Orthognathic surgery: a significant tool for reassessment / La chirurgie orthognathique : un outil à ne pas oublier dans la réévaluation

Introduction: More than 15 years of experience in orthodontic-surgical collaboration has allowed the authors to identify some situations in which a new perspective is needed. Although it may seem easy to refer a patient to a maxillo-facial surgeon in cases of major dysmorphoses, this can lead to yet other dilemmas: a loss of results at the end of a developmental growth stage, an adult requesting a return to treatment after a camouflage orthodontic treatment or a non-cooperative child in an interceptive and preventive treatment phase. Then, a comprehensive process of reassessment becomes compulsory. Material and Method: In the form of an editorial, this article describes various cases encountered in the authors' practice. Discussion: The aim is not to point out the imperfections of our humanity, but simply to open our eyes to diagnostic elements that are missed, whether in the initial phase or during reassessment. Conclusion: As it is far from ideal to keep offering similar therapies that lead to the same pitfalls, it is time for a shift in the paradigm.

Introduction: Plus de 15 ans de recul en collaboration orthodontico-chirurgicale ont permis aux auteurs d'identifier un certain nombre de situations dans lesquelles un regard différent est devenu opportun. S'il est aisé d'orienter un patient vers un(e) chirurgien(ne) maxillo-facial(e) en cas de dysmorphoses majeures, les orthodontistes sont régulièrement confrontés à d'autres dilemmes : une perte de résultat en fin de croissance, un adulte demandeur d'une reprise après un traitement en compensation ou encore un enfant non-coopérant en phase interceptive. Une phase de réévaluation exhaustive devient alors nécessaire. Matériel et méthode: Sous la forme d'un éditorial, cet article expose différentes situations cliniques auxquelles les auteurs ont été confrontés lors de leur pratique. Discussion: Le propos n'est pas de pointer les imperfections de notre humanité mais seulement d'ouvrir les yeux sur des éléments diagnostiques qui échappent, que ce soit en phase initiale ou en réévaluation. Conclusion: Offrir une thérapeutique identique conduisant aux mêmes écueils n'est pas acceptable : il est temps de changer de paradigme.

Comparison of Soft Tissue Chin Thickness in Adult Patients With Various Mandibular Divergence Patterns.

Objective This study aimed to compare the soft tissue chin (STC) thickness at different levels in patients presenting for orthodontic treatment with different vertical facial types. Materials and methods This comparative cross-sectional study was conducted at Sharif Medical & Dental College, Lahore, Pakistan, on 195 subjects. Patients presenting for orthodontic treatment, both genders, aged from 18 to 32 years, and Pakistani nationals were included. Patients with any craniofacial deformity, syndrome, cleft lip and palate, previous orthodontic or orthognathic treatment, and multiple missing teeth and prostheses in edentulous areas were excluded. Vertical facial patterns and STC thickness were recorded from pre-treatment lateral cephalograms. One-way analysis of variance (ANOVA) was applied to compare STC among various vertical facial patterns. Post-hoc analysis was done using the Tukey test. Results There were 126 females (64.62%) and 69 males (35.38%). The mean age was 21.66 ± 3.44 years. All three soft tissue chin thickness distances significantly differed among vertical facial patterns (p<0.001). Multiple comparisons show that the distance between soft and hard tissue pogonion was insignificant between low and normal angle facial heights (p=0.5). Similarly, no significant difference was observed for the distance between soft and hard tissue menton in low and normal angle subjects (p=0.4). The rest of the multiple comparisons were statistically significant (p<0.05). Conclusion The STC thickness is significantly associated with vertical facial divergence. While planning orthognathic surgery or genioplasty of the mandible, due consideration should be given to vertical divergence of the face to avoid unwanted facial changes.

Horizontal Gaze Assessment: An Extensive Narrative Review.

