and the trace doping of Ce elements stimulate oxygen redox and improve its reversibility, thus improving the structural stability and electrochemical performance of the material. Theoretical calculations prove that Na0.67Mn0.7Ni0.2Co0.1O2 (MNC) obtains electrons from CeO2, avoiding destruction of the Ni-O bond by over-energy released during the charging process and inhibiting oxygen loss. The capacity retention was 77.37% for 200 cycles at 500 mA g-1, compared to 33.84% for the unmodified Na0.67Mn0.7Ni0.2Co0.1O2. Overall, the present work demonstrates that the synergistic effect of surface coating and doping is an effective strategy for realizing tuning oxygen release and high electrochemical performance.
RESUMO
Li-rich layered oxide (LLO) cathode materials with mixed cationic and anionic redox reactions display much higher specific capacity than other traditional layered oxide materials. However, the practical specific capacity of LLO during the first cycle in sulfide all-solid-state lithium-ion batteries (ASSLBs) is extremely low. Herein, the capacity contribution of each redox reaction in LLO during the first charging process is qualitatively and quantitatively analyzed by comprehensive electrochemical and structural measurements. The results demonstrate that the cationic redox of the LiTMO2 (TM = Ni, Co, Mn) phase is almost complete, while the anionic redox of the Li2MnO3 phase is seriously limited due to the sluggish transport kinetics and severe LLO/Li6PS5Cl interface reaction at high voltage. Therefore, the poor intrinsic conductivity and interface stability during the anionic redox jointly restrict the capacity release or delithiation/lithiation degree of LLO during the first cycle in sulfide ASSLBs. This study reveals the origin of the seriously limited anionic redox reaction in LLO, providing valuable guidance for the bulk and interface design of high-energy-density ASSLBs.
RESUMO
On account of high capacity and high voltage resulting from anionic redox, Li-rich layered oxides (LLOs) have become the most promising cathode candidate for the next-generation high-energy-density lithium-ion batteries (LIBs). Unfortunately, the participation of oxygen anion in charge compensation causes lattice oxygen evolution and accompanying structural degradation, voltage decay, capacity attenuation, low initial columbic efficiency, poor kinetics, and other problems. To resolve these challenges, a rational structural design strategy from surface to bulk by a facile pretreatment method for LLOs is provided to stabilize oxygen redox. On the surface, an integrated structure is constructed to suppress oxygen release, electrolyte attack, and consequent transition metals dissolution, accelerate lithium ions transport on the cathode-electrolyte interface, and alleviate the undesired phase transformation. While in the bulk, B doping into Li and Mn layer tetrahedron is introduced to increase the formation energy of O vacancy and decrease the lithium ions immigration barrier energy, bringing about the high stability of surrounding lattice oxygen and outstanding ions transport ability. Benefiting from the specific structure, the designed material with the enhanced structural integrity and stabilized anionic redox performs an excellent electrochemical performance and fast-charging property..
RESUMO
Owing to the capacity boost from anion redox activities, cation-disordered rock-salt oxides are considered as potential candidates for the next-generation of high energy density Li-ion cathode materials. Unfortunately, the anion redox process that affords ultra-high specific capacity often triggers irreversible O2 release, which brings about structural degradation and rapid capacity decay. In this study, we present a partial chlorine (Cl) substitution strategy to synthesize a new cation-disordered rock-salt compound of Li1.225Ti0.45Mn0.325O1.9Cl0.1 and investigate the impact of Cl substitution on the oxygen redox process and the structural stability of cation-disordered rock-salt cathodes. We find that partial replacement of O2- by Cl- expands the cell volume and promotes anion redox reaction reversibility, thus increasing the Li+ ion diffusion rate and suppressing irreversible lattice oxygen loss. As a result, the Li1.225Ti0.45Mn0.325O1.9Cl0.1 cathode exhibits significantly improved cycling durability at high current densities, compared with the pristine Li1.225Ti0.45Mn0.325O2 cathode. This work demonstrates the promising feasibility of the Cl substitution process for advanced cation-disordered rock-salt cathode materials.
RESUMO
Li-rich Mn-based layered oxides (LLOs) are one of the most promising cathode materials, which have exceptional anionic redox activity and a capacity that surpasses 250 mA h/g. However, the change from a layered structure to a spinel structure and unstable anionic redox are accompanied by voltage attenuation, poor rate performance, and problematic capacity. The technique of stabilizing the crystal structure and reducing the surface oxygen activity is proposed in this paper. A coating layer and highly concentrated oxygen vacancies are developed on the material's surface, according to scanning electron microscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy. In situ EIS shows that structural transformation and oxygen release are inhibited during the first charge and discharge. Optimized 3@LRMA has an average attenuation voltage of 0.55 mV per cycle (vs 1.7 mV) and a capacity retention rate of 93.4% after 200 cycles (vs 52.8%). Postmortem analysis indicates that the successful doping of Al ions into the crystal structure effectively inhibits the structural alteration of the cycling process. The addition of oxygen vacancies reduces the surface lattice's redox activity. Additionally, surface structure deterioration is successfully halted by N- and Cl-doped carbon coating. This finding highlights the significance of lowering the surface lattice oxygen activity and preventing structural alteration, and it offers a workable solution to increase the LLO stability.