Strategic Intervention: Ectopic Premolar Management for Preventing Molar-Premolar Transposition in Class III Malocclusion.

Class III malocclusion often leads to the ectopic eruption of premolars in the upper arch, posing unique challenges for orthodontic practitioners. This case report explores the clinical implications of ectopic maxillary premolars in a Class III malocclusion patient, emphasizing the importance of early intervention and comprehensive treatment strategies. Factors contributing to ectopic eruption, including genetic predisposition and anatomical variations, are discussed, guiding orthodontists in effective diagnosis and management. A 14-year-old patient with Class III malocclusion, anterior crossbite, and ectopic maxillary premolars sought orthodontic consultation. The treatment plan involved extracting the deciduous second molar, realigning the ectopic premolar, and addressing arch length discrepancies. Utilizing fixed orthodontic appliances and strategic force application, the patient achieved Class I molar and canine relationships, resolving the ectopic premolar alignment within 10 months. Ectopic eruption of maxillary premolars, especially in Class III malocclusion, is a critical concern for oral health. Genetic predisposition, arch crowding, and developmental disturbances contribute to this condition. Early intervention, as demonstrated in this case, plays a pivotal role in restoring dentoskeletal harmony. The study underscores the need for a multidisciplinary approach, combining orthodontic, surgical, and restorative interventions for optimal outcomes. Thus, this case report highlights the successful management of ectopic maxillary premolars in a Class III malocclusion patient through strategic orthodontic intervention. Understanding the etiological factors and employing a comprehensive treatment approach facilitate timely diagnosis and prevent complications. Orthodontists must navigate the complexities of ectopic eruption, considering occlusal effects and collaborating with other specialists for holistic patient care.

Site and severity of facial asymmetry after bimaxillary surgery for class III deformity: a case-control study.

OBJECTIVES: The study aimed (1) to evaluate the site and severity of facial asymmetry in Class III patients before and after bimaxillary surgery, and (2) to identify the influence of initial severity and positional jaw asymmetry on residual facial asymmetry. MATERIALS AND METHODS: Preoperative and postoperative cone-beam computed tomography of 65 patients with Class III facial asymmetry who underwent bimaxillary surgery were evaluated. Five midline and 14 paramedian facial soft tissue landmarks were identified to assess facial asymmetry. The outcomes were compared to a control group consisting of 30 age- and gender-matched Class I subjects. The postoperative positional jaw asymmetry (i.e., shift, roll, yaw) of each osteotomy segment (maxilla, mandible, chin, ramus) was also measured. RESULTS: Before surgery, the asymmetry was more severe at the chin, middle and lower contour. Bimaxillary surgery effectively corrected facial asymmetry, particularly in achieving normalization of chin deviation. However, significant asymmetry persisted postoperatively in the middle and lower contour (p < 0.001 and p < 0.01, respectively), which was affected by the positional ramus asymmetry in the roll and shift. CONCLUSIONS: Deviation of the chin, middle and lower contour contributed significantly to overall facial asymmetry in Class III asymmetry. Despite normalization of the chin deviation after bimaxillary surgery, asymmetry persisted at the middle and lower contour, primarily as the result of insufficient correction of the positional ramus asymmetry. CLINICAL RELEVANCE: Understanding the residual asymmetry after bimaxillary surgery is important for minimizing deviation and optimizing the surgical planning for its correction.

Effects of eruption guidance appliance in the early treatment of Class III malocclusion.