OBJECTIVE: Bipedalism was a significant milestone in the evolutionary development of Homo sapiens sapiens, influencing neocortical evolution and subsequent behavioral changes. Coordinated visual and sensory inputs are crucial for posture, environmental interaction, and surgical planning, with horizontal gaze being a pivotal parameter. This narrative review aims to explore various geometric measures used to assess horizontal gaze in patients, highlighting their applications in surgical planning. METHODS: A literature review was conducted in indexed databases using Mesh terms like "Cervical Vertebrae" and "Visual Fields," along with keywords such as "horizontal gaze" and "sagittal spine parameters." Among 477 initially identified articles, 41 were selected for inclusion after rigorous filtering. RESULTS: The most recognized method for assessing horizontal gaze is the Chin Brow Vertical Angle (CBVA), initially described in patients with ankylosing spondylitis. Clinical photography is employed as a tool for CBVA calculation, while other measures like McGregor slope and Slope of the Line of Sight (SLS) have been considered as alternatives to CBVA. Each method presents its unique advantages and limitations. CONCLUSION: This review highlights the need for further research into horizontal gaze measurement methods. Developing novel approaches to determine horizontal gaze can significantly enhance surgical planning and, consequently, improve patient outcomes. The ongoing exploration of these geometric measures offers promising prospects for advancing the field and optimizing patient care.

Clinical and radiologic outcomes of posterior column extension, pedicle subtraction, and vertebral column resection osteotomies in adult chin on chest deformity: A systematic review.

Background: Chin-on-chest deformity is a rare and severely disabling condition characterized by kyphotic deformity in the cervicothoracic spine. To treat this deformity, various osteotomy techniques were described. Methods: A comprehensive literature search of biomedical databases including MEDLINE (via PubMed), Scopus (via Elsevier), Embase (via Elsevier), and Cochrane Library in English from 1/1/1990 to 3/31/2022 was conducted using a combination of text and Medical Subject Headings (MeSH). Results: The final analysis included 16 studies. All the studies were assigned a level of evidence of four. Except for two articles, all of the articles were non-comparative studies. A total of 288 patients were included in this review. Of the 288 patients, 107 underwent posterior column extension osteotomy (PCEO), 108 underwent pedicle subtraction osteotomy (PSO), and 33 underwent vertebral column resection osteotomy (VCRO). The most common osteotomy level in fifteen of the studies was C7/T1. The studies included in this review described several techniques for cervical sagittal balance correction. The range of preoperative and postoperative visual analogue scale (VAS) scores was 5.5-8.6 to 1.7-4.91, respectively. The range of preoperative and postoperative neck disability index (NDI) was 34.2-65.4 to 22.1-51.3, respectively. The most common complications were upper extremity paresthesia and hand numbness through the C8 dermatome distribution. Conclusions: Corrective osteotomies provide satisfactory results in patients with chin-on-chest deformity; however, the quality of the included studies limits the evidence.

Numb Chin Syndrome as the Initial Presentation of Mandibular Metastasis of Colorectal Cancer: A Case Report.

Numb chin syndrome (NCS) is hypesthesia of the mandible and lower lip caused by damage to the inferior alveolar or mandibular nerves, commonly due to dental treatment or osteomyelitis, but occasionally caused by malignant tumors. We report the case of a male in his 60s. He came to our hospital with a chief complaint of mandibular pain and paresthesia in the right side of the mental region. He had noticed swelling of the left mandible one month before the initial visit and strong hypesthesia of the right side of the mental region one week before the initial visit. Panoramic radiographs showed slight osteosclerosis of the left side mandible at the initial visit. Blood tests showed only a slight inflammatory reaction. The diagnosis of mandibular osteomyelitis and numb chin syndrome was made, and a contrast-enhanced CT scan was performed to investigate the possibility of neoplastic lesions, but no obvious cause was found. Osteosclerosis was minimal. A tissue biopsy was recommended, but the patient did not consent. Considering the possibility of NCS due to a hematologic disorder, the patient was referred to a hematologist, but no cause could be identified at the initial visit. With time, the markedly severe pain worsened, and the possibility of a neoplastic lesion was again suspected. Blood tests were performed, which revealed abnormally high levels of CA19 and CEA. He consulted a gastroenterologist, who found a tumor in the ileocecal region on contrast-enhanced CT, and multiple systemic metastases were found on a PET-CT scan the next day. Systemic chemotherapy was administered for multiple metastatic unresectable colorectal cancer (cT4N1aMc2 stage IVc).

Three-dimensional comprehensive evaluation of unilateral alveolar cleft bone grafting with iliac bone and chin bone blocks.

In this study, we aimed to provide guidance for selecting bone grafting materials in cases of alveolar clefts. Twenty-nine patients with unilateral complete alveolar clefts were categorized into three groups based on the bone grafting material used: Group A (iliac bone block grafts), Group B (iliac cancellous bone grafts), and Group C (chin bone block grafts). Cone-beam computed tomography (CBCT) data were analyzed using Mimics 19.0 software. Results showed that Group A had the highest bone formation rate, with significant differences observed between Groups A and B, as well as between Groups B and C. Group A and Group C had the highest proportion of Type I in volume assessment, while Group B had the highest proportion of Type III, Significant differences were observed in the distribution of volume assessment scores among the three groups. Bone height measurement results indicated that buccal-side measurement points had a higher proportion of Type I bone height than palatal-side measurement points. Bone width measurement results showed that Type I bone width was highest in Group C, while Type IV bone width was highest in Group B. Significant differences were observed in the distribution of implanted bone width among the three groups. Total grafting scores indicated that Types A and D were predominant in Groups A and C, while Group B had the highest proportion of Type D. Significant differences were observed in the distribution of total grafting scores among the three groups. The comprehensive evaluation method provides accurate assessment of alveolar cleft bone grafting outcomes and is applicable in clinical settings. Based on the results, we consider both iliac bone blocks and chin bone blocks as suitable materials for alveolar cleft bone grafting. Grafting material selection should consider preoperative gap volume measured using CBCT, required bone quantity, donor site complications, and overall clinical needs.

Basic concepts in facial and neck thread lifting procedures.

In this review article, our objective is to elucidate fundamental principles and offer practical illustrations concerning the procedures involved in facial and neck thread lifting. Moreover, we aim to explore associated concepts such as the fixing point, hanging point, and anchoring point terminologies, along with the elucidation of vectors. Additionally, we will provide anatomically oriented explanations of the lifting process required for each facial region using thread lifting methods like V, U, and I techniques using floating type threads (Secrete line, Hyundai Meditech., Inc., Wonjusi, Republic of Korea). Furthermore, our intention is to delve deeply into the concepts of tensile strength, anchoring strength, and holding strength, contextualizing their practical applications within this specific field.

A New Distal Pharyngeal Airway Device Associated with a Reduced Need for Chin-Lift and Jaw-Thrust Maneuvers in Sedated Patients.

Oropharyngeal airways (OPA) or nasopharyngeal airways (NPA) sometimes require chin-lift or jaw-thrust (CLJT) maneuvers to relieve airway obstruction which creates the burden of continuous hands-on care by the anesthesia provider. A new distal pharyngeal airway device (DPA) was used on 63 successive ambulatory surgery patients to assess the frequency of patients requiring manual CLJT maneuvers to prevent airway obstruction. Results were then compared with a contemporaneous group of patients who had used OPA or NPA devices for similar procedures. Patients using the DPA had a 38.5% lower rate of CLJT maneuvers compared with the combined OPA/NPA groups (22.2% of 63 vs. 60.7% of 163, P ≤ .001). Moreover, the results for the DPA group were close to those of the natural airway group (22.2% of 62 vs. 24.8% of 233, P = .66) Results were similar for a sub-set of the above groups who required deep sedation or deep extubation. CLJT maneuvers were common in this ambulatory surgery setting. The new DPA device was associated with a reduced need for such manual maneuvers when compared with similar patients who received OPA or NPA devices and is comparable with the rate for natural airways.

Custom-Made Implant Fabrication for Chin Augmentation Using Piled-Up Expanded Polytetrafluoroethylene Sheets: An Innovative Surgical Technique and Literature Review.

BACKGROUND: Alloplastic chin augmentation is the most common esthetic surgical treatment to reshape the chin. However, factory-made chin implants are typically standardized rather than custom-made and have potential to cause complications. Although the fabrication of custom-made implants by using computer-assisted planning and 3D-printing technology has become widespread, the process has several disadvantages, including long preoperative prosthesis preparation times, high costs, and unsuitability for patients with asymmetric chins or those who undergo combined mandibuloplasty before implant placement. The present study developed an innovative chin augmentation technique involving stacked expanded polytetrafluoroethylene (e-PTFE) sheets that is suitable for most patients and has minimal side effects. MATERIALS AND METHODS: A retrospective review of a single surgeon's experience was performed over a 2 year period for patients who underwent a procedure involving piled-up e-PTFE sheets for alloplastic chin augmentation. This study analyzed the outcomes, complications (temporary nerve numbness, wound infection, hematoma formation, and implant displacement), and patient satisfaction during follow-up. RESULTS: Between January 2018 and December 2020, 38 patients underwent the procedure involving piled-up e-PTFE sheets for alloplastic chin augmentation. Six patients (15.8%) experienced nerve-related temporary numbness, and one (2.6%) experienced wound infection. None had developed major complications such as implant displacement or wound infection at follow-up. Moreover, the patients demonstrated a high level of satisfaction with the surgical results. CONCLUSION: Piled-up e-PTFE sheets can be used to produce custom-fit porous polyethylene chin implants that result in minimal complications and a very high satisfaction rate. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Chin reinforcement using the hyaluronic acid injectable filler VYC-20L and VYC-25L.

BACKGROUND: The chin is an essential element of the facial unit and influences how people perceive facial aesthetic appeal. Hyaluronic acid (HA) gel injections are tried-and-true therapies for regenerative therapies with a record of success in efficacy and safety. AIMS: To determine the best type of concentration of HA and way of injection for deep and superficial planes of chin. MATERIALS AND METHODS: VYC-20L and VYC-25L (Juvederm Voluma XC® Juvéderm Volux®; Allergan plc) are 20- and 25-mg/mL HA gels with lidocaine, respectively, were injected with cannulas and needles on the bone, respectively. RESULTS: Chin reinforced respecting the measures with good contouring. No serious complications. Patient was satisfied with results. DISCUSSION: We advise using VYC 20L superficially above the muscle or with a cannula for injection, and we recommend using VYC 25L in the supraperiosteal plane.

Metastatic gallbladder cancer presenting as numb chin syndrome: A case report and literature review.

Gallbladder cancer (GBC) is an uncommon malignancy that is highly aggressive in the advanced stages. However, it rarely metastasizes to the mandible. Numb chin syndrome (NCS) is a rare neurological manifestation associated with various underlying causes, including occult primary cancers and distant metastases. It is often considered to be a significant indicator of malignancy, and thorough investigation is essential in the presence of unclear etiology. The current study reported on the case of a 69-year-old Japanese woman who presented with numbness and mild pain in the lower lip and chin area for three months. No other systemic symptoms were observed. Immunocytochemical examination revealed the presence of an adenocarcinoma and TNM staging as per the Union for International Cancer Control and the American Joint Committee on Cancer guidelines confirmed stage IVb GBC. Comprehensive full-body positron emission tomography-computed tomography examination using 18F-fluoro-2-deoxy-D-glucose revealed additional bone and soft-tissue metastases. Palliative chemotherapy and radiation treatment were initiated based on the advanced stage of disease at the time of diagnosis. However, the patient succumbed to multiple organ failure six months later. The simultaneous occurrence of GBC, mandibular metastasis and NCS is rare and associated with poor prognosis. Despite the widespread nature of the disease, it can often manifest as non-specific oral symptoms without any systemic indications. The current study emphasizes the critical importance of timely confirmatory testing for accurate diagnosis and initiation of appropriate management for such complex conditions.

Quantitative and qualitative condylar changes following stabilization splint therapy in patients with temporomandibular joint disorders with and without skeletal lateral mandibular asymmetry: a cone beam computed tomographic study.

