Effect of concentration and wavelength of excitation on the photophysics of salicylate anion in acetonitrile and water.

Sodium salicylate (NaSA) molecule exists as salicylate anion in acetonitrile (ACN) and water solvents, and exhibits large Stokes shifted fluorescence due to excited state intramolecular proton transfer (ESIPT), with decay times of âˆ¼5 ns in ACN and âˆ¼3.9 ns in water by 300 nm (absorption maxima) excitation. Previous studies report both ground and excited state enol-keto tautomerization in ACN, but only excited state tautomerization in water at 10-4 M. However, the current work explores the effect of concentration and excitation wavelengths on the photoinduced dynamics of ESIPT in the salicylate anion. On increasing the concentration of NaSA, no change in absorption spectra appears in both the solvents, and emission spectra of NaSA in water remain unaffected by changes in concentration or excitation wavelength, whereas, a slight red shift and decrease in FWHM appears in ACN. Time-domain fluorescence measurements show predominantly single-exponential decay throughout the emission profile by 300 nm excitation above the 10-5 M concentration in both the solvents, while by 375 nm excitation, multi-exponential fluorescence decay is observed at low concentrations, and as the concentration of NaSA increases, this decay behaviour tends to converge towards a single exponential decay. These results suggest that solute-solvent interactions stabilize the ground-state intermolecular hydrogen-bonded species at low concentrations, while higher concentrations weaken these interactions, leading to emission solely from the salicylate anion. Peak fit analysis of excitation spectra confirms enol-keto tautomerization in both the solvents, with the keto form being more stabilized in ACN. These findings underscore that in ACN, behaviour of NaSA is influenced by both concentration and excitation wavelength and contrary to previous reports, the keto form of the molecule is also present in water, though at a very low concentration and an increase in non-radiative transitions in water cause fluorescence quenching.

The first ER-targeting flavone-based fluorescent probe for Cys: Applications in real-time tracking in an epilepsy model and food analysis.

Epilepsy is one of the most commonly-seen neurological disorders, and both endoplasmic reticulum stress (ERS) and oxidative stress (OS) have been demonstrated to be associated with epileptic seizures. As one of the three endogenous thiol-containing amino acids, cysteine (Cys) is recognized not only as an important biomarker of various biological processes but also widely used as a significant additive in the food industry. However, the exact role that Cys plays in ERS has not been well answered up to now. In this paper, we reported the first flavone-based fluorescent probe (namely BFC) with nice endoplasmic reticulum (ER)-targeting ability, which was capable of monitoring Cys in a fast response (3.0 min), large stokes shift (130 nm) and low detection limit (10.4 nM). The recognition mechanism of Cys could be attributed to the addition-cyclization reaction involving a Cys residue and an acrylate group, resulting in the release of the strong excited-state intramolecular proton transfer (ESIPT) emission molecule of benzoflavonol (BF). The low cytotoxicity and good biocompatibility of the probe BFC allowed for monitoring the fluctuation of endogenous Cys levels under both ERS and OS processes, as well as in zebrafish models of epilepsy. Quantitative determination of Cys with the probe BFC was also achieved in three different food samples. Additionally, a probe-immersed test strips integrated with a smartphone device was successfully constructed for on-site colorimetric detection of Cys. Undoubtedly, our work provided a valuable tool for tracking Cys levels in both an epilepsy model and real food samples.

Complexity-Building Exhaustive Dearomatization of Benzenoid Aromatics within an ESIPT-Initiated Three-Step Photochemical Cascade.