OBJECTIVES: To evaluate the dentoskeletal effects and effectiveness of the eruption guidance appliance in Class III patients in the mixed dentition. MATERIALS AND METHODS: The experimental group comprised 22 patients with Class III malocclusion and anterior cross-bite (12 males, 10 females, mean age 7.63 ± 0.96 years) treated with the eruption guidance appliance over a mean period of 1.72 ± 0.48 years. The control group comprised 22 untreated subjects (12 males, 10 females, mean age 7.21 ± 0.60 years) with Class III malocclusion. Lateral cephalometric radiographs were obtained at pretreatment (T1) and posttreatment (T2). Intergroup comparisons were performed with Mann-Whitney and t-tests (P < .05). RESULTS: In the experimental and control groups, the anteroposterior relationship between the maxilla and mandible (ANB angle) remained stable during the treatment period (T1 to T2). The mandibular plane angle decreased in the experimental group and increased in the control group. In the experimental group, the lower anterior face height increase and maxillary molar vertical development were significantly smaller compared to controls. Positive overjet was achieved in 54% of the experimental group. CONCLUSIONS: The eruption guidance appliance produced no change in the skeletal anteroposterior relationship. The anterior cross-bite/edge-to-edge relationship was corrected in only about half of the treated subjects.

Tongue pressure and maxillofacial muscle activities during swallowing in patients with mandibular prognathism.

BACKGROUND: Coordination among lip, cheek and tongue movements during swallowing in patients with mandibular prognathism remains unclear. OBJECTIVES: This study aimed to identify the temporal sequences of tongue pressure and maxillofacial muscle activities during swallowing in patients with mandibular prognathism and compared characteristics with those of healthy volunteers. METHODS: Seven patients with mandibular prognathism (mandibular prognathism group) and 25 healthy volunteers with individual normal occlusion (control group) were recruited. Tongue pressures and masseter, orbicularis oris, mentalis and supra- and infrahyoid muscle activities while swallowing gel were measured simultaneously using a sensor sheet system with five measurement points and surface electromyography, respectively. Onset time, offset time and durations of tongue pressure and muscle activities were analysed. RESULTS: In the mandibular prognathism group, tongue pressure was often produced first in more peripheral parts of the palate. Offset of tongue pressure in the posteromedian and peripheral parts of the palate and maxillofacial muscle activities except for orbicularis oris were delayed. Duration of tongue pressure in the anteromedian part of the palate was significantly shorter and durations of masseter, mentalis and suprahyoid muscle activities were significantly longer. Times to onset of orbicularis oris and suprahyoid muscle activities based on first onset of tongue pressure were significantly shorter. CONCLUSION: These results suggest that patients with mandibular prognathism may exhibit specific patterns of tongue pressure production and maxillofacial muscle activities during swallowing.

Contributions of Digital Simulation to Orthodontic Therapeutic Decision-Making: A Case Report.

Adult orthodontics aims to achieve optimal functional and aesthetic corrections. However, for several reasons, some patients will wish to benefit from a limited treatment where only certain aspects of a malocclusion will be corrected. In these clinical situations, the therapeutic objectives must be adjusted to the individual needs of the patient insofar as they can bring them real benefits. The use of digital technology makes it possible to study the therapeutic possibilities better and visualize the occlusal results before choosing the best therapeutic approach, especially in cases requiring customization. The aim of this clinical case report is to illustrate the orthodontic compromise made after the analysis of the digital setup in an adult patient who presented with a class III malocclusion but refused orthodontic-surgical therapy and requested an alternative treatment.

Evaluation of Glenoid Fossa Position in Class II Malocclusion Associated with Mandibular Retrusion and Class III Malocclusion Associated with Mandibular Protrusion.

Objective: This study examined the glenoid fossa in Class II and Class III malocclusions with mandibular retrusion and protrusion. Materials and Methods: A retrospective investigation examined 60 Class II and 60 Class III cephalometric radiographs. Cephalometric landmarks and glenoid fossa measurements were taken. Statistical analysis contrasted the two malocclusion groups' glenoid fossas. Results: Class II malocclusion had a much lower mean Sella-Nasion-Condylion (SNCd) angle (glenoid fossa sagittal position) than Class III (14.6° ± 1.9). Class II malocclusion had a lower mean Sella-Nasion-Gonion (SNGo) angle (32.5° ± 4.3) than Class III (36.2° ± 3.9). The SNCd angle and SNGo angle in both groups demonstrated a negative correlation, demonstrating a relationship between the glenoid fossa and the mandibular sagittal axis. Conclusion: The glenoid fossa location differs significantly between Class II malocclusion with mandibular retrusion and Class III with protrusion. Class II malocclusion has a posterior glenoid fossa, while Class III has a less posterior one. Understanding these links may help patients receive more personalized treatment.

