Prevalence of Enterococcus faecalis and Candida albicans in endodontic retreatment Cases: A comprehensive study.

Introduction: Endodontic treatment failures often stem from the presence of microbial pathogens, particularly Enterococcus faecalis and Candida albicans. This study systematically assesses the prevalence of E. faecalis and C. albicans in endodontic retreatment cases, aiming to explore their impact on treatment outcomes. Methods: Employing a systematic sampling approach, 30 patients with a history of previous endodontic treatment were selected. Rigorous clinical and radiographic assessments were conducted, following standardized protocols for root canal sample collection. Microbiological analysis, utilizing selective culture media, was employed to identify and quantify E. faecalis and C. albicans. Statistical analyses, including chi-square and logistic regression tests, were performed. Results: The study involved 30 patients undergoing endodontic retreatment, with comprehensive clinical and radiographic evaluations for cases with and without periradicular lesions. Microbiological analysis unveiled a significant prevalence of E. faecalis and C. albicans, establishing a robust association between these pathogens and retreatment failure. These findings underscore the critical need for targeted antimicrobial interventions to enhance the overall success rates of endodontic retreatment procedures. Conclusion: This study highlights the substantial prevalence of E. faecalis and C. albicans in endodontic retreatment cases, emphasizing the importance of identifying and effectively managing these pathogens for successful treatment outcomes. The notable association between these microbial agents and retreatment failure underscores the imperative for tailored antimicrobial strategies to enhance the efficacy of endodontic retreatment procedures.

Removal of fiber posts using conventional versus guided endodontics: a comparative study of dentin loss and complications.

OBJECTIVES: To compare the efficacy of fiber post removal using conventional (CONV) versus guided endodontics (GE) in terms of dentin loss, residual resin material, procedural errors, and working time in vitro. MATERIAL AND METHODS: Ninety human central incisors were root-filled and scanned by micro-computed tomography (CT), then restored with fiber posts and composite. Twenty-four sets of teeth with up to four human maxillary central incisors were fabricated and divided into three groups: conventional post removal by a general dentist (CG) or endodontology specialist (CS) and guided endodontics (GE) by a general dentist, yielding 30 teeth per operator and group. After treatment, the prepared access cavities were volumetrically assessed by micro-CT. Statistical significance was evaluated by one-way analysis of variance followed by post hoc comparisons with Tukey's HSD test and Pearson's chi-squared test for independence. RESULTS: Both CONV and GE resulted in dentin loss and residual resin material. CS resulted in more dentin loss and less residual resin material than CG and GE (p < .05). All groups had some deviations from the original root canal but no perforations. The shortest working time was observed in the GE group. CONCLUSIONS: Compared to the conventional freehand technique, GE resulted in significantly less radicular dentin loss, a few deviations but no perforations. CLINICAL RELEVANCE: Guided endodontics can improve the speed and safety of fiber post removal without root perforation.

Flatsonic Ultrasonic Tip Optimizes the Removal of Remaining Filling Material in Flattened Root Canals: A Micro-computed Tomographic Analysis.

INTRODUCTION: The aim of this study was to evaluate the effectiveness of the XP-endo Finisher R (XPFR; FKG Dentaire, La Chaux-de-Fonds, Switzerland) or the Flatsonic ultrasonic tip (Helse Ultrasonic, Santa Rosa de Viterbo, SP, Brazil) in removing remaining filling material after the retreatment of flattened root canals using micro-computed tomographic imaging. METHODS: Twenty-four flattened distal root canals of mandibular molars with a buccolingual diameter 4 or more times larger than the mesiodistal diameter were prepared with Reciproc Blue (RB) R40 (VDW GmbH, Munich, Germany) and filled using the Tagger hybrid technique. All canals were retreated with RB R40, and apical enlargement was performed with RB R50 (VDW GmbH). The specimens were randomly distributed into 2 groups: XPFR or Flatsonic (n = 12). The percentage of remaining filling material after retreatment and centralization ability was evaluated. Data were submitted to Mann-Whitney, Wilcoxon, and unpaired t tests (α = 5%). RESULTS: Greater capacity to remove remaining filling material in the entire canal and the cervical and middle thirds was observed for the Flatsonic compared with the XPFR (P < .05). However, both supplementary cleaning techniques showed a similar percentage of residual filling material in the apical third (P > .05). No difference was observed in the centralization ability between the techniques (P > .05). CONCLUSIONS: The Flatsonic promotes greater removal of remaining filling material than the XPFR in the retreatment of flattened root canals. However, both supplementary cleaning approaches were similar in the apical third. The XPFR and Flatsonic were able to maintain root canal centralization.

Evaluation of changes in root canal length and accuracy of the electronic apex locator during different stages of endodontic treatment and retreatment.

This study evaluated changes in the root canal length (RCL) and the accuracy of the electronic apex locator (EAL) during the different stages of endodontic treatment and retreatment. Fifty-six mesial root canals of mandibular molars were selected. The actual root canal length (AL) of the canals was obtained by inserting a size 15 hand file up to the apical foramen, under magnification. The electronic lengths were obtained at the "APEX" mark of Root ZX II, using an alginate model. Both measurements were performed at three different stages of the initial root canal treatment-unflared, flared, and concluded-and at two stages of retreatment, after achieving patency and repreparation. Data were statistically analyzed and the significance level established was 5%. All stages produced a significant reduction in the AL (p < 0.05). The greatest variation was observed between the unflared-flared stages (0.2 mm) and between concluded-patency stages (0.09 mm), with no difference between them (p > 0.05). The accuracy of Root ZX II was negatively affected after achieving patency, presenting statistically significant difference compared to the other stages (p < 0.05). A significant reduction in the RCL was observed along the different stages of endodontic treatment and retreatment. The EAL was accurate to measure the root canals in most stages, except after achieving patency for endodontic retreatment. Determining and monitoring the RCL is an essential step towards a favorable prognosis, since it reduced along the different stages evaluated. Root ZX II was not accurate for endodontic retreatment.

Intracanal removal and apical extrusion of filling material after retreatment using rotary or reciprocating instruments: A new approach using human cadavers.

AIM: This study compared intracanal removal of filling as well as the frequency and volume of extruded material after retreatment with either HyFlex or Reciproc instruments in mandibular teeth from cadavers. METHODOLOGY: The root canals of 14 pairs of contralateral single-rooted teeth in mandibles of cadavers were instrumented with Reciproc R40 and filled using lateral compaction. The mandibles were scanned in a micro-computed tomographic (micro-CT) device before and after retreatment procedures. The contralateral teeth were assigned to two groups (n = 14) according to the retreatment protocol using either HyFlex or Reciproc instrument systems. In the HyFlex group, the HyFlex Remover instrument was worked 3 mm short of the working length (WL), followed by HyFlex CM 40.04 and 50.04 at the WL. In the Reciproc group, the R50 instrument was worked up at the coronal two thirds, followed by two more cycles until the WL was reached. Pre- and post-operative micro-CT images were analysed for extrusion and intracanal removal of filling material. RESULTS: After retreatment, extrusion of filling material occurred in 11 (78%) and 14 (100%) teeth from HyFlex and Reciproc groups respectively (p > .05). A similar volume of extruded material was observed after retreatment with both systems (p > .05). A significant decrease in the intracanal filling volume was verified after retreatment with both tested systems (p < .05). However, residual filling material was found in all root canals, regardless of the system. The amount of filling material removed (HyFlex = 80.8%; Reciproc = 65.9%) and the operation time was similar between systems (p > .05). CONCLUSIONS: A high frequency of filling material extrusion was observed after retreatment with the two systems in a cadaver model, with no significant difference between them. Both protocols obtained similar efficacy in filling material removal procedures, although none completely cleaned the canals.

Effectiveness of Different Rotary Files Systems in Removal of Gutta-percha during Endodontic Retreatment with or without Solvents: A Comparative Study.

AIM: The purpose of the present study was to compare the efficacy of three different file systems in removing gutta-percha during endodontic retreatment with or without solvents. MATERIALS AND METHODS: The current study used 120 freshly extracted, single-rooted human mandibular premolars extracted for orthodontic procedures. The canal was prepared utilizing the step-back technique and obturation was done. The samples were allocated into three experimental groups at random, group I: Hedstrom Files, group II: D-RaCe rotary system, and group III: Mtwo retreatment files system. The three groups were again split into two subgroups of 20 samples each, i.e., with solvent and without solvent. Then, a stereomicroscope with a magnification of × 20 was used to examine the samples. The amount of GP and sealer left was measured in three sections: At apical third (1 mm above the apex), middle third (8 mm from the apex), and coronal third (2 mm below the cementoenamel junction). The obtained data were analyzed using parametric Analysis of Variance (ANOVA). p-values less than 0.05 were considered significant. RESULTS: The overall least debris on the dentinal surface was found in the middle third with/without solvent. The D-RaCe rotary system was 1.24 ± 0.11 and 1.44 ± 0.14, Mtwo retreatment files system was 1.38 ± 0.17 and 1.72 ± 0.09 and Hedstrom files was 2.08 ± 0.21 and 2.18 ± 0.16 respectively and A significant difference was found between the three different file system groups (p < 0.001). CONCLUSION: The current study concluded that, when combined with a solvent, the D-RaCe rotary retreatment system is more effective than the Mtwo rotary retreatment system and Hedstrom Files in removing gutta-percha and sealant from root canal walls. CLINICAL SIGNIFICANCE: When it comes to treating chronic infections, non-surgical retreatment is a more cautious method than periapical surgery. Retreatment should be performed efficiently and with appropriate instruments to ensure effective treatment.

Efficiency of ProTaper Universal Retreatment, Reciproc Blue and XP-endo Shaper in the removal of a bioceramic-based root canal filling.

Purpose: This in vitro study aimed to assess the performance of ProTaper Universal Retreatment (PTUR), Reciproc Blue (RB), and XP-endo Shaper (XPS) system in the removal of bioceramic root canal filling. Materials and methods: Forty-five human single-rooted mandibular premolars were prepared up to 30/.04 and filled with Endosequence BC sealer and BC points before being assigned into three groups (n=15). The root canal fillings were removed until reaching predetermined working length (WL) with PTUR in group 1, RB in group 2, and XPS in group 3. During the removal of the filling material, apically extruded debris was collected in pre-weighed Eppendorf tubes, and operation time was recorded with a digital chronometer. Reaching the WL and maintaining apical patency were evaluated separately. The data were statistically analyzed using Kruskal Wallis and Mann Whitney U tests. Results: The mean amount of extruded debris was highest in the PTUR group, although all instruments caused apical extrusion of debris. The mean time for reaching WL was longest for RB and shortest for XPS, with significant differences among the groups (p<0.05). Although the difference was not significant (p=0.799), in the PTUR group the WL was reached in 93.3% of the samples, which was higher than other groups (86.7%). Conclusion: All tested systems caused a certain amount of debris extrusion. XPS was associated with less extrusion while regaining more rapid access to the periapical area than PTUR and RB.

Efficiency and complications in root canal retreatment using nickel titanium rotary file with continuous rotation, reciprocating, or adaptive motion in curved root canals: a laboratory investigation.

BACKGROUND: It is currently unknown whether rotary file motion affects the best outcome of root canal retreatment. This experimental study compared the efficacy, efficiency, and complications of single-use NiTi rotary files using continuous rotation, reciprocating, and adaptive motions in root canal filling removal in curved root canals. Reciproc blue R25 was used with reciprocating motion (RB), VDW.ROTATE retreatment files with continuous rotation (VR), and ProTaper NEXT X2 with continuous rotation (PTNc) or adaptive motion (PTNa). METHODS: Forty mesial root canals of extracted mandibular first and second molars with an angle of curvature between 20°-40° and a radius of curvature between 5 and 10 mm were collected. The specimens were instrumented and obturated with gutta-percha and AH Plus sealer using the continuous wave of condensation technique. The specimens were randomly divided into 4 retreatment groups (n = 10), RB, VR, PTNc, and PTNa. The percentage of root canal filling removal in each group was analyzed using Micro-Computed Tomography (µCT). The motor running time, total time, root canal complication, and instrument complication were recorded and statistically analyzed (p-value < 0.05). RESULTS: The pre-operative root canal curvature and root canal filling volume were comparable among groups. The percentage of root canal filling removal from the whole canal in the PTNc, RB, PTNa, and VR group was 98%, 96%, 95%, and 93%, respectively. A significant difference was observed between the PTNc and VR groups for the whole canal and the apical-third part. The motor running time and total time were significantly different between the groups. Instrument fracture was observed at 40% in the VR and 20% in the PTNa group, but none in the RB and PTNc groups. CONCLUSIONS: The ProTaper NEXT X2 with continuous rotation and RB files can be used with high efficacy and efficiency in curved root canal retreatment. Continuous rotation is more efficacious and efficient than adaptive motion when using the NiTi rotary file. Single file retreatment can be used in small canals with high efficacy, cost-effectiveness, and less time consumption.

