Pilot study for three-dimensional cephalometric Enlow's counterpart analysis: Vertical track. Two-dimensional and three-dimensional comparison.

BACKGROUND: The introduction of cone beam computed tomography (CBCT) in dentistry has given orthodontists the possibility of studying craniofacial structures in three dimensions. Despite the possibility to obtain lateral cephalograms synthesized from CBCT, this approach still does not provide a fully three-dimensional evaluation of the patient's anatomy. While there has been some success in adapting traditional two-dimensional cephalometric analyses to three dimensions, the specific application of Enlow's cephalometric analysis using CBCT remains unexplored. AIM: This pilot study aims to introduce a novel approach for performing Enlow's vertical track analysis using CBCT images. MATERIALS AND METHODS: Eighteen CBCT images of skeletal Class I (ANB = 2 ± 2) subjects (12 males and 6 females, aged from 9 to 19 years) with no history of previous orthodontic treatment were selected. For each subject, 2D Enlow's vertical track analysis was performed on lateral cephalograms extracted from the CBCT images, and separately, 3D vertical track analysis was directly performed on the CBCT images. To validate the proposed method, we compared the differences between the posterior vertical counterpart (PVC) and the middle vertical counterpart (MVC), as well as between the middle vertical counterpart (MVC) and the anterior vertical counterpart (AVC), as obtained from both the two-dimensional and three-dimensional analyses. The Kolmogorov-Smirnov normality test was applied for each variable to check whether data were normally distributed and a paired Student's t-test was performed. The level of statistical significance was .05. RESULTS: The comparison between three-dimensional PVC-MVC (-0.43 ± 0.37 cm) and two-dimensional PVC-MVC (-0.53 ± 0.36 cm) revealed no statistical difference (P = .27). Similarly, no significant difference (P = .28) was observed between two-dimensional MVC-AVC (-0.56 ± 0.34 cm) and three-dimensional MVC-AVC (-0.47 ± 0.37 cm). CONCLUSIONS: The method proposed by this study to realize the vertical track analysis on 3D images is valid and superimposable on that described by Enlow on lateral cephalograms.

Comparative Assessment of Various Cephalometric Parameters Used for Determining Vertical Skeletal Dysplasia.

INTRODUCTION: The aim of the study is to assess and correlate the different cephalometric parameters used to determine the vertical jaw relationship. METHODS: Cephalometric radiographs from 148 patients were assessed and comparison was made using all eight parameters. Statistical analysis was performed using mean, standard deviation and coefficient of variance. A correlation was found between different variables using the Pearson's correlation coefficient. RESULTS: In the entire sample, the basal plane angle displayed the most variable distribution, while the R angle displayed the most homogeneous distribution. There was a significant correlation found between the Jarabak ratio, Steiner's mandibular plane angle (SN-GoGn), Frankfort mandibular plane angle (FMA), R angle, and DR angle. There was a moderate to weak correlation between the Y-axis, basal plane angle, and facial height ratio with other skeletal analyses. CONCLUSION: Among angular variables DR angle, R angle, SN-GoGn and FMA can be used and among linear variables Jarabak ratio could be used reliably to assess the growth pattern. It suggested that in order to obtain an accurate evaluation of the vertical jaw relationship, a variety of measurements should be combined.

Cephalometric Evaluation in Patients with Obstructive Sleep Apnea undergoing Lateral Pharyngoplasty.

Introduction Lateral pharyngoplasty (LP) has shown promising results. Craniofacial deformity reduces the pharyngeal space, contributing to the etiopathogenesis. The analysis of craniofacial features can be performed using cephalometry. Objective To verify if craniofacial deformity is associated with worse polysomnographic data in patients with obstructive sleep apnea (OSA), and to verify if the preoperative cephalometric parameters can interfere with the surgical success of the LP. Methods The study included 21 patients with OSA aged between 18 and 65 years who underwent LP in a university hospital from 2015 to 2019. Polysomnography was performed postoperatively, after a minimum period of 6 months from the surgical procedure. In addition, a cephalometric evaluation was performed to assess craniofacial deformity, and to correlate it with the polysomnographic results. Results The mean and median of all polysomnographic respiratory parameters improved postoperatively, especially the apnea-hypopnea index (AHI), which went from 40.15 to 16.60 events per hour ( p = 0.001). Of the 21 patients, 15 showed improvements in the AHI postoperatively. As for the cephalometric evaluations, we found that the longer the distance between the hyoid bone and the mandibular plane, the greater the patient's preoperative AHI ( p = 0.011). When assessing whether cephalometric changes related to craniofacial deformities influence the surgical outcome of LP, no correlation was found for any cephalometric measurement. Conclusion The longer the distance between the hyoid bone and the mandibular plane, the greater the preoperative AHI, and LP was an effective OSA treatment. Cephalometric variables are not able to modify or determine the success of LP in apneic patients in the population assessed.

Alterations in Sphenoid Anatomy in Craniosynostosis: Implications for Fronto-Orbital Advancement.

OBJECTIVE: Fronto-orbital advancement involves removal of the fronto-orbital bandeau. Visualization of the saw blade is lost as it passes through the fronto-orbital-sphenoid junction (FOSJ), placing the temporal lobe at risk of injury. We aim to provide a 3D analysis of the space surrounding this osteotomy to differentiate various types of craniosynostoses. DESIGN: Retrospective cohort. SETTING: Institutional. PATIENTS: Thirty patients with isolated unicoronal synostosis, nonsyndromic bicoronal synostosis, metopic synostosis, Apert syndrome, Crouzon syndrome, and Muenke syndrome. INTERVENTIONS: CT scans conducted between 2 months to 2 years of age were 3D reconstructed to compare craniometrics against normal controls. MAIN OUTCOME MEASURE(S): Craniometrics. RESULTS: The mean bone thickness of the FOSJ at the level of the supraorbital rim was significantly small for the Apert, unicoronal and bicoronal groups. The mean vertical height of the middle cranial fossa from the lesser sphenoid wing was significantly greater in the unicoronal group. The mean vertical height of the tip of the temporal lobe from the lateral sphenoid ridge was greater in the unicoronal, isolated bicoronal, and Apert groups. The mean corneal protrusion beyond the lateral orbital rim was significantly greater in the Apert and unicoronal groups. The mean horizontal depth of the orbit was smallest in the Apert group. The mean vertical distance between the dacryon and the foramen cecum, and the mean volume of temporal lobe beneath the sphenoid shelf were the largest in the Apert group. CONCLUSIONS: Patients with Apert syndrome have the most unfavorable morphology of the anterior and middle cranial fossae.

Perception of maxillary incisor inclination and its correlation with dental cephalometric measurements.

OBJECTIVE: To correlate the clinical perception of maxillary incisor inclination from photographs of the smiling face with cephalometric measurements, using conventional incisor axis reference points and crown reference points. DESIGN: Cross-sectional study. SETTING: Department of Orthodontics, School of Dentistry, University of Lisbon (Portugal). PARTICIPANTS: Eight orthodontists. METHODS: The perception of maxillary incisor inclination of 47 female patients (mean age 23.4 ± 1.5 years) was evaluated by eight orthodontists. The participants' photographs (smiling frontal, smiling three-quarter and smiling profile) were shown to each assessor and a continuous visual analogue rating scale was used to assess the perception of maxillary incisor inclination. Pearson's correlation and linear regression were calculated between each cephalometric measurement and the perception of incisor inclination. RESULTS: Anatomical crown inclination measurements U1ac-FH (r = 0.854; P < 0.01) and U1ac-SN (r = 0.845; P < 0.01) had the highest correlation values with the assessors' perception of maxillary incisor inclination. Conventional incisor axis measurements showed the lowest correlation values (r = 0.668-0.756). CONCLUSION: Cephalometric measurements of the labial surface of the anatomical crown of the maxillary incisors showed the strongest correlations with the clinical perception of maxillary incisor inclination from photographs. For optimal aesthetics, the inclination of the labial surface of maxillary incisor crown should be evaluated.

Genetic and environmental impact on mandibular growth in mono- and dizygotic twins during adolescence: A retrospective cohort study.

INTRODUCTION: This study aimed to discover the genetic and environmental factors that contribute to the mandibular development of untreated monozygotic and dizygotic twins. MATERIAL AND METHODS: The sample, taken from the Forsyth Moorrees Twin Study, included 52 untreated monozygotic twins (36 male, 16 female) and 46 untreated dizygotic twins (23 male, 23 female). At the ages of 12 and 17, lateral cephalograms were collected and traced to assess total mandibular length, mandibular ramus length, mandibular corpus length, gonial angle, SNB, and bony chin prominence. The genetic and environmental components of variation were assessed using multilevel mixed-effects structural equation modelling. RESULTS: At 12 years of age, high additive genetic influences were observed for total mandibular length (74%), gonial angle (76%), SNB (41%), and bony chin prominence (64%), whereas strong dominant genetic components were observed for corpus length (72%), and mandibular ramus length was under unique environment influence (54%). At 17 years of age, only total mandibular length (45%), ramus length (53%), gonial angle (76%), and bony chin prominence (68%) were under strong additive genetic control, while the remainder were under strong dominant genetic control. CONCLUSIONS: Although monozygotic and dizygotic twins share at least a portion of their DNA, additive, dominant, or environmental components were discovered during adolescence. Nonetheless, by the age of 17, the majority of the mandibular traits are under either additive or dominant genetic impact.

The Relationship between Maxillary Sinus Volume and Different Cephalometric Characteristics in Orthodontics.

Introduction: This study aimed to evaluate the maxillary sinus volume (MSV) in both genders in a Saudi sample and among different skeletal patterns. Materials and Methods: This retrospective cross-sectional study included 52 cone-beam computed tomography (CBCT) scans of 18 years or older individuals with complete dentition and healthy medical history. MSV was measured as the mean value of both sides in cubic millimeters (mm3) using OnDemand three-dimensional™ Dental. Cephalometric tracings were conducted on cephalograms obtained from CBCT scans. The beta, A × B, and Frankfort-mandibular plane angles were selected to determine the sagittal and vertical skeletal patterns of the study subjects. Descriptive statistics and other tests were conducted. The significance level was set at P < 0.05. Results: Fifty-two CBCT scans were included in this study (23 males and 29 females), with a mean age of 36 (±14) years. The mean MSV was 14887 (±5030.79) mm3. Males had statistically significantly larger MSV (16517 ± 5335 mm3) compared with females (13595 ± 4,452 mm3) (P = 0.036). There was no statistically significant difference in MSV among all other cephalometric measurements (P > 0.05). Conclusions: The MSV in the studied Saudi sample was larger among males. However, different skeletal patterns have no statistically significant differences in MSV.

Germenectomía de los terceros molares con cefalometría predictiva de brote

Introducción: Las complicaciones, asociadas al brote anormal de los terceros molares, es posible evitarlas con la germenectomía de estos dientes. Objetivo: Caracterizar la evolución de la germenectomía de terceros molares en pacientes con diagnóstico cefalométrico de brote anormal. Métodos: Se realizó un estudio observacional, descriptivo y transversal en el Servicio de Cirugía Maxilofacial del Hospital Provincial "Saturnino Lora Torres", desde febrero de 2019 hasta marzo de 2021. Se estudiaron 32 pacientes de 13 a 15 años de edad, interviniéndose quirúrgicamente 78 terceros molares. Las variables fueron edad, sexo, color de la piel, localización y posición del tercer molar; así como las complicaciones trans y posoperatorias y la evolución. Resultados: Entre los 32 pacientes incluidos en el estudio predominó el sexo femenino (62,5 por ciento) y la edad de 14 años (40,6 por ciento). Las complicaciones ocurridas durante la germenectomía fueron más frecuentes en la arcada inferior. Aunque no fueron detectadas diferencias estadísticamente significativas según localización (valor de p>0,05); con 30 transoperatorias para un 38,4 por ciento y 75 posoperatorias para un 96,2 por ciento. Conclusiones: Se evidencia una evolución marcadamente favorable posterior a la germenectomía de terceros molares en la población de pacientes con diagnóstico cefalométrico de brote anormal. En ellos el sangrado transoperatorio y el dolor posoperatorio constituyen las complicaciones a considerar en este tipo de procedimiento quirúrgico(AU)

Introduction: Complications associated with the abnormal eruption of third molars can be avoided with germenectomy of these teeth. Objective: To characterize the evolution of third molar germenectomy in patients with a cephalometric diagnosis of abnormal bud. Methods: An observational, descriptive and cross-sectional study was carried out in the Maxillofacial Surgery Service at Saturnino Lora Torres Provincial Hospital, from February 2019 to March 2021. Thirty two patients aged 13 to 15 years were studied, with 78 third molars undergoing surgery. The variables were age, sex, skin color, location and position of the third molar; as well as trans and postoperative complications and evolution. Results: Among the 32 patients included in the study, the female sex (62.5 percent) and the age of 14 years (40.6 percent) predominated. Complications that occurred during germenectomy were more frequent in the lower arch. Although no statistically significant differences were perceived according to location (p value > 0.05); with 30 intraoperative for 38.4 percent and 75 postoperative for 96.2 percent. Conclusions: There is evidence of a markedly favorable evolution after germenectomy of third molars in the population of patients with cephalometric diagnosis of abnormal bud. In them, transoperative bleeding and postoperative pain are the complications to consider in this type of surgical procedure(AU)

Is There a Need for Greater Emphasis on Clinical Facial Analysis than Cephalometrics & 3D Software Solutions in the Diagnosis and Treatment Planning of Patients with Dentofacial Deformities?

Purpose: This study is designed to evaluate the need for a greater emphasis on clinical facial analysis over cephalometrics in the diagnosis and treatment planning of patients with dentofacial deformities. Materials and Method: A predetermined questionnaire study was designed to get the thought process of surgeons and consultants involved in orthognathic surgery from various parts of southern India. Two hundred and twenty-eight maxillofacial consultants were involved in the survey. Demographic information, type of professional practice, preferred tool in the diagnosis & treatment planning: Cephalometrics or 3D software solutions and flaw in the available tools were evaluated. Results: The results of this study revealed that only 36.8% of the consultants felt that cephalometrics is the prime tool and 73.3% of the consultants felt that 3D software solutions were superior to cephalometrics in the diagnosis and treatment planning of patients with dentofacial deformities. However, 46% of the consultants preferred facial analysis as the prime tool with cephalometrics as an adjunct. Pertaining to the clinical outcome of their treated cases of dentofacial deformities, 61.8% of the consultants felt the need to address additional cosmetic issues following an orthognathic procedure. It was observed that 92.1% of the participants felt the need for greater emphasis on clinical facial analysis than cephalometrics. Conclusion: Human faces should always be evaluated taking into consideration the various esthetic units of the face. Performing corrective jaw surgery merely based on cephalometric values inevitably fails to address the various other innate imbalances of the face. Hence, cephalometric data should only be considered as an adjunct to clinical judgment in the diagnosis and treatment planning of dentofacial deformities.

Effect of SEC III protocol on upper airway dimensions in growing class III patients: a retrospective study.

BACKGROUND: The primary objective of the study was to evaluate the effects of SEC III (Splints, Class III Elastics, and Chin cup) protocol on the upper airway dimensions using lateral cephalometric radiographs. The secondary objectives were to evaluate the skeletal and dental effects of the SEC III protocol using lateral cephalometric radiographs. METHODS: The pre- and post-treatment lateral cephalometric radiographs of 24 patients treated using the SEC III protocol were used to address the aim of the study. Children in the pre-pubertal (CS-1 or CS-2) or circumpubertal (CS-3 or CS-4) skeletal maturation stage and having class III dentoskeletal malocclusion were included in the study. Patients with a history of previous orthodontic treatment, maxillofacial surgery or trauma, tonsillectomy, adenoidectomy, or craniofacial malformations were excluded. The pre-treatment and post-treatment lateral cephalometric radiographs were traced, then airway measurements, skeletal measurements, and dental measurements were performed. The results were analysed using paired samples t-test or Wilcoxon signed rank test according to the data normality. RESULTS: Data of 6 males and 18 females were analysed (Mean age = 11.21 ± 1.02 years). Duration of active treatment was 5.75 ± 1.03 months. Treatment using SEC III protocol resulted in a significant increase in ANB angle (2.92 ± 1.50 degrees, p < 0.001) and Wits appraisal (3.31 ± 1.99 mm) (p < 0.001). The increase in the mandibular plane angle (0.75 ± 1.42 degrees, p = 0.02) and the maxillary length (2.29 ± 2.69 mm, p < 0.001) was statistically significant. Contrarily, the mandibular length did not change significantly (p = 0.10). The maxillary incisors were significantly proclined (4.38 ± 4.28 degrees; p < 0.001), while the mandibular incisors were significantly retroclined (-5.79 ± 6.21 degrees; p < 0.001) following treatment. The change in the nasopharyngeal airway and the retropalatal airway was not statistically significant. The middle and inferior pharyngeal space (retroglossal airway) significantly decreased by 1.33 ± 1.97 mm (p = 0.003) and 1.96 ± 2.48 mm (p = 0.001), respectively. CONCLUSIONS: Early class III correction using SEC III protocol reduced the retroglossal airway dimensions but did not affect the nasopharyngeal and retropalatal airway dimensions. Correction of the class III dentoskeletal relationship was obtained through both skeletal and dental changes.

Long-Term Assessment of Treatment Timing for Rapid Maxillary Expansion and Facemask Therapy Followed by Fixed Appliances: A Multicenter Retro-Prospective Study.

BACKGROUND: to determine the role of treatment timing in the long-term effects produced by rapid maxillary expansion and facemask therapy (RME/FM) in Class III patients. METHODS: This study compared two sample groups treated with RME/FM followed by fixed appliances: the early prepubertal group (EPG) (17 patients; mean age before treatment (T0), 5.8 ± 0.7 years; range, 4.3-6.9 years) and the late prepubertal group (LPG) (17 patients; mean age at T0, 10.1 ± 0.8 years; range, 9.0-11.1 years). Lateral cephalograms for the two groups were examined before treatment (T0) and at a long-term observation (T1) (EPG, 19.8 ± 1.0 years; LPG, 21.0 ± 2.1 years). Independent sample t-tests were performed to compare the two groups at T0 and T1. RESULTS: No statistically significant differences were found for any of the cephalometric variables at T0, except for the total mandibular length, overjet, and inclination of the maxillary incisors to the palatal plane, which were greater in the LPG. At T1, no statistically significant differences were detected for any of the cephalometric variables. CONCLUSIONS: There were no significant long-term differences when treating Class III patients with RME/FM, either during an early prepubertal phase (≤7 years of age) or during a late prepubertal phase (≥9 years of age).

Age Estimation using Cephalometrics-A Cross-Sectional Study among Teenagers of Salem District, Tamil Nadu.

Background: Age estimation is important not only in identifying dead body of a person but also in living persons since there is an increasing rate of juvenile delinquencies recorded every year. To avoid foul play by age fabrication, legal age estimation becomes important. Facial growth alteration takes place in the jawbones as age advances which can be observed with lateral cephalometry. Thus, the aim of the study is to create a regression formula for age estimation using cephalometrics of teenagers in Salem population. Materials and Methods: A cross-sectional study was done using 770 lateral cephalometrics of teenagers (13-19 yrs) in Salem population. Nine cephalometric points with two linear hard tissue measurements (condylion to mandibular plane (AFH) and palatal plane to menton (PFH)) and one angular soft tissue measurement (z angle) were recorded as predictor variables using a digital lateral cephalometric software (Carestream CS8100 SC) which were subjected to regression analysis using SPSS version 21.0 to develop a formula for age estimation. Results: Significant association on age was obtained for the two linear measurements. The regression formula generated for estimating the age was Age = 7.146 + 0.044 (AFH) + 0.146 (PFH) with R2 value = 0.674. Conclusion: Within the limitations of the present study, age estimation of teenagers in Salem population can be estimated. The predictability of the age can be increased by taking more cephalometric variables in generating the formula with increase in sample size.

Cephalometric Characteristics in Chilean Latino Population with Normal Occlusion and Harmonic Profiles in Permanent Dentition. A Retrospective Study / Características Cefalométricas en Población Latina Chilena con Oclusión Normal y Perfiles Armónicos en Dentición Permanente. Un Estudio Retrospectivo

SUMMARY: Malocclusion is usually treated based on clinical decisions complemented with a cephalometric analysis, allowing the comparison of an individual with standard reference norms. Cephalometric standards have mostly been obtained from Caucasian population, but may not be appropriate for other ethnic groups, becoming a clinically relevant problem in multicultural and multiracial societies. The present study aimed to establish cephalometric norms for Chilean-Latino population, using a representative sample of class I individuals in permanent dentition. A sample of 72 cephalometric x-rays of class I growing individuals (47 women and 25 men) between 10 and 20 years of age with class I occlusion and harmonic profile was obtained from the records of the Universidad de los Andes taken between 2012 and 2019, including 1164 individuals. The radiographs were classified according to their cervical vertebral maturation status, and cephalometrically analyzed, obtaining vertical and sagittal parameters in soft and hard tissues, which were compared with Caucasian cephalometric norms. The statistical analysis was performed using descriptive and inferential statistics (T-test, ANOVA and Bonferroni tests). Cephalometric norms were obtained for hard and soft tissues. Upon comparison with Caucasian norms, the subjects included in the sample present a tendency towards a convex profile, significant incisal proclination, dental protrusion, labial biprotrusion and an acute nasolabial angle. There are cephalometric differences between the Caucasian cephalometric norms and those observed Chilean Latino population, displaying differences at a hard and soft tissue level that should be taken into account for clinical decision making in Orthodontics.

La maloclusión generalmente se trata con base en decisiones clínicas complementadas con un análisis cefalométrico, lo que permite la comparación de un individuo con normas de referencia estándar. Los estándares cefalométricos se han obtenido en su mayoría de población caucásica, pero pueden no ser apropiados para otros grupos étnicos, convirtiéndose en un problema clínicamente relevante en sociedades multiculturales y multirraciales. El presente estudio tuvo como objetivo establecer normas cefalométricas para población chileno-latina, utilizando una muestra representativa de individuos clase I en dentición permanente. Se obtuvo una muestra de 72 radiografías cefalométricas de individuos en crecimiento clase I (47 mujeres y 25 hombres) entre 10 y 20 años de edad con oclusión clase I y perfil armónico de los registros de la Universidad de los Andes tomados entre 2012 y 2019, incluidas 1164 personas. Las radiografías se clasificaron según su estado de maduración vertebral cervical, y se analizaron cefalométricamente, obteniendo parámetros verticales y sagitales en tejidos blandos y duros, que se compararon con normas cefalométricas caucásicas. El análisis estadístico se realizó mediante estadística descriptiva e inferencial (T-test, ANOVA y pruebas de Bonferroni). Se obtuvieron normas cefalométricas para tejidos duros y blandos. En comparación con las normas caucásicas, los sujetos incluidos en la muestra presentan una tendencia hacia un perfil convexo, proinclinación incisal significativa, protrusión dental, biprotrusión labial y un ángulo nasolabial agudo. Existen diferencias entre las normas cefalométricas caucásicas y las observadas en población latina chilena, mostrando diferencias a nivel de tejidos duros y blandos que se deben considerar para la toma de decisiones clínicas en Ortodoncia.

Craniofacial Cephalometric Characteristics and Open Bite Deformity in Individuals with Amelogenesis Imperfecta-A Systematic Review and Meta-Analysis.

BACKGROUND: Individuals with amelogenesis imperfecta (AI) often present with malocclusions, especially a dental or skeletal anterior open bite (AOB). OBJECTIVES: To evaluate the craniofacial characteristics in individuals with AI. MATERIAL AND METHODS: A systematic literature search was conducted with the PubMed, Web of Science, Embase and Google Scholar databases to identify studies relating to the cephalometric characteristics of individuals with AI, without any language or publication date restrictions. The grey literature was searched using Google Scholar, Opengrey and Worldcat. Only studies with a suitable control group for comparison were included. Data extraction and a risk of bias assessment were carried out. A meta-analysis was performed using the random effects model for cephalometric variables that were evaluated in at least three studies. RESULTS: The initial literature search yielded 1857 articles. Following the removal of duplicates and a screening of the records, seven articles were included in the qualitative synthesis, representing a total of 242 individuals with AI. Four studies were included in the quantitative synthesis. The meta-analysis results showed that individuals with AI present a smaller SNB angle and larger ANB angle than those of control groups in the sagittal plane. In the vertical plane, those with AI present a smaller overbite and larger intermaxillary angle than those without AI. No statistically significant differences were found for the SNA angle when comparing the two groups. CONCLUSIONS: Individuals with AI seem to present with more vertical craniofacial growth, leading to an increased intermaxillary angle and decreased overbite. This possibly leads to a more retrognathic mandible with a larger ANB angle due to an anticipated posterior mandibular rotation.

Imaging study on the relationship between anterior and posterior occlusal planes and temporomandibular osteoarthrosis.

OBJECTIVES: The aim of this study was to compare the anterior and posterior occlusal plane characteristics of patients with different temporomandibular joint osseous statuses. METHODS: A total of 306 patients with initial cone beam CT (CBCT) and cephalograms were included. They were divided into three groups on the basis of their temporomandibular joint osseous status: bilateral normal (BN) group, indeterminate for osteoarthrosis (I) group, and osteoarthrosis (OA) group. The anterior and posterior occlusal planes (AOP and POP) of the different groups were compared. Then, the regression equation was established after adjusting for confounding factors, and a correlation analysis between the occlusion planes and other parameters was performed. RESULTS: SNA, SNB, FMA, SN-MP, Ar-Go, and S-Go were correlated with the occlusal planes. Relative to the BN and I groups, the FH-OP of the OA group increased by 1.67° on the average, FH-POP increased by 1.42° on the average, and FH-AOP increased by 2.05° on the average. CONCLUSIONS: The occlusal planes were steeper in the patients with temporomandibular osteoarthrosis than in the patients without it, and the mandible rotated downward and backward. The height of the mandibular ramus, the mandibular body length, and the posterior face height were small. In clinical practice, attention should be given to the potential risk of temporomandibular joint osteoarthrosis in such patients. In addition, SNB, FMA, SN-MP, Ar-Go, S-Go, and occlusal planes had moderate correlations.

Airway changes in patients with unilateral cleft lip/palate (UCL/P) after maxillary advancement.

OBJECTIVES: To assess the effect on the retropalatal airway (RPA), retroglossal airway (RGA), and total airway (TA) volumes and cephalometrics (SNA, SNB, ANB, PP-SN, Occl-SN, N-A, A-TVL, B-TVL) after maxillary advancement orthognathic surgery in patients with unilateral cleft lip/palate (UCL/P) using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: The CBCT scans of 30 patients (13 males and 17 females, 17-20 years old) with UCL/P were evaluated at two time points: preoperative (T1) and postoperative (T2). The interval between T1 and T2 ranged from 9-14 weeks, except for two patients in whom the interval was 24 weeks. Intraexaminer reliability was measured with an intraclass correlation coefficient test. A paired t-test was used to compare the airway and cephalometric measurements between T1 and T2, with a P value of .05 being considered significant. RESULTS: From T1 to T2, significant increases were found in the volumes of RPA (from 9574 ± 4573 to 10,472 ± 4767, P = .019), RGA (from 9736 ± 5314 to 11,358 ± 6588, P = .019), and TA (from 19,121 ± 8480 to 21,750 ± 10,078, P = .002). In addition, the RGA (from 385 ± 134 to 427 ± 165, P = .020) and TA (from 730 ± 213 to 772 ± 238, P = .016) sagittal area increased significantly. For minimal cross-sectional area (MCA), only the RPA increased significantly (from 173 ± 115 to 272 ± 129, P = .002). All cephalometric changes were statistically significant between T1 and T2 except for SNB. CONCLUSIONS: Maxillary advancement in patients with UCL/P produces statistically significant increases in the retropalatal (volumetric and MCA), retroglossal (volumetric and sagittal), and total (volumetric and sagittal) airways based on data from CBCT imaging.

Interobserver and Intraobserver Reliability of Cephalometric Measurements Performed on Smartphone-Based Application and Computer-Based Imaging Software: A Comparative Study.

Objective: The aim was to compare the reliability of cephalometric analysis using a smartphone-based application with conventional computer-based imaging software. Methods: Pre-treatment cephalometric radiographs of 50 subjects (26 males, 24 females; mean age, 19.2 years; ±4.2) were traced using the OneCeph® application and Dolphin imaging software®. Two independent observers identified seventeen landmarks and measured fourteen cephalometric measurements at an interval of. Interobserver and intraobserver reliability were evaluated using the intraclass correlation coefficient. Student's t-test was used to compare the means of two measurement methods for observer 1 and observer 2. Additionally, the time taken to complete the cephalometric measurements was also compared between the two methods. Results: Good (ICC 0.75-0.90) to excellent (ICC 0.90-1.00) interobserver and intraobserver reliability was observed for all hard and soft tissue measurements with both methods. No significant differences were found between the two measurement methods for both observers (p<0.05). OneCeph application took significantly more time to complete the analysis than Dolphin imaging software (p<0.001). Conclusion: Cephalometric measurements made through a smartphone-based application showed good to excellent interobserver and intraobserver reliability and are comparable with the computer-based software. Therefore, it can be recommended for clinical use. The time taken to complete the cephalometric measurements was more with a smartphone-based application (OneCeph application) compared to computer-based software (Dolphin imaging software).

An evaluation of dentofacial changes in Angle's class II division 1 patients using AdvanSync 2.

OBJECTIVES: The purpose of the study is as follows: To evaluate the dental and skeletal changes of the AdvanSync 2 appliance.To evaluate the soft tissue changes of the AdvanSync 2 appliance using photometric analysis. METHODS: The sample size consisted of 15 patients who reported to the Department of Orthodontics, seeking fixed orthodontic treatment. The effects of the AdvanSync 2 appliance were measured at two intervals. RESULTS: After the nine months, P values were observed to be less than 0.5, therefore statistically significant for parameters such as Sella-Nasion-Point A (SNA), Condylion-Point A (CO-A), University of Witwatersrand, Condylion-Gnathion (C0-Gn), point A-Nasion-Point B (ANB), Upper incisor-Point A (UI-A) (degree), LI-B (mm), Lower lip to Esthetic plane (LL-E plane), nasolabial angle, mentolabial angle, facial angle, and L lip to the chin. P values were however observed to be greater than 0.5, therefore statistically insignificant for parameters such as sella-Nasion-Point B (SNB), Condylion -gonion (C0-Go), UI A (mm), LI B (mm), UL-EPL, H LINE, Frankfurt mandibular plane (FMA), nose tip angle, nasofrontal angle, nasomental angle, upper lip angle, and U lip to the chin. CONCLUSIONS: AdvanSync 2 appliance brought about a change in Class II malocclusions through Co-Gn, Co-Go, ANB, FMA, UI-A (degree), UI A (linear) LI B (linear), Upper lip to Esthetic plane, LL-E plane, Holdaway LINE, nose tip angle, nasolabial angle, mentolabial angle, nasofrontal angle, nasomental angle, facial angle, upper lip angle, U lip to chin, L lip to the chin after nine months of appliance delivery. MAIN POINTS: AdvanSync 2 normalized class II by an increase in the length and body of the mandible.AdvanSync 2 has a restraining effect on the growth of the maxilla.AdvanSync 2 brings about positive soft tissue changes.The major disadvantage is the proclination of the lower incisors.

Accuracy of conventional versus cone-beam CT-synthesised lateral cephalograms for cephalometric analysis: A systematic review.

OBJECTIVE: To assess the accuracy of cone-beam computed tomography (CBCT)-synthesised lateral cephalograms (CSLCs) compared with conventional lateral cephalograms for cephalometric analysis in human participants and skull models. METHODS: The authors performed a search of PubMed, Scopus, Google Scholar and Embase databases on 4 October 2021. Included studies met the following criteria: published in English; compared conventional lateral cephalograms and CSLCs; assessed hard- and soft-tissue landmarks; and were performed on human or skull models. Data extraction from eligible studies was performed by two independent reviewers. The quality of evidence was assessed using the Joanna Briggs Institute (JBI) Critical Appraisal Checklist tool - diagnostic accuracy studies. RESULTS: A total of 20 eligible articles were included in this systematic review. Of these 20 studies, 17 presented with a low risk of bias, while three were found to have a moderate risk of bias. Hard- and soft-tissue analyses were evaluated for each imaging modality. The findings reveal that CSLCs are accurate and comparable to conventional lateral cephalograms for cephalometric analysis and demonstrate good inter-observer reliability. Four studies reported a higher accuracy with CSLCs. CONCLUSION: Overall, the diagnostic accuracy and reproducibility of CSLCs were comparable to conventional lateral cephalograms in cephalometric analysis. It is justified that patients who have an existing CBCT scan do not need an additional lateral cephalogram, minimising unnecessary radiation exposure, expenses and time for the patient. Larger voxel sizes and low-dose CBCT protocols can be considered to minimise radiation exposure. REGISTRATION: This study was registered with PROSPERO (CRD42021282019).

Cephalometric evaluation of deep overbite correction using anterior bite turbos.

OBJECTIVES: To evaluate the outcome of treating deep overbite (OB) using anterior bite elevators concurrently with a pre-adjusted edgewise appliance. MATERIALS AND METHODS: The Case Western Reserve University (CWRU) cephalometric analysis was used to isolate tipping movement of upper (TUI) and lower incisors (TLI), bodily tooth movement of upper (BUI), and lower incisors (BLI), as well as vertical skeletal changes in the anterior region of the maxilla (MXSK) and mandible (MNSK). Thirty treated subjects were examined at pretreatment (T1) and posttreatment (T2) and compared to an untreated control group matched on age, sex, and Angle malocclusion from the Bolton Brush Growth Study Collection (CWRU, Cleveland, Ohio). RESULTS: Overbite (OB) in the treated group was decreased significantly (P < .001) (-5.6 mm) compared to controls. Statistically significant (P < .001) changes were found for BUI (-0.7 mm), TUI (0.9 mm), TLI (-1.4 mm), BLI (-1.1 mm), and MNSK (-1.6 mm). Most of the overbite correction was in the lower arch and included tipping and intrusion of the lower incisors along with an increase in lower vertical facial height. CONCLUSIONS: Deep OB correction was achieved efficiently using anterior bite elevators with pre-adjusted edgewise appliance. Correction using bite turbos would be a treatment option for individuals presenting with decreased lower facial height and deep bite.