Comparison between one-jaw and two-jaw designs in virtual surgery planning for patients with class III malocclusion.

Orthognathic surgery is highly effective for treating maxillomandibular discrepancies in patients with class III malocclusion. However, whether one- or two-jaw surgery should be selected remains controversial. Our study aimed to evaluate quantitative differences between one-jaw and two-jaw surgical designs. In total, 100 consecutive patients with skeletal class III malocclusion who underwent orthognathic surgery with preoperative three-dimensional simulation between August 2016 and November 2021 were recruited. Based on the same final occlusal setup, a two-jaw surgery design and two types of one-jaw design were created. In total, 400 image sets, including preoperative images and three types of surgical simulation, were measured and compared. The one-jaw mandibular setback design led to improvement in most cephalometric measurements and facial symmetry. Although the one-jaw maxillary advancement design improved the ANB angle and facial convexity, it induced maxillary protrusion and reduced facial symmetry. Compared with the other designs, the two-jaw design provided significantly closer cephalometric measurements to the normative values, better symmetry, and less occlusal cant. Overall, the two-jaw design provided a quantitatively better facial appearance in terms of symmetry, proportion, and profile. Although an optimal surgical design necessitates thorough preoperative evaluation and a shared decision-making process, two-jaw surgery can be considered for improving overall facial esthetics and harmony.

Treatment of maxillary hypoplasia with bone anchored maxillary protraction (BAMP) - A case report.

Early diagnosis and treatment is known to be beneficial in Class III malocclusions secondary to maxillary hypoplasia. However, success of treatment largely depends on the patient's compliance and thus, appropriate choice of treatment, appliance and the age for interception plays an important role. Bone anchored maxillary protraction is one such approach presented in this case report for a 13 years old boy who reported with the chief complaint of lower front teeth visibility during speech and smiling. On examination his molars were in Angle's Class III relation, anterior crossbite and deep bite with unerupted maxillary canines. Orthodontic treatment was begun for deep bite correction and for creating space for the maxillary canines, followed by surgical intervention for placement of bone anchored miniplates. Protraction was done for 14 months and the total treatment time was 20 months. Improvement in the patient's profile, aesthetics and function was achieved with well aligned arches.

Radiographic Imaging for the Diagnosis and Treatment of Patients with Skeletal Class III Malocclusion.

Skeletal Class III malocclusion is one type of dentofacial deformity that significantly affects patients' facial aesthetics and oral health. The orthodontic treatment of skeletal Class III malocclusion presents challenges due to uncertainties surrounding mandibular growth patterns and treatment outcomes. In recent years, disease-specific radiographic features have garnered interest from researchers in various fields including orthodontics, for their exceptional performance in enhancing diagnostic precision and treatment effect predictability. The aim of this narrative review is to provide an overview of the valuable radiographic features in the diagnosis and management of skeletal Class III malocclusion. Based on the existing literature, a series of analyses on lateral cephalograms have been concluded to identify the significant variables related to facial type classification, growth prediction, and decision-making for tooth extractions and orthognathic surgery in patients with skeletal Class III malocclusion. Furthermore, we summarize the parameters regarding the inter-maxillary relationship, as well as different anatomical structures including the maxilla, mandible, craniofacial base, and soft tissues from conventional and machine learning statistical models. Several distinct radiographic features for Class III malocclusion have also been preliminarily observed using cone beam computed tomography (CBCT) and magnetic resonance imaging (MRI).

Three-dimensional facial soft-tissue changes after surgical orthodontics in different vertical facial types of skeletal Class III malocclusion: A retrospective study.

The study compared the soft-tissue response to hard-tissue movement among different Class III vertical facial types after orthognathic surgery (OGS). The study included 90 consecutive adult patients with skeletal Class III malocclusion who underwent two-jaw OGS. Patients were divided into three groups (high, medium, and low angle) based on the presurgical Frankfort-mandibular plane angle. Cone-beam computerized tomographs were taken before surgery and after debonding. Soft- and hard-tissue linear and angular measurements were performed using three-dimensional reconstruction images. One-way analysis of variance was used for intergroup comparisons. Soft tissue tended to respond more to hard-tissue movement in the lower lip area in patients with low angle (mean = 0.089, SD = 0.047, p = 0.023), whereas no significant difference was observed for other sites. Consistently, L1/Li thickness increased most significantly in the high-angle group (mean = 1.98, SD = 2.14, p = 0.0001), and B/Si thickness decreased most significantly after surgery (mean = 2.16, SD = 2.68, p = 0.016). The findings suggest that the high-angle group had a higher chance of undergoing genioplasty to enhance chin contour. Different OGS plans should be considered for different Class III vertical facial types.

The Skeletal Stability of Combined Surgery First Approach and Clear Aligners in Skeletal Class III Malocclusion Correction: A Randomized Controlled Trial.

The surgery first approach (SFA) and clear aligners technique can address traditional treatment defects, such as prolonged waiting times for surgery and a less desirable facial appearance due to wire aligners. However, the curative effect of the combination remains uncertain. The randomized controlled study aimed to evaluate the skeletal stability of the SFA compared to the conventional orthodontic first approach (OFA), both of which were applied with clear aligners. A total of 74 participants were randomly allocated to two groups: the SFA group (experimental) and the OFA group (control). The skeletal deviation was calculated using reconstruction models from computed tomography scans taken immediately and 6 months after surgery. The largest median deviations were detected in the y-axis of the mandible for both two groups, separately 1.36 mm in the experimental group and 1.19 mm in the control group. Apart from the maxillary yaw dimension (p = 0.005), there were no significant differences between the two groups in terms of linear and angular deviation. The experimental group had an overall treatment time of 18.05 ± 2.53 months, while the control group took 22.83 ± 3.60 months (p < 0.05). Therefore, the combined surgery-first and clear aligners treatment can achieve comparable skeletal stability to the conventional approach, while also saving significant time.

Evaluation of the anterior dentoalveolar relationship in skeletal Class III malocclusion patients with different vertical facial patterns using cone-beam computed tomography.

OBJECTIVES: To measure and compare labiolingual inclinations of the teeth and alveolar bone and the anterior dentoalveolar inclination in patients with skeletal Class III malocclusions with different vertical facial patterns using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Based on the inclusion and exclusion criteria, 84 CBCT images of patients with untreated skeletal Class III malocclusion were selected. There were 28 patients each in the hypo-, normo-, and hyperdivergent groups. The labiolingual inclinations of the teeth, the corresponding alveolar bone, and the anterior dentoalveolar inclinations were measured and analyzed statistically. RESULTS: The inclinations of the mandibular canine and corresponding alveolar bone were smaller in the hypodivergent group than in the hyperdivergent group. The inclination of the alveolar bone and the maxillary dentoalveolar inclination were smaller in the hyperdivergent group than in the hypodivergent group. CONCLUSIONS: There were differences in the inclination of the teeth, corresponding alveolar bone, and dentoalveolar inclinations at different positions among skeletal Class III patients with different vertical facial patterns. The roots were generally located on the labial side of the alveolar bone.

Long-term evaluation of condylar positional and volumetric parameters and skeletal stability in Class III bimaxillary orthognathic surgery patients.

This retrospective study examined long-term (4-5 years) condylar positional and volumetric changes and skeletal stability after bimaxillary orthognathic surgery in skeletal Class III patients. Pre-surgical (T0: 0.9 ± 1.1 months) and post-surgical (T1: 0.6 ± 0.7 months; T2: 12.8 ± 3.1 months; T3: 56.5 ± 6.5 months) cone beam computed tomography (CBCT) images of 22 patients were obtained. CBCT multiplanar reformation (MPR) images were generated, and three-dimensional (3D) condylar models were constructed and superimposed to compare changes in condylar volume from pre- to postoperative. Condylar position in the sagittal and coronal planes altered immediately after surgery; however at long-term follow-up, the condyles had returned to their pre-surgical position. The condyles remained slightly inwardly rotated at short-term (-2.6°, 95% confidence interval -3.5° to -1.7°) and long-term (-1.9°, 95% confidence interval -2.8° to -1.0°) follow-up. Changes in condylar volume were insignificant after surgery. Condylar positional changes had no effect on skeletal stability. However, patients with an increased face height prior to surgery and more retrusive jaw position postoperatively were more prone to condylar resorption. Surgical changes remained stable 4-5 years after surgery. In conclusion, condylar position changed insignificantly following surgical correction in Class III patients provided that the correct surgical technique was employed.

