Multi-informant evaluation of Cognitive Disengagement Syndrome (formerly Slow Cognitive Tempo). Children's self-reported measures in relation to parents / Evaluación multi-informante del Síndrome de Desconexión Cognitiva (anteriormente Tempo Cognitivo Lento). Medidas autoinformadas de los niños con relación a padres

El objetivo fue examinar, desde una aproximación multi-informante, las medidas del Síndrome de Desconexión Cognitiva (SDC) de padres/madres e hijos/as y su relación con síntomas internalizantes y externalizantes. 279 niños/as (9-13 años), y sus padres/madres completaron las evaluaciones sobre SDC, la inatención del trastorno por déficit de atención e hiperactividad (TDAH) y otras medidas internalizadas y externalizadas. Los ítems de las tres medidas de SDC convergieron razonablemente bien en el factor SDC. Se aportaron pruebas discriminantes de la validez de las relaciones entre las puntuaciones de las pruebas y las medidas de los tres constructos diferentes (SDC, soledad y preferencia por la soledad). La asociación más estrecha estuvo entre la evaluación parental de las medidas de SDC con ansiedad y depresión, y entre inatención con hiperactividad/impulsividad y trastorno negativista desafiante. Se observó capacidad predictiva de la medida de SDC sobre la soledad y preferencia por estar solo autoinformadas. Se encontró una posible asociación entre la medida del SDC evaluado por padres/madres y sexo y edad de los niños. En conclusión, los datos apoyan la inclusión de medidas autoinformadas en la evaluación del SDC. Las medidas del SDC en niños se vinculan con medidas internalizantes y, la inatención con las externalizantes.(AU)

Solid-state Ru(bpy)32+ electrochemiluminescence sensor for trace detection of fenpropathrin using loofah sponge-like carbon nanofibers and CdS.

Loofah sponge-like carbon nanofibers (LF-Co,N/CNFs) were utilized as a carrier for Ru(bpy)32+, and then combined with CdS to create a novel solid-state electrochemiluminescence sensor capable of detecting trace amounts of fenpropathrin. LF-Co,N/CNFs, obtained through the high-temperature pyrolysis of ZIF-67 coaxial electrospinning fibers, were characterized by a loofah-like morphology and exhibited a significant specific surface area and porosity. Apart from serving as a carrier, LF-Co,N/CNFs also functioned as a luminescence accelerator, enhancing the system's luminescence efficiency by facilitating electron transmission and reducing the transmission distance. The inclusion of CdS in the luminescence reaction, in conjunction with Ru(bpy)32+, further boosted the sensor's luminescence signal. The resulting sensor demonstrated a satisfactory signal, with fenpropathrin causing significant quenching of the ECL signal. Under optimized conditions, a linear relationship between the signal quench value and fenpropathrin concentration in the range 1 × 10-12 to 1 × 10-6 M was observed, with a detection limit of 3.3 × 10-13 M (S/N = 3). This developed sensor is characterized by its simplicity, sensitivity, and successful application in detecting fenpropathrin in real samples. The study not only presents a straightforward detection platform for fenpropathrin but also introduces new avenues for the rapid determination of various food contaminants, thereby expanding the utility of carbon fibers in electrochemiluminescence sensors.

Releasing Au Electrons to Mo Site for Weakened Mo─H Bond of Mo2C MXene Cocatalyst Toward Improved Photocatalytic H2 Production.

Mo2C MXene (Mo2CTx) is one of the most promising noble-metal-free cocatalysts for photocatalytic H2 production because of its excellent electron transport capacity and abundant Mo sites. However, Mo2CTx typically exhibits a strong Mo─Hads bond, resulting in that the produced H2 difficultly desorbs from the Mo surface for the limited activity. To effectively weaken the Mo─Hads bond, in this paper, a regulation strategy of electron donor Au releasing electrons to the d-orbitals of Mo sites in Mo2CTx is proposed. Herein, the Mo2CTx-Au/CdS photocatalysts are prepared through a two-step process, including the initial loading of Au nanoparticles on the Mo2CTx surface and the subsequent in situ growth of CdS onto the Mo2CTx-Au surface. Photocatalytic measurements indicate that the maximal H2-production rate of Mo2CTx-Au/CdS reaches up to 2799.44 µmol g-1 h-1, which is 30.99 and 3.60 times higher than that of CdS and Mo2CTx/CdS, respectively. Experimental and theoretical data corroborate that metallic Au can transfer free electrons to Mo2CTx to generate electron-enriched Moδ- sites, thus causing the increased antibonding-orbital occupancy state and the weakened Mo─Hads bond for the boosted H2-production efficiency. This research provides a promising approach for designing Mo2CTx-based cocatalysts by regulating the antibonding-orbital occupancy of Mo sites for improved photocatalytic performance.

Alfalfa biomass as a green source for the synthesis of N,S-CDs via microwave treatment. Application as a nano sensor for nifuroxazide in formulations and gastric juice.

BACKGROUND: Researchers have investigated different techniques for synthesis of carbon dots. These techniques include Arc discharge, laser ablation, oxidation, water/solvothermal, and chemical vapor deposition. However, these techniques suffer from some limitations like the utilization of gaseous charged particles, high current, high temperature, potent oxidizing agents, non-environmentally friendly carbon sources, and the generation of uneven particle size. Therefore, there was a significant demand for the adoption of a new technology that combines the environmentally friendly aspects of both bio-based carbon sourcing and synthesis technique. RESULTS: Medicago sativa L (alfalfa)-derived N, S-CDs have been successfully synthesized via microwave irradiation. The N,S-CDs exhibit strong fluorescence (λex/em of 320/420 nm) with fluorescence quantum yield of 2.2 % and high-water solubility. The produced N,S-CDs were characterized using TEM, EDX, Zeta potential analysis, IR, UV-Visible, and fluorescence spectroscopy. The average diameter of the produced N, S-CDs was 4.01 ± 1.2 nm, and the Zeta potential was -24.5 ± 6.63 mv. The stability of the produced nano sensors was also confirmed over wide pH range, long time, and in presence of different ions. The synthesized N, S-CDs were employed to quantify the antibacterial drug, nifuroxazide (NFZ), by fluorescence quenching via inner filter effect mechanism. The method was linear with NFZ concentration ranging from 1.0 to 30.0 µM. LOD and LOQ were 0.16 and 0.49 µM, respectively. The method was applied to quantify NFZ in simulated gastric juice (SGJ) with % recovery 99.59 ± 1.4 in addition to pharmaceutical dosage forms with % recovery 98.75 ± 0.61 for Antinal Capsules® and 100.63 ± 1.54 for Antinal suspension®. The Method validation was performed in compliance with the criteria outlined by ICH. SIGNIFICANCE AND NOVELTY: The suggested approach primarily centers on the first-time use of alfalfa, an ecologically sustainable source of dopped-CDs, and a cost-effective synthesis technique via microwave irradiation, which is characterized by low energy consumption, minimized reaction time, and the ability to control the size of the produced CDs. This is in line with the growing global recognition of the implementation of green analytical chemistry principles.

Discovery of FeP/Carbon Dots Nanozymes for Enhanced Peroxidase-Like Catalytic and Antibacterial Activity.

Iron phosphide/carbon (FeP/C) serving as electrocatalysts exhibit excellent activity in oxygen reduction reaction (ORR) process. H2O2 catalyzed by peroxidase (POD) is similar to the formation of new electron transfer channels and the optimization of adsorption of oxygen-containing intermediates or desorption of products in ORR process. However, it is still a challenge to discover FeP/C with enhanced POD-like catalytic activity in the electrocatalytic database for biocatalysis. The discovery of FeP/carbon dots (FeP/CDs) nanozymes driven by electrocatalytic activity for enhanced POD-like ability is demonstrated. FeP/CDs derived from CDs-Fe3+ chelates show enhanced POD-like catalytic and antibacterial activity. FeP/CDs exhibit enhanced POD-like activities with a specific activity of 31.1 U mg-1 that is double higher than that of FeP. The antibacterial ability of FeP/CDs nanozymes with enhanced POD-like activity is 98.1%. The antibacterial rate of FeP/CDs nanozymes (250 µg mL-1) increased by 5%, 15%, and 36% compared with FeP, Fe2O3/CDs, and Cu3P/CDs nanozymes, respectively. FeP/CDs nanozymes will attract more efforts to discover or screen transition metal phosphide/C nanozymes with enhanced POD-like catalytic activity for biocatalysis in the electrocatalytic database.

Mechanisms and risk factors associated with spinal cord injury, facet fracture, and level of dislocation, in occupants with cervical spine dislocations sustained in motor vehicle crashes.

OBJECTIVE: Motor vehicle crashes (MVCs) are the leading cause of cervical spine dislocation. The mechanisms underlying this injury are unclear, limiting the development of injury prevention devices and strategies. MVC databases contain occupant, medical, vehicle, and crash details that are not routinely collected elsewhere, providing a unique resource for investigating injury mechanisms and risk factors. In this study, a comprehensive standalone analysis of cervical spine dislocations captured in MVC databases was performed. METHODS: Epidemiologic, biomechanical, and injury data were extracted from three MVC databases. Logistic regression models were developed to determine the occupant, vehicle, and crash characteristics, as well as the global (inertial or impact) and regional (flexion, compression, etc.) loading mechanisms associated with the level of cervical spine dislocation (axial or sub-axial), and the occurrence of spinal cord injury (SCI) or facet fracture concomitant to dislocation. RESULTS: There was no association between global or regional injury mechanisms and the level of cervical spine dislocation. Sub-axial dislocations were typically due to head/face impact with the airbag or upper interior components, or a result of seatbelt restraint of the torso. Higher occupant age, lower BMI, partial/no ejection, and frontal and side configuration crashes (compared to rollovers) were associated with a higher likelihood of sub-axial, versus axial, dislocation. Amongst all dislocations, an increased likelihood of SCI was associated with impact injuries, airbag non-deployment, and complete ejection, while concomitant facet fracture was associated with the presence of regional compression. Severe crashes, partial ejections, and "utility vehicles" and "vans and trucks" (compared with "passenger vehicles") were associated with a higher risk of facet fracture concomitant to sub-axial dislocation. CONCLUSION: The findings of this study may be used to inform the loading modes to be simulated in future ex vivo or computational models seeking a better understanding of cervical spine dislocations.

Optimizing photocatalytic hydrogen evolution performance by rationally constructing S-scheme heterojunction to modulate the D-band center.

The research in the field of photocatalysis has progressed, with the development of heterojunctions being recognized as an effective method to improve carrier separation efficiency in light-induced processes. In this particular study, CuCo2S4 particles were attached to a new cubic CdS surface to create an S-scheme heterojunction, thus successfully addressing this issue. Specifically, owing to the higher conduction band and Fermi level of CuCo2S4 compared to CdS, they serve as the foundation and driving force for the formation of an S-scheme heterojunction. Through in-situ X-ray photoelectron spectroscopy and electron paramagnetic resonance analysis, the direction of charge transfer in the composite photocatalyst under light exposure was determined, confirming the charge transfer mechanism of the S-scheme heterojunction. By effectively constructing the S-scheme heterojunction, the d-band center of the composite photocatalyst was adjusted, reducing the energy needed for electron filling in the anti-bonding energy band, promoting the transfer of photogenerated carriers, and ultimately enhancing the photocatalytic hydrogen production. performance. After optimization, the hydrogen evolution activity of the composite photocatalyst CdS-C/CuCo2S4-3 reached 5818.9 µmol g-1h-1, which is 2.6 times higher than that of cubic CdS (2272.3 µmol g-1h-1) and 327.4 times higher than that of CuCo2S4 (17.8 µmol g-1h-1), showcasing exceptional photocatalytic activity. Electron paramagnetic resonance and in situ X-ray photoelectron spectroscopy have established a theoretical basis for designing and constructing S-scheme heterojunctions, offering a viable method for adjusting the D-band center to enhance the performance of photocatalytic hydrogen evolution.

Efficient Mercury Ion Detection in Water: CdTe/CdS/ZnS Quantum Dots as a Simple, Sensitive, and Rapid Fluorescence Sensor.

Mercury (Hg), a notorious heavy metal with detrimental impacts on human health and the environment, necessitates the development of precise measurement methods. This study introduces an expeditious and straightforward photochemical approach to synthesize thioglycolic acid (TGA)-stabilized CdTe/CdS/ZnS core/multi-shell quantum dots (QDs). The synthesized CdTe/CdS/ZnS QDs were comprehensively characterized using fluorescence spectroscopy, transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), Field Emission Scanning Electron Microscopy (FESEM), and X-Ray diffraction (XRD). XRD and EDS results confirmed the successful formation of CdTe/CdS/ZnS structure. Also, FESEM and TEM results showed that CdTe/CdS/ZnS QDs were spherical. Results showed that synthesized Exhibiting vibrant green fluorescence and notable quenching in the presence of Hg2+ ions, these QDs emerge as promising candidates for fabricating a fluorescent sensor. The proposed sensor demonstrates notable sensitivity to Hg2+, featuring a detection limit of 16.32 nM and a linear range from 20 nM to 70 nM. The sensor's selectivity was confirmed by analyzing various anions and cations. Moreover, when tested with tap water, river water, and agricultural samples, the sensor exhibited reliable performance, validated by Inductively Coupled Plasma (ICP) analysis. Additionally, CdTe/CdS/ZnS QDs immobilized on micro pads proved effective for on-site water sample analysis, presenting a versatile solution for environmental monitoring.