BACKGROUND: Temporomandibular disorders (TMDs) encompass pain and dysfunction in the jaw, muscles, and adjacent structures. This study aimed to explore the quantitative (condylar position, morphology) and qualitative (bone mineral density (BMD)) therapeutic outcomes following a stabilization splint (S.S.) therapy in adult patients diagnosed with TMD (Arthralgia) with/without lateral mandibular asymmetry (MA) using cone beam computed tomography (CBCT). METHODS: In this retrospective clinical study, 60 adult TMD patients who received S.S. therapy were enrolled and allocated into the TMD group (TMDG) and TMD with MA group (TMD + MAG). The diagnosis was made according to the Diagnostic Criteria for TMD (DC/TMD) AXIS I. MA was measured from the mid-sagittal plane to the Menton point. CBCT was used to scan the temporomandibular joints pre- (T0) and post- (T1)-treatment for three-dimensional analysis. Intra- and intergroup statistical comparisons were performed using the Wilcoxon signed ranks and the Kruskal‒Wallis test. RESULTS: For quantitative comparisons, there was a statistically significant difference between T0 and T1 in the joint spaces of TMD + MAG (anterior, superior, posterior, and coronal lateral on the deviated side as well as in the superior, coronal medial joint space of the contralateral side). Morphologically, the deviated side had a narrower condylar width, reduced condylar height, and a steeper eminence angle. In contrast, the contralateral side tended to have a greater condylar length. For qualitative measurements, BMD also showed statistical significance between T0 and T1 in the majority of the condyle slopes (AS, SS, PS, and LS on the deviated side and in AS and MS on the contralateral side) of TMD + MAG. Additionally, only the AS and PS showed significance in TMDG. CONCLUSION: Multiple joint space widening (AJS and CMS) and narrowing (SJS, PJS, and CLS) could characterize the deviated side in TMD + MA. Factors like narrower condylar width, reduced condylar height, and steeper eminence angle on the deviated side can worsen TMD + MA. Proper alignment of the condyle-disc position is essential for optimal function and load distribution, potentially affecting bone mineral density (BMD). MA plays a prominent role in disturbing bone densities. S.S. therapy shows more evident outcomes in TMD + MAG (on the deviated side compared to the contralateral side) than the TMDG.

What is a trait? Lessons from the human chin.

The chin, a distinguishing feature of Homo sapiens, has sparked ongoing debates regarding its evolutionary origins and adaptive significance. We contend that these controversies stem from a fundamental disagreement about what constitutes a well-defined biological trait, a problem that has received insufficient attention despite its recognized importance in biology. In this paper, we leverage paleoanthropological research on the human chin to investigate the general issue of character or trait identification. First, we examine four accounts of the human chin from the existing literature: the mandibular differential growth byproduct, the bony prominence, the inverted T-relief, and the symphyseal angle. We then generalize from these accounts and propose a three-stage framework for the process of character identification: description, detection, and justification. We use this framework to reinterpret the four accounts, elucidating key points of contention surrounding the chin as well as other morphological characters. We show that debates over the chin carry broad and important biological implications that extend beyond this trait and that are not mere semantic issues of definition.

F-Chin/Feminizing the Chin: A Genioplasty Technique with Virtual Planning for Male-to-Female Transgender Patients.

The chin is an essential structure in facial harmony and an important gender marker. Advancing a receding chin is fundamental to improve the facial appearance, particularly in male-to-female transgender patients. However, in patients with microgenia and/or retrognathia, desiring a more feminine appearance, a chin advancement can result in a wider, square shape; an undesirable effect. Genioplasty is a versatile procedure used in facial feminization surgery that allows modifying the natural anatomy of the chin in all three spatial dimensions. The technique herein described proposes a simple genioplasty procedure for feminizing the chin (F-chin genioplasty) in transgender patients where anteroposterior advance is required. Virtual planning was used to establish the landmarks for an anteroposterior advancement with transverse reduction in the chin. A perpendicular line to the Frankfurt plane passing through the incisal edge of the upper central incisor was used to plan the anteroposterior movement, and two vertical lines on the outer wall of the nasal cavity  for the chin transverse measurement. The authors present three case reports with the F-chin genioplasty transgender technique with satisfactory results, ensuring a more feminine facial appearance.Level of Evidence V This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Evaluating the Use of IncobotulinumtoxinA in Combination with Calcium Hydroxylapatite with Integral Lidocaine for Improving Chin Profile Projection Aesthetics.