Three-dimensional positioning of the maxilla using novel intermediate splints in maxilla-first orthognathic surgery for correction of skeletal class III deformity.

OBJECTIVES: Successful orthognathic surgery requires accurate transfer of the intraoperative surgical plan. This study aimed to (1) evaluate the surgical error of a novel intermediate splint in positioning the maxilla during maxilla-first orthognathic surgery and (2) determine factors influencing surgical error. MATERIALS AND METHODS: This prospective study examined 83 patients who consecutively underwent Le Fort I osteotomy for correction of skeletal class III deformity using a novel intermediate splint and a bilateral sagittal split osteotomy. Surgical error was the outcome variable, measured as the difference in postoperative translational and rotational maxillary position from the virtual plan. Measures included asymmetry, need and amount for mandibular opening during fabrication of intermediate splints, and planned and achieved skeletal movement. RESULTS: Mean errors in translation for vertical, sagittal, and transversal dimensions were 1.0 ± 0.7 mm, 1.0 ± 0.6 mm, and 0.7 ± 0.6 mm, respectively; degrees in rotation for yaw, roll, and pitch were 0.8 ± 0.6, 0.6 ± 0.4, and 1.6 ± 1.1, respectively. The transverse error was smaller than sagittal and vertical errors; error for pitch was larger than roll and yaw (both p < 0.001). Error for sagittal, transverse, and roll positioning was affected by the achieved skeletal movement (roll, p < 0.05; pitch and yaw, p < 0.001). Surgical error of pitch positioning was affected by planned and achieved skeletal movement (both p < 0.001). CONCLUSIONS: Using the novel intermediate splint when performing Le Fort I osteotomy allowed for accurate positioning of the maxilla. CLINICAL RELEVANCE: The novel intermediate splint for maxillary positioning can be reliably used in clinical routines.

Maxillofacial growth changes after maxillary protraction therapy in children with class III malocclusion: a dual control group retrospective study.

PURPOSE: To investigate the balance between post-treatment effect and continued nature growth after maxillary protraction treatment in patients with skeletal class III malocclusion. METHODS: 31 patients aged 8.79 ± 1.65 years with skeletal Class III malocclusion had been treated with maxillary protraction and the treatment lasted an average of 1.16 years. The average observation duration after treatment in the maxillary protraction group was 2.05 ± 0.39 years. In the control groups, a sample of 22 patients (9.64 ± 2.53 years) with untreated skeletal class III malocclusion and 24 patients (9.28 ± 0.96 years) with skeletal class I malocclusion were matched to the treatment group according to age, sex and observation period. The mean observation interval of the control groups was 2.39 ± 1.29 years in the class III group and 1.97 ± 0.49 years in the class I group. RESULTS: The active orthopedic treatment effect showed a opposite trend to the natural craniomaxillofacial growth effect after treatment in many aspects. In the observation duration of treatment group, decrease in ANB, Wits appraisal and BAr-AAr were statistically significant compared to class I control group (p < 0.001), and there was a significant increase in NA-FH (P < 0.001) which was contrary to class III control group. Treatment group presented a significant increase in Gn-Co (P < 0.01) and Co-Go (P < 0.001), except for changes in the extent of the mandibular base (Pog-Go, P = 0.149) compared to class I control group. The vertical maxillomandibular skeletal variables (Gonial; MP-SN; MP-FH; Y-axis) in treatment group decreased significantly compared to those in class III control group (P < 0.01). U1-SN and L1-MP showed a significant increase, which was similar to the class I group (P > 0.05), and overjet decreased significantly relative to both of the two control groups (P < 0.05). CONCLUSION: Maxillary protraction therapy led to stable outcomes in approximately 77.42% of children with Class III malocclusion approximately 2 years after treatment. Unfavorable skeletal changes were mainly due to the greater protrusion of the mandible but maxillary protraction did have a certain degree of postimpact on the mandibular base. Protraction therapy does not fundamentally change the mode of maxillary growth in Class III subjects except for the advancement of the maxilla. Craniomaxillofacial region tend to restabilize after treatment and lead to skeletal growth rotation and more dentoalveolar compensation.