Endodontic Orthograde Retreatments: Challenges and Solutions.

Endodontic orthograde retreatments are considered one of the possible treatment options in case of post-treatment diseases considering the promising results present in the literature. Despite this, a plethora of articles have been published on this topic, and drawing conclusions could be challenging. For this reason, this review aims to summarize the crucial points on each aspect of non-surgical endodontic retreatments, discussing and comparing the current protocols, techniques, materials, and indications. Taking into consideration data from the literature, in terms of diagnosis, CBCT should be considered the first choice, since it can thoroughly affect the diagnosis and treatment plan. Regarding the procedural phases, some conclusions can be drawn: when present, coronal restoration materials such as crowns, partial prostheses, post, and core should be removed; the use of magnification devices, ultrasonic instruments, and an in-depth interpretation of radiographic images with both 2D and 3D images are strongly recommended during the orifice location; additional protocols such as irrigants activation, ultrasonic cleaning, and rotary or reciprocating instrumentation of treated canals are strongly recommended for filling materials removal and to achieve a high-quality chemo-mechanical disinfection; perforations should be treated as soon as possible, and the material of choice to treat them is the MTA or other calcium-silicate-based repair materials; the presence of ledges does not intrinsically reduce the success rate of RCRts if properly managed; in case of instrument fragments, their removal should be considered as the first treatment option, however many variables should be considered to select the proper technique or consider the option of bypassing.

Determination of Antifungal Effect of Natural Oil and Synthetic Gutta Percha Solvents Against Candida Albicans: A Disc Diffusion Assay.

Introduction: The practice of removing root canal fillings with solvent materials is frequently required to help an irrigation solution enter the tubules. The current research was aimed at assessing the antifungal properties specifically the candida albicans of the various solvent materials used for the gutta-percha (GP) material. Materials and Methods: Current research was aimed at as a lab method using the disk diffusion technique where the zone of inhibition (ZOI) was calculated. The materials that were analyzed were: orange oil, xylene, turpentine oil, chloroform, and eucalyptus oil. Candida albicans was the test organism employed in the investigation. The agar plates were covered with approximately 500 µL of the suspension. The sterile and empty disks were impregnated with 10 µL of pure GP solvents. These plates were incubated for one day at room temperature. The ZOI's mean diameters were calculated for all five materials and quantified each solvent's fungicidal activity. For intergroup comparison, ANOVA was utilized. P values < 0.05 were deemed substantial. Results: The maximum inhibition exhibited by the Eucalyptus Oil it was 19.01 ± 1.02 mm. This was followed by Xylene. The other three solvents Chloroform, Orange Oil, and Turpentine Oil exhibited a similar ZOI. When all the solvents were compared there was a significant variance of P < 0.001. However, there were significant variances for the Eucalyptus Oil and the Xylene to all the other solvents P < 0.001. Conclusion: This investigation showed that, in comparison to other solvents, the use of eucalyptus oil considerably reduced the levels of Candida Albicans.

Evaluation of the efficacy of TruNatomy, ProTaper retreatment, and RaCe file systems in retreatment of moderately curved mandibular molars: An in vitro study.

Context: Endodontic retreatment is the first line of treatment in cases of failed primary endodontic treatment. Although associated with challenges such as incomplete removal of obturating material, increased clinical time, and extrusion of apical debris, endodontic retreatment still has considerable success rate in the general population. Aims: The aim of this study was to evaluate and compare the efficacy of TruNatomy, ProTaper retreatment, and RaCe file systems to remove the obturating material, time taken to remove the obturating material, and apical extrusion of debris using cone-beam computed tomography (CBCT). Settings and Design: In vitro study. Subjects and Methods: Forty-five moderately curved mesiobuccal roots of the mandibular molars were instrumented up to #25, 4% taper and obturated with bioceramic sealer and lateral compaction technique. Teeth were divided randomly into three groups (n = 15). Teeth were retreated with TruNatomy, ProTaper retreatment, and RaCe file systems, respectively. Preretreatment and postretreatment CBCT scans were recorded and percentage of obturating material removed was calculated. Time taken to remove the obturating material and apical extrusion of debris was noted. Statistical Analysis Used: Descriptive statistics including percentage, mean, standard deviation, Tukey's post hoc test, Kruskal-Wallis test, and Mann-Whitney Post hoc test were used. Results: The total time needed for the removal of obturating material was comparatively shorter in the RaCe group, followed by the ProTaper retreatment group and TruNatomy group (P < 0.001). TruNatomy files were significantly better in removing the obturating material than the ProTaper retreatment files (P = 0.04). Statically, no difference between RaCe and TruNatomy files was noted. Apically extruded debris was more in the TruNatomy group than in the RaCe and ProTaper retreatment groups (P = 0.01). Conclusions: All tested endodontic files were effective in removal of obturating material, although none could completely remove the filling material and no system could completely eliminate apical extrusion.

Does the presence of full-coverage crown interfere with removal of obturation material: A cone-beam computed tomography image segmentation volumetric analysis.

Aim: The aim of this study was to assess and compare the influence of the presence of full-coverage crown on the obturation material removal efficiency of different retreatment file systems. Materials and Methods: Sixty extracted, human, maxillary premolars were accessed, instrumented, and obturated with gutta-percha and AH Plus sealer. The samples were scanned with cone-beam computed tomography and volume of obturating material was measured using ITK-SNAP volumetric software. Samples were divided (n = 30) into with and without all metal full-coverage crown groups. Each group was then subdivided into three subgroups (n = 10) based on retreatment file used (ProTaper URS, HyFlex Remover, and NeoEndo). The volume of remnants of obturating material was remeasured by image segmentation using ITK-SNAP volumetric software. One-way analysis of variance, followed by the Tukey's post hoc test, was used for data analysis, with a significance level of 5%. Results: A significant difference in percentage remnant of obturating material after retreatment file was observed on overall comparison between with (29.84%) and without crown (21.79%) groups (P < 0.05). Each file system removed significantly more obturating material in without crown samples than with crown samples (P < 0.05). The percentage remnant of obturating material after retreatment file use was as follows: ProTaper URS > NeoEndo retreatment file > HyFlex Remover. All file systems showed significantly different (P < 0.05) efficiency in removal of obturating material. Conclusions: None of the retreatment file systems were able to remove obturating material completely. The presence of full-coverage crown negatively impacted the efficiency of retreatment files for the removal of obturating material. HyFlex Remover performed better than NeoEndo which was better than ProTaper URS.

A rare case of persistent postendodontic symptomatic maxillary central incisor with aberrant canal configuration confirmed by cone-beam computer tomography and its nonsurgical management by retreatment.

Maxillary central incisor is considered the tooth with least anatomical variations. In literature, the prevalence of single root and single canal in maxillary central incisor has been reported as 100%. Only a handful of case reports suggesting more than one root or one canal are available and are mostly associated with developmental anomalies such as gemination and fusion. This article describes a rare case report of retreatment of a maxillary central incisor with two roots with normal clinical crown which was confirmed by cone-beam computer tomography (CBCT). A 50-year-old Indian male patient presented with pain and discomfort on a root canal-treated anterior tooth. Pulp sensibility testing of left maxillary central incisor was negative. Intraoral periapical digital radiograph revealed an obturated canal with suspected outline of a second root which got confirmed with cone shift technique. The tooth was treated under dental operating microscope during which two canals were located and retreatment was completed. Postobturation, CBCT was performed to study the root and canal morphology. Clinically and radiographically, all the follow-up examinations revealed an asymptomatic tooth without any active periapical lesion. The present case report emphasizes the fact that clinicians should approach each case with an open mind having a thorough knowledge of the normal tooth anatomy and should suspect variations in every case to ensure successful endodontic outcome.

Effect of Various Acid Solutions as an Aid in Removing the OrthoMTA-Based Root Canal Filling.

The objectives of this study were to compare the effects of various acid solutions combined with ultrasonics as an aid to remove mineral trioxide aggregate (MTA)-based root canal filling and to assess their effect on the surface topography and microhardness of root canal dentin. MATERIALS AND METHOD: Fifty human permanent single rooted and single canaled freshly extracted teeth were decoronated and sectioned apically to prepare the middle third of root sections of 5 mm length. The canals were prepared in a step-back manner. OrthoMTA was packed throughout the prepared canals. These root sections were incubated for one week and subsequently randomly allocated to five groups (n = 10) according to the OrthoMTA removal method: No treatment (NT); 5% glycolic acid + ultrasonics (5% GA+U); 10% glycolic acid + ultrasonics (10% GA+U); 10% citric acid + ultrasonics (10% CA+U); Distilled water + ultrasonics (DW+U). A 1 mm deep well was created within the coronal end of the set OrthoMTA. Wells were filled with each respective test solution and left for 5 min. Thereafter, further removal of OrthoMTA used a specific ultrasonic tip. Finally, the canals were flushed using 1 mL of the respective test solutions and activated with a Controlled Memory ultrasonic tip for two cycles of 20 s each followed by flushing with 1 mL of distilled water and paper point drying of the canals. Then, specimens were longitudinally split into two halves and examined under a scanning electron microscope (1000×) to assess the residual OrthoMTA and surface topography of root canal dentin. The Vickers surface microhardness of treated radicular dentin was measured using the HMV-2 microhardness tester. RESULT: Data were analysed using one-way ANOVA followed by Tukey's post hoc test. Significant differences for residual OrthoMTA were observed between (10% GA+U) with (5% GA+U), (10% CA+U), (DW+U) and (NT) (p value < 0.01). In the context of microhardness, (5% GA+U) and (10% GA+U) showed statistically significant difference compared to (NT), (10% CA+U) and (DW+U) (p value < 0.01). CONCLUSION: 10% GA+U was superior to other tested groups in removing OrthoMTA, but it substantially reduced dentin microhardness.

Comparable Effectiveness of Photon-Induced Photoacoustic Streaming with XP-Endo Finisher and Passive Ultrasonic Irrigation on Removing Residual Root Canal Filling Materials from Oval Canals.

Objective: This study aimed to evaluate the effectiveness of photon-induced photoacoustic streaming (PIPS), XP-endo Finisher (XPF), and passive ultrasonic irrigation (PUI) for the removal of root canal filling materials from oval root canals. Background: Various adjunctive irrigation techniques following mechanical preparation have been applied to enhance removal of fillings during root canal retreatment. However, whether there is superiority of one approach over others remains controversial. Methods: Thirty extracted single-rooted teeth with oval-shaped canals were instrumented with the ProTaper Next (PTN) system and obturated with the warm vertical compaction technique. After storage at 37°C for 1 month, retreatment was performed with the PTN system up to size X4. The teeth were then randomly assigned into three groups (n = 10) that were, respectively, subjected to supplementary irrigation with different protocols: PIPS, PUI, and XPF, followed by measurement of filling material volumes using high-resolution micro-computed tomography. Results: The PTN preparation resulted in significant reductions in residual filling materials (p < 0.05), whereas PIPS, PUI, and XPF moderately improved the removal of the remnants (p > 0.05). The residual filling materials after supplementary irrigation ranged from 0.384 ± 0.181 to 0.421 ± 0.143 mm3 in oval canals. There was no significant difference in the effectiveness among the PIPS, PUI, and XPF approaches (p > 0.05). Conclusions: Mechanical preparations are useful for removing most root fillings during retreatment in oval-shaped canals. PIPS can reduce residual root-filling materials to the similar extent as PUI and XPF.

The Effect of Number of Visits, Use of Solvent and Gutta-percha Removal Technique on Postoperative Pain following Nonsurgical Endodontic Retreatment; A Systematic Review and Meta-analysis.

Introduction: The nonsurgical endodontic retreatment (NERT) is the first choice of dental ministration when primary/initial endodontic treatment fails. The present study aimed to investigate the presence of postoperative pain (POP) after NERT in permanent asymptomatic teeth as well as possible factors associated with POP. Materials and Methods: A comprehensive search of literature was performed in Pubmed/MEDLINE, Embase, Scopus and Web of Science databases, up to January 2023; including randomized clinical trials and prospective studies. The risk of bias was assessed with RoB 2.0 and ROBINS-I tools. Subgroups analyses were conducted to evaluate the differences in the incidence or level of POP between the number of visits, the use/not use of solvent, the removal technique of gutta-percha, and the period of POP analysis. Mean differences and confidence intervals (CI) of 95% were used as measures of effect, and meta-regression was used along with subgroup analysis. The certainty of evidence was assessed using GRADE, and the probability value of <0.05 was considered significant. Results: Twenty-four studies were selected, with thirteen included in the meta-analysis. There was a statistical difference between the incidence of POP after 24 h (95% CI, 0.28 to 0.52) and one week (95% CI, 0.02 to 0.13) from the endodontic retreatment (P<0.01). However, there was no statistical difference between different techniques, number of visits and use of solvent (P>0.05) in the same period. In addition, the certainty of evidence was very low. Conclusions: Post-operative pain is a common response to NERT, independent of the retreatment technique(s) applied, number of visits and use of solvent(s); with very low certainty of evidence as well as low risk of bias. Moreover, the current analysis showed a (very) serious risk of inconsistency and imprecision. However, POP was significantly reduced within 1 week of the NERT.

Evaluation of volumetric substance loss and precision in targeted endodontic re-treatment with guided versus conventional access cavity preparations: An in vitro study.

Introduction: Root canal retreatment is typically viewed as an "all or nothing" approach. Whether there is periapical pathosis or not, it is advised that all restorative and obturation materials be removed from all roots. Selective root retreatment, a new therapeutic strategy, allows retreatment to be restricted to a single root or multiple roots exhibiting periapical pathosis. To address the issues, "guided endodontics," a unique guided technique for the preparation of apically extended access cavities, was introduced. Materials and Methods: In this in vitro experimental study, 22 freshly extracted two-rooted maxillary first premolars were selected and divided into two groups (n = 11). Pretreatment cone-beam computed tomography imaging of all teeth was performed. Root canal treatment was performed for all samples followed by postendodontic composite restorations with the occlusal stamp technique. Then targeted endodontic retreatment (TER) was done with the conventional method and guided method respectively. The tooth substance loss was measured and evaluated using Ez3D-i-3D-software (VATECH) and work precision was determined by calculating the dentinal loss. Statistical data analysis was done by Independent t-test for substance loss measurement and Chi-square test was used to measure the dentinal loss. Results: TER with conventional method showed significantly higher substance loss with t = 4.591 (P < 0.05) and significantly higher dentinal loss measured in conventional method (P < 0.05). Conclusion: In comparison to traditional TER, TER using a customized bur and three dimensions (3D)-guide results in much less substance loss. The dentinal loss was much lower in 3D-guided approach.

Endodontic retreatment decision-making: The influence of the framing effect.

OBJECTIVE: The aim of this study was to explore the influence of a framing effect in retreatment decision-making of a root-filled tooth with asymptomatic apical periodontitis (AP). METHOD: Two variants of a questionnaire were created in which the factual information about a root filled with AP was identical. The options in the first variant were framed in favor to wait and see (FW) and those in the other variant were framed in favor of retreatment (FR) Two hundred and forty-eight volunteers were by chance given one of the two versions and were asked to choose between having retreatment or to wait and see. RESULTS: Of the 125 participants given the FW version, 69 (55.2%) chose to wait and see while out of the 123 participants who were given the FR version, 38 (30.9%) made the alike choice (p = .0002). CONCLUSION: A framing effect is likely to play an essential role in endodontic retreatment decision-making of root-filled teeth with asymptomatic apical periodontitis.

Surgical management of a lateral lesion refractory to root canal retreatment caused by an extraradicular calculus. A case report.

This article describes the management of a root canal-treated maxillary central incisor displaying a radiographic lateral radiolucency and a sinus tract that persisted irrespective of root canal retreatment following high standards. Endodontic microsurgery was indicated and curettage of the pathologic tissue revealed a calculus-like material attached to the outer root surface around the exit of a large lateral canal. A non-conventional approach was chosen: No root-end resection was conducted. Instead, the calculus was removed and the apical surface was scaled and smoothed, conserving the apical structure. Retrocavities were prepared in both lateral and apical foramens and filled with a bioceramic material. Follow-up examination showed optimal soft tissue healing. One-year follow-up of radiographs revealed healing of the lateral lesion. The lesion was diagnosed as a cyst, with an infected lumen. An exuberant calculus-like material attached to the external root surface was the most likely cause of the recalcitrant lateral periradicular lesion.