Background: Microgenia resulting from congenital deficiency or aging can significantly affect the facial profile and render it less attractive. This study assessed the effectiveness of treatment with incobotulinumtoxinA (Inco) and calcium hydroxylapatite with integral lidocaine (CaHA[+]) for improving chin profile. Methods: Subjects with a hyperactive mentalis and at least moderate chin retrusion according to the Asian Chin Projection Scale (ACPS) were recruited. At Visit 1, subjects received Inco injection into the mentalis, followed by deep, pre-periosteal injections of CaHA(+) into the pogonion. The primary endpoint was an ACPS improvement of one point at one and six months. Photographs at baseline and each follow-up visit were rated by physicians using the Global Aesthetic Improvement Scale (GAIS). All subjects completed a satisfaction questionnaire. Results: Ten female subjects were recruited. Mean age was 42.5 years and all had moderate-to-severe chin retrusion at baseline (ACPS score ≥2). All subjects demonstrated at least a one-point improvement in ACPS compared with baseline at both the one-month and six-month posttreatment visits. Physician GAIS ratings of subject appearance confirmed that 100 percent of subjects experienced improved chin projection at each follow-up visit compared to baseline. All 10 subjects were pleased with their chin profile after treatment, with 90 percent noting that it was still "very much improved" at six months. Conclusion: Based on our results, combined treatment with CaHA and Inco appears to be effective and well tolerated for improving the facial profile of subjects with chin retrusion. Treatment was associated with a high degree of patient satisfaction and was well tolerated.

Chin Augmentation and Treatment of Chin Retrusion with a Flexible Hyaluronic Acid Filler in Asian Subjects: A Randomized, Controlled, Evaluator-Blinded Study.

BACKGROUND: Aesthetic improvement of the chin is increasingly requested by patients, including those of Chinese origin. METHODS: A randomized, evaluator-blinded, no-treatment controlled study evaluated the effectiveness and safety of a flexible hyaluronic acid (HA) filler, Restylane® DefyneTM (HADEF), in the correction of chin retrusion in a Chinese adult population over 12 months after treatment. On Day 1, subjects were randomized 3:1 into two groups, HADEF or delayed-treatment controls, and those in the HADEF group were administered treatment. An optional touch-up treatment was administered 1 month after treatment to obtain optimal chin augmentation. The initially untreated control group was offered delayed-treatment after 6 months (including 1-month touch-up). RESULTS: HADEF was superior to no-treatment in improving chin retrusion according to the blinded evaluator at 6 months [Galderma Chin Retrusion Scale (GCRS) responder rate (≥ 1-point improvement from baseline) of 81% vs. 5% for untreated controls; p < 0.001, meeting the primary effectiveness objective. A majority of subjects maintained improvement at 12 months (61% in the HADEF group). All subjects reported satisfaction with results at 6 months after treatment with HADEF and aesthetic improvement rates per the global aesthetic improvement scale (GAIS) were high for 12 months following treatment, with an acceptable safety profile. CONCLUSIONS: These results demonstrated HADEF to be effective and safe for the correction of mild-to-moderate chin retrusion in Chinese subjects, confirming findings previously observed in a western population. LEVEL OF EVIDENCE I: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

[Preliminary evaluation of chin symmetry with three dimentional soft tissue spatial angle wireframe template].