A comparison of maxillary posterior changes following facemask therapy: Skeletal anchorage versus tooth-borne anchorage.

OBJECTIVE: To compare changes in the maxillary posterior structure as seen in cone-beam computed tomography (CBCT) images resulting from facemask therapy using skeletal (miniplate/FM) anchorage versus tooth-borne anchorage (RME/FM). MATERIALS AND METHODS: A retrospective study was conducted on 20 patients divided into the miniplate/FM group (nine patients aged 9.5 ± 1.4 years) and the RME/FM group (11 patients aged 9.2 ± 1.4 years). CBCT images before and after facemask therapy were evaluated to assess changes in the maxillary posterior structure. RESULTS: The miniplate/FM group had greater advancement of the maxilla and midface compared to the RME/FM group (p < .05). Specifically, there was about three times more advancement of the pterygomaxillary suture in the miniplate/FM group than in the RME/FM group (p < .05). Moreover, the advancement of the pterygomaxillary suture was about half the advancement of A point in the miniplate/FM group, while only about 25% in the RME/FM group. Finally, the miniplate/FM group showed an increase in the transverse dimension of the posterior and superior parts of the maxilla (p < .05). CONCLUSION: There was greater forward movement of the pterygomaxillary suture with facemask therapy using the skeletal anchorage compared to tooth-borne anchorage, leading to a more significant advancement of the maxilla and midface.

Class III camouflage orthodontic treatment in adult patient with anterior crossbite and abnormal functional shift: A case report

@#Skeletal Class III malocclusion is a complex malformation with a prevalence of 81.6% in Airlangga University Dental Hospital, distributed in patients aged 15-45 years old. Camouflage treatment of skeletal Class III malocclusion improves prognosis with a mild-to-moderate shift. This study aimed to discuss orthodontic camouflage as an option for adult patients with Class III malocclusion, emphasizing its indications, implications, and expected results. This report presents the case of a 17-year-old male patient with poor facial aesthetics associated with protruded chin, abnormal functional shift, and temporomandibular joint pain. The facial profile was concave with lower anterior multiple diastemas, mandibular lip protrusion, mandibular displacement, and anterior crossbite. This case was treated by camouflage therapy using straight wire appliance system combined with elastic class III. After 24 months of treatment during the pandemic, the mandibular displacement and the crossbite were corrected, the teeth were arched, the anterior crossbite fixed, and the profile became convex. Camouflage orthodontic treatment can be an effective management option to achieve functional occlusion, stability, and a satisfactory aesthetic impression in adult patients with mild to moderate skeletal Class III deformities, anterior cross bite, and functional shift.

Skeletal Class III phenotype: Link between animal models and human genetics: A scoping review.

This study aimed to identify evidence from animal studies examining genetic variants underlying maxillomandibular discrepancies resulting in a skeletal Class III (SCIII) malocclusion phenotype. Following the Manual for Evidence Synthesis of the JBI and the PRISMA extension for scoping reviews, a participant, concept, context question was formulated and systematic searches were executed in the PubMed, Scopus, WOS, Scielo, Open Gray, and Mednar databases. Of the 779 identified studies, 13 met the selection criteria and were included in the data extraction. The SCIII malocclusion phenotype was described as mandibular prognathism in the Danio rerio, Dicentrarchus labrax, and Equus africanus asinus models; and as maxillary deficiency in the Felis silvestris catus, Canis familiaris, Salmo trutta, and Mus musculus models. The identified genetic variants highlight the significance of BMP and TGF-ß signaling. Their regulatory pathways and genetic interactions link them to cellular bone regulation events, particularly ossification regulation of postnatal cranial synchondroses. In conclusion, twenty genetic variants associated with the skeletal SCIII malocclusion phenotype were identified in animal models. Their interactions and regulatory pathways corroborate the role of these variants in bone growth, differentiation events, and ossification regulation of postnatal cranial synchondroses.

