Low-Power Magnetic Displacement Sensor Based on RISC-V Embedded System.

With the emergence of RISC-V architecture in embedded devices, its inherent low-power features have propelled its extensive adoption across various industrial settings. Displacement sensors leveraging Hall sensors and magnetic flux measurement present notable benefits including cost-effectiveness and compact design. This study undertakes the porting of Hall sensors onto RISC-V architecture embedded devices, validating their functionality within displacement sensors. Empirical investigations substantiate that the ported system consistently delivers comparable outcomes to those obtained from x86 architecture systems employing PM-MFM methods, affirming its reliability and performance in practical applications.

Displacement Assay in a Polythiophene Sensor System Based on Supramacromolecuar Disassembly-Caused Emission Quenching.

Exploring new methodologies for simple and on-demand methods of manipulating the emission and sensing ability of fluorescence sensor devices with solid-state emission molecular systems is important for realizing on-site sensing platforms. In this regard, although conjugated polymers (CPs) are some of the best candidates for preparing molecular sensor devices owing to their luminescent and molecular recognition properties, the development of CP-based sensor devices is still in its early stages. In this study, we herein propose a novel strategy for preparing a chemical stimuli-responsive solid-state emission system based on supramacromolecular assembly-induced emission enhancement (SmAIEE). The system was spontaneously developed by mixing only the component polymers (i.e., polythiophene and a transient cross-linking polymer). The proposed strategy can be applied to the facile preparation of molecular sensor devices. The analyte-induced fluorescent response of polythiophene originated from the dynamic displacement of the transient cross-linker in the polythiophene ensemble and the generation of the polythiophene-analyte complex. Our successful demonstration of the spontaneous preparation of the fluorescence sensor system by mixing two component polymers could lead to the development of on-site molecular analyzers including the determination of multiple analytes.

Biomechanical characterization of the central fibrous region of the forearm interosseous Membrane: Implications for finite element modeling.

The interosseous membrane (IOM) of the forearm plays a crucial role in facilitating forearm function and mechanical load transmission between the radius and ulna. Accurate characterization of its biomechanical properties is essential for developing realistic finite element models of the forearm. This study aimed to investigate the mechanical behavior and material properties of the central fibrous regions of the IOM using fresh frozen cadavers. Ten forearms from five cadavers were dissected, preserving the IOM and identifying the distal accessory band (DAB), central band (CB), and proximal accessory band (PAB). Bone-ligament-bone specimens were prepared and subjected to uniaxial tensile testing, with the loading direction aligned with the fiber orientation. Force-displacement curves were obtained and converted to force-strain and stress-strain curves using premeasured fiber lengths and cross-sectional areas. The results demonstrated distinct mechanical responses among the IOM regions, with the PAB exhibiting significantly lower force-strain behavior compared to the DAB and CB. The derived force-strain and stress-strain relationships provide valuable insights into the regional variations in stiffness and strength of the IOM, highlighting the importance of considering these differences when modeling the IOM in finite element analysis. In conclusion, this study establishes a foundation for the development of advanced finite element models of the forearm that accurately capture the biomechanical behavior of the IOM.

High-throughput microalgae sorting based on the deterministic lateral displacement technique.

Microalgae are a group of photosynthetic organisms that can grow autotrophically, performing photosynthesis to synthesize abundant organic compounds and release oxygen. They are rich in nutritional components and chemical precursors, presenting wide-ranging application prospects. However, potential contamination by foreign strains or bacteria can compromise their analytical applications. Therefore, the obtaining of pure algal strains is crucial for the subsequent analysis and application of microalgae. This study designed a deterministic lateral displacement (DLD) chip with dual input and dual outlet of equal width for the separation of Haematococcus pluvialis and Chlorella vulgaris. Optimal separation parameters were determined through a series of experiments, resulting in a purity of 99.80 % for Chlorella vulgaris and 94.58 % for Haematococcus pluvialis, with recovery rates maintained above 90 %, demonstrating high efficiency. This study provides a reliable foundation for future research and applications of microalgae, which holds considerable significance for the subsequent analysis and utilization of microalgae.

Is the invasive Caprella scaura Templeton, 1836 displacing its resident congener Caprella equilibra Say, 1818 in marinas of the South Iberian Peninsula? A long-term spatio-temporal approach.

Although marine invasions are increasingly a matter of concern, the impact of invasive species in the ecosystem and their ability to replace native taxa is still little understood. Data from 2011 to 2021 in marinas of the Southern Iberian Peninsula supported that the invasive amphipod Caprella scaura is replacing the resident Caprella equilibra over time. Six marinas where C. equilibra was abundant in 2011 and C. scaura was absent, are now dominated by C. scaura. Although this displacement is more evident in Mediterranean shores than in Atlantic coasts, it is very variable between marinas. The spreading of the invasive species in marinas of the Alboran Sea mainly occurred from 2011 to 2017, preventing C. equilibra from regaining its former distribution. The ultimate factors responsible for the displacement, such as the aggressive behaviour of C. scaura, environmental influences or physiological performance in a global warming context, should be further investigated experimentally.

Study on the differences between Hoek-Brown parameters and equivalent Mohr-Coulomb parameters in the calculation slope critical acceleration and permanent displacement.

Mohr-Coulomb (MC) strength criterion has been widely used in many classical analytical expressions and numerical modeling due to its simple physical calculation, but the MC criterion is not suitable for describing the failure envelope of rock masses. In order to directly apply MC parameters to analytical expressions or numerical modeling in rock slope stability analysis, scholars established a criterion for converting Hoek-Brown (HB) parameters to equivalent MC parameters. However, the consistency of HB parameters and equivalent MC parameters in calculating critical acceleration of slope needs to be further explored and confirmed. Therefore, HB parameters are converted into equivalent MC parameters by considering the influence of slope angle (1# case and 2# case when slope angle is not considered and slope angle is considered respectively). Then, the lower-bound of finite element limit analysis is used for numerical modeling, and the results of calculating critical acceleration using HB parameters and equivalent MC parameters are compared, and the influence of related parameters on the calculation of critical acceleration is studied. Finally, the influence of different critical accelerations on the calculation of slope permanent displacement is further analyzed through numerical cases and engineering examples. The results show that: (1) In the 1# case, the critical acceleration obtained by the equivalent MC parameters are significantly larger than that obtained by the 2 #case and the HB parameters, and this difference becomes more obvious with the increase of slope angle. The critical acceleration obtained by the 2# case is very close to the HB parameters; (2) In the 1# case, slope height is inversely proportional to ΔAc (HB(Ac) - 1#(Ac)), and with the increase of slope height, ΔAc decreases, while in the 2# case, the difference of ΔAc (HB(Ac) - 2#(Ac)) is not significant; (3) In the 1# case, the sensitivity of the HB parameters to ΔAc is D > GSI > mi > σci, but in the 2# case, there is no sensitivity-related regularity; (4) The application of HB parameters and equivalent MC parameters in slope permanent displacement is studied through numerical cases and engineering examples, and the limitations of equivalent MC parameters in rock slope stability evaluation are revealed.

Indicator displacement-based colorimetric assay for dibutyl phthalate in pharmaceutical products with titanium(IV)-pyridylazo resorcinol (PAR).

Taking advantage of the competitive binding affinity towards Ti(IV) between 4-(2-pyridylazo) resorcinol (PAR) and phthalate, a simple indicator displacement (ID)-based colorimetric assay was designed for indirect determination of a well-known phthalic acid ester, dibutyl phthalate (DBP). The indicator PAR and Ti(IV) formed a purplish-red-colored Ti(IV)-PAR complex (λmax = 540 nm) at a 1:1 ratio. In the presence of pre-hydrolyzed DBP, colorless complex formation of phthalate ion (emerging from alkaline hydrolysis of DBP) with Ti(IV) resulted in a hypsochromic shift in absorbance maximum, accompanying a color change from purplish-red to yellowish-orange (λmax = 390 nm) by the release of PAR from Ti(IV)-PAR system. Based on this mechanism, the linear response range of the system for DBP was found to lie between 0.16 and 0.37 mmol L-1 with an experimental detection limit of 11.6 µmol L-1. The recommended Ti(IV)-PAR system was successfully applied to DBP-containing pharmaceutical products (as real sample) after a simple clean-up process for removing possible water-soluble interferents. The analytical results obtained from the recommended method (by applying the standard addition approach) and the reference liquid chromatography-tandem mass spectrometric (LC-MS/MS) method were statistically compared using DBP-extract of the drug samples. Consequently, a simple and selective colorimetric ID strategy was proposed for the analysis of DBP in pharmaceuticals for the first time.

Analyzing urinary hippuric acid as a metabolic health biomarker through a supramolecular architecture.

The prevalence of metabolic disorders has been found to increase concomitantly with alternations in habitual diet and lifestyle, indicating the importance of metabolic health monitoring for early warning of high-risk status and suggesting effective intervention strategies. Hippuric acid (HA), as one of the most abundant metabolites from the gut microbiota, holds potential as a regulator of metabolic health. Accordingly, it is imperative to establish an efficient, sensitive, and affordable method for large-scale population monitoring, revealing the association between HA level and metabolic disorders. Upon systematic screening of macrocycle•dye reporter pair, a supramolecular architecture (guanidinomethyl-modified calix[5]arene, GMC5A) was employed to sense urinary HA by employing fluorescein (Fl), whose complexation behavior was demonstrated by theoretical calculations, accomplishing quantification of HA in urine from 249 volunteers in the range of 0.10 mM and 10.93 mM. Excitedly, by restricted cubic spline, urinary HA concentration was found to have a significantly negative correlation with the risk of metabolic disorders when it exceeded 0.76 mM, suggesting the importance of dietary habits, especially the consumption of fruits, coffee, and tea, which was unveiled from a simple questionnaire survey. In this study, we accomplished a high throughput and sensitive detection of urinary HA based on supramolecular sensing with the GMC5A•Fl reporter pair, which sheds light on the rapid quantification of urinary HA as an indicator of metabolic health status and early intervention by balancing the daily diet.

Unlocking the tapestry of conservation: Navigating ecological resettlement policies in Nepal.

Conservation initiatives involve a complex interplay of various ecological, socio-political, and economic factors. Ecological resettlement (ER), implemented within the context of nature conservation policies, stands as one of the most contested issues worldwide. This study aims to navigate the domain of ER policy in conservation through discursive institutionalism and a policy arrangement approach. Focusing on Nepal's conservation policy pathways over the last seven decades, we critically analyze policy ideas and narratives, trends, patterns of policy development, institutional arrangements, driving factors, and responses to contemporary ER policies. Methods involved a systematic literature review (n = 271), a comprehensive review of policy documents and project reports (n > 150), and expert interviews (n = 20). Over the past 50 years, >7600 households in Nepal have been displaced in the name of ER and are still persisting despite the rhetoric of participatory conservation. With changes in political regimes, conservation policy has shifted from a hunting-focused approach to landscape-level and transboundary conservation. Initially influenced by internal factors such as economic and political governance, conservation policies were later shaped by international conservation discourse. Also, the operational sphere of such policy ideas and narratives - including actors, resources, discourses, and rules - along with trends, priorities, institutional arrangements, and driving factors of ER policies, has changed over time. Further, the exclusion of deprived communities and the capture of conservation benefits by elites have undermined conservation values. This research stresses the importance of a judicious balance between people's welfare and nature's integrity, emphasizing community-based natural resource management models accredited to a conservation standard. We further urge the revision of displacement-oriented conservation policies to secure the rights of Indigenous people and traditional landholders, thereby ensuring conservation and sustainable development at both national and global levels.

Experimental Study of Needle Insertion into Gerbil Tympanic Membrane.

The perforation characteristics and fracture-related mechanical properties of the tympanic membrane (TM) greatly affect surgical procedures like myringotomy and tympanostomy performed on the middle ear. We analyzed the most important features of the gerbil TM perforation using an experimental approach that was based on force measurement during a 2-cycle needle insertion/extraction process. Fracture energy, friction energy, strain energy, and hysteresis loss were taken into consideration for the analysis of the different stages of needle insertion and extraction. The results demonstrated that (1) although the TM shows viscoelastic behavior, the contribution of hysteresis loss was negligible compared to other irreversible dissipated energy components (i.e., fracture energy and friction energy). (2) The TM puncture force did not substantially change during the first hours after animal death, but interestingly, it increased after 1 week due to the drying effects of soft tissue. (3) The needle geometry affected the crack length and the most important features of the force-displacement plot for the needle insertion process (puncture force, puncture displacement, and jump-in force) increased with increasing needle diameter, whereas the insertion velocity only changed the puncture and jump-in forces (both increased with increasing insertion velocity) and did not have a noticeable effect on the puncture displacement. (4) The fracture toughness of the gerbil TM was almost independent of the needle geometry and was found to be around 0.33 ± 0.10 kJ/m2.

Modeling kinematic variability reveals displacement and velocity based dual control of saccadic eye movements.

Noise is a ubiquitous component of motor systems that leads to behavioral variability of all types of movements. Nonetheless, systems-based models investigating human movements are generally deterministic and explain only the central tendencies like mean trajectories. In this paper, a novel approach to modeling kinematic variability of movements is presented and tested on the oculomotor system. This approach reconciles the two prominent philosophies of saccade control: displacement-based control versus velocity-based control. This was achieved by quantifying the variability in saccadic eye movements and developing a stochastic model of its control. The proposed stochastic dual model generated significantly better fits of inter-trial variances of the saccade trajectories compared to existing models. These results suggest that the saccadic system can flexibly use the information of both desired displacement and velocity for its control. This study presents a potential framework for investigating computational principles of motor control in the presence of noise utilizing stochastic modeling of kinematic variability.

Disposable e-cigarette use: Factors, frequency and cigarette smoking among United States high school students.

BACKGROUND AND AIMS: Disposable e-cigarette use has increased among United States (US) high school students in recent years. However, there is limited research on the profile of these users, how often they use these products, and whether they displace cigarette smoking. This study aimed to measure how disposable e-cigarette use among US youth varies according to demographic characteristics and whether there is any association between e-cigarette use and reduced use of traditional cigarettes. DESIGN: We used cross-sectional data from the 2022 National Youth Tobacco Survey and conducted a multinomial logistic regression to examine factors associated with the types of e-cigarette devices used in the prior 30 days, adjusting for sex, sexual identity, grade level and race/ethnicity. We also used a finite mixture model to account for unobserved differences among users and identify e-cigarette use patterns in different subgroups of users. SETTING: United States. PARTICIPANTS: High school students in grades 9-12 (n = 14 389). MEASUREMENTS: Survey participants self-reported the type of e-cigarette device used, the frequency of e-cigarettes used and cigarettes smoked over the past 30 days. FINDINGS: Disposable e-cigarettes were the most popular e-cigarette type. Sex, sexual orientation, grade level and race/ethnicity were associated with disposable e-cigarette use. The odds of disposable e-cigarette use were lower in male students than in female students (odds ratio [OR] = 0.78, 95% confidence interval [CI] = [0.64-0.96]), and higher in students who identified as gay or lesbian (OR = 1.70, 95% CI = [1.11-2.61]) or bisexual (OR = 1.52, 95% CI = [1.16-1.99]) than in heterosexual students. The odds of disposable use were higher among students in higher grades (10th, 11th and 12th) than in 9th graders (OR = 1.71, 2.24 and 2.52, respectively). Disposable e-cigarette users had a lower frequency of traditional cigarette use than other e-cigarette users, both in the low-frequency class (incidence rate ratio [IRR] = 0.33, 95% CI = [0.12-0.92]) and the high-frequency class (IRR = 0.27, 95% CI = [0.08-0.92]). CONCLUSIONS: Disposable e-cigarette use appears to be higher among United States high school students who are female, older and/or identify as gay, lesbian or bisexual. Disposable e-cigarettes appear to be associated with reduced traditional cigarette use.

Study on displacement units for water flooded low-permeability oil reservoirs.

Understanding the reservoir feature changes is essential for optimizing oil exploitation throughout the development lifecycle. This paper proposed an analytical displacement unit method to character the features of water-flooded, low-permeability oil reservoirs. The method hinges the ratio of fluid flux to area and average water saturation, providing a fine description of reservoir dynamics. It has been implemented in a case study of a five-spot waterflooding scheme. The reservoir can be categorized into sixteen distinct unit types, each with specific attributes. This paper delves into the evolution of these displacement units and the key factors that influence their behavior. The findings provide insights into the degree of waterflooding and oil distribution following continuous waterflooding. Furthermore, the proposed method offers a valuable framework for analyzing the development of dominant water flow channels and exploiting the residual oil.

Optical coherence tomography homography for detection of retinal displacement: a validation study.

PURPOSE: Retinal displacement following rhegmatogenous retinal detachment (RRD) has been associated with inferior functional outcomes. Recent evidence using an overlay technique suggests that fundus-autofluorescence underestimates post-RRD repair retinal displacement. This study aims to validate the overlay technique in normal eyes and to determine its sensitivity and specificity at detecting retinal displacement. METHODS: We conducted a retrospective case series involving 66 normal eyes, each with at least two separate infrared (IR) images at different time points. Overlay of the two images was based on manual marking of choroidal and optic nerve head (ONH) landmarks. For each set of two IR images, computer code for homography generated two outputs, flipping view video and an overlay picture. First, validation of choroidal/ONH alignment was performed using the flipping view video to ensure accurate manual markings. Then, two different masked graders (AB + IM) evaluated the overlays for presence of retinal displacement. 16 control eyes following RRD repair with detected retinal displacement on FAF imaging assessed sensitivity and specificity of the technique. RESULTS: 94% of overlays were found to be well aligned (62/66). 11 cases exhibited errors on flipping view analysis (choroidal/ONH misalignment). Those 11 cases had a significantly higher rate of retinal displacement (false positives) compared to cases without errors (8/11,72% Vs 54/55,98%,P = 0.001). Sensitivity and specificity of the overlay technique for detecting retinal displacement considering only adequate flipping view cases (n = 55) were calculated as 100% and 98%, respectively. CONCLUSIONS: IR overlay emerges as a reliable and valid method for detecting retinal displacement, exhibiting excellent sensitivity and specificity.

Determining the changes in morphology and loading status following medial displacement calcaneal osteotomy for flatfoot using patient-specific finite element models.

Medial displacement calcaneal osteotomy (MDCO) is the standard procedure for flatfoot. We investigated the effect of MDCO on the foot using a finite element analysis. Foot models were created from computed tomography data of 8 patients with flat feet. MDCO was performed on each model with bone translation distance of 4, 8, and 12 mm. The morphological changes, plantar pressures, and stress percentage on the talocrural and subtalar joints were evaluated before and after surgery. Morphological evaluation showed improvement in the medial longitudinal arch. The stress percentage of plantar pressure in the medial area decreased, and the stress percentage of plantar pressure in the mid- and lateral forefoot area increased. At the talocrural joint, the medial and middle stress percentage increased, while the lateral and posterior stress percentage decreased. In the subtalar joint, the stress percentage in the middle subtalar joint increased and that in the posterior subtalar joint decreased. Within the posterior subtalar joint, the anterior and medial stress percentage increased, while the posterior and lateral stress percentage decreased. Preoperative simulation using the finite element analysis may be useful in understanding postoperative morphological changes and loading conditions to perform patient-specific surgery.

Locating Nesting Sites for Critically Endangered Galápagos Pink Land Iguanas (Conolophus marthae).

Invasive alien species control is recognized worldwide as a priority action to preserve global biodiversity. However, a lack of general life history knowledge for threatened species can impede the effectiveness of conservation actions. Galápagos pink land iguanas (Conolophus marthae) are endemic to Wolf Volcano, Galápagos, Ecuador. These iguanas are threatened by invasive alien species, particularly feral cats, that may affect their small population size. To guarantee the long-term survival of C. marthae, the Galápagos National Park Directorate is considering, along with an ongoing campaign of feral cat control, the implementation of a head-start program. However, the success of this management strategy necessarily relies on the identification of pink iguana nesting grounds, which were still unknown at the onset of this study. We modeled the movement patterns of male and female iguanas during the reproductive season, using location data collected from custom-made remote tracking devices installed on adult pink iguanas in April 2021. We first calculated for each individual the vector of distances from its starting location, which was defined as net displacement. We then used net displacement as the response variable in a generalized additive mixed model with day of the year as the predictor. Based on the hypothesis that males and females may behaviorally differ after mating, we looked for female-specific migratory behavior suggesting females were moving toward nesting areas. The results obtained confirmed our hypothesis, as females exhibited a distinct migratory behavior, reaching a small plateau area inside of Wolf Volcano's caldera and ca. 400 m below the volcano's northern rim. Moreover, once inside the caldera, females displayed a more aggregated distribution pattern. The movement data obtained allowed Galápagos National Park rangers to locate individual pink iguana nests and subsequently to sight and collect the first observed hatchlings of the species. This work constitutes a necessary baseline to perform dedicated studies of pink iguana nests and emerging hatchling iguanas, which is an essential step toward the development of an effective head-start program.

A method to accelerate computational efficiency by more than two orders of magnitude for Monte Carlo simulations of electron-solid interactions.

A method has been developed to increase computational efficiency in Monte Carlo simulations of electron transport and interactions in matter. The method serves as the computational engine for the open-source code AMCSET (Aggie Monte Carlo Simulations of Electron and Ion Transport). The key is to combine n consecutive neighboring free flying distances into groups. Within each group, both flying distance and Mott scattering angles are obtained using Monte Carlo sampling under an equal energy approximation. This reduces the number of integrations of the tabulated differential Mott scattering cross-section in scattering angle selection, i.e., from 1000 to 1 if n = 1000. The method increases efficiency by more than 100 times. At the same time, the calculation still guarantees accuracy in calculating electron trajectory, excitation/ionization energy deposition, elastic scattering energy deposition, and displacement creation. For demonstration, 10 MeV electron bombardments of pure Fe with n up to 1000 are used as examples. The method, due to the availability of tabulated scattering cross-sections, is applicable for targets of the entire elemental table up to Z = 118, and for electron energies up to 900 MeV.

The Stiffness of the Ascending Aorta Has a Direct Impact on Left Ventricular Function: An In Silico Model.

During systole, longitudinal shortening of the left ventricle (LV) displaces the aortic root toward the apex of the heart and stretches the ascending aorta (AA). An in silico study (Living Left Heart Human Model, Dassault Systèmes Simulia Corporation) demonstrated that stiffening of the AA affects myocardial stress and LV strain patterns. With AA stiffening, myofiber stress increased overall in the LV, with particularly high-stress areas at the septum. The most pronounced reduction in strain was noted along the septal longitudinal region. The pressure-volume loops showed that AA stiffening caused a deterioration in LV function, with increased end-systolic volume, reduced systolic LV pressure, decreased stroke volume and effective stroke work, but elevated end-diastolic pressure. An increase in myofiber contractility indicated that stroke volume and effective stroke work could be recovered, with an increase in LV end-systolic pressure and a decrease in end-diastolic pressure. Longitudinal and radial strains remained reduced, but circumferential strains increased over baseline, compensating for lost longitudinal LV function. Myofiber stress increased overall, with the most dramatic increase in the septal region and the LV apex. We demonstrate a direct mechanical pathophysiologic link between stiff AA and reduced longitudinal left ventricular strain which are common in patients with HFpEF.

Nodding syndrome: A role for environmental biotoxins that dysregulate MECP2 expression?

Nodding syndrome is an epileptic encephalopathy associated with neuroinflammation and tauopathy. This initially pediatric brain disease, which has some clinical overlap with Methyl-CpG-binding protein 2 (MECP2) Duplication Syndrome, has impacted certain impoverished East African communities coincident with local civil conflict and internal displacement, conditions that forced dependence on contaminated food and water. A potential role in Nodding syndrome for certain biotoxins (freshwater cyanotoxins plus/minus mycotoxins) with neuroinflammatory, excitotoxic, tauopathic, and MECP2-dysregulating properties, is considered here for the first time.

Association of schizophrenia with fracture-related femoral neck displacement: A cross-sectional retrospective study.

Aim: Fracture-related femoral neck displacement is more likely in patients with schizophrenia because of delayed diagnosis, as these patients frequently have less severe fracture-associated subjective symptoms. This study aimed to investigate the association of schizophrenia with the risk of fracture-related femoral neck displacement in hospitalized patients. Methods: We retrospectively analyzed the medical records of patients with femoral neck fractures treated between April 2013 and March 2018 at a single institution. Multivariate logistic regression was used to explore the relationship between schizophrenia and fracture-related femoral neck displacement after adjusting for risk factors. Results: We compared 30 and 194 patients with and without schizophrenia, respectively. The prevalence of fracture-related displacement was 80.0% in patients with schizophrenia and 62.4% in the controls (p = 0.06). After adjusting for confounding variables, schizophrenia significantly correlated with fracture-related femoral neck displacement (odds ratio: 4.74, 95% confidence interval: 1.09-20.60, p = 0.0378). Conclusions: Schizophrenia is associated with a higher risk of severe femoral neck fracture. To improve outcomes and alleviate the societal burden of femoral neck fractures, early radiographic assessment and surgical intervention for femoral fractures are essential for patients with schizophrenia, even in those without pain symptoms.