Regulatory roles of APS reductase in Citrobacter sp. XT1-2-2 as a response mechanism to cadmium immobilization in rice.

Citrobacter sp. XT1-2-2, a functional microorganism with potential utilization, has the ability to immobilize soil cadmium. In this study, the regulatory gene cysH, as a rate-limiting enzyme in the sulfur metabolic pathway, was selected for functional analysis affecting cadmium immobilization in soil. To verify the effect of APS reductase on CdS formation, the ΔAPS and ΔAPS-com strains were constructed by conjugation transfer. Through TEM analysis, it was found that the adsorption of Cd2+ was affected by the absence of APS reductase in XT1-2-2 strain. The difference analysis of biofilm formation indicated that APS reductase was necessary for cell aggregation and biofilm formation. The p-XRD, XPS and FT-IR analysis revealed that APS reductase played an important role in the cadmium immobilization process of XT1-2-2 strain and promoting the formation of CdS. According to the pot experiments, the cadmium concentration of roots, culms, leaves and grains inoculated with ΔAPS strain was significantly higher than that of wild-type and ΔAPS-com strains, and the cadmium removal ability of ΔAPS strain was significantly lower than that of wild-type strain. The study provided insights into the exploration of new bacterial assisted technique for the remediation and safe production of rice in cadmium-contaminated paddy soils.

Construction of a hollow heterojunction interface to accelerate the photocatalytic cleavage of lignin Cß-O bonds.

Photocatalytic splitting of the Cß-O bond is regarded as a prospective strategy for transforming lignin, and it is imperative to develop novel photocatalysts with effective photogenerated charges separation and solar absorption capacity. Herein, a novel hollow ZIF-8/CdS heterostructure photocatalyst was synthesized for the catalytic splitting of lignin Cß-O bonds. The photocatalytic cleavage rate of Cß-O bond of ligin ß-O-4 reached 30.3∙mmol∙h-1∙g-1 within 20 min under visible light exposure. It is noteworthy that the utilization of intricate natural lignin molecules in this photocatalytic system has yielded successful depolymerization. The DFT and XPS results indicate a potential unidirectional electron migration from ZIF-8 to CdS in ZIF-8/CdS composites transfer. This electron transport path follows the direct Z-scheme heterostructure mechanism, resulting in the generation of an internal electric field between ZIF-8 and CdS. Impressively, the synergistic combination of the hollow structure and Z-scheme heterostructure effectively enhances the efficiency of charge carrier separation and maintains a robust redox potential, thereby facilitating Cα-radical generation. This study proposes a novel photocatalyst design strategy that integrates hollow structures and Z-scheme heterojunctions, with the aim of targeting the depolymerization of the Cß-O bond in lignin.

Adherence to integrated management of childhood illness (IMCI) guidelines by community health workers in Kano State, Nigeria through use of a clinical decision support (CDS) platform.

BACKGROUND: The World Health Organization (WHO) Integrated Management of Childhood Illness (IMCI) guidelines established in 1992 to decrease preventable under-five child morbidity and mortality, was adopted by Nigeria in 1997. Over 20 years later, while under-five child mortality remains high, less than 25% of first level facilities have trained 60% of community health workers (CHW) who care for sick children with IMCI. This study investigated the impact in CHWs overall adherence to IMCI guidelines, particularly for critical danger signs, as well as usability and feasible following the implementation of THINKMD's IMCI-based digital clinical decision support (CDS) platform. METHODS: Adherence to IMCI guidelines was assessed by observational and digital data acquisition of key IMCI clinical data points by 28 CHWs, prior, during, and post CDS platform implementation. Change in IMCI adherence was determined for individual CHW and for the cohort by analyzing the number of IMCI data points acquired by each CHW per clinical evaluation. Consistency of adherence was also calculated by averaging the percentage of total evaluations each data point was observed. Usability and acceptability surveys were administered following use of the CDS platform. RESULTS: THINKMD CDS platform implementation notably enhanced the CHWs' ability to capture key IMCI clinical data elements. We observed a significant increase in the mean percentage of data points captured between the baseline period and during the CDS technology implementation (T-test, t = -31.399, p < 0.016, Holm-Bonferroni correction, two-sided), with the mean values going from 30.7% to 72.4%. Notably, even after the completion of the technology implementation phase, the mean percentage of IMCI elements captured by CHWs remained significantly elevated compared to the baseline, with a 26.72 percentage point increase (from 30.7% to 57.4%, T-test, t = -15.779, p < 0.05, Holm-Bonferroni correction, two-sided). Usability and feasibility of the platform was high. CHWs reported that the CDS platform was easy to learn and use (93%) and enabled them to identify sick children (100%). CONCLUSION: These results demonstrate that utilization of a digital clinical decision support tool such as THINKMD's IMCI based CDS platform can significantly increase CHW adherence to IMCI guidelines over paper-based utilization, increase clinical quality and capacity, and improve identification of key danger signs for under-five children while being highly accepted and adopted.

Facile synthesis of a novel CeCO3OH@(H/C-CdS) catalyst with synergistic effect of heterophase junction and heterojunction for enhanced visible-light photocatalytic degradation efficiency at room temperature.

A new CeCO3OH@(hexagonal/cubic phases-CdS) (CeCO3OH@(H/C-CdS)) composite catalyst was facilely synthesized by a simple microinjection titration-stirring method, in which CdS nanoparticles were dispersed on the surface of CeCO3OH nanolines. The optimal conditions for the preparation of composite catalysts with high photocatalytic performance were determined by single-factor experiments and response surface experiments. Under these conditions, the degradation rate of 30 mL 2.000 g/L rhodamine B (Rh B) by CeCO3OH@(H/C-CdS) in a photocatalytic reaction for 1 h at 25 °C was up to 86.81 % and its degradation rate in a photocatalytic reaction for 150 min was up to 99.62 %. The degradation rate could be maintained above 80 % even after six times recycling. Especially, the photocatalytic degradation efficiency of 2.000 g/L Rh B on the composite catalyst under sunlight and at room temperature for 30 min reached 97.66 %. Meanwhile, the large size of CeCO3OH considerably alleviated the agglomeration of CdS, providing more adsorption and active sites for visible light-mediated degradation of Rh B. Importantly, the Z-scheme charge transfer realized by CdS and CeCO3OH enhanced the efficient separation of photogenerated electrons and holes, and successfully inhibited the recombination of photogenerated electrons with holes. At the same time, owing to the low energy band difference between the two phases of CdS, charge was transferred between the hexagonal and cubic phases, leaving more effective photogenerated charge to participate in the degradation of Rh B. The synergism of the heterophase junction and heterojunction and the presence of oxygen and sulfur vacancies considerably enhanced the degradation performance of the catalyst. Thus, this study provides a new strategy for the modification and enhanced visible-light catalysis performance of CdS-based catalysts.

Construction of An Artificial Photosynthesis System with A Single CdS QDs-Ferritin Hybrid Molecule.

Establishing artificial photosynthesis systems in a simple but effective manner to mitigate the greenhouse effect and address the energy crisis remains challenging. The combination of photocatalysis technology with bioengineering is an emerging field with great potential to construct such artificial photosynthesis systems, but so far, it has barely been explored in this area. Herein, an artificial photocatalysis platform is constructed with high CO2 conversion and H2O splitting capability by integration of CdS QDs into the intra-subunit interface of H-type ferritin (Marsupenaeus japonicus), a natural ferroxidase through protein interface redesign. The crystal structure of the synthesized CdS QDs with engineered ferritin molecules as bio-templates confirmed the design at an atomic level. Notably, upon absorbing desirable visible light (≈420 nm), such a single CdS-ferritin hybrid molecule is able to selectively catalyze the reduction of CO2 into HCOOH (≈90%), meanwhile catalyzing the oxidation of H2O into O2 in an aqueous environment. The O2 production rate reached to 180 µmol g-1 h-1, and the HCOOH output hit almost 800 µmol g-1 h-1. This work advances the utilization of the four-helix bundle structure for crafting artificial photosynthesis systems, facilitating the seamless integration of bioengineering and photocatalysis technology.

Ultrasensitive pH-switchablenitrogen doped carbon dots for MnO4- detection and fluorescent anti-counterfeiting.

Herein, high-efficiency green fluorescence nitrogen doped CDs (G-CDs) were prepared using acetaminophen and ethylenediamine as precursors. The G-CDs exhibited good anti-photobleaching, salttolerance and low cytotoxicity. Interestingly, the G-CDs revealed excellent fluorescence stability in the pH range of 6-12, however, the intensity of the G-CDs was almost completely quenched in other pH values. The MnO4- demonstrated strong fluorescence quenching capability on our G-CDs with the mechanism involving dynamic quenching caused by energy transfer. G-CDs exhibited a strong linear relationship with MnO4- concentration in the range of 0-75 µmol/L, with a low limit detection of 7.6 nmol/L. What was even more interesting was that the G-CDs displayed bright green solid-state fluorescence, and exhibited potential application in anti-counterfeiting.

Carbon dots for efficient detection of water content in organic solvents.

The trace amount of water in organic solvents can affect the progress of chemical reactions, which will adversely affect chemical production in many industries, resulting in a doubling of costs. In this work, carbon dots (CDs) with abundant polar groups were synthesized by a simple one-step hydrothermal method. The prepared CDs showed superior dispersibility and fluorescence performance compared to the CDs that have been reported for the detection of water content in organic solvents. It can realize the fluorescence detection of trace water in several water-soluble organic solvents such as N,N-dimethylformamide, ethanol and methanol with wide linear range (0 %-100 %) and high sensitivity. This will provide a powerful tool for the rapid detection of water content in organic solvents in chemical production.

Construction of CDs@ß-CD@CCM ratiometric fluorescence probe for FRET-based ClO--sensing.

ß-Cyclodextrin (ß-CD)-functionalized carbon quantum dots (CDs) loaded with curcumin (CCM) were used for ClO-sensing with high sensitivity and selectivity. This fluorescence resonance energy transfer (FRET)-based sensor was created through attaching CCM to the CDs via ß-CD linker. CCM could get into the interior of ß-CD triggering the FRET from CDs to CCM, providing an 'off' state of the CDs. However, the effect of FRET was weakened by the ClO-, because the o-methoxyphenol structure from CCM was oxidized to be benzoquinone. The fluorescence intensity of CDs@ß-CD@CCM at 440 nm can be heightened and 520 nm from CCM can decrease along with the increased ClO-. Therefore, a ratiometric fluorescence probe for ClO-sensing is successfully constructed. It conforms to a polynomial curve equation which is I440/I520= -0.0268 + 0.0315 CClO-+ 0.0055[CClO-]2(R2= 0.9958) between 0 and 18.4µM ClO-. Furthermore, we also obtain excellent results using this spectrophotometric method for ClO--sensing in pure water and commercial disinfectants, which afford potential in the environment monitoring area. We expect this sensing platform could be helpful in other analogous probes in relevant fields.

In-situ construction of biomineralized cadmium sulfide-Rhodopseudomonas palustris hybrid system: Mechanism of synergistic light utilization.

Sulfide biomineralization is a microorganism-induced process for transforming the environmentally hazardous cadmium into useful resource utilization. This study successfully constructed cadmium sulfide nanoparticles-Rhodopseudomonas palustris (Bio-CdS NPs-R. palustris) hybrids. For the self-assembling hybrids, Bio-CdS NPs were treated as new artificial-antennas to enhance photosynthesis, especially under low light (LL). Bacterial physiological results of hybrids were significantly increased, particularly for cells under LL, with higher enhancement photon harvesting ability. The enhancement included the pigment contents, and the ratio of the peripheral light-harvesting complex Ⅱ (LH2) to light-harvesting Ⅰ (1.33 ± 0.01 under LL), leading to the improvements of light-harvesting, transfer, and antenna conversion efficiencies. Finally, the stimulated electron chain of hybrids improved bacterial metabolism with increased nicotinamide adenine dinucleotide (NADH, 174.5% under LL) and adenosine triphosphate (ATP, 41.1% under LL). Furthermore, the modified photosynthetic units were induced by the up-regulated expression of fixK, which was activated by reduced oxygen tension of the medium for hybrids. fixK up-regulated genes encoding pigments (crt, and bch) and complexes (puf, pucAB, and pucC), leading to improved light-harvesting and transfer, and transform ability. This study provides a comprehensive understanding of the solar energy utilization mechanism of in-situ semiconductor-phototrophic microbe hybrids, contributing to further theoretical insight into their practical application.

Electrostatic Self-Assembly of CdS Quantum Dots with Co9S8 Hollow Nanotubes for Enhanced Visible Light Photocatalytic H2 Production.

CdS quantum dots (CdS QDs) are regarded as a promising photocatalyst due to their remarkable response to visible light and suitable placement of conduction bands and valence bands. However, the problem of photocorrosion severely restricts their application. Herein, the CdS QDs-Co9S8 hollow nanotube composite photocatalyst has been successfully prepared by loading Co9S8 nanotubes onto CdS QDs through an electrostatic self-assembly method. The experimental results show that the introduction of Co9S8 cocatalyst can form a stable structure with CdS QDs, and can effectively avoid the photocorrosion of CdS QDs. Compared with blank CdS QDs, the CdS QDs-Co9S8 composite exhibits obviously better photocatalytic hydrogen evolution performance. In particular, CdS QDs loaded with 30% Co9S8 (CdS QDs-30%Co9S8) demonstrate the best photocatalytic performance, and the H2 production rate reaches 9642.7 µmol·g-1·h-1, which is 60.3 times that of the blank CdS QDs. A series of characterizations confirm that the growth of CdS QDs on Co9S8 nanotubes effectively facilitates the separation and migration of photogenerated carriers, thereby improving the photocatalytic hydrogen production properties of the composite. We expect that this work will facilitate the rational design of CdS-based photocatalysts, thereby enabling the development of more low-cost, high-efficiency and high-stability composites for photocatalysis.

Visible-Light-Induced Silk Fibroin Hydrogels with Carbon Quantum Dots as Initiators for 3D Bioprinting Applications.

Digital light processing (DLP) 3D bioprinting technology has attracted increasing attention in tissue engineering in recent years. However, it still faces significant technical and operational challenges such as cell carcinogenesis caused by prolonged exposure to ultraviolet light and the presence of heavy metal ions in complex photoinitiator systems. In this study, a novel strategy is designed to introduce carbon quantum dots into visible-light-induced silk fibroin bioink as initiators (CDs/SilMA) applied for DLP 3D bioprinting technology. The incorporation of carbon quantum dots facilitates the formation of precise hydrogel structures at 415 nm visible wavelength, enabling the creation of brain, bronchus, spine, and ear models. Replacing heavy metal photoinitiators with carbon quantum dots imparts fluorescence properties to the bioink and enhances its mechanical properties. Meanwhile, the fibroin protein-based hydrogel exhibits favorable properties, such as drug loading, slow release, degradability, and biocompatibility. This is the first study to propose the application of carbon quantum dots in silk fibroin-based bioink. Moreover, the resulting product demonstrates excellent compatibility with the DLP printing process, making it promising for practical applications in various tissue engineering scenarios with specific requirements.

Donor-Acceptor Type Supra-Carbon-Dots with Long Lifetime Photogenerated Radicals Boosting Tumor Photodynamic Therapy.

Carbon dots (CDs) have gained significant interest because of their potential in biomedical applications. Nevertheless, developing CDs with efficient photoinduced charge separation for tumor photodynamic therapy (PDT) remains a challenge. This study presents a novel class of supra-carbon-dots (supra-CDs) developed by fusing red emissive CDs with 2,3-dicyanohydroquinone (DCHQ) via post-solvothermal treatment. In supra-CDs, the core, acting as electron donors, is formed by assembled CDs with substantial sp2 domains, the fused interface originating from DCHQ with electron-withdrawing groups functions as the electron acceptor. This configuration creates the unique donor-acceptor nanostructure. Upon white light irradiation, the excited electrons from the assembled CDs were transferred to the electron-withdrawing interface, whereas the photogenerated holes were retained within the assembled CDs as radicals, leading to effective photoinduced charge separation. The separated photogenerated electrons then react with oxygen to generate superoxide radicals. Simultaneously, the photogenerated holes undergo oxidation of crucial cellular substrates. This dual action underscores the exceptional cell-killing efficacy of supra-CDs. Moreover, the increased particle sizes (~20 nm) ensure supra-CDs to exhibit a notable capacity for tumor accumulation via the improved permeability and retention effect, thereby achieving satisfactory anti-tumor PDT efficacy in a mouse subcutaneous tumor model.