Efficacy of Clear Aligners in Treating Class III Malocclusion With Mandibular Molar Distalization: A Systematic Review.

The primary goal of orthodontic therapy in pseudo-class III is to restore the proper dental connection by rectifying the canine and molar relationship to Class I through lower molar and premolar visualization, as well as providing normal anterior overjet. The purpose of this systematic study was to determine the efficacy of clear aligners in treating class III malocclusion with mandibular molar distalization. A wide range of searches were done on various search engines like Cochrane, Web of Science, Embase, PubMed, Scopus, and Google Scholar to collect relevant articles related to our study. This review's article selection was guided by the PRISMA flowchart. The electronic findings provided numerous articles with nearly 78 articles regarding clear aligners in class III malocclusion with molar distalization. From this, seven full-text papers were evaluated for eligibility criteria, with two articles being rejected with justification and five articles being elaborated in the current systematic review. The current evidence of this review suggested that the clear aligners were effective in correcting class III malocclusion with molar distalization. The amount of molar distalization is about 2 to 3 mm, which helps in achieving molar and canine relationship in class I, with a high compliance level and also improvement of the facial profile.

Effect of SEC III protocol on upper airway dimensions in growing class III patients: a retrospective study.

BACKGROUND: The primary objective of the study was to evaluate the effects of SEC III (Splints, Class III Elastics, and Chin cup) protocol on the upper airway dimensions using lateral cephalometric radiographs. The secondary objectives were to evaluate the skeletal and dental effects of the SEC III protocol using lateral cephalometric radiographs. METHODS: The pre- and post-treatment lateral cephalometric radiographs of 24 patients treated using the SEC III protocol were used to address the aim of the study. Children in the pre-pubertal (CS-1 or CS-2) or circumpubertal (CS-3 or CS-4) skeletal maturation stage and having class III dentoskeletal malocclusion were included in the study. Patients with a history of previous orthodontic treatment, maxillofacial surgery or trauma, tonsillectomy, adenoidectomy, or craniofacial malformations were excluded. The pre-treatment and post-treatment lateral cephalometric radiographs were traced, then airway measurements, skeletal measurements, and dental measurements were performed. The results were analysed using paired samples t-test or Wilcoxon signed rank test according to the data normality. RESULTS: Data of 6 males and 18 females were analysed (Mean age = 11.21 ± 1.02 years). Duration of active treatment was 5.75 ± 1.03 months. Treatment using SEC III protocol resulted in a significant increase in ANB angle (2.92 ± 1.50 degrees, p < 0.001) and Wits appraisal (3.31 ± 1.99 mm) (p < 0.001). The increase in the mandibular plane angle (0.75 ± 1.42 degrees, p = 0.02) and the maxillary length (2.29 ± 2.69 mm, p < 0.001) was statistically significant. Contrarily, the mandibular length did not change significantly (p = 0.10). The maxillary incisors were significantly proclined (4.38 ± 4.28 degrees; p < 0.001), while the mandibular incisors were significantly retroclined (-5.79 ± 6.21 degrees; p < 0.001) following treatment. The change in the nasopharyngeal airway and the retropalatal airway was not statistically significant. The middle and inferior pharyngeal space (retroglossal airway) significantly decreased by 1.33 ± 1.97 mm (p = 0.003) and 1.96 ± 2.48 mm (p = 0.001), respectively. CONCLUSIONS: Early class III correction using SEC III protocol reduced the retroglossal airway dimensions but did not affect the nasopharyngeal and retropalatal airway dimensions. Correction of the class III dentoskeletal relationship was obtained through both skeletal and dental changes.