Soil colloids can significantly enhance spreading of polybromodiphenyl ethers in groundwater by serving as an effective carrier.

Polybromodiphenyl ethers (PBDEs), the widely used flame retardants, are common contaminants in surface soils at e-waste recycling sites. The association of PBDEs with soil colloids has been observed, indicating the potential risk to groundwater due to colloid-facilitated transport. However, the extent to which soil colloids may enhance the spreading of PBDEs in groundwater is largely unknown. Herein, we report the co-transport of decabromodiphenyl ester (BDE-209) and soil colloids in saturated porous media. The colloids released from a soil sample collected at an e-waste recycling site in Tianjin, China, contain high concentration of PBDEs, with BDE-209 being the most abundant conger (320 ± 30 mg/kg). The colloids exhibit relatively high mobility in saturated sand columns, under conditions commonly observed in groundwater environments. Notably, under all the tested conditions (i.e., varying flow velocity, pH, ionic species and ionic strength), the mass of eluted BDE-209 correlates linearly with that of eluted soil colloids, even though the mobility of the colloids varies markedly depending on the specific hydrodynamic and solution chemistry conditions involved. Additionally, the mass of BDE-209 retained in the columns also correlates strongly with the mass of retained colloids. Apparently, the PBDEs remain bound to soil colloids during transport in porous media. Findings in this study indicate that soil colloids may significantly promote the transport of PBDEs in groundwater by serving as an effective carrier. This might be the reason why the highly insoluble and adsorptive PBDEs are found in groundwater at some PBDE-contaminated sites.

Sustainable resilient E-waste management in London: A circular economy perspective.

The circular economy (CE) is reasoned to organize complex systems supporting sustainable resilience by distinguishing between waste materials and economic growth. This is crucial to the electronic waste (e-waste) industry of developed countries, and e-waste operation management has become their top priority because e-waste contains toxic materials and valuable sources of elements. In the UK, although London Metropolitan city boasts an ambitious sustainable resilience target underlying the context of CE, practical implementation has yet to be feasible, with few investigations detailing if and how the existing target implications enable industrial and social-ecological sectors to continue their performance functionalities in the face of undesired disruptions. In this paper, a dynamic Bayesian Network (dynamic BN) approach is developed to address a range of potential risks. The existing London e-waste operation management is considered as an application of study for sustainable resilience development. Through the utilization of dynamic BN, a comprehensive analysis yields a Resilience Index (RI) of 0.5424, coupled with a StdDev of 0.01350. These metrics offer a profound insight into the intricate workings of a sustainable system and its capacity to swiftly rebound from unexpected shocks and disturbances. This newfound understanding equips policymakers with the knowledge needed to navigate the complexities of sustainable e-waste management effectively. The implications drawn from these in-depth analyses furnish policymakers with invaluable information, enabling them to make judicious decisions that advance the cause of sustainable e-waste management. The findings underscore that the absorptive capacity of a sustainable and resilient e-waste operation management system stands as the foremost defense mechanism against unforeseen challenges. Furthermore, it becomes evident that two pivotal factors, namely "diversifying the supply chain" and "enhancing supply chain transparency," play pivotal roles in augmenting the sustainability and resilience of e-waste operation management within the context of London's ambitious sustainability targets. These factors are instrumental in steering the trajectory of e-waste management towards a more sustainable and resilient future, aligning with London's aspirations for a greener and more eco-conscious future.

Understanding consumer attitudes towards second-hand robots for the home.

As robot numbers in the home increase, creating a market for second-hand robotic systems is essential to reduce the waste impact of the industry. Via a survey, consumer attitudes of United Kingdom participants towards second-hand robots were investigated; finding that second-hand robots with guarantees have an equal purchasing interest compared to new systems, highlighting the opportunity for manufacturers and retailers to develop certification standards for second-hand robots to move towards a circular economy. Consumer demographics also demonstrated that those most open to the purchase of both new and second-hand systems were women, those aged 18-25 years old, and those who have previously owned a robot for the home. Participants' prior ownership of second-hand electronic devices (such as phones and laptops) did not affect rates of interest for second-hand robotic systems suggesting that the technology is still too new for people to be able to project their experience of current second-hand electronics to that of a robot. Additionally, this research found the robotics industry can consider the potential market for second-hand robots to be more similar to the second-hand smartphone market than to the household electronics market, and lessons learnt from the concerns raised by consumers for other internet-enabled electronic devices are similar to those concerns for second-hand robots. This provides an opportunity for the industry to break down the barriers for a circular economy earlier in the technology maturity process than has been seen for other electronics.

Organophosphate flame retardants in air from formal e-waste recycling workshops in China: Size-distribution, gas-particle partitioning and exposure assessment.

In order to understand the organophosphate flame retardants (OPFRs) pollution and evaluate the inhalation exposure risk in formal e-waste recycling facilities, the air concentrations, particle size distribution and gas-particle partitioning of OPFRs in four typical workshops were investigated. The total Σ15OPFR concentrations inside workshops were in the range of 64.7-682 ng/m3, with 5.80-23.4 ng/m3 in gas phase and 58.8-658 ng/m3 in particle phase. Triphenyl phosphate (TPHP) and tris(2-chloroisopropyl) phosphate (TCIPP) were main analogs, both of which contributed to 49.0-85.7% of total OPFRs. In the waste printed circuit boards thermal treatment workshop, the OPFRs concentration was the highest, and particle-bound OPFRs mainly distributed in 0.7-1.1 µm particles. The proportions of TPHP in different size particles increased as the decrease of particle size, while TCIPP presented an opposite trend. The gas-particle partitioning of OPFR analogs was dominated by absorption process, and did not reach equilibrium state due to continuous emission of OPFRs from the recycling activities. The deposition fluxes of OPFRs in respiratory tract were 65.7-639 ng/h, and the estimated daily intake doses of OPFRs were 8.52-76.9 ng/(kg·day) in four workshops. Inhalation exposure was an important exposure pathway for e-waste recycling workers, and deposition fluxes of size-segregated OPFRs were mainly in head airways region.

E-waste: mechanisms of toxicity and safety testing.

Currently, information on the toxicity profile of the majority of the identified e-waste chemicals, while extensive and growing, is admittedly fragmentary, particularly at the cellular and molecular levels. Furthermore, the toxicity of the chemical mixtures likely to be encountered by humans during and after informal e-waste recycling, as well as their underlying mechanisms of action, is largely unknown. This review paper summarizes state-of-the-art knowledge of the potential underlying toxicity mechanisms associated with e-waste exposures, with a focus on toxic responses connected to specific organs, organ systems, and overall effects on the organism. To overcome the complexities associated with assessing the possible adverse outcomes from exposure to chemicals, a growing number of new approach methodologies have emerged in recent years, with the long-term objective of providing a human-based and animal-free system that is scientifically superior to animal testing, more effective, and acceptable. This encompasses a variety of techniques, typically regarded as alternative approaches for determining chemical-induced toxicities and holds greater promise for a better understanding of key events in the metabolic pathways that mediate known adverse health outcomes in e-waste exposure scenarios. This is crucial to establishing accurate scientific knowledge on mixed e-waste chemical exposures in shorter time frames and with greater efficacy, as well as supporting the need for safe management of hazardous chemicals. The present review paper discusses important gaps in knowledge and shows promising directions for mechanistically anchored effect-based monitoring strategies that will contribute to the advancement of the methods currently used in characterizing and monitoring e-waste-impacted ecosystems.

Biomarker responses in Danio rerio following an acute exposure (96 h) to e-waste leachate.

Electronic waste (e-waste) has been identified as an emerging pollutant and is the fastest growing waste stream at the present time. Significant technological development and modernization within the last decade has led to the rapid accumulation of outdated, broken and unwanted electrical and electronic equipment (EEE). Electronic products mainly consist of a range of metal containing components that, when disposed of improperly, could result in metal constituents leached into the environment and posing a health risk to humans and animals alike. Metal exposure can induce oxidative stress in organisms, which could lead to synergistic, antagonistic and additive effects. The metals found highest in abundance in the simulated e-waste leachate, were nickel (Ni), barium (Ba), zinc (Zn), lithium (Li), iron (Fe), aluminium (Al) and copper (Cu). An acute exposure study was conducted over a 96 h period to determine the potential toxicity of e-waste on the test organism Danio rerio. Biomarker analysis results to assess the biochemical and physiological effects induced by e-waste leachate, showed a statistically significant effect induced on acetylcholinesterase activity, superoxide dismutase, catalase activity, reduced glutathione content, glutathione s-transferase, malondialdehyde and glucose energy available. The Integrated Biomarker Response (IBRv2) analysis revealed a greater biomarker response induced as the exposure concentration of e-waste leachate increased.

Heterogeneous CuxO Nano-Skeletons from Waste Electronics for Enhanced Glucose Detection.

Electronic waste (e-waste) and diabetes are global challenges to modern societies. However, solving these two challenges together has been challenging until now. Herein, we propose a laser-induced transfer method to fabricate portable glucose sensors by recycling copper from e-waste. We bring up a laser-induced full-automatic fabrication method for synthesizing continuous heterogeneous CuxO (h-CuxO) nano-skeletons electrode for glucose sensing, offering rapid (< 1 min), clean, air-compatible, and continuous fabrication, applicable to a wide range of Cu-containing substrates. Leveraging this approach, h-CuxO nano-skeletons, with an inner core predominantly composed of Cu2O with lower oxygen content, juxtaposed with an outer layer rich in amorphous CuxO (a-CuxO) with higher oxygen content, are derived from discarded printed circuit boards. When employed in glucose detection, the h-CuxO nano-skeletons undergo a structural evolution process, transitioning into rigid Cu2O@CuO nano-skeletons prompted by electrochemical activation. This transformation yields exceptional glucose-sensing performance (sensitivity: 9.893 mA mM-1 cm-2; detection limit: 0.34 µM), outperforming most previously reported glucose sensors. Density functional theory analysis elucidates that the heterogeneous structure facilitates gluconolactone desorption. This glucose detection device has also been downsized to optimize its scalability and portability for convenient integration into people's everyday lives.

Spatial distribution and health risks assessment of heavy metals in e-waste dumping sites from Pakistan.

The present study focused on to determine the concentration and health risk of heavy metals (Cu, Pb, Zn, Cd, Hg, Cr) in e-waste contaminated soils collected from different provinces of Pakistan. Further, the impact of heavy metals on soil enzyme activities and microbial community was also investigated. The concentration (mg/kg) of Hg, Zn, Fe, Cu, Pb, Cd, and Cr ranged between 0-0.258, 2.284-6.587, 3.005-40.72, 8.67-36.88, 12.05-35.03, 1.03-2.43, and 33.13-60.05, respectively. The results revealed that Lahore site of Punjab province indicated more concentration of heavy metals as compared to other sites. The level of Cr at all sites whereas Hg at only two sites exceeds the World Health Organization standards (WHO) for soil. Soil enzyme activity exhibited dynamic trend among the sites. Maximum enzyme activity was observed for urease followed by phosphatase and catalase. Contamination factor (Cf), Pollution load index (PLI), and geo-accumulation index (Igeo) results showed that all the sites are highly contaminated with Cu, Cd, and Pb. Hazard index (HI) was less than 1 for children and adults suggesting non-carcinogenic health risk. Principle component analysis results depicted relation among Cr, Fr, catalase, and actinomycetes; Cd, OM, urease, and bacteria, and Pb, Cu, Zn, Hg, and phosphatase, suggesting soil enzymes and microbial community profiles were influenced by e-waste pollution. Therefore, there is a dire need to introduce sustainable e-waste recycling techniques as well as to make stringent e-waste management policies to reduce further environmental contamination.

Elemental characterization of electronic waste: a review of research methodologies and applicability to the practice of e-waste recycling.

Economic and environmental considerations have elucidated research interests on the best approach to managing electronic waste (e-waste), which has increasing social, environmental, and economic impacts. Proper e-waste managementis essential for resource recovery, environmental sustainability, and public health protection, and effective management of e-waste necessitates analytical techniques to assess and characterize their elemental composition. Despite expansive literature published on the topic of e-waste, there is scarce coverage of the various analytical techniques employed to characterize the inorganic contents of e-waste. This review discusses the various e-waste characterization techniques used in studies published between 2013 and 2023. Specifically, this review covers the analytical approaches employed to characterize the inorganic content of e-waste, the electronic devices or their components analyzed, the elements identified, the sample preparation methods adopted, and the merits and demerits of the analytical procedures. This review highlights the disparate approaches to e-waste characterization and the need for reliable and repeatable e-waste analysis and sample preparation methods.

Assessment of direction changes in waste electrical and electronic equipment management in Poland.

A growing amount of waste electrical and electronic equipment (WEEE) indicates the need to verify the effectiveness of its management both nationally and globally. An analysis of the WEEE economy in Poland conducted over 5 years confirmed a 16.64% increase in the mass of collected equipment. The maximum annual mass of electrical and electronic equipment introduced to the market during this period was 607,240 Mg, with the average value exceeding 500,000 Mg. The WEEE category with the largest collected mass was waste code 20 01 36, which exceeded 235,000 Mg, whilst the highest waste weight accumulation rate of 45.98 kg per capita was recorded in one of the smallest voivodeships in Poland. This result showed the diversity of WEEE accumulation on a national scale. Overall, a noticeable increase in the WEEE accumulation rate has occurred as Poland's gross domestic product has increased, despite a decreasing population. An analysis based on the waste accumulation indicators, including socioeconomic factors, confirmed the need to develop forms of WEEE recovery and recycling to transition to a circular economy and promote the synergy of activities amongst all players in WEEE management.

Rhodococcus erythropolis ATCC 4277 behavior against different metals and its potential use in waste biomining.

Rhodococcus erythropolis bacterium is known for its remarkable resistance characteristics that can be useful in several biotechnological processes, such as bioremediation. However, there is scarce knowledge concerning the behavior of this strain against different metals. This study sought to investigate the behavior of R. erythropolis ATCC 4277 against the residue of chalcopyrite and e-waste to verify both resistive capacities to the metals present in these residues and their potential use for biomining processes. These tests were carried out in a stirred tank bioreactor for 48 h, at 24ºC, pH 7.0, using a total volume of 2.0 L containing 2.5% (v/v) of a bacterial pre-culture. The pulp density of chalcopyrite was 5% (w/w), and agitation and oxygen flow rates were set to 250 rpm and 1.5 LO2 min-1, respectively. On the other hand, we utilized a waste of computer printed circuit board (WPCB) with a pulp density of 10% (w/w), agitation at 400 rpm, and an oxygen flow rate of 3.0 LO2 min-1. Metal concentration analyses post-fermentation showed that R. erythropolis ATCC 4277 was able to leach about 38% of the Cu present in the chalcopyrite residue (in ~ 24 h), and 49.5% of Fe, 42.3% of Ni, 27.4% of Al, and 15% Cu present in WPCB (in ~ 24 h). In addition, the strain survived well in the environment containing such metals, demonstrating the potential of using this bacterium for waste biomining processes as well as in other processes with these metals.

Enhancing the Delamination Efficiency of Polyimide-Copper Bilayers with UV/Heat-Activated Foamable Adhesive: Insights and Applications.

This study explores the adhesive properties of copolymers comprising glycidyl methacrylate (GMA) and 3-(trimethoxysilyl)propyl methacrylate (MPTMS), focusing on their suitability for adhesive applications. Peel resistance measurements revealed a substantial impact of the GMA/MPTMS ratio on adhesion capabilities, identifying an optimal ratio of 30/70 for copolymerization with tert-butyl acrylate (tBA) to improve foaming performance. tBA, a foaming monomer activated by a photoacid generator and heat, enhances the copolymerized adhesive's adhesion strength and foamability for postuse delamination. Chemical structure analysis through Nuclear magnetic resonance (NMR) and Fourier-transform infrared spectroscopy (FTIR) confirmed successful polymerization, while rheological properties indicated decreased complex viscosity and adhesive strength with an increasing tBA content. The deprotection of the t-butyl group facilitated foam formation, supported by morphology analysis. These findings provide insights into foamable adhesive development with potential applications in delamination processes and implications for further exploration in polymer adhesion.

Effects of polymer matrix and temperature on pyrolysis of tetrabromobisphenol A: Product profiles and transformation pathways.

Plastics are crucial constituents in electronic waste (e-waste) and part of the issue in e-waste recycling and environmental protection. However, previous studies have mostly focused on plastic recovery or thermal behavior of flame retardants, but not both simultaneously. The present study simulated the process of e-waste thermal treatment to explore tetrabromobisphenol A (TBBPA) pyrolysis at various temperatures using polystyrene (PS), polyvinyl chloride (PVC), and e-waste plastics as polymer matrices. Pyrolysis of TBBPA produced bromophenol, bromoacetophenone, bromobenzaldehyde, and bromobisphenol A. Co-pyrolysis with the polymer matrices increased emission factors by 1 - 2 orders of magnitude. The pyrolytic products of TBBPA, TBBPA+PS, and TBBPA+PVC were mainly low-brominated bisphenol A, while that of TBBPA in e-waste plastics was consistently bromophenol. Increasing temperature drove up the proportions of gaseous and particulate products, but lowered the relative abundances of inner wall adsorbed and residual products in pyrolysis of pure TBBPA. In co-pyrolysis of TBBPA with polymer matrix, the proportions of products in different phases were no longer governed solely by temperature, but also by polymer matrix. Co-pyrolysis of TBBPA with PS generated various bromophenols, while that with PVC produced chlorophenols and chlorobrominated bisphenol A. Transformation pathways, deduced by ab initio calculations, include hydrogenation-debromination, isopropylphenyl bond cleavage, oxidation, and chlorination.

Associations of co-exposure to polycyclic aromatic hydrocarbons and lead (Pb) with IGF1 methylation in peripheral blood of preschool children from an e-waste recycling area.

BACKGROUND: Childhood exposure to polycyclic aromatic hydrocarbons (PAHs) or lead (Pb) is associated with epigenetic modifications. However, the effects of their co-exposures on IGF1 (Insulin-like growth factor 1) methylation and the potential role in child physical growth are unclear. METHODS: From our previous children study (N = 238, ages of 3-6), 75 children with higher total concentrations of urinary ten hydroxyl PAH metabolites (∑10OH-PAHs) from an e-waste recycling area, Guiyu, and 75 with lower ∑10OH-PAHs from Haojiang (reference area) were included. Pb and IGF1 P2 promoter methylation in peripheral blood were also measured. Multivariable linear regression analyses were performed to estimate individual associations, overall effects and interactions of co-exposure to OH-PAHs and Pb on IGF1 methylation were further explored using Bayesian kernel machine regression. RESULTS: Methylation of IGF1 (CG-232) was lower (38.00 vs. 39.74 %, P < 0.001), but of CG-207 and CG-137 were higher (59.94 vs. 58.41 %; 57.60 vs. 56.28 %, both P < 0.05) in exposed children than the reference. The elevated urinary 2-OHPhe was associated with reduced methylation of CG-232 (B = -0.051, 95 % CI: -0.096, -0.005, P < 0.05), whereas blood Pb was positively associated with methylation of CG-108 (B = 0.106, 95 %CI: 0.013, 0.199, P < 0.05), even after full adjustment. Methylations of CG-224 and 218 significantly decreased when all OH-PAHs and Pb mixtures were set at 35th - 40th and 45th - 55th percentile compared to when all fixed at 50th percentile. There were bivariate interactions of co-exposure to the mixtures on methylations of CG-232, 224, 218, and 108. Methylations correlated with height, weight, were observed in the exposed children. CONCLUSIONS: Childhood co-exposure to high PAHs and Pb from the e-waste may be associated with IGF1 promoter methylation alterations in peripheral blood. This, in turn, may interrupt the physical growth of preschool children.

A biogenic hydrogel to recover Au(III) from electronic waste.

In the course of this investigation, we undertook the contemplation of a green chemistry paradigm with the express intent of procuring valuable metal, namely gold, from electronic waste (e-waste). In pursuit of this overarching objective, we conceived a procedural framework consisting of two pivotal stages. As an initial stage, we introduced a physical separation procedure relying on the utilization of the Eddy current separator, prior to embarking on the process of leaching from e-waste. Subsequent to the partitioning of metals from the non-metal constituents of waste printed circuit boards (PCB), we initiated an investigation into the hydrogel derived from basil seeds (Ocimum basilicum L.), utilizing it as a biogenic sorbent medium. The thorough characterization of hydrogel extracted from basil seeds involved the application of an array of analytical techniques, encompassing FTIR, XRD, SEM, and BET. The batch sorption experiments show more than 90% uptake in the pH range of 2-5. The sorption capacity of the hydrogel material was evaluated as 188.44 mg g-1 from the Langmuir Isotherm model. The potential interference stemming from a spectrum of other ions, encompassing Al, Cu, Ni, Zn, Co, Cr, Fe, Mn, and Pb was systematically examined. Notably, the sole instance of interference in the context of adsorption of gold ions was observed to be associated with the presence of lead. The application of the hydrogel demonstrated a commendable efficiency in the recovery of Au(III) from the leached solution derived from the waste PCB.

Rural electrification in Nigeria: A review of impacts and effects of frugal energy generation based on some of e-waste components.

Nigeria is the seventh most populous country in world being the highest in Africa. The country is blessed with vast natural resources and is one of the highest producers of oil in the world. However, the inadequate supply of electrical energy is a major setback in the nation's economic development. Thus, there is need for an urgent and immediate solution to address the electricity access situation in Nigeria. It is in view of this that we first present an overview of the electrical energy situation of Nigeria (especially in the rural areas). The benefits of rural electrification and it impacts are discussed to buttress the need for electrifying rural areas and an overview of the abundant renewable energy resources in Nigeria is presented. As a proposed solution to improve the electricity situation, the concept of a reuse solar photovoltaic system based on e-waste components and old materials is presented. The system comprises repurposed Power Supply Unit (PSU) from old desktop computers, old thermal car Lead-acid batteries, old solar panels and Uninterruptible Power Supply (UPS) units. The possibility of adopting this solution in Nigeria depends on the amount of e-wastes generated annually thus necessitating the need for an analysis to see the annual impact of this system on electricity access based on the amount of available e-waste. Using the huge amount of e-waste generated/received annually in Nigeria, the feasibility of our solution is assessed by estimating the possible number of households that could be electrified by the second life renewable energy systems we propose. Due to the lack of official data in this field, certain constraints and assumptions were defined for the purpose of this analysis which resulted in obtaining a range of results that showed the possible impacts of adopting the reuse system. The analysis showed the minimum and maximum impacts the reuse solution could have on electricity access in Nigeria, based on best and worst case scenario respectively. The results further showed that an average of 287,000 households can be electrified annually if this solution is adopted, causing 2.2 % increment in population with electricity access in a year (between 620 thousand and 4.1 million individuals). Thus, the result is an indication that it is possible to achieve immediate growth in electricity access based on renewable energy integration, frugal innovation and reuse/repurposing of e-waste materials. In addition, this extension of their lifespan reduces their ecological footprint. It is expected that the energy demands of the continuously growing population can be met by strict adherence to set targets including adoption of smart-grids, generation diversification and focusing on rural electrification.

Occurrence and ecotoxicological impacts of polybrominated diphenyl ethers (PBDEs) in electronic waste (e-waste) in Africa: Options for sustainable and eco-friendly management strategies.

Polybrominated diphenyl ethers (PBDEs) are persistent contaminants used as flame retardants in electronic products. PBDEs are contaminants of concern due to leaching and recalcitrance conferred by the stable and hydrophobic bromide residues. The near absence of legislatures and conscious initiatives to tackle the challenges of PBDEs in Africa has allowed for the indiscriminate use and consequent environmental degradation. Presently, the incidence, ecotoxicity, and remediation of PBDEs in Africa are poorly elucidated. Here, we present a position on the level of contamination, ecotoxicity, and management strategies for PBDEs with regard to Africa. Our review shows that Africa is inundated with PBDEs from the proliferation of e-waste due to factors like the increasing growth in the IT sector worsened by the procurement of second-hand gadgets. An evaluation of the fate of PBDEs in the African environment reveals that the environment is adequately contaminated, although reported in only a few countries like Nigeria and Ghana. Ultrasound-assisted extraction, microwave-assisted extraction, and Soxhlet extraction coupled with specific chromatographic techniques are used in the detection and quantification of PBDEs. Enormous exposure pathways in humans were highlighted with health implications. In terms of the removal of PBDEs, we found a gap in efforts in this direction, as not much success has been reported in Africa. However, we outline eco-friendly methods used elsewhere, including microbial degradation, zerovalent iron, supercritical fluid, and reduce, reuse, recycle, and recovery methods. The need for Africa to make and implement legislatures against PBDEs holds the key to reduced effect on the continent.

Contamination characteristics and dietary intake risk of brominated flame retardants in fishes around a typical e-waste dismantling site in Southern China.

Polybrominated diphenyl ethers (PBDEs) and their substitutes, novel brominated flame retardants (NBFRs), are ubiquitously present in the aquatic environment of electronic waste (e-waste) dismantling region, leading to their inevitable absorption and accumulation by aquatic organisms, which can be transferred to human via directly aquatic product consumption or through food chain, thereby posing potential health risks. This study focused on fish samples from Guiyu and its surrounding areas, and found the total PBDEs concentrations were 24-7400 ng/g lw (mean: 1800 ng/g lw) and the total NBFRs concentrations were 14 to 2300 ng/g lw (mean: 310 ng/g lw). Significant positive correlations were found among PBDE congeners, among different NBFRs, and between NBFRs and commercial PBDEs that they replace. ΣPBDEs and ΣNBFRs in the intestine were 620-350,000 and 91-81,000 ng/g lw (mean: 83000 and 12,000 ng/g lw, respectively), significantly exceeding those in the gills, where ΣPBDEs and ΣNBFRs were 14-37,000 and 39-45,000 ng/g lw (mean: 9200 and 2400 ng/g lw, respectively). The ΣPBDEs and ΣNBFRs showed no non-carcinogenic risks to the target population through dietary intake. Despite the significantly higher daily intake of decabromodiphenyl ethane (DBDPE) compared to decabromodiphenyl ether (BDE209), the non-carcinogenic risk associated with BDE209 remained higher than that of DBDPE. Our findings can assist researchers in understanding the presence of BFRs in aquatic organisms, inhabiting e-waste dismantling areas, and in evaluating the associated health risks posed to humans through dietary exposure.

Bisphenol Chemicals in Surface Soil from E-Waste Dismantling Facilities and the Surrounding Areas: Spatial Distribution and Health Risk.

Electronic waste (e-waste) dismantling facilities are well-known bisphenol chemical (BP) sources. In this study, non-targeted screening combined with targeted analysis of BPs in surface soil from e-waste dismantling facilities and their surroundings revealed their presence, distribution, and exposure risk. A total of 14 BPs were identified including bisphenol A (BPA) and its novel structural analogs and halogenated BPs. The total concentrations of BPs ranged from 963 to 47,160 ng/g (median: 6970 ng/g) in e-waste soil, higher than those measured in surface soil from surrounding areas, i.e., 10-7750 ng/g (median 197 ng/g). BPA, tetrabromobisphenol A (TBBPA), and bisphenol F (BPF) were the dominant ones from the two areas. Concentrations of TBBPA and its debromination product from the surrounding area significantly decreased with increasing distances from the e-waste dismantling facilities. Estimation of daily intake via oral ingestion of soil suggests that current contamination scenarios are unlikely to pose health risks for e-waste dismantling workers and adults and toddlers living in the surrounding areas, with their intakes generally well below the tolerable daily intakes proposed for several BPs. However, the BPA intakes of workers exceeded the more strict tolerable daily intake for BPA established recently, which merits continuous environmental surveillance.

Development of complete hydrometallurgical processes for gold recovery from ICs and CPUs using ionic liquids.

Integrated circuits (ICs) and central processing units (CPUs), essential components of electrical and electronic equipment (EEE), are complex composite materials rich in recyclable high-value strategic and critical metals, with many in concentrations higher than in their natural ores. With gold the most valuable metal present, increase in demand for gold for EEE and its limited availability have led to a steep rise in the market price of gold, making gold recycling a high priority to meet demand. To overcome the limitations associated with conventional technologies for recycling e-waste, the use of greener technologies (ionic liquids (ILs) as leaching agents), offers greater potential for the recovery of gold from e-waste components. While previous studies have demonstrated the efficiency and feasibility of using ILs for gold recovery, these works predominantly concentrate on the extraction stage and often utilise simulated solutions, lacking the implementation of a complete process validated with real samples to effectively assess its overall effectiveness. In this work, a simulated Model Test System was used to determine the optimal leaching and extraction conditions before application to real samples. With copper being the most abundant metal in the e-waste fractions, to access the gold necessitated a two-stage pre-treatment (nitric acid leaching followed by aqua regia leaching) to ensure complete removal of copper and deliver a gold-enriched leach liquor. Gold extraction from the leach liquor was achieved by liquid-liquid extraction using Cyphos 101 (0.1 M in toluene with an O:A = 1:1, 20 °C, 150 rpm, and 15 min) and as a second process by sorption extraction with loaded resins (Amberlite XAD-7 with 300 mg of Cyphos 101/g of resins at 20 °C, 150 rpm and 3 h). In both processes, complete stripping and desorption of gold was achieved (0.5 M thiourea in 0.5 M HCl) and gold recovered, as nanoparticles of purity ≥95%, via a reduction step using a sodium borohydride solution (0.1 M NaBH4 in 0.1 M NaOH). These two hydrometallurgical processes developed can achieve overall efficiencies of ≥95% for gold recovery from real e-waste components, permit the reuse of the IL and resins up to five consecutive times, and offer a promising approach for recovery from any e-waste stream rich in gold.