Dearomative cycloadditions offer rapid access to complex 3D molecular architectures, commonly via a sp2-to-sp3 rehybridization of two atoms of an aromatic ring. Here we report that the 6e π-system of a benzenoid aromatic pendant could be exhaustively depleted within a single photochemical cascade. An implementation of this approach involves the initial dearomative [4+2] cycloaddition of the Exited State Intramolecular Proton Transfer (ESIPT)-generated azaxylylene, followed by two consecutive [2+2] cycloadditions of auxiliary π moieties strategically positioned in the photoprecursor. Such photochemical cascade fully dearomatizes the benzenoid aromatic ring, saturating all six sp2 atoms to yield a complex sp3-rich scaffold with high control of its 3D molecular shape, rendering it a robust platform for rapid systematic mapping of underexplored chemical space. Significant growth of molecular complexity - starting with a modular synthesis of photoprecursors from readily available building blocks - is quantified by Böttcher score calculations.

Theoretical Investigations on the Sensing Mechanism of Dicyanoisophorone Fluorescent Probe for the Detection of Hydrogen Sulfide.

As one of the biomolecules, hydrogen sulfide (H2S) has received a lot of attention. Recent studies have shown that endogenous hydrogen sulfide plays different roles in different organs in biological systems. Fluorescent probe technology has been widely adopted due to its many advantages such as low cost, simple operation, and high sensitivity. Among many probes, dicyanoisophorone fluorophore is often used in probe design for real-time detection of endogenous H2S due to the large Stokes shift and long fluorescence emission wavelength. In this paper, the fluorescence sensing mechanism of dicyanoisophorone-like probe L and its product 3 with near-infrared fluorescence emission has been theoretically investigated by using theory methods. The analysis of infrared (IR) vibration spectra and reduced density gradient (RDG) showed that the hydrogen bond of the enolic structure of product 3 was significantly enhanced in the S1 state. The spectroscopic information revealed that the emission of NIR fluorescence originated from the keto structure of the product. Finally, potential energy curves and frontier molecular orbitals diagrams showed that the fluorescence quenching phenomenon of the probe L was attributed to the photoinduced electron transfer (PET) process, whereas the product 3 generated after the detection of H2S undergoes the excited state intramolecular proton transfer (ESIPT) process.

Comparative Study of Fluorescence Emission of Fisetin, Luteolin and Quercetin Powders and Solutions: Further Evidence of the ESIPT Process.

Fisetin and Luteolin are important flavonoids produced in plants and known for their antioxidant, anti-inflammatory, neuroprotective, and analgesic properties. They are also good candidates for different types of biosensors. The model used to describe the fluorescence (FL) emission of these flavonoids involves an excited-state intermolecular proton transfer (ESIPT) process that causes a change in the molecule configuration and a corresponding decrease in the emission energy. Due to the different molecular structures of Fisetin and Luteolin, only one possible proton transfer within the molecule is allowed for each of them: transfer of the H3 proton for Fisetin and of the H5 for Luteolin. Here, we compare their calculated emission wavelengths, obtained using TDDFT/M06-2X/6-31++G(d,p), with their FL emission spectra measured on the corresponding powders and solutions and show that the experimental data are consistent with the presence of the ESIPT process. We also compare the emission wavelengths found for Fisetin and Luteolin with those calculated and measured for Quercetin, where, under photoexcitation, the transfers of both H3 and H5 protons are possible. We analyze the difference in the processes associated with the H3 and H5 proton transfers and discuss the reason for the predominance of the H5 proton transfer in Quercetin. Additionally, a new system of notation for flavonoid molecules is developed.

3-Ethoxysalicylaldimine-based symmetrical azine-linked luminogen exhibiting ESIPT and bright orange colour AIE behaviour with live cell bioimaging application.

Herein, we describe the design and development of a new cell-permeable aggregation-induced emission (AIE) active 3-ethoxysalicylaldimine-based symmetrical azine molecule HDBE. The synthesized compound underwent comprehensive investigation of different spectroscopic methods, like NMR, mass and single crystal X-ray diffraction analysis. The fluorophore HDBE exhibited the bright orange colour AIE behaviour in THF-H2O mixture. The drastic enhancement of emission was achieved upon adding the water to the THF solution of HDBE, with a concentration of 90%. Along with the dynamic light scattering (DLS) and quantum yield measurements, the formation of aggregates was also verified by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analysis. Further, HDBE demonstrated excited state intramolecular proton transfer (ESIPT) characteristics in different polarity of solvents, which was corroborated by absorption, emission and lifetime spectroscopical investigations. The detailed scrutiny of X-ray structure of HDBE displayed the two strong intramolecular hydrogen bonding interactions, while solid-state fluorescent spectra showed dual emission that corresponds to enol and keto form confirming the ESIPT feature. Further, the synthesized AIE molecule was non-toxic and cell-permeable, making it easy to label as a biomarker in live HeLa cells via fluorescent bioimaging. These studies offer a quick and easy way to develop both AIE and ESIPT-coupled molecules for live cell bioimaging applications.

Visible-Light-Driven Solid-State Fluorescent Photoswitches for High-Level Information Encryption.

Developing visible-light-driven fluorescent photoswitches in solid state remains an enormous challenge in smart materials. Such photoswitches are obtained from salicylaldimines through excited-state intramolecular proton transfer (ESIPT) and subsequent cis-trans isomerization strategies. By incorporating a bulky naphthalimide fluorophore into Schiff base, three photoswitches achieve dual-mode changes (both color and fluorescence) in the solid state. In particular, the optimal one generates triple fluorescence changing from green, to yellow and finally orange upon visible light irradiation. This switching process is fully reversible and can be repeated at least 10 times without obvious attenuation, suggesting its superior photo-fatigue resistance. Mechanism studies reveal that naphthalimide group not only enables the tuning of multicolor with an additional emission, but also induces a folded structure, reducing molecular stacking and facilitating ESIPT and cis-trans isomerization. As such, photopatterning, ternary encoding and transient information recording and erasing are successfully developed. The present study provides a reliable strategy for visible-light-driven fluorescent photoswitches, showing implications for advanced information encryption materials.

An insight into the role of ESIPT/TICT-based antioxidant flavone analogues in fluoro-probing diabetes-induced viscosity changes: a unified experimental and theoretical endeavour.

Potent antioxidants, like 3-hydroxy flavones, attracted considerable attention due to their excited state intramolecular proton transfer (ESIPT)-based fluorescence behaviour. This article is an interesting demonstration of a series of synthetic 3-hydroxy flavone analogues having high antioxidant activity as molecular rotor-like viscosity probes. Among these flavone analogues, 4'-N,N-dimethylamino-3-hydroxy flavone (3) is the most potent one, showing the twisted intramolecular charge transfer (TICT)-dependent fluoroprobing activity toward the blood viscosity changes associated with diabetes and free fatty acids (FFA)-induced nuclear viscosity changes of MIN6 cells. The TICT dynamics of (3), which instigates its viscosity probing activity, was comprehended with the help of DFT-based computational studies. Abnormal cellular viscosity changes are the pathological traits for various diseases, and non-toxic flavone-based viscosity probes can be useful for diagnosing such pathological conditions.

Bright green cellulose-based fluorescent probe toward Au3+ smartphone technology recognition and its visualization application.

In this study, a novel fluorescent probe, MAC-2, for the detection of Au3+ was designed and synthesised using cellulose as a carrier combined with benzothiazole derivatives. The structure of the probe was confirmed by SEM, XRD, FTIR, and 1H NMR, also the optical properties of the product were investigated. MAC-2 showed bright green fluorescence under a 365 nm UV lamp and exhibited significant quenching behaviour toward Au3+. MAC-2 utilises more sustainable biomass resources, featuring green and biodegradable characteristics that meet environmental requirements. Compared with most reported probes, it exhibits notable fluorescence properties. The limit of detection (LOD) is as low as 0.057 µM, and the response time is 1 min. It also demonstrates good specific recognition and anti-interference abilities. In addition, a smartphone was used as a portable signal processing device to achieve rapid detection of Au3+ concentration. Meanwhile, MAC-2 was successfully prepared as a fluorescent test strip, providing a potential application for the convenient detection of Au3+. The high sensitivity and selectivity exhibited by cellulose-based fluorescent probes in detecting Au3+ offer valuable insights and new ideas for the detection of other metal ions and biomolecules. These inspirations will help promote the continuous development of research and applications in related fields.

Theoretical Study on the Effect of Cyano- and Dimethylamine-Group on ESIPT Behavior and Luminescent Properties of Novel Flavone-Based Fluorophore.

Recently, a new fluorescent senor based on 3-hydroxy-2-(naphthalen-2-yl)-4 H-chromen-4-one (HFN) for selective detection of H2Sn was obtained in the experiment (Spectrochim. Acta Part A 271(2022)120962). Based on HFN, three new compounds (HFN1, HFN2 and HFN3) are designed to explore the influences of dimethylamine (-N(CH3)2) and cyano (-CN) groups on the excited-state intramolecular proton transfer (ESIPT) process and luminescent features of HFN. After analyzing the mainly geometrical parameters, electron densities and infrared spectra, we discovered that the intramolecular hydrogen bonds (IHBs) in the target molecules become stronger upon photo-excitation. Introducing -CN or/and -N(CH3)2 groups into HFN indeed influences its ESIPT behavior and luminescent properties. The -N(CH3)2 group enhances IHB, reduces ESIPT barrier and caused absorption/ fluorescence (at T form) peak blue-shift, while the -CN group shows a counterproductive effect. The coincidence of -N(CH3)2 and -CN made the absorption/fluorescent wavelength of HFN red-shift more than single -N(CH3)2 or -CN group does.

AI-Powered Mining of Highly Customized and Superior ESIPT-Based Fluorescent Probes.

Excited-state intramolecular proton transfer (ESIPT) has attracted great attention in fluorescent sensors and luminescent materials due to its unique photobiological and photochemical features. However, the current structures are far from meeting the specific demands for ESIPT molecules in different scenarios; the try-and-error development method is labor-intensive and costly. Therefore, it is imperative to devise novel approaches for the exploration of promising ESIPT fluorophores. This research proposes an artificial intelligence approach aiming at exploring ESIPT molecules efficiently. The first high-quality ESIPT dataset and a multi-level prediction system are constructed that realized accurate identification of ESIPT molecules from a large number of compounds under a stepwise distinguishing from conventional molecules to fluorescent molecules and then to ESIPT molecules. Furthermore, key structural features that contributed to ESIPT are revealed by using the SHapley Additive exPlanations (SHAP) method. Then three strategies are proposed to ensure the ESIPT process while keeping good safety, pharmacokinetic properties, and novel structures. With these strategies, >700 previously unreported ESIPT molecules are screened from a large pool of 570 000 compounds. The ESIPT process and biosafety of optimal molecules are successfully validated by quantitative calculation and experiment. This novel approach is expected to bring a new paradigm for exploring ideal ESIPT molecules.

Review on Synthesis of 2-(2-Hydroxyaryl) Benzothiazoles (HBT) for Excited-State Intra-molecular Proton Transfer (ESIPT)-Based Detection of Ions and Biomolecules.

In this review, we present a systematic and comprehensive summary of the recent developments in the synthetic strategies of 2-(2-hydroxyarylsubstituted)-benzothiazole (HBT) framework along with incorporation of various substituents on phenolic and benzothiazole rings which affect the emission process. The literature, spanning the years 2015-2024, on excited-state intramolecular proton transfer (ESIPT)-based studies of HBT derivatives comprising the effects of solvent polarity, substituents, and extended conjugation on fluorophores has been searched. ESIPT, intramolecular charge transfer, and aggregation-induced emissions enable these fluorescent probes to specifically interact with analytes, thereby altering their luminescence characteristics to achieve analyte detection. These fluorescent probes exhibit large Stokes shifts, high quantum yields, and excellent color transitions. Finally, the applications of HBTs as ESIPT-based fluorescent probes for the detection of cations, anions, and biomolecules have been summarized. We anticipate that this review will provide a comprehensive overview of the current state of research in this field and encourage researchers to develop novel ESIPT-based fluorophores with new applications.

AIE paper shred for the detection of evolved amine vapor from putrefaction processes of fish.

Seafood plays a major role in the human diet. During transportation, without proper storage and supply chain, its quality deteriorates easily. The post-harvesting processes such as the storage of food play a crucial role in human health. So it is highly imperative to have a technique for identifying food spoilage earlier to ensure the food safety and security of the consumers. Herein we have developed a highly selective and sensitive fluorescent 'Turn-on' probe 2-amino-5-nitrobenzo [d] thiazol-2-yl) imino)methylphenol ANT based on aggregation induced emission (AIE). ANT molecule possesses both restricted intramolecular rotation (RIR) and excited state intramolecular proton transfer (ESIPT) properties leading to fluorescent enhancement rather than aggregation caused quenching (ACQ). The probe shows high selectivity and sensitivity towards the NH3 vapor. This probe with the AIE property is employed for the real-time detection of NH3 in both aqueous and gaseous phases. ANT molecule is deposited on the paper shred by a physical method is utilized to monitor NH3 vapor from red snapper fish as a real-time sample during its degradation processes. After two days there is a ratiometric color change in the paper shred from yellow to orange for the fish stored at room temperature indicating its rotten and unpalatability nature. Paper shred is reused by immersing it into the tetrahydrofuran (THF), in which it retains its initial color due to deprotonation of NH3, keto to enol tautomerism discloses the reusability of the fluorescent probe. Studies carried out using UV-visible and fluorescence spectroscopy infer that the ANT probe has high affinity towards NH3 vapor.

A substituent-modified new salicylaldehyde-diphenyl-azine based AIEgen: A promising skeleton for copper ion sensor.

In this study, we have reported a novel 4-bromo-salicylaldehyde-diphenyl-azine (B-1), a new member of salicylaldehyde-diphenyl-azine (SDPA) family known for its excellent sensing properties. In contrast to the previously reported AIEgens, we found that the bromo-substitution at the 4th position of the salicylaldehyde moiety blue-shifted the emission by 10 and 15 nm as compared to the unsubstituted (Tong et.al 2017) and Bromo at the 5th position (Jain et.al 2023) respectively. Moreover, B-1 crystallizes instantly as the cooling process starts, which was not observed in the previously reported scaffolds. The sensing investigation again demonstrated the precise and ultrasensitive behavior of B-1 for copper ions. B-1 has a very low LOD value i.e. 29.2 x 10-8 M with a high association constant and binds with copper ion in 2:1 mode. This time we also analyzed the practical applicability in the solid phase using cotton swabs and performed the real-time estimation of copper ions in water and biological samples like urine and blood serum. The excellent percentage recovery and the RSD value suggest the precision of the experiments. Further, we also perform the sensing in living cancer HeLa cells. Altogether, we found that the SDPA skeleton is precise and ultrasensitive for copper ions and versatile which can be used variously to detect copper ions in the real world. This research will surely help in developing new specific skeleton-based AIEgens with desirable emission properties and precise applications in the future.

Uncovering the sensing mechanism of a zinc ion sensor: Fluorescence enhancement induced by the elimination of the TICT state.

Precise detection of zinc ion is of fundamental importance in the fields of environment protection and food safety. A comprehensive understanding of the sensing mechanism will help to the design of such sensors. The detailed photophysical process of a zinc ion sensor as well as the sensing mechanism are uncovered with the aid of density functional theory (DFT) and time-dependent density functional theory (TDDFT). Both the ground state and first excited state potential energy surfaces (PES) of the sensor are carefully explored to reveal the photo-physical process of the sensor. Excited state intramolecular proton transfer (ESIPT) is observed on the S1 state PES. Then, the twist motion of C=N double bond is triggered after the ESIPT process, which leads to a twisted intramolecular charge transfer (TICT) state. This TICT state is found to make the sensor non-emissive. With the addition of Zn2+, the TICT state is eliminated which greatly enhances the fluorescence of the sensor and achieves zinc ion detection. The interaction of the sensor with Cd2+ and Hg2+ are also explored, which well explains the good selectivity of the sensor.

Synthesis of Intrinsically-Fluorescent Aliphatic Tautomeric Polymers for Proton-Conductivity, Dual-State Emission, and Sensing/Oxidation-Reduction of Metal Ions.

Herein, fluorescent conducting tautomeric polymers (FCTPs) are developed by polymerizing 2-methylprop-2-enoic acid (MPEA), methyl-2-methylpropenoate (MMP), N-(propan-2-yl)prop-2-enamide (PPE), and in situ-anchored 3-(N-(propan-2-yl)prop-2-enamido)-2-methylpropanoic acid (PPEMPA). Among as-synthesized FCTPs, the most promising characteristics in FCTP3 are confirmed by NMR and Fourier transform infrared (FTIR) spectroscopies, luminescence enhancements, and computational studies. In FCTP3, ─C(═O)NH─, -C(═O)N<, ─C(═O)OH, and ─C(═O)OCH3 subluminophores are identified by theoretical calculations and experimental analyses. These subluminophores facilitate redox characteristics, solid state emissions, aggregation-enhanced emissions (AEEs), excited-state intramolecular proton transfer (ESIPT), and conductivities in FCTP3. The ESIPT-associated dual emission/AEEs of FCTP3 are elucidated by time correlated single photon counting (TCSPC) investigation, solvent polarity effects, concentration-dependent emissions, dynamic light scattering (DLS) measurements, field emission scanning electron microscopy images, and computational calculations. The cyclic voltammetry measurements of FCTP3 indicate cumulative redox efficacy of ─C(═O)OH, ─C(═O)NH─/-C(═O)N<, ─C(─O─)═NH+─/─C(─O─)═N+, and ─C(═N)OH functionalities. In FCTP3, ESIPT-associated dual-emission enable in the selective detection of Cr(III)/Cu(II) at λem1/λem2 with the limit of detection of 0.0343/0.079 ppb. The preferential interaction of Cr(III)/Cu(II) with FCTP3 (amide)/FCTP3 (imidol) and oxidation/reduction of Cr(III)/Cu(II) to Cr(VI)/Cu(I) are further supported by NMR-titration; FTIR and X-ray photoelectron spectroscopy analyses; TCSPC/electrochemical/DLS measurement; alongside theoretical calculations. The proton conductivity of FCTP3 is explored by electrochemical impedance spectroscopy and I-V measurements.

CPL of Mellein and Related Natural Compounds: Analysis of the ESIPT Phenomenon.

(R)-(-)-Mellein, (3R,4R)-4-hydroxymellein and (3R,4S)-4-hydroxymellein obtained from fungi, i. e. from Diplodia globulosa, were investigated as a class of natural products presenting ESIPT (excited state intramolecular proton transfer) phenomenon, through fluorescence and CPL (circularly polarized luminescence). The study was preceded by the assessment of the absolute configuration through ECD and VCD (electronic and vibrational circular dichroism) spectroscopies in addition to NMR spectra. It is found that ESIPT takes place in these systems very rapidly, and no dual fluorescence has been observed. The experimental study is backed up by TD-DFT calculations of ECD and CPL spectra, plus MD calculations to follow proton transfer in the excited state and careful analysis of the puckering dynamics of the lactone ring. Deprotonated forms of the three compounds were also investigated by the same chiroptical experimental and theoretical methods, showing how one can find in natural compounds not only biological activity but also biologically compatible sensing probes.

Lyso-H2S: A Mycophenolic Acid-Derived Probe for Ultra-Low Toxicity, Intracellular H2S Detection, and Zebrafish Model Validation.

In several biological processes, H2S is known to function as an endogenous gaseous agent. It is very necessary to monitor H2S and relevant physiological processes in vivo. Herein, a new type of fluorophore with a reliable leaving group allows for excited-state intramolecular transfer characteristics (ESIPT), inspired by mycophenolic acid. A morpholine ring was connected at the maleimide position of the probe to target the lysosome. Subsequently, the dinitrophenyl group known for a photoinduced electron transfer (PET) effect, was connected to allow for an effective "turn-on" probe Lyso-H2S. Lyso-H2S demonstrated strong selectivity towards H2S, a large Stokes shift (111 nm), and an incredibly low detection limit (41.8 nM). The imaging of endogenous and exogenous H2S in living cells (A549 cell line) was successfully achieved because of the specificity and ultra-low toxicity (100 % cell viability at 50 µM concentration of Lyso-H2S.) Additionally, Lyso-H2S was also employed to visualize the activity of H2S in the gallbladder and intestine in a living zebrafish model. This is the first report of a fluorescent probe to track H2S sensing in specific organ systems to our knowledge.

Bright ESIPT emission from 2,6-di(thiazol/oxazol/imidazol-2-yl)phenol derivatives in solution, aggregation and solid states.

Most luminophores often suffer from the problem of aggregation-caused quenching (ACQ) or fluorescence disappearance in dilute solution. It is significant to bridge the gap between ACQ and AIE. In this work, a facile but effective strategy was proposed for the fabrication of always-on luminophores based on the excited state intramolecular proton transfer (ESIPT) mechanism, and six luminophores emitting bright fluorescence in solution, aggregation and solid states were synthesized from 5-tert-butyl-2-hydroxyisophthalaldehyde. All these ESIPT systems show only keto emission owing to their congested structures which block the breakage of intramolecular hydrogen bond (O-H⋯N) by solvation, and subsequently make enol emission impossible. Three of these luminophores are prone to convert into the corresponding phenolate anions emitting blue-shifted emission, which enable them to sense pH variation in the weakly basic range. Furthermore, white-light emission was achieved by combining two of them which show complementary-color fluorescence, and one of them was utilized for bioimaging of living Hela cells and the high-resolution image was obtained.

Electrofluorochromic Hydrogels by Oligothiophene-Based Color-Tunable Fluorescent Dye Doping.

Soft electronic materials hold great promise for advancing flexible functional devices. Among the various soft materials available, hydrogels are particularly attractive for soft electronic device development due to their inherent properties, including transparency, shape adaptability through swelling/deswelling, and self-healing capabilities. Transparent hydrogels contribute to the creation of advanced smart devices such as sensors, smart windows, and anticounterfeiting technologies. Poly(vinyl alcohol) hydrogels are used as a platform for creating electrofluorochromic (EFC) devices in combination with oligothiophene-conjugated benzothiazole derivatives (OCBs) as fluorescent emitters. OCBs demonstrated excited-state intramolecular proton transfer (ESIPT) behavior with a large Stokes shift and emission changes responsive to solvent polarity and pH stimuli. Even in the solid state, OCBs exhibited strong fluorescence emission across a wide range of colors from blue to red, making them exceptionally well-suited for EFC device development. Their quantum yields in the powder state were obtained between 2.3% and 19.9%. Through the incorporation of OCBs into a PVA hydrogel (OCB@PVA), we achieved the successful fabrication of flexible EFC devices, including electronic paper and smart panels. When electric potentials (-2.4 and +2.4 V) were applied in OCB@PVA, fluorescence color changes were observed by an electrochemically induced pH change owing to electrohydrolysis of water. These devices demonstrated the potential of OCB@PVA hydrogels in the realm of flexible electronics. They could be used to create innovative and versatile devices with stimuli-responsive fluorescence properties.