OBJECTIVE: To develop an efficient and robust method based on three dimensional facial landmarks for evaluating chin region asymmetry at the soft tissue level and to compare it with the traditional mirror-overlap analysis method in order to test its availability. METHODS: Standard symmetrical face was used for mental tubercle coordinate transformation so as to filter soft tissue three dimensional spatial angle and construct corresponding three dimensional spatial angle wireframe template. Ten patients aged 12-32 years with clinical chin region asymmetry diagnosis at the Department of Orthodontics of Peking University Hospital of Stomatology from November 2020 to November 2021 were randomly selected. Three dimensional soft tissue face scan data of the patients were collected by three dimensional face scanner and the landmark points were automatically determined by the Meshmonk non-rigid registration algorithm program, and in this way, the asymmetric three dimensional spatial angle wireframe template and corresponding spatial angle parameters were generated. Mirror-overlap analysis of face scan data was also performed in Geomagic Studio 2015 software and deviation color maps were generated. This study took mirror-overlap analysis as the gold standard method, the response rate of chin region asymmetry was eva-luated by the outcomes of the mirror-overlap analysis and three dimensional spatial angle wireframe template analysis. RESULTS: Nine three dimensional spatial angle indicators were selected through coordinate transformation, and the response rate was calculated using mirror-overlap analysis as the gold standard method. Among these ten selected patients, the response rate of the total chin region asymmetry was 90% (9/10). Using the deviation value of mirror-overlap analysis as a reference, the response rate of chin region asymmetry in the X dimension was 86%, the response rate of chin region asymmetry in the Y dimension was 89%, and the response rate of chin region asymmetry in the Z dimension was 100%. CONCLUSION: The three dimensional soft tissue spatial angle wireframe template proposed in this study has some feasibility in evaluating chin region asymmetry at the soft tissue level, and its ability to recognize asymmetry separately in the three dimensional direction is better than the mirror-overlap analysis method, and the indicators recognition rate still needs to be further improved.

Osseous genioplasty versus chin implants: early complications and patient satisfaction.

Osseous genioplasty and chin augmentation with implants are the two main treatment options for retrognathia. This retrospective cohort study was performed to compare the prevalence of complications and patient satisfaction following osseous genioplasty and chin augmentation by implant. Eighty patients were included: 38 underwent advancement osseous genioplasty and 42 received chin implants (alloplastic, either Medpor or Silastic) intraorally or extraorally. The patients were assessed for complications 12 months after surgery, including neurosensory disturbances, infection or extrusion, wound dehiscence, and the need for reoperation. Patient satisfaction was evaluated using a visual analogue scale. The infection rate was significantly higher in the chin implant group than in the genioplasty group (P = 0.028). Moreover, dehiscence and the need for reoperation appeared to be more common following chin augmentation with implants. However, there was no significant difference in the prevalence of neurosensory disturbances between the two groups (P = 0.137). In the chin implants group, the extraoral approach resulted in a lower dehiscence rate than the intraoral approach. Patients in the genioplasty group had significantly higher satisfaction scores than those in the chin implant group (P = 0.001). Overall, the rates of the complications assessed were lower and patient satisfaction was higher after osseous genioplasty when compared to chin augmentation with implants.

Treating the double chin with hyaluronic acid injection.

INTRODUCTION: Submental fullness (SMF), or the double chin, is a condition regarded as undesirable. Many treatment modalities are available for SMF reduction, such as energy-based devices, injection lipolysis, or surgery. However, of minimal invasive modalities, hyaluronic acid (HA) injection has not been explored for possible SMF treatment. CASE REPORT: A 52-year-old East Asian female patient with prominent SMF underwent HA filler injection. Aside from marked reduction of SMF prominence, an improvement of sagging over her cheeks and jawline, and a general improvement to facial aging signs was noted. CONCLUSION: HA filler injections for SMF offer an instant, zero downtime, and safe alternative, and can be considered in patients who wish to simultaneously achieve improvement in other facial areas.

The challenging management of Moebius syndrome using orthodontic camouflage: A case report.

Moebius syndrome (MS) is a rare congenital neuromuscular disorder characterized by weakness or paralysis (palsy) of abducens and facial nerves, or other cranial nerves which may be affected. Diagnosis, treatment, and dental management of MS patients are focused on treating manifestations like malocclusion, while catering to associated extraoral (neurologic, dermatologic, ocular) complications, aiming to improve their quality of life. Here, we report the case of a 9-year-old female patient with MS who underwent orthodontic camouflage using combined orthopedic-orthodontic therapy using a high-pull chin cup and fixed orthodontic appliance to improve skeletal mal-relation and facial appearance. The outcome displayed great improvement in function and better esthetics, improving not only the patient's but also the family's quality of life. A year's follow-up showed successful maintenance of the achieved results. A multidisciplinary approach in MS not only helps in overcoming the treatment challenges but also provides great psychosocial benefits to these patients.