Improved Handling of Peptide Segments Using Side Chain-Based "Helping Hand" Solubilizing Tools.

Maintaining high, or even sufficient, solubility of every peptide segment in chemical protein synthesis (CPS) remains a critical challenge; insolubility of just a single peptide segment can thwart a total synthesis venture. Multiple approaches have been used to address this challenge, most commonly by employing a chemical tool to temporarily improve peptide solubility. In this chapter, we discuss chemical tools for introducing semipermanent solubilizing sequences (termed helping hands) at the side chains of Lys and Glu residues. We describe the synthesis, incorporation by Fmoc-SPPS, and cleavage conditions for utilizing these two tools. For Lys sites, we discuss the Fmoc-Ddap-OH dimedone-based linker, which is achiral, synthesized in one step, can be introduced directly at primary amines, and is removed using hydroxylamine (or hydrazine). For Glu sites, we detail the new Fmoc-SPPS building block, Fmoc-Glu(AlHx)-OH, which can be prepared in an efficient process over two purifications. Solubilizing sequences are introduced directly on-resin and later cleaved with palladium-catalyzed transfer under aqueous conditions to restore a native Glu side chain. These two chemical tools are straightforward to prepare and implement, and we anticipate continued usage in "difficult" peptide segments following the protocols described herein.

Fmoc Solid Phase Peptide Synthesis of Oxytocin and Analogues.

Solid phase peptide synthesis is the most commonly used method for the production of peptides. In this chapter, we outline the standard operating procedures used in our laboratory to efficiently access oxytocin-like peptides. This includes detailed descriptions of equipment setup, reagent selection, peptide assembly on solid support, peptide side chain deprotection and cleavage from the solid support, oxidative folding, purification, and analysis.

Design, synthesis, and evaluation of the self-assembled antimicrobial peptides based on the ovalbumin-derived peptide TK913.

The preparation, self-assembly, and antimicrobial activity of peptides based on TK913 is described. TK9Z4 incorporating a Pro-Pro motif exhibited self-assembly but no cytotoxicity. However, peptide TKZ3 (obtained by changing the amino acid sequence of TK9Z4) showed morphological changes at different concentrations, potent antimicrobial activity, low cytotoxicity, and trypsin resistance. Accordingly, TKZ3 is proposed as new AMP derived from ovalbumin-derived peptides.

Antimicrobial activity and secondary structure of a novel peptide derived from ovalbumin.

A novel antimicrobial peptide derived from ovalbumin has been discovered. First, the peptide fragment RKIKVYLPRMK (TK9.1) was identified based on computerized predictions of the secondary structure of peptides in a protein data bank. Using HeliQuest, the sequence was developed into RKIKRYLRRMI (TK9.1.3), which was synthesized using Fmoc-solid phase peptide synthesis, and found to have strongly antimicrobial activity against Gram-positive and Gram-negative bacteria, and fungi but not cytotoxic to HeLa cells and hemolysis in mouse red blood cells. Although ovalbumin itself does not have an antibacterial activity, our results suggest that it may supply the organisms that consume it with antimicrobial peptides, in support of their immunodefence.

Peptidomimetic Synthesis: Drug Discovery for Alzheimer's Disease.

The biomolecular system mainly consists of nucleic acids, proteins, peptides, and sugar chains, and they play a critical role in cell growth, differentiation induction, apoptosis, and immunity. Among these components, peptides are the most commonly studied due to their relatively low molecular weight and high biocompatibility as well as in vitro and in vivo lability and often applied as drugs, agricultural chemicals, food, and tools in diagnostic and biological research. Peptidomimetics have been reported to function as protein-protein interaction inhibitors and thus could serve in many biomolecular systems. This chapter describes the synthesis of peptidomimetics used for discovery of drugs that target ß-secretase inhibitors and amyloid-ß aggregation inhibitors in Alzheimer's disease. For this purpose, natural amino acids and other synthetic acids or amines were used in a solid-phase peptide synthesis (SPPS).

The aspartimide problem persists: Fluorenylmethyloxycarbonyl-solid-phase peptide synthesis (Fmoc-SPPS) chain termination due to formation of N-terminal piperazine-2,5-diones.

Aspartimide (Asi) formation is a notorious side reaction in peptide synthesis that is well characterized and described in literature. In this context, we observed significant amounts of chain termination in Fmoc-SPPS while synthesizing the N-terminal Xaa-Asp-Yaa motif. This termination was caused by the formation of piperazine-2,5-diones. We investigated this side reaction using a linear model peptide and independently synthesizing its piperazine-2,5-dione derivative. Nuclear magnetic resonance (NMR) data of the side product present in the crude linear peptide proves that exclusively the six-membered ring is formed whereas the theoretically conceivable seven-membered 1,4-diazepine-2,5-dione is not found. We propose a mechanism where nucleophilic attack of the N-terminal amino function takes place at the α-carbon of the carbonyl group of the corresponding Asi intermediate. In addition, we systematically investigated the impact of (a) different adjacent amino acid residues, (b) backbone protection, and (c) side chain protection of flanking amino acids. The side reaction is directly related to the Asi intermediate. Hence, hindering or avoiding Asi formation reduces or completely suppresses this side reaction.

An entirely fmoc solid phase approach to the synthesis of daptomycin analogs.

Daptomycin is an important Ca2+ -dependent cyclic lipodepsipeptide antibiotic used to treat serious gram-positive infections. The search for daptomycin analogs with improved activity and their application as tools for studying its mechanism of action has prompted us to develop an entirely Fmoc solid phase approach to the synthesis of daptomycin analogs. Key to the success of this approach was the development of conditions that allowed for the formation of the ester bond on resin-bound peptides consisting of residues 1-10 and the decanoyl lipid tail. The esterification reaction proceeded more efficiently on Tentagel resin as opposed to standard polystyrene resin. This approach was used to synthesize a series of analogs in which each position of Dap-E12-W13, a relatively active daptomycin analog, was individually substituted by alanine. Only positions 2, 6, and 11 were found to be amenable to substitution by alanine in that the corresponding alanine analogs were only 1.5- to 4-fold less active than Dap-E12-W13. We also found that the daptomycin analog, Dap-K6-E12-W13, exhibits in vitro activity approaching that of daptomycin at physiological Ca2+ concentration. Studies with Dap-K6-E12-W13 and model liposomes indicate that this analog interacts with membranes by the same mechanism as daptomycin. This analog is currently being used as a lead for the development daptomycin analogs with improved activity.

A backbone amide protecting group for overcoming difficult sequences and suppressing aspartimide formation.

A backbone amide bond protecting group, 2-hydroxy-4-methoxy-5-nitrobenzyl (Hmnb), improved the synthesis of aggregation and aspartimide-prone peptides. Introduction of Hmnb is automated and carried out during peptide assembly by addition of 4-methoxy-5-nitrosalicylaldehyde to the peptidyl-resin and on-resin reduction to the secondary amine. Acylation of the hindered secondary amine is aided by the formation of an internal nitrophenol ester that undergoes a favourable O,N intramolecular acyl transfer. This activated ester participates in the coupling and generally gives complete reaction with standard coupling conditions. Hmnb is easily available in a single preparative step from commercially available material. Different methods for removing the amide protecting group were explored. The protecting group is labile to acidolysis, following reduction of the nitro group to the aniline. The two main uses of backbone protection of preventing aspartimide formation and of overcoming difficult sequences are demonstrated, first with the synthesis of a challenging aspartimide-prone test sequence and then with the classic difficult sequence ACP (65-74) and a 23-mer homopolymer of polyalanine.

New t-butyl based aspartate protecting groups preventing aspartimide formation in Fmoc SPPS.

Obtaining homogenous aspartyl-containing peptides via Fmoc/tBu chemistry is often an insurmountable obstacle. A generic solution for this issue utilising an optimised side-chain protection strategy that minimises aspartimide formation would therefore be most desirable. To this end, we developed the following new derivatives: Fmoc-Asp(OEpe)-OH (Epe = 3-ethyl-3-pentyl), