Optimization of Brilliant Blue R photocatalytic degradation by silver nanoparticles synthesized using Chlorella vulgaris.

Synthesis of silver nanoparticles (Ag NPs) using microalgae is gaining recognition for its environmentally friendly and cost-effective nature while maintaining high activity of NPs. In the present study, Ag NPs were synthesized using a methanolic extract of Chlorella vulgaris and subjected to calcination. The X-ray diffraction (XRD) analysis showed a crystalline nature of the products with Ag2O and Ag phases with an average crystalline size of 16.07 nm before calcination and an Ag phase with 24.61 nm crystalline size after calcination. Fourier transform infrared spectroscopy (FTIR) revealed the capping functional groups on Ag NPs, while scanning electron microscopy (SEM) displayed their irregular morphology and agglomeration after calcination. The organic coating was examined by energy-dispersive X-ray spectroscopy (EDX) and thermogravimetric (TGA) analyses, confirming the involvement of the metabolites. The UV-Vis analysis showed a difference in optical properties due to calcination. Synthesized Ag NPs were applied for the photodegradation of hazardous dye Brilliant Blue R in visible light. Different values of light intensity, catalyst dose, initial dye concentration, and pH were tested to identify the optimal set of operating conditions. The highest degradation efficiency of 90.6% with an apparent rate constant of 0.04402 min-1 was achieved after 90 min of irradiation in the highest tested catalyst dosage.

Hydrothermally Grown Globosa-like TiO2 Nanostructures for Effective Photocatalytic Dye Degradation and LPG Sensing.

The rapid expansion of industrial activities has resulted in severe environmental pollution manifested by organic dyes discharged from the food, textile, and leather industries, as well as hazardous gas emissions from various industrial processes. Titanium dioxide (TiO2)-nanostructured materials have emerged as promising candidates for effective photocatalytic dye degradation and gas sensing applications owing to their unique physicochemical properties. This study investigates the development of a photocatalyst and a liquefied petroleum gas (LPG) sensor using hydrothermally synthesized globosa-like TiO2 nanostructures (GTNs). The synthesized GTNs are then evaluated to photocatalytically degrade methylene blue dye, resulting in an outstanding photocatalytic activity of 91% degradation within 160 min under UV light irradiation. Furthermore, these nanostructures are utilized to sense liquefied petroleum gas, which attains a superior sensitivity of 7.3% with high response and recovery times and good reproducibility. This facile and cost-effective hydrothermal method of fabricating TiO2 nanostructures opens a new avenue in photocatalytic dye degradation and gas sensing applications.

Facile synthesis of Bi2ZnB2O7-MoS2 Nanocomposites for Photodetector and Photocatalytic Rhodamine B dye degradation Application.

In this research, the visible light active performance of Bi2ZnB2O7 (BBZO) was significantly enhanced through the formation of a composite with few layer MoS2. The resultant MoS2@BBZO catalyst was employed in both photocatalysis and photodetector applications. Comprehensive structural and morphological analyses of the MoS2@BBZO catalyst were conducted using X-ray diffraction (XRD), Raman spectroscopy, field-emission scanning electron microscopy (FE-SEM), and transmission electron microscopy (TEM). The estimated band gaps of BBZO and the composite were found to be 2.8 eV and 1.74 eV, respectively. Rhodamine B degradation studies demonstrated that the catalyst achieved 75% degradation within 30 minutes. Additionally, the photodetector application was investigated, revealing rapid photo-switching capabilities and an increased photocurrent.

Silver decorated zeolite embedded in bionanocomposite hydrogels based on cross-linked carboxymethyl cellulose for excellent catalytic hydrogenation of azo dyes.

Herein, bionanocomposite beads based on Carboxymethyl cellulose/Dextrant sulfate (CMC/DS) embedding silver nanoparticle-functionalized zeolite (AgZ) were developed and proposed as catalysts for catalytic hydrogenation of Direct Red 16 (DR16) azo dye under different experimental parameters. The obtained results showed that AgZ incorporation into the polymer matrix produced highly porous structures with improved thermal stability. For antibacterial application, it was shown that the engineered bionanocomposites were effective against all tested bacteria. The CMC-DS-AgZ catalysts showed good catalytic performances for the hydrogenation of DR16 in various real-life water samples and even in presence of several mineral salts, however with a high efficiency (99 %) obtained for the catalyst prepared at elevated AgZ content (with a kapp rate constant of 0.239 min-1). Moreover, the hydrogenation study of various azo dyes highlighted the satisfactory application potential of the catalysts and their versatility. The catalyst beads showed good recyclability for five successive cycles without any significant loss of efficiency or stability. The proposed mechanism for DR16 catalytic hydrogenation on C3-D1-AgZ revealed that AgZ could enhance the catalytic activity of the beads by facilitating the formation of AgH intermediates. Finally, the green synthesized materials were shown to be viable and potential candidates for the purification of environmental media.

Iron oxide nanoparticles derived from Polyalthia korintii (Dunal) Benth. & Hook. F leaves extract exhibits biological and dye degradation potentials.

Green synthesis of iron oxide nanoparticles using plant extracts is of tremendous interest owing to its cost effectiveness, ecofriendly and high efficiency compared to physical and chemical approaches. In the current study, we describe a green approach for producing iron oxide nanoparticles utilizing Polyalthia korintii aqueous leaf extract (PINPs). The prepared PINPs were assessed of their biological and dye degradation potentials. The physico-chemical characterization of PINPs using UV-Visible spectrophotometer, Fourier Transform Infrared Spectroscopy, X-Ray Diffraction studies, Field emission Scanning Electron Microscopy and Energy Dispersive X-ray spectroscopy analysis confirmed the synthesized sample comprised of iron oxide entity, predominantly spherical with the size range of 40-60 nm. Total Phenolic Content of PINPs is 59.36 ± 1.64 µg GAE/mg. The PINPs exhibited 89.78 ± 0.07% DPPH free radical scavenging and 28.7 ± 0.21% ABTS cation scavenging activities. The antibacterial activities were tested against different gram-positive and gram-negative bacteria and PINPs were more effective against Enterococcus faecalis and Klebsiella pneumoniae. Cytotoxicity of PINPs against K562 and HCT116 were measured and IC50 values were found to be 84.99 ± 4.3 µg/ml and 79.70 ± 6.2 µg/ml for 48 h respectively. The selective toxicity of PINPs was demonstrated by their lowest activity on lymphocytes, HEK293 cells, and erythrocytes. The toxicity (LC 50 values) against first, second, third and fourth instar larvae of Culex quinquefasciatus was 40 ± 1.5 mg/mL, 45 ± 0.8 mg/mL, 99 ± 2.1 mg/mL and 120 ± 3.5 mg/mL respectively. Finally, PINPs were utilized to as a catalyst for removal of textile dyes like Methylene blue and methyl orange in a fenton-like reaction. The results showed 100% dye degradation efficiency in a fenton like reaction within 35 min. Thus, the green synthesized PINPs exhibit antioxidant, antibacterial, antiproliferative, larvicidal and dye degradation potentials, indicating their suitability for biological and environmental applications.

Facile coupling of plasmonic Au-NPs on ZnS NFs as a robust SERS substrate for toluidine blue detection and degradation.

BACKGROUND: The robustness and sensitivity of the surface-enhanced Raman spectroscopy (SERS) technique heavily relies on the development of SERS active materials. A hybrid of semiconductor and plasmonic metals is highly effective as a SERS substrate, which enables the trace level detection of various organic pollutants. RESULTS: This approach demonstrates the photodeposition of plasmonic gold nanoparticles (Au-NPs) on the surface of semiconductor-zinc sulfide nanoflowers (ZnS NFs), grown via the hydrothermal route. The synergistic contribution of the charge-transfer phenomenon and localized surface plasmon resonance of the Au-NPs/ZnS NFs makes it an ideal SERS substrate for the detection of organic pollutants, toluidine blue (TB). The proposed material has a high SERS enhancement factor (109), low limit of detection (10-11 M), good reproducibility, selectivity and strong anti-interference ability. Furthermore, the practicability of the Au-NPs/ZnS NFs is explored in real-time water samples, which are obtained with the satisfactory recovery rates. Additionally, the UVC light illumination on the Au-NPs/ZnS NFs has efficiently degraded TB within a time period of 150 min. SIGNIFICANCE AND NOVELTY: These finding demonstrate the significance of the proposed Au-NPs/ZnS NFs for SERS based detection and degradation of organic pollutants in real-time samples, highlighting their potential in monitoring and treating water pollutants in wastewater.

Investigations of adsorption and photoluminescence properties of encapsulated Al-ZnO nanostructures: Synthesis, morphology and dye degradation studies.

This study focuses on the solution combustion approach to examine the nanostructures of undoped and doped ZnO with different concentrations of Al (0.1 % and 0.2 %). Various physical techniques were utilized to characterize the synthesized nanoparticles. X-ray diffraction (XRD) revealed the crystalline materials, while scanning electron microscopy (SEM) with energy-dispersive X-ray (EDX) findings confirmed the products with particle size and the insertion of Al into the ZnO lattice. Fourier-transform infrared spectra (FTIR) confirmed the presence of different functional groups in the obtained material. The results indicate that Al-doped ZnO (Al-ZnO) nanoparticles show promising properties for optoelectronics and photoluminescence. Photoluminescence analysis indicated that an increase in Al3+ (0.2 %) concentration resulted in a decrease in peak intensity and an increase in the full width at half maximum. The band gap was calculated using the Taucs plot. The study also highlights the effectiveness of Zn1-xAlxO nanostructures in degrading organic pollutants, particularly in adsorbing Malachite Green (MG) dye. Among the samples, the 0.2 % Al-doped ZnO exhibited superior dye degradation efficiency due to its enhanced adsorption capacity and smaller particle size, as evidenced by multilayer adsorption capacity and chemisorption during the degradation process. This study provides valuable insights into the potential applications of Al-doped ZnO nanoparticles in various environmental and technological fields, emphasizing their significance in the degradation of organic pollutants.

Fungus mediated synthesis of biogenic palladium catalyst for degradation of azo dye.

Dyes are the coloured substances that are applied on different substrates such as textiles, leather and paper products, etc. Azo dyes release from the industries are toxic and recalcitrant wastewater pollutants, therefore it is necessary to degrade these pollutants from water. In this study, the palladium (0) nanoparticles (PdNPs) were generated through the biological process and exhibited for the catalytic degradation of azo dye. The palladium nanoparticles (PdNPs) were synthesized by using the cell-free approach i.e. extract of fungal strain Rhizopus sp. (SG-01), which significantly degrade the azo dye (methyl orange). The amount of catalyst was optimized by varying the concentration of PdNPs (1 mg/mL to 4 mg/mL) for 10 mL of 50 ppm methyl orange (MO) dye separately. The time dependent study demonstrates the biogenic PdNPs could effectively degrade the methyl orange dye up to 98.7% with minimum concentration (3 mg/mL) of PdNPs within 24 h of reaction. The long-term stability and effective catalytic potential up to five repeated cycles of biogenic PdNPs have good significance for acceleration the degradation of azo dyes. Thus, the use of biogenic palladium nanoparticles for dye degradation as outlined in the present study can provide an alternative and economical method for the synthesis of PdNPs as well as degradation of azo dyes present in wastewater and is helpful to efficiently remediate textile effluent.

Luminescent TiO2 nanoparticles synthesized from Mollugo Oppositifolia and Trianthema Portulacastrum for dye degradation, antimicrobial and antioxidant properties.

In modern times, nanoparticles have materialized as indispensable things in contemporary medicine, with a variety of uses in clinical, drug and gene conveyance. In the present study, TiO2 nanoparticles (NPs) prepared from the leaf extracts of Mollugooppositifolia and Trianthema portulacastrum were compared with the chemical TiO2-NPs for antibacterial and antioxidant activities and environment-friendly nature through various tools like the UV-visible, X-ray diffraction with the aid of other analytical techniques like HR-TEM, Fourier transform infrared (FT-IR) and photoluminescence spectroscopic techniques. The morphology of green TiO2-NPs is found to be spherical, which is supported by HR-TEM images. FT-IR analyses and X-ray diffraction data ensure that the polycrystalline characters of TiO2-NPs alike to the presence of metal oxide. TiO2-NPs showed a possible photocatalytic activity for the ruin of acid black 1 dye after disclosure to sunlight. The chemical and green methods of TiO2-NPs have acid black 1 dye decomposition rates of 86.66% and 94.33%, respectively. The synthesized TiO2-NPs are also assessed for antimicrobial and antioxidant activities. Green TiO2-NPs exhibit antibacterial activity against Pseudomonas aeruginosa (17 + 0.56 mm) and Staphylococcus aureus (16 + 0.24 mm) at concentrations as low as 100 µL. The green TiO2-NPs showed high inhibition of DPPH I radical (50 µg/m) at 95.17 ± 21. Therefore, TiO2-NPs represent eco-friendly properties that aid in the degradation of dyes due to their antioxidant activity.

Biogenic synthesis of selenium nanoparticles from Nyctanthes arbor-tristis L. and evaluation of their antimicrobial, antioxidant and photocatalytic efficacy.

Biogenic synthesis of nanoparticles has been established as an environmentally benign and sustainable approach. This study emphasizes biosynthesis of selenium nanoparticles (SeNPs) utilizing leaf extract of Nyctanthes arbor-tritis L., well known for its abundant bioactive compounds. Various analytical techniques were employed for characterization of synthesized SeNPs. X-ray diffraction (XRD) spectroscopy confirmed the crystalline structure and revealed the average crystalline size of SeNPs to be 44.57 nm. Additionally, UV-Vis spectroscopy confirmed successful synthesis of SeNPs by validating the surface plasmon resonance (SPR) properties of SeNPs. FTIR analysis data revealed different bonds and their corresponding functional groups responsible for the synthesis and stability of synthesized SeNPs. DLS and zeta analysis revealed that 116.5 nm sized SeNPs were stable in nature. Furthermore, field emission scanning electron microscopy (FE-SEM) validated the spherical morphology of SeNPs with a size range of 60-80 nm. Inductively coupled plasma-optical emission spectroscopy (ICP-OES) determined the concentration of SeNPs in the obtained colloidal solution. Antioxidant activity of synthesized SeNPs was evaluated employing DPPH and H2O2 assay, revealed that the synthesized SeNPs were effective antioxidant agent. Additionally, antimicrobial potential was evaluated against a panel of Gram-positive and Gram-negative bacteria and found to be effective at higher concentration of SeNPs. SeNPs also exhibited strong anti-biofilm activity while evaluated against various biofilm producing bacteria like Escherichia coli , Staphylococcus epidermidis and Klebsiella pneumonia. The cytotoxicity of the bio-synthesized SeNPs was evaluated against HEK 293 cell line, exhibited minimal toxicity even at concentration 100 µg/mL with 65% viable cells. SeNPs has also been evaluated for dye degradation which has indicated excellent photocatalytic activity of synthesized SeNPs. The experimental data obtained altogether demonstrated that synthesized SeNPs exhibited significant antimicrobial and anti-biofilm activity against various pathogens, and also showed significant antioxidant and photocatalytic efficiency.

Boosting Reactive Oxygen Species Generation via Contact-Electro-Catalysis with FeIII-Initiated Self-cycled Fenton System.

Contact Electro-Catalysis (CEC) using commercial dielectric materials in contact-separation cycles with water triggers interfacial electron transfer, generating reactive oxygen species (ROS). However, the hydrophobicity of these materials limits reaction sites, and the generated ROS often combine to form hydrogen peroxide (H2O2), which does not decompose further, leading to suboptimal rates. Addressing H2O2 generation and activation is crucial for advancing CEC. Here, we synthesized a catalyst by loading polytetrafluoroethylene (PTFE) onto ZSM-5 (PZ), achieving uniform dispersion in water. Introducing an FeIII-initiated self-cycling Fenton system (SF-CEC), with synergistic O2 activation and FeIII-activated H2O2, enhanced ROS generation. This system enabled nearly 99% degradation of azo dyes within 10 minutes, a sixfold improvement over traditional CEC. It represents the fastest ultrasound-induced degradation rate of methyl orange dye to date. Without extra oxidants, it also achieved stable dissolution of precious metals in weakly acidic solutions at room temperature, with 80% gold dissolution within 2 hours-2.5 times faster than similar systems. This study corrects the perception of CEC under acidic conditions, offering new insights for dye degradation and precious metal recovery.

Novel furfural-complexed approach to synthesizing carbon-Doped ZnO with breakthrough photocatalytic efficacy.

INTRODUCTION: The efficiency of zinc oxide (ZnO) nanoparticles for environmental decontamination is limited by their reliance on ultraviolet (UV) light and rapid charge carrier recombination. Carbon doping has been proposed to address these challenges by potentially enhancing visible light absorption and charge separation. OBJECTIVES: This study aims to introduce a novel, single-step synthesis method for carbon-doped ZnO (C-Z) nanoparticles, leveraging the decomposition of zinc nitrate hexahydrate and furfural under a nitrogen atmosphere to improve photocatalytic activity under visible light. METHODS: A series of C-Z variants (C-Z-1 to C-Z-5) and an undoped sample (ZnO-0) were synthesized. The influence of furfural on the synthesis process and doping mechanism was analyzed by X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and UV-visible diffuse reflectance spectroscopy (DRS). RESULTS: XPS confirmed the integration of carbon within the ZnO matrix, and XRD indicated increased lattice dimensions owing to doping. DRS revealed bandgap narrowing, suggesting enhanced charge separation. Among the variants, C-Z-3 significantly outperformed the others, showing a 12-fold increase in the photocatalytic degradation rate of Rhodamine B compared to undoped ZnO. CONCLUSION: The developed single-step synthesis method for C-Z nanoparticles represents a major advancement in materials engineering for ecological applications. The enhanced photocatalytic activity under visible light, as demonstrated by C-Z-3, underscores the potential of these nanoparticles for environmental decontamination.

Hybridization of Polymer-Encapsulated MoS2-ZnO Nanostructures as Organic-Inorganic Polymer Films for Sonocatalytic-Induced Dye Degradation.

The development of environmentally friendly technology is vital to effectively address the issues related to environmental deterioration. This work integrates ZnO-decorated MoS2 (MZ) to create a high-performing PVDF-based PVDF/MoS2-ZnO (PMZ) hybrid polymer composite film for sonocatalytic organic pollutant degradation. An efficient synergistic combination of MZ was identified by altering the ratio, and its influence on PVDF was assessed using diverse structural, morphological, and sonocatalytic performances. The PMZ film demonstrated very effective sonocatalytic characteristics by degrading rhodamine B (RhB) dye with a degradation efficiency of 97.23%, whereas PVDF only degraded 17.7%. Combining MoS2 and ZnO reduces electron-hole recombination and increases the sonocatalytic degradation performance. Moreover, an ideal piezoelectric PVDF polymer with MZ enhances polarization to improve redox processes and dye degradation, ultimately increasing the degradation efficiency. The degradation efficiency of RhB was seen to decrease while employing isopropanol (IPA) and p-benzoquinone (BQ) due to the presence of reactive oxygen species. This suggests that the active species •O2- and •OH are primarily responsible for the degradation of RhB utilizing PMZ2 film. The PMZ film exhibited improved reusability without substantially decreasing its catalytic activity. The superior embellishment of ZnO onto MoS2 and effective integration of MZ into the PVDF polymer film results in improved degrading performance.

Novel approach for green synthesis of stable gold nanoparticles with dried turmeric root extract: investigations on sensor and catalytic applications.

In this study, we present the synthesis of gold nanoparticles (AuNPs) using a completely green synthesis method without the use of any additional functionalizing agent, except dried turmeric root extract. The significant synthesis parameters were optimized, and the applicability of AuNPs was investigated in areas such as plasmonic and fluorescent sensing of aluminum (Al3⁺) and chromium (Cr3⁺) ions, reduction of 4-nitrophenol (4-NP), and degradation of methylene blue (MB) and methyl orange (MO) dyes. Characterization studies were performed using UV-Vis spectroscopy, TEM, FTIR, and XRD, revealing that the AuNPs predominantly had a spherical morphology and a very small particle size of 8.5 nm, with stability maintained up to 120 days. The developed AuNP-based plasmonic sensors relied on aggregation-induced decreases in absorption, along with a red shift in the spectra. Fluorescence sensing demonstrated a linear increase in intensity with increasing concentrations of Al3⁺ and Cr3⁺, with detection limits of 0.83 and 1.19 nM, respectively. The catalytic activities of AuNPs were tested in reducing 4-NP and degradations of MB and MO dyes (binary system) in tap water and wastewater, with the reactions following pseudo-first-order kinetics. This study highlights the potential of AuNPs synthesized from turmeric roots for various environmental and sensing applications.

Fabrication of a reusable carbon quantum dots (CQDs) modified nanocomposite with enhanced visible light photocatalytic activity.

In awareness of industrial dye wastewater, carbon quantum dots (CQDs) and cobalt zinc ferrite (CZF) nanocomposites were synthesised for the making of carbon quantum dots coated cobalt zinc ferrite (CZF@CQDs) nanophotocatalyst using oxidative polymerization reaction. The results of TEM, zeta potential value, and FTIR confirm highly dispersed 1-4 nm particles with the - 45.7 mV carboxylic functionalized surface of CQDs. The results of the synthesised CZF@CQDs photocatalyst showed an average particle size of ~ 15 nm according to TEM, SEM, and XRD. The photocatalyst showed a 1.20 eV band gap, which followed the perfect visible light irradiation. TGA and DTA revealed the good thermal stability of the nanophotocatalyst. VSM was carried out, and the saturation magnetisations for CZF and CZF@CQDs were 42.44 and 36.14 emu/g, respectively. A multipoint study determined the BET-specific surface area of the CZF@CQDs photocatalyst to be 149.87 m2/g. Under visible light irradiation, the final CZF@CQDs nanophotocatalyst demonstrated remarkable efficiency (~ 95% within 25 min) in the photocatalytic destruction of Reactive Blue 222 (RB 222) and Reactive Yellow 145 (RY 145) dyes, as well as mechanical stability and recyclability. Even after the recycling of the degradation study, the nanophotocatalyst efficiency (~ 82%, 7th cycles) was predominantly maintained. The effects of several parameters were also investigated, including initial dye concentration, nanophotocatalyst concentration, CQD content, initial pH of the dye solution, and reaction kinetics. Degradation study data follow the first-order reaction rate (R2 > 0.93). Finally, a simple and low-cost synthesis approach, rapid degradation, and outstanding stability of the CQD-coated CZF nanophotocatalyst should make it a potential photocatalyst for dye wastewater treatment.

Composition-Regulated Photocatalytic Activity of ZnIn2S4@CdS Hybrids for Efficient Dye Degradation and H2O2 Evolution.

Heterostructures of visible light-absorbing semiconductors were prepared through the growth of ZnIn2S4 crystallites in the presence of CdS nanostructures. A variety of hybrid compositions was synthesized. Both reference samples and heterostructured materials were characterized in detail, regarding their morphology, crystalline character, chemical speciation, as well as vibrational properties. The abovementioned physicochemical characterization suggested the absence of doping phenomena, such as the integration of either zinc or indium ions into the CdS lattice. At specific compositions, the growth of the amorphous ZnIn2S4 component was observed through both XRD and Raman analysis. The development of heterojunctions was found to be composition-dependent, as indicated by the simultaneous recording of the Raman profiles of both semiconductors. The optical band gaps of the hybrids range at values between the corresponding band gaps of reference semiconductors. The photocatalytic activity was assessed in both organic dye degradation and hydrogen peroxide evolution. It was observed that the hybrids demonstrating efficient photocatalytic activity in dye degradation were rather poor photocatalysts for hydrogen peroxide evolution. Specifically, the hybrids enriched in the CdS component were shown to act efficiently for hydrogen peroxide evolution, whereas ZnIn2S4-enriched hybrids demonstrated high potential to photodegrade an azo-type organic dye. Furthermore, scavenging experiments suggested the involvement of singlet oxygen in the mechanistic path for dye degradation.

Exploring structural and optical properties of iodine-doped TiO2 nanoparticles in Rhodamine-B dye degradation: Experimental and theoretical investigation.

Energy conversion and pollutant degradation are critical for advancing sustainable technologies, yet they often encounter challenges related to charge recombination and efficiency limitations. This study explores iodine-doped TiO2 nanoparticles as a potential solution for enhancing both energy conversion and pollutant degradation. The nanoparticles were synthesized via the sol-gel method with varying iodine precursor concentrations (0.025-0.1 M) and were characterized for their structural, compositional, and optical properties, particularly in relation to their photocatalytic performance in Rhodamine-B dye degradation. X-ray diffraction confirmed a tetragonal anatase crystal structure, with the average crystallite size decreasing from 10.06 nm to 8.82 nm with increase in iodine concentration. Selected area electron diffraction patterns verified the polycrystalline nature of the nanoparticles. Dynamic light scattering analysis showed hydrodynamic radii ranging from 95 to 125 nm. Fourier-transform infrared spectroscopy identified metal-oxygen vibrations at 441 cm⁻1, and electron microscopy confirmed the spherical morphology of the nanoparticles. Elemental analysis detected the presence of Ti, O, and I in the samples. Diffuse reflectance spectroscopy indicated the optical absorption edges for the doped samples in the visible region from which the corresponding band gap values were deduced. Photoluminescence spectroscopy revealed that the sample with 0.1 M iodine exhibit the lowest emission intensity, suggesting reduced charge recombination. Notably, 0.1 M iodine doped TiO2 samples demonstrated the highest photocatalytic efficiency, achieving 82.36% degradation of Rhodamine-B dye within 140 min under visible light. Additionally, ab-initio density functional theory calculations were performed to investigate the structural, optical, and adsorption properties of TiO2, iodine-doped TiO2, Rhodamine-B, and their composites, providing further insight into the enhanced photocatalytic activity observed in the experiments.

One-Step Self-Assembled WO3/rGO Microspheres Photoanode Assembled Efficient Photocatalytic Fuel Cells for Simultaneous Organic Pollutant Degradation and Electricity Generation.

Photocatalytic fuel cells (PFCs) present a promising and environmentally friendly approach to simultaneously treat organic pollutants in wastewater and electricity generation. The development of photoanodes with high light absorption and carrier mobility is essential for enhancing the performance of PFCs but remains challenging. Herein, a one-step self-assembly strategy was adopted to develop flower-like WO3/rGO microspheres for PFC devices. Attributed to the abundant surface-active sites, enhanced light harvesting, and efficient separation of photogenerated charge carriers, the WO3/rGO photoanode demonstrated superior rhodamine B (RhB) degradation rate (90% in 2 h), maximum power density (4.74 µW/cm2), and maximum photocurrent density (0.096 mA/cm2), 1.4, 2.4, and 4.0 times higher than the corresponding pure WO3 photoanode, respectively. Density functional theory (DFT) calculations reveal that the built-in electric field formed between the interface of WO3 and rGO promotes the transfer of photogenerated electrons from WO3 to rGO, thus exerting a significant impact on improving the migration and separation of photoinduced charge carriers. Moreover, by combining experimental and theoretical results, a complete PFC operation mechanism for the PFC system was proposed. This study focuses on the strategy of constructing rGO-doped photocatalysts to enhance the interfacial charge transfer mechanism, providing a promising approach for the development of high-performance photoanodes in PFC systems.

CeO2 nanospheres incorporated with Bi2MoO6/g-C3N4 enhanced photocatalysis towards environmental pollutant Rhodamine B removal.

We have adopted a novel CeO2/Bi2MoO6/g-C3N4-based ternary nanocomposite that was synthesized via hydrothermal technique. The physiochemical characterization of as-prepared samples was examined through various analytical techniques such as X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy TEM, photoluminescent spectra (PL), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET), and ultraviolet diffuse reflectance spectroscopy (UV-DRS) technique. In addition, the photocatalytic performance was carried out by degradation of Rhodamine B dye under visible light irradiation using this nanocatalyst. The ternary nanocomposite achieved 94% of the degradation efficiency within 100 min which is higher than the pristine and binary composites under the predetermined condition pH = 7, Rhodamine B dye = 5 mg/L, and catalyst concentration = 150 mg/L. The experimental synergetic effect of CeO2/Bi2MoO6/g-C3N4 ternary nanocomposite has been ascribed to the interfacial charge carrier migration between CeO2, Bi2MoO6, and g-C3N4. The optical absorption range of CeO2/Bi2MoO6/g-C3N4 ternary nanocomposite was enhanced, and the band gap was reduced up to 2.2 eV. In addition, scavenger trapping experiment proves that the super oxide anions (O2-.) and photogenerated holes are the major active species. The reusability and stability experiment proved the CeO2/Bi2MoO6/g-C3N4 ternary nanocomposite keeps good durability during the photocatalytic degradation process after the five successive cycles. Furthermore, based on the results, the charge carrier transfer photocatalytic mechanism was also discussed. This CeO2/Bi2MoO6/g-C3N4 ternary nanocomposite may offer the cheapest material and extend the great opportunity for clean and environmental remediation approach under the visible light irradiation.

Ca-doped ZnO nanoparticles for MB dye degradation and adsorptive removal of tinidazole.

Industrial dye degradation involves several processes by which dyes are broken down, ideally into innocuous products. Methylene blue (MB) is one of the most commonly employed dyes in the textile industry and is released into water in routine industry processes. These discharges lead to creating a nocuous nature for humans and animals. Drugs are also discharged into water bodies from various pharmaceutical industries. In these two contexts, in the present work, the green synthesis of calcium-doped zinc oxide nanoparticles (Ca-doped ZnO NPs) is achieved using the aqueous peel extract of Citrus limetta by the solution combustion technique. The structural, morphological, and optical properties of the synthesized Ca-doped ZnO NPs are investigated using XRD, FTIR, SEM, EDX, and UV-visible spectroscopy. The prepared NPs were subjected to photocatalytic degradation of MB dye under visible-light illumination, which shows ~ 95% dye degradation. The synthesized Ca-doped ZnO NPs were also employed to adsorb tinidazole (TDZ), a nitroimidazole antibiotic, from water samples. An excellent adsorptive capacity of the NPs was observed for selectively adsorbing the TDZ ~ 96.2%. The drug TDZ was found to have pseudo-second-order kinetics. The catalyst recycling proved its repeatability; removal of the dye reached up to 92% after three successive usages. Therefore, using waste Citrus limetta peel extract, the multifunctional Ca-doped ZnO NPs were synthesized, which maintained effective adsorption potential and photocatalytic abilities and could be used as an effective material for environmental remediation.