Adhesion and sealing of different universal adhesive systems associated with bulk-fill resins after using endodontic irrigation solutions: An in vitro study.

This study aimed to evaluate the interface of universal adhesive (UA) with bulk-fill resin (BF) and dentin, after endodontic irrigation. The pulp chamber of 96 molars was irrigated with chlorhexidine 2% (CHX) or sodium hypochlorite 5.25% (NaOCl) and restored according to three restorative protocols. Microtensile bond strength (µTBS) and nanoleakage tests were performed after 24 h of thermocycling. Kruskal Wallis, Mann-Whitney and Wilcoxon were performed (p < 0.05). Comparing restorative systems, a difference was found only when irrigated with CHX after 24 h. CHX provided higher µTBS than NaOCl after 24 h for two restorative protocols; after thermocycling, NaOCl provided the greatest µTBS than CHX for one group. Decreased µTBS was observed for all restorative systems when CHX was used after thermocycling. NaOCl demonstrated the highest nanoleakage. The composition of UA influenced the immediate adhesion and sealing to BF when CHX was used; ageing has a deteriorating effect on adhesion and sealing for all restorative systems.

Exploring the role of flavonoids in caries-affected dentin adhesion: A comprehensive scoping review.

OBJECTIVES: The aim of this scoping review was to evaluate the available scientific evidence regarding the use of flavonoids in the treatment of caries-affected dentin focusing on bonding to dentin. METHODS: A comprehensive literature search was performed in five databases from March 2022 and updated in April 2023: PubMed, EMBASE, Scopus, Web of Science, and Scielo. Additionally, the references of included studies were manually searched. Gray literature was excluded from the review. STUDY SELECTION: Inclusion criteria included in vitro, in situ, and in vivo studies (animal or human) published in English. Abstracts, reviews, case reports, book chapters, doctoral dissertations, guidelines, and studies using pure plant extracts were excluded. Data collected from the selected studies were summarized and subjected to narrative and descriptive analysis. Out of the 91 studies identified, only 16 studies met the inclusion criteria. RESULTS: The review analyzed eight different flavonoids (hesperidin, galardin, proanthocyanidin, genipin, quercetin, naringin, epigallocatechin-3-gallate, and other catechins subtypes) used as pretreatment or loaded into adhesive systems, primers, and phosphoric acid. The use of flavonoids improved the mechanical properties of the materials and modified the biological properties of the dentin, reducing collagen loss by the inhibition of proteolytic activity of matrix metalloproteinases (MMPs). CONCLUSIONS: Based on the findings of this scoping review, it can be concluded that the use of flavonoids as pretreatment or incorporation into dental materials preserves collagen in the hybrid layer, inhibiting the MMPs activities, modifying the collagen fibrils of the dentin matrix and improving the mechanical properties of the dental adhesive systems. Therefore, it represents a promising approach for promoting dentin biomodification. This can result in more stable bonding of adhesive restorations to caries-affected dentin.

Chemical analysis of n-propyl gallate used as pre-treatment for resin-dentin bond strength: In vitro study.

This study aimed to evaluate the effect of n-propyl gallate as pre-treatment for resin-dentin bond strength. The dentin pre-treatments evaluated included propyl gallate of concentrations 0.1% (w/v), 1.0% (w/v), and 10.0% (w/v), as well as glutaraldehyde 5.0% (v/v), and distilled water as a control treatment. Dentin specimens were prepared for Fourier Transformed Infrared Spectroscopy (FT-IR) (n = 3/pre-treatment). Pre-treatments were actively applied to dentin blocks before performing the adhesive procedure to composite resin. Microtensile bond strength to dentin (µTBS) (n = 8/pre-treatment) was determined after 24 h and 6 months of storage. Data were submitted to a two-way ANOVA, followed by Tukey's post hoc test. As for FT-IR, propyl gallate 1%-treated specimens presented higher water, carbonate, collagen, and amide absorbance rates compared to other tested groups, while specimens pre-treated with glutaraldehyde and distilled water presented similar absorbance curves. Regarding µTBS, all concentrations of propyl gallate resulted in statistically significant higher bond strength values than distilled water at 24 h. After 6 months of storage, propyl gallate 0.1% was the only group that maintained µTBS over time. Propyl gallate 0.1% might be a suitable dentinal pre-treatment due to being able to present chemical bonds with demineralized dentin and providing resin-dentin bond stability after 6 months of storage.

Medium-term evaluation of the bond strength and dentin penetration of self-adhesive resin cements to root dentin.

BACKGROUND: Medium-term evaluate the bond strength and tag formation in root dentin using self-adhesive cements Maxcem Elite (MCE), Relyx U200 (RU2), SeT PP (SPP) and Megalink (MGL) compared to conventional cement Relyx ARC (ARC) for glass fibre post cementation. MATERIALS AND METHODS: One hundred bovine incisors roots were endodontically treated and divided into 5 groups (n = 20) according to the cementation system: MCE, RU2, SPP, MGL and ARC. All cementation systems were evaluated at 24 h (1) and 12 months (2) after post cementation. Specimens from the cervical, middle and apical thirds of the root were submitted to push-out bond strength test and confocal laser microscopy to verify the dentin penetration. The adhesive failure mode was classified as adhesive, cohesive and mixed. Data were analysed by one-way ANOVA and Tukey tests (α = 5%). RESULTS: ARC-1 and ARC-12 showed the highest bond strength (P < 0.05). ARC showed the greatest tag extension, regardless of the third (P < 0.05). The most frequent failure mode in the 24-h analysis was cohesive, regardless of the cement used. For the 12-month analysis, mixed failure was the most frequent. CONCLUSION: Conventional cement (ARC) showed the highest bond strength and tag extension, regardless of the evaluation period. In all cementation systems, the bond strength decreased after 12 months. © 2023 Australian Dental Association.

Five-year clinical evaluation of universal adhesive applied following different bonding techniques: A randomized multicenter clinical trial.

OBJECTIVES: To evaluate the clinical performance of a universal adhesive system (Futurabond U, Voco) when applied following different adhesive strategies in non-carious cervical lesions (NCCLs) after 5 years. METHODS: Fifty participants were included. Futurabond U (Voco) was applied in NCCLs using four adhesive strategies (n = 50 each): only self-etch (SE); selective enamel etching + self-etch (SET + SE); etch-and-rinse with dry dentin (ERD); and etch-and-rinse with wet dentin (ERW). All cavities were restored with Admira Fusion composite resin (Voco). Restorations were evaluated after 1, 3, and 5 years using the World Federation criteria (FDI) and the modified United States Public Health Service (USPHS) criteria. RESULTS: After 5 years, retention rates were 81 % (65.8-90.5) for SE, 87 % (73.2-94.4) for SET + SE, 84 % (69.6-92.6) for ERD, and 78 % (63.6-88.9) for ERW (p > 0.05). Thirty-five restorations were considered to have minor discrepancies in marginal adaptation at the 5-year recall (14 for SE, 9 for SET + SE, 6 for ERD, and 6 for ERW; p > 0.05). Sixteen restorations were detected as a minor marginal discoloration (6 for SE, 4 for SET + SE, 1 for ERD, and 5 for ERW; p > 0.05) and one restoration showed a recurrence of caries (1 for ERW; p > 0.05) at the 5-year recall. No restorations showed postoperative sensitivity after 5 years. SIGNIFICANCE: NCCLs restorations using a universal adhesive showed satisfactory clinical performance after 5 years, regardless of the adhesive strategy.

Fatores que influenciam o perfil de conhecimento dos cirurgiões-dentistas brasileiros sobre sistemas adesivos / Factores que influyen en el perfil de conocimiento de los odontólogos brasileños sobre los sistemas adhesivos / Factors that influence the knowledge profile of Brazilian dental professionals about dental adhesive systems

Os sistemas adesivos estão diretamente envolvidos nos procedimentos mais corriqueiros da prática clínica odontológica, o que torna o seu conhecimentoindispensável para os profissionais. O objetivo do presente estudo foi avaliar o perfil de conhecimento sobre sistemas adesivos e verificar os fatores que influenciam nesse desfecho, com ênfase na formação profissional. A coleta de dados foi realizada pormeio de um questionário levando em consideração: I. Perfil do profissional; II. Conhecimento, uso e preferências sobre os sistemas adesivos. A amostra foi composta por 501 cirurgiões-dentistas brasileiros e os dados foram analisados no programa Sigma Stat5.0 (p<0,05). O percentual mínimo de acertos das questões considerado adequado foi definido como 80%. Os resultados mostraram que apenas 46,3% dos profissionais demonstraram conhecimento adequado sobre o assunto. Além disso, verificou-se associação estatisticamente significativa entre o baixo nível de acertos e profissionais com preferência por sistemas adesivos simplificados (p=0,046), especialistas em ortodontia [OR=0,24 (0,08-0,67)] e cirurgiões-dentistas graduados em instituições privadas [OR=1,58 (1,03-2,42)]. Esse cenário alerta para a necessidade iminente de sanar essa fragilidade por meio de melhorias nas matrizes curriculares, além da educação continuada de docentes e constante atualização dos profissionais (AU).

Los sistemas adhesivos están directamente involucrados en los procedimientos más comunes de la práctica clínica dental, lo que hace que su conocimiento sea fundamental para los profesionales. El objetivo del presente estudio fue evaluar el perfil de conocimiento sobre sistemas adhesivos y verificar los factores que influyen en ese resultado, con énfasis en la formación profesional. La recolección de datos se realizó a través de un cuestionario teniendo en cuenta: I. Perfil del profesional; II. Conocimiento,uso y preferencias sobre los sistemas adhesivos. La muestra estuvo compuesta por 501 dentistas brasileños y los datos fueron analizados mediante el programa Sigma Stat 5.0 (p<0,05). El porcentaje mínimo de respuestas correctas a las preguntas considerado adecuado se definió en el 80%. Los resultados mostraron que sólo el 46,3% de los profesionales demostraron conocimientos adecuados sobre el tema. Además, hubo una asociación estadísticamente significativa entre el bajo nivel de aciertos y los profesionalescon preferencia por los sistemas adhesivos simplificados (p=0,046), especialistas en ortodoncia [OR=0,24 (0,08-0,67)] y odontólogos egresados de instituciones privadas [OR=1,58 (1,03-2,42)]. Este escenario advierte de la inminente necesidad de subsanar esta debilidad a través de mejoras en las matrices curriculares, además de la formación continua de los docentes y la constante actualización de los profesionales (AU).

Dental adhesive systems are directly involved in common procedures of clinical dentistry, which makes knowledge about this topic indispensable for professionals. The objectives of the current study are to analyze the knowledge profile of dental professionals about dental adhesive systems and verify factors that influence this closure, with emphasis on professional education. The data was collected using a list of questions that consider: I) Professional profile and II) Knowledge, use, and preferences of adhesive systems. The sample considers 501 Brazilian dentists and the data was analyzed using the software Sigma Stat 5.0 (p<0.05). The minimum percentual of correct questions considered adequate was defined as 80%. The results show that only 46.3% of the professionals demonstrated satisfactory knowledge on the subject. In addition, it verified relevant statistical association between low level of correct questions and professionals with preferences for simplified adhesive systems (p=0.046), orthodontic specialists [OR=0.24 (0.08­0.67)], and dentists with private education degrees [OR=1.58 (1.03­2.42)]. This context indicates the imminent necessity to resolve this weakness through improvements in the educational curriculum, as well as continuing education of faculty and constant updating of professionals (AU).

Some Myths in Dentin Bonding: An Evidence-Based Perspective.

Laboratory investigations are essential models responsible for science development. However, laboratory discoveries must be confirmed in a clinical environment where many known and unknown variables and complex mechanisms are involved. Using conclusions from laboratory studies to make clinical recommendations can lead to widespread "unreliable truths" or so-called myths in any field of knowledge. These myths may increase the costs (financial and time) or even cause harm (side effects) that would be unnecessary, given that the current protocol or conduct was previously evaluated in a more complex and complete clinical setting. This article will discuss certain myths in dentin bonding that may influence clinical decision-making, bringing some principles of evidence-based practice to allow a more critical evaluation of the literature findings.

Efecto de diferentes condiciones y modos de aplicación sobre la fuerza de unión de los adhesivos a la dentinaEffect of different conditions and modes of application on bond strength of adhesives to dentine / Effect of different conditions and modes of application on bond strength of adhesives to dentine

Objective: To evaluate the microtensile bond strength in different dentine conditions (etched-E, non-etched-N, dry-D and wet-W) of a multimode adhesive (Scotchbond Universal-SU, 3M/ESPE) and a total etching adhesive (Ambar-AB, FGM) using a sonic device (Smart Sonic Device-SD, FGM). Material and methods: In this in vitro study, ninety six sound extracted human molars were divided into 12 groups (n=8) according to different dentine conditions and adhesive systems. Enamel was removed and the middle dentine surfaces were polished. Each adhesive system was applied according to the different dentine conditions, and composite resin blocks were incrementally built up and stored for 24 hours. Specimens were sectioned into sticks and bond strength data were analyzed with the Kruskal-Wallis test and Mann-Whitney U tests. Results: No effects of sonic application and were observed. In general, AB showed lower results compared to the SU. E and N conditions did not statistically affect the bond strength of SU groups. Dry dentine presented statistically superior bond strength values when compared to wet dentine for SU/E/SD group. Conclusion: Adhesion of dry dentine with multimode adhesive system may be superior to wet dentine with sonic application. The modes of application had no influence in bond strength of studied adhesives.

Objetivo: Evaluar la resistencia de la unión microtensil en diferentes condiciones de dentina (grabado-E, sin grabado-N, seco-D y húmedo-W) de un adhesivo multimodo (Scotchbond Universal-SU, 3M/ESPE) y un adhesivo de grabado total (Ambar-AB, FGM) utilizando un dispositivo sónico (Smart Sonic Device-SD, FGM). Material y Métodos: En este estudio in vitro, noventa y seis molares humanos extraídos sanos se dividieron en 12 grupos (n=8) de acuerdo con diferentes condiciones de dentina y sistemas adhesivos. Se eliminó el esmalte y se pulieron las superficies centrales de la dentina. Cada sistema adhesivo se aplicó de acuerdo con las diferentes condiciones de dentina, y los bloques de resina compuesta se acumularon de forma incremental y se almacenaron durante 24h. Las muestras se seccionaron en barras y los datos de resistencia de la unión se analizaron con la prueba de Kruskal-Wallis y la prueba de U de Mann-Whitney. Resultado: No se observaron efectos de la aplicación sónica. En general, AB mostró resultados más bajos en comparación con el SU. Las condiciones E y N no afectaron estadísticamente la fuerza de unión de los grupos SU. La dentina seca presentó valores de fuerza de adhesión estadísticamente superiores en comparación con la dentina húmeda para el grupo SU/E/SD. Conclusión: La adhesión de la dentina seca con un sistema adhesivo multimodo puede ser superior a la dentina húmeda con aplicación sónica. Los modos de aplicación no tuvieron influencia en la resistencia de la unión de los adhesivos estudiados.

Effect of endodontic sealers on push-out bond strength of CAD-CAM or prefabricated fiber glass posts

Abstract This study aimed to evaluate the effect of endodontic sealer (ES) on bond strength (BS) of prefabricated or milled-CAD-CAM (computer-aided design and computer-aided manufacturing) glass-fiber-posts (GFP). Canals of 90 single-rooted teeth were prepared for filling by the single-cone technique with gutta-percha and one of the following ES: AH Plus (epoxy resin), Endofill (zinc-oxide and eugenol), and Bio-C Sealer (calcium-silicate). After post-space preparation, tooth-specimens were equally divided in half according to type of GFP to be used. In the half to receive milled-CAD-CAM posts, tooth specimens were molded with acrylic resin to obtain replicas. These were scanned to enable the laboratory to produce the milled-CAD-CAM GFPs (Fiber CAD Lab, Angelus) by the subtractive technique. The other half of samples received prefabricated GFPs (Exacto, Angelus) (n=15). The GFPs were cemented with dual-cure resin cement (Panavia F2.0, Kuraray). Each root was sectioned into two slices per root region (cervical, middle, apical) that were subjected to the push-out BS test, in a universal testing machine. Failure mode (FM) was classified by scores. The BS data were submitted to generalized linear model analyses, while FM was analyzed using the chi-square test (a=0.05). BS showed no significant difference among the three ES (p > 0.05). BS was significantly higher for prefabricated (mean 10.84 MPa) versus milled-CAD-CAM GFPs (mean 6.94 MPa) (p <0.0001), irrespective of ES. The majority showed mixed failures. It could be concluded that type of ES did not affect BS of GFPs to dentin, and prefabricated-GFPs had higher bond-strength than customized-milled-CAD-CAM GFPs.

Dentin permeability after pretreatment with titanium tetrafluoride and self-etching or universal adhesive systems

Aim: To evaluate dentin permeability after pretreatment with 2.5% aqueous solution of titanium tetrafluoride (TiF4), followed by a self-etching universal adhesive system. Methods: Forty dentin discs (1.5 mm thick) were randomly divided into groups according to the application or non-application of a pretreatment, and the type of adhesive system to be tested (two-step self-etching/ Clearfil SE Bond/ Kuraray Medical, or universal adhesive system/ Single Bond Universal/ 3M ESPE). Both sides of the discs were conditioned with 37% phosphoric acid to remove the smear layer. The first hydraulic conductivity measurement (L1) was performed in a permeability machine, under 5 PSI pressure. The samples were sanded again to form a standardized smear layer. The teeth designated for pre-treatment with TiF4 received the TiF4 solutions applied actively for 60 seconds, and the adhesive systems were applied according to the manufacturer's instructions. Then, a new hydraulic conductivity measurement (L2) was performed for the purpose of calculating the hydraulic conductance at a later time, considering the water viscosity and the thickness of the specimen. The percentage (L) of dentin permeability after application of the adhesive system was obtained (L (%) = [(L1-L2) x100] / L1). The Mann-Whitney non-parametric test was applied. Results: There was no difference between the two adhesive systems, or between the groups with or without pretreatment, as regards dentin permeability (p>0.05). Conclusion: Pretreatment with 2.5% TiF4 did not influence dentin permeability, irrespective of the adhesive system used

Impacto da irradiação com laser ND: YAG sobre primer de adesivo convencional na adesão à dentina / Impact of Nd: YAG laser irradiation on primer of conventional adhesive in adhesion to dentin

A irradiação da dentina com o laser Nd:YAG mostra-se promissora para a qualidade da adesão, desde que aplicada sob parâmetros específicos e em etapas definidas. O objetivo deste estudo é avaliar de forma comparativa, o impacto da irradiação com laser de Nd:YAG sobre a formação e estabilidade da camada híbrida em dentina humana, pré-tratada com ácido e primer de sistema adesivo convencional, "in vitro". Setenta molares hígidos tiveram suas raízes e porções coronárias seccionadas horizontalmente, até completa exposição de dentina oclusal. As amostras foram divididas em: G1 (controle n=20); G2 (experimental n=20), sendo 10 dentes de cada grupo destinados ao microcisalhamento (MC) e 10 dentes à microscopia eletrônica de varredura (MEV). Nos 30 dentes restantes analisou-se: textura por Tomografia Computadorizada de Feixe Cônico (AT=15); e Espectroscopia de Infravermelho por Transformada de Fourier (FTIR=15) em 3 momentos: dentina controle; após tratamento com ácido + primer; e posterior à irradiação a laser. Estatisticamente, optou-se por ANOVA 1 fator, Qui Quadrado de Pearson, teste T e múltiplas comparações de Tukey com significância de 5%. A FTIR evidenciou redução dos níveis de fosfato e carbonato nos momentos primer e após irradiação laser, porém não havendo desnaturação do colágeno exposto. A análise de textura evidenciou uma tendência à formação de um tecido mais padronizado após o uso do laser. O teste de MC evidenciou valores médios de 36,5 e 35,2MPa para G1 e G2 respectivamente (p>0,05) e portanto, de forma imediata, o laser não mostrou efeitos deletérios ao processo adesivo. Além disso, observou-se maior penetrabilidade do adesivo na avaliação em MEV após a aplicação do laser. Novas pesquisas com avaliação longitudinal mostram-se necessárias para verificar se o efeito do laser pode ter sido protetor da degradação hidrolítica, visto que há uma redução do conteúdo de água local durante a formação da camada híbrida (AU).

Irradiation of dentin with the Nd:YAG laser shows promise for the quality of adhesion, as long as it is applied under specific parameters and in defined steps. The objective of this study is to comparatively evaluate the impact of irradiation with Nd:YAG laser on the formation and stability of the hybrid layer in human dentin, pretreated with acid and primer of conventional adhesive system, "in vitro". Seventy healthy molars had their roots and coronal portions horizontally sectioned, until complete exposure of occlusal dentin. The samples were divided into: G1 (control n=20); G2 (experimental n=20), with 10 teeth from each group destined for microshearing (MC) and 10 teeth for scanning electron microscopy (SEM). In the 30 remaining teeth analyzed: texture by Cone Beam Computed Tomography (AT=15); and Fourier Transform Infrared Spectroscopy (FTIR=15) in 3 moments: dentin control; after treatment with acid + primer; and after laser irradiation. Statistically, we opted for 1-way ANOVA, Pearson's Chi Square, T test and Tukey's multiple comparisons with a significance of 5%. FTIR showed a reduction in phosphate and carbonate levels in the primer moments and after laser irradiation, but there was no denaturation of the exposed collagen. The texture analysis evidenced a trend towards the formation of a more expressive tissue after the use of the laser. The CM test showed mean values of 36.5 and 35.2MPa for G1 and G2 respectively (p>0.05) and therefore, immediately, the laser showed no deleterious effects on the adhesive process. In addition, greater penetrability of the adhesive was observed in the SEM evaluation after laser application. New studies with longitudinal evaluation are necessary to verify if the laser effect could have been protected from hydrolytic degradation, since there is a reduction in the local water content during the formation of the hybrid layer (AU).

Influence of self-etching adhesive on the bond strength of irradiated teeth / Influência do adesivo autocondicionante na resistência de união em dentes submetidos à radiação

ABSTRACT This study aimed to conduct a literature review about the influence of self-etching adhesives on the bond strength of restorative procedures for irradiated teeth. The search for articles was carried out on six databases (PubMed, Scopus, Web of Science, Embase, LILACS, Cochrane). Gray literature (Google Scholar) and reference lists of included studies were evaluated. The keywords used were: "Radiotherapy" OR "Radiation Therapy" OR "Radiation Treatment" OR "Radiation Effects" OR "Radioterapia" OR "Terapia por radiação" OR "Tratamento por radiação" OR "Efeitos da Radiação" OR "Terapia por Radiación" OR "Tratamiento por Radiación" OR "Efectos de Radiación" AND "Dentin-Bonding agent" OR "Adesivos Dentinários" OR "Recubrimientos Dentinarios". The inclusion criteria were laboratory and clinical studies, dissertations, literary and systematic reviews, and no time and language restrictions. Three hundred and eighteen studies were identified in the databases, 30 in the gray literature, and 5 from the reference list of included articles. 40 were excluded for being duplicates. After reading the title and abstract, 28 articles remained for complete analysis. In the end, 21 articles were included in this study. Self-etching could be a good option for irradiated teeth restorations. However, further clinical studies are needed.

RESUMO O objetivo deste trabalho foi realizar uma revisão integrativa da literatura sobre a influência de adesivos autocondicionantes na resistência de união de restaurações de dentes submetidos à radiação. A busca da literatura foi realizada em seis bases de dados (PubMed, Scopus, Web of Science, Embase, LILACS, Cochrane). A literatura cinza (Google Scholar) e as listas de referências dos estudos incluídos foram avaliadas. A pesquisa foi realizada com as palavras-chave: "Radiotherapy" OR "Radiation Therapy" OR "Radiation Treatment" OR "Radiation Effects" OR "Radioterapia" OR "Terapia por radiação" OR "Tratamento por radiação" OR "Efeitos da Radiação" OR "Terapia por Radiación" OR "Tratamiento por Radiación" OR "Efectos de Radiación" AND "Dentin-Bonding agent" OR "Adesivos Dentinários" OR "Recubrimientos Dentinarios". Os critérios de inclusão foram estudos in vitro e clínicos, dissertações, revisões sistemáticas e literárias, sem restrições de período e de idiomas. Foram identificados 318 estudos nas diferentes bases de dados, 30 na literatura cinzenta e 5 da lista de referências dos artigos incluídos, dos quais 40 foram excluídos por serem duplicatas. Após a leitura do título e do resumo, permaneceram 28 artigos para análise completa. Ao final, 21 artigos foram incluídos neste trabalho. Os adesivos autocondicionantes podem ser uma boa alternativa em restaurações de dentes submetidos à radiação. Todavia, ainda existem poucos trabalhos sobre o tema e ratifica-se a necessidade de mais estudos clínicos.

Do different adhesives influence the color stability and fluorescence of composite restorations after aging?

Abstract This study aimed to evaluate the influence of dental adhesive color on the chromatic stability and fluorescence intensity of composite resin restorations of different thicknesses. Ninety bovine enamel samples were obtained and restored with resin composite varying thicknesses of restorative material and enamel (1.0 mm enamel and 1.0 mm composite; 1.5 mm enamel and 0.5 mm composite; 0.5 mm enamel and 1.5 mm composite). The restorations were made of composite resin (Opallis E-bleach H) using different types of dental adhesives: Ambar, Ambar APS, and Single Bond Universal (n=10). The samples were subjected to color measurement tests in a spectrophotometer using CIEDE2000 and fluorescence intensity measurements before and after aging in a red wine coloring solution. Data were subjected to analysis of variance (ANOVA) and Tukey's test (α = 0.05). There were no statistically significant changes in color stability or fluorescence intensity for restorations made of different materials or thicknesses (p>0.05). Single Bond Universal showed greater color stability at 0.5 mm thickness (ΔE00 = 4.4 ± 1.6) compared to other thicknesses of the same material (p=0.003), as well as a greater difference in fluorescence intensity after aging at 1.5 mm thickness (-414.9 ± 103.8) compared to other materials (p=0.0002). Overall, it was concluded that the different adhesive systems did not influence the color stability and fluorescence of restorations of different thicknesses.

Resumo O objetivo deste estudo foi avaliar a influência da cor do adesivo dental na estabilidade cromática e intensidade de fluorescência das restaurações de resina composta de diferentes espessuras. Foram obtidos noventa amostras de esmalte bovino que foram restaurados com resina composta, variando a espessura do material restaurador e do esmalte (1,0 mm de esmalte e 1,0 mm de compósito; 1,5 mm de esmalte e 0,5 mm de compósito; 0,5 mm de esmalte e 1,5 mm de compósito). As restaurações foram feitas de resina composta (Opallis E-bleach H) utilizando diferentes tipos de adesivos odontológicos: Ambar, Ambar APS, e Single Bond Universal (n=10). As amostras foram submetidas a testes de medição de cor em um espectrofotômetro usando CIEDE2000 e medições de intensidade de fluorescência antes e depois do envelhecimento em uma solução de coloração de vinho tinto. Os dados foram submetidos à análise de variância (ANOVA) e ao teste de Tukey (α = 0,05). Não houve mudanças estatisticamente significativas na estabilidade da cor ou intensidade de fluorescência para restaurações feitas de diferentes materiais ou espessuras (p>0,05). O Single Bond Universal mostrou maior estabilidade de cor a 0,5 mm de espessura (ΔE00 = 4,4 ± 1,6) em comparação com outras espessuras do mesmo material (p=0,03), bem como uma maior diferença na intensidade de fluorescência após o envelhecimento a 1,5 mm de espessura (-414,9 ± 103,8) em comparação com outros materiais (p=0,0002). Em geral, concluiu-se que os diferentes sistemas adesivos não influenciaram a estabilidade de cor e a intensidade de fluorescência das restaurações de diferentes espessuras.

Universal adhesives applied to deep dentin with different bonding treatments / Adhesivos universales aplicados a dentina profunda con diferentes tratamientos de unión

ABSTRACT Eighth-generation adhesives may be applied with total etch, selective-etch or self-conditioning, and serve as primers for non-dental substrates. Aim: To determine the bonding characteristics of universal adhesives applied to the deep pulp wall with different strategies, by means of shear bond strength and laser microscopy. Materials and Method: Cavities 4 mm deep and maximum width were carved in 36 extracted molars. Nine groups were formed according to dental substrate treatment and adhesives, as follows: Total-etch: group 1-Monobond 7 self-etch, group 2-One coat 7 universal, and group 3-Single bond universal; Adamantine etch: group 4-Monobond 7 self-etch, group 5-One coat 7 universal, and group 6-Single bond universal; Self-conditioning: group 7-Monobond 7 self-etch, group 8-One coat 7 universal, and group 9-Single bond universal. Molars were filled following the manufacturer's instructions. Three specimens per group (27 altogether) were used to determine shear bond strength using a universal testing machine, while layer thicknesses were measured on the remaining specimens using microscope images and Olympus LEXT 3D Software. Analysis of variance was used to compare data. Results: Mean (standard deviation) bond strength in megapascals (MPa) was: group 1: 7.06±3.01; group 2: 10.74±4.36; group 3: 8.20±3.92; group 4: 7.41±2.23; group 5: 6.84±1.50; group 6: 5.86±2.10; group 7: 5.83±1.94; group 8: 7.14±2.37; group 9: 8.06±3.51. Bond strength was higher (p=0.049) for total-etch (8.61±3.96) than for selective etch (6.71±1.98) and self-conditioning (6.91±2.68). No significant difference was found among the three adhesives (p=0.205). Adhesive layer in micrometers (μm) was total-etch 8.71±4.93, selective etch 5.49±1.70 and self-conditioning 6.27±3.01, with no significant difference. Conclusions: There were significant differences among bonding strategies, with the highest values for total-etch. No significant difference was observed between self-conditioning and selective etch. No significant difference was found among the adhesives, which all behaved similarly. The greatest adhesive layer thicknesses were recorded in the total-etch group, with no significant difference among the various adhesive approaches.

RESUMEN Los adhesivos universales de octava generación pueden ser aplicados con diferentes estrategias de unión: grabado total, grabado selectivo o autoacondicionamiento. Además, imprimen sustratos no dentales. Objetivo: Determinar las caracteristicas de unión de adhesivos universales con diferentes estrategias en pared pulpar profunda mediante resistencia adhesiva al corte y microscopía laser. Materiales y Método: En 36 molares se tallaron cavidades de 4 mm de profundidad y ancho máximo. Se dividieron en 9 grupos según tratamientos y adhesivos. Grabado total: grupo 1-Monobond 7 self-etching, grupo 2-One coat 7 universal y grupo 3-Single bond universal; Grabado selectivo: grupo 4-Monobond 7 self-etching; grupo 5-One coat 7 universal y grupo 6-Single bond universal y Autoacondicionamiento: grupo 7-Monobond 7 self-etching; grupo 8-One coat 7 universal y grupo 9-Single bond universal. Las obturaciones se realizaron siguiendo las instrucciones del fabricante. La resistencia adhesiva al corte se determinó utilizando una máquina de ensayo universal sobre 27 especímenes mientras que los restantes fueron empleados para evaluar los espesores de la capa generado sobre imágenes obtenidas con microscopía y con el software Olympus LEXT 3D. Se ultilizó análisis de varianza. Resultados: Resistencia adhesiva en megapascal (MPa) media (desviación estándar): grupo 1: 7,06±3,01; grupo 2: 10,74±4,36; grupo 3: 8,20±3,92; grupo 4: 7,41±2,23; grupo 5: 6,84±1,50; grupo 6: 5,86±2,10; grupo 7: 5,83±1,94; grupo 8: 7,14±2,37; grupo 9: 8,06±3,51. Grabado total (8,61±3,96) registró los valores mayores (p=0,049) en comparación a grabado selectivo (6,71±1,98) y autoacondicionamiento (6,91±2,68). Los adhesivos no tuvieron diferencias significativas (p=0,205). Capa adhesiva en μm: Grabado total (8,71±4,93); grabado selectivo (5,49±1,70) y autoacondicionamiento (6,27±3,01) sin diferencias significativas (p=0,073). Conclusiones: Las estrategias de unión mostraron diferencias significativas; los valores más altos se obtuvieron con grabado total y entre autoacondicionamiento y grabado selectivo no hubo significancia. Los adhesivos evidenciaron comportamientos similares sin registrar diferencias significativas. Los mayores espesores de capa fueron con grabado total sin diferencias significativas entre las técnicas.

Dual-cured adhesive system improves adhesive properties of dentin cavities restored with a bulk-fill resin composite

Aim: To evaluate the impact of a dual-cured adhesive system on the in situ degree of conversion (DC), bond strength (BS) and failure mode (FM) of adhesive interfaces in dentin cavities restored with a bulk-fill resin composite. Methods: 4-mm-deep dentin cavities with a 3.1 C-factor were created in 68 bovine incisors (n = 17 per group). The lightcured (Scotchbond™ Universal) or the dual-cured (Adper™ Scotchbond™ Multi-purpose Plus) adhesive system was applied to the cavities, which were then restored with a bulkfill resin composite (Filtek™ Bulk Fill). In situ DC analysis was performed by means of micro Raman spectroscopy at the top and bottom interfaces. Push-out BS was measured in a universal testing machine after 24-h or 6-month water storage. FM was determined with a stereomicroscope. Data of in situ DC and BS were analyzed by two-way analysis of variance (ANOVA) and Tukey test (p<0.05), while the FM was analyzed descriptively. Results: The groups that received the dual-cured adhesive system showed statistically higher in situ DC and BS than those that received the light-cured adhesive system. Cohesive failure mode was the most frequent in all conditions. Conclusion: In situ DC and BS were influenced by the curing strategies of the adhesive systems with better performance of the dual-cured material

Influence of chlorhexidine 2% and sodium hypochlorite 5. 25% on micro-tensile bond strength of Universal adhesive system (G-Premio Bond)

Aim One of the reasons for the failure of adhesion in composite restorations and secondary caries may be the chemical irrigants used during the endodontic treatment. NaOCl is widely used for the biomechanical preparation of root canals due to its antimicrobial properties and capacity to dissolve organic material. In addition, another very effective decontamination solution is chlorhexidine 2%. There are few studies about the effect of root canal irrigation solutions on bond strength of universal adhesives therefore, in this study we have investigated the influence of CHX 2% and NaOCl 5.25% on micro-tensile bond strength of G-Premio Bond. Methods Twenty-four human teeth were randomly allocated to the following groups: G1, immersion in saline solution 0.9% for 30 minutes (control); G2, immersion in CHX 2% for 30 minutes; G3, immersion in NaOCl 5.25% for 30 minutes. After restoration, the dentin/resin interface was tested by micro-tensile bond strength. The surfaces morphology was analyzed by Scanning Electron Microscopy. Data were analyzed by ANOVA followed by Tukey test in SPSS software Version 24. Results There was a statistically significant difference between G3 and G1 (P < 0.05). There were no statistically significant differences among G1 and G2, G2 and G3. Conclusion Root canal irrigation with NaOCl 5.25% significantly reduced the micro-tensile bond strength in the G-Premio Bond at self-etch mode, but the use of CHX did not make a significant difference.

Uso de adhesivo universal con pregrabado y autograbado en tejidos duros del diente / Use of universal adhesive with pre-etch and self etch strategies on hard tooth tissues

RESUMEN Introducción: Buscando satisfacer la demanda con procedimientos adhesivos más rápidos, menos sensibles a la técnica y facilidad de uso, se han desarrollado los adhesivos universales, que brindan al profesional la opción de seleccionar la estrategia de adhesión con diferentes modos de grabado, ya sea con grabado y enjuague, autograbado o grabado selectivo. Debido a la poca información existente, se han generado dudas sobre el rendimiento, propiedades y la aplicación de una técnica adhesiva adecuada sobre los tejidos dentales. Objetivo: Determinar el nivel de adhesión con el uso de adhesivos universales en modo de grabado y enjuague y autograbado. Métodos: Se realizó una revisión de la literatura, a través de la búsqueda electrónica en las bases de datos: SciELO, Scopus, PubMed, Springer y EBSCO. Inicialmente se seleccionaron por título y resumen, artículos duplicados se consideraron solo una vez, se incluyeron artículos de acceso libre y pagos, escritos en idioma español e inglés, publicados desde el año 2015, de los cuales 39 artículos fueron seleccionados para el estudio. Conclusiones: El uso de adhesivos universales sobre dentina presenta un nivel de adhesión mayor cuando se aplica en modo de autograbado. La aplicación activa del adhesivo universal en esmalte mejora la fuerza y resistencia de unión. El nivel de adhesión en el esmalte es mayor cuando se aplica en modo de grabado y enjuague. La resistencia inicial y por fatiga del adhesivo, no mejora con los tiempos prolongados del grabado ácido.

ABSTRACT Introduction: universal adhesives have been developed to satisfy the demand with faster adhesive procedures, less sensitive to the technique and ease of use, which offer the professional the option of selecting the adhesion strategy with different etching modes, either with etch-and-rinse, self-etch or selective etching ones. Doubts have been generated about the performance, properties and application of an adequate adhesive technique on dental tissues due to the little existing information. Objective: to determine the level of adhesion with the use of universal adhesives in etch-and-rinse and self-etch modes Methods: an electronic search of the literature was carried out in SciELO, Scopus, PubMed, Springer and EBSCO databases. Initially, articles were selected by title and abstract, duplicate ones were considered only once, free and paid access articles, written in Spanish and English and published since 2015 were included; 39 of them were selected for the study. Conclusions: the use of universal adhesives on dentin presents a higher level of adhesion when applied in self-etch mode. The active application of the universal adhesive improves the enamel bond strength. The level of adhesion on the enamel is higher when applied in etch-and-rinse. The initial fatigue resistance of the adhesive does not improve with prolonged acid etching times.

Effects of using different root canal sealers and protocols for cleaning intraradicular dentin on the bond strength of a composite resin used to reinforce weakened roots / Efectos del uso de diferentes selladores de conductos radiculares y protocolos para limpiar la dentina intrarradicular sobre la fuerza de unión de una resina compuesta utilizada para reforzar raíces debilitadas

Background: This study evaluated the effects of using different root canal sealers and protocols for cleaning intraradicular dentin on the bond strength of a composite resin used to reinforce weakened roots. Material and Methods: Sixty-four roots of extracted human maxillary canines were weakened, prepared and filled with two different endodontic sealers (Endofill and AH Plus). In half of the sample, set aside for each respective sealer, excess filling material was cleaned. In the other half, the weakened areas were not cleaned, and the excess of sealer was spread on the intraradicular dentin. Intentionally worn areas inside each root were restored with a microhybrid light-cure composite resin (Z100) to reinforce them, with and without acid etching. Prefabricated metal posts were fixed with a dual resin cement (RelyX ARC), and the specimens were submitted to a pull-out test. Statistical analysis was performed by means of Shapiro-Wilk, analysis of variance (one-way ANOVA) and Tukey-Kramer tests (p<0.05). Results: The groups filled with Endofill (GI, GII, GIII, GIV) had the lowest bond strength values, which were similar among each other (p>0.05).The greatest bond strength values were observed in roots filled with AH Plus (GV, GVI, GVII, GVIII), mainly without cleaning of the weakened areas, and followed by acid etching (GVII), and also with cleaning of the weakened areas, however, with no acid etching (GVI) (p<0.05). Conclusion: The greatest bond strength values were observed in roots filled with AH Plus; (1) without cleaning of the weakened areas and with acid etching, and; (2) with cleaning of the weakened areas, but without acid etching.

Antecedentes: este estudio evaluó los efectos del uso de diferentes selladores de conductos radiculares y protocolos para limpiar la dentina intrarradicular sobre la fuerza de unión de una resina compuesta utilizada para reforzar las raíces debilitadas. Material y Métodos: Sesenta y cuatro raíces de caninos maxilares humanos extraídos fueron debilitadas, preparadas y rellenadas con dos selladores endodónticos diferentes (Endofill y AH Plus). En la mitad de la muestra, reservada para cada sellador respectivo, se limpió el exceso de material de relleno. En la otra mitad, las áreas debilitadas no se limpiaron y el exceso de sellador se esparció sobre la dentina intrarradicular. Las áreas desgastadas intencionalmente dentro de cada raíz se restauraron con una resina compuesta fotopolimerizable microhíbrida (Z100) para reforzarlas, con y sin grabado ácido. Los postes metálicos prefabricados se fijaron con un cemento de resina dual (RelyX ARC) y los especímenes se sometieron a una prueba de extracción. El análisis estadístico se realizó mediante Shapiro-Wilk, análisis de varianza (ANOVA de una vía) y pruebas de Tukey-Kramer (p<0,05). Resultados: Los grupos rellenos con Endofill (GI, GII, GIII, GIV) presentaron los valores más bajos de fuerza de unión, los cuales fueron similares entre sí (p>0,05). Los mayores valores de fuerza de unión se observaron en raíces rellenas con AH Plus (GV, GVI, GVII, GVIII), principalmente sin limpieza de las áreas debilitadas, seguido de grabado ácido (GVII), y también con limpieza de las áreas debilitadas aunque sin grabado ácido (GVI) (p<0.05). Conclusión: Los mayores valores de fuerza de unión se observaron en las raíces rellenas con AH Plus; (1) sin limpieza de las áreas debilitadas y con grabado ácido, y; (2) con limpieza de las áreas debilitadas, pero sin grabado ácido.

Methacrylic monomer derived from cardanol incorporated in dental adhesive as a polymerizable collagen crosslinker.

OBJECTIVES: The aim of this study was to evaluate the influence on MMP inhibition, dentin adhesion and physicochemical properties of an adhesive system incorporated with polymerizable collagen crosslinker monomer derived from cardanol. METHODS: The intermediary cardanol epoxy (CNE) was synthesized through cardanol epoxidation, followed by synthesis of cardanol methacrylate through methacrylic acid solvent-free esterification. Zymographic analysis was performed to evaluate the substances' ability to inhibit gelatinolytic enzymes. Collagen crosslinkers were added into adhesives systems according to the following groups: Ybond Universal® (Control), Ybond® + 2 % proanthocyanidin (PAC), Ybond® + 2 % unsaturated cardanol (Cardanol) and Ybond® + 2 % cardanol methacrylate (CNMA). Degree of conversion (DC) of the adhesives was assessed by FT-IR. Disk-shaped specimens were prepared for water sorption (WS) and solubility (SL) tests. Human third molars were sectioned to expose medium dentin and restored according to the different adhesives used (n = 5). Then, the specimens were cut into 1 mm2 sticks to evaluate, after 24 h and 6-month aging, microtensile bond strength (µTBS) and nanoleakage by scanning electron microscopy. Data were analysed with ANOVA and Tukey's post-test (α = 0.05). RESULTS: CNMA and PAC completely inhibited all forms of gelatinolytic enzymes. Cardanol achieved a significantly lowest DC, while the other groups did not differ from each other (p > 0.05). PAC achieved significantly higher water sorption, while CNMA solubility was significantly lower when compared to the other adhesives (p < 0.05). PAC provided a statistically higher 24 h and 6-month aging bond strength. Intermediary similar µTBS were presented by control and CNMA (p = 0.108). All adhesives applied attained significantly reduced bond strength after aging (p < 0.05). Interfaces created using CNMA were almost devoid of silver deposits initially, however all groups showed large amounts of silver deposits on resin-dentin interface subjected to water aging. SIGNIFICANCE: Although CNMA was effective in inhibiting gelatinolytic enzymes, when incorporated into a universal adhesive it could not promote less degradation of the adhesive interface after water aging. Since it is a hydrophobic monomer, CNMA did not interact well with dentin collagen, however it reduced the solubility of the adhesive system besides not interfering in its polymerization.

In Vitro Evaluation of Bond Strength to Dentin of Two Post Systems: Computer-aided Design and Computer-aided Manufacturing Fiber Posts vs Splendor Single Adjustable Post.

AIM: To assess dentin-post bond strength and mode of failure through tensile strength testing of two endodontic post systems: CAD/CAM custom-milled fiber posts vs Splendor SAP. MATERIALS AND METHODS: Thirty extracted single-rooted mandibular premolars were sectioned 2 mm coronal to the cementoenamel junction. Root length was standardized at 15 mm, and the root canals were instrumented with #20 K-files followed by 30/0.03 and 30/0.05 ProDesign Logic rotary files, under irrigation with 2.5% NaOCl, and then submitted to final irrigation with 17% EDTA. Canals were filled with gutta-percha and AH PLUS sealer. After 24 hours, the teeth were prepared for post placement to a depth of 10 mm and randomly allocated into two experimental groups (n = 15): CAD/CAM (CC) and Splendor SAP (SS). All posts were cemented with RelyX U200 dual-cure self-adhesive resin cement. The roots were embedded in acrylic resin, and the specimens were stored for 7 days in moist heat (37°C). Tensile strength testing until failure was then performed in a universal testing machine using a crosshead speed of 0.5 mm/minute. The final failure load was tabulated for statistical analysis, and the G test was used to compare the failure modes observed under light microscopy (5× magnification). RESULTS: There was no significant difference between groups regarding tensile bond strength to root dentin (p = 0.325). Conversely, failure mode differed significantly between groups (p = 0.037). CONCLUSION: The tensile bond strength observed for the CAD/CAM and Splendor SAP post systems was similar. Adhesive failure was predominant in both groups; however, the CAD/CAM custom-milled fiber posts failed predominantly at the dentin-resin cement interface, whereas Splendor SAP posts failed mostly at the post-resin cement interface. CLINICAL SIGNIFICANCE: A strong post-dentin bond is a key to the success of dental restorations and prosthetic rehabilitation. In teeth with severe coronal decay and wide canals, both of the tested systems would be able to achieve good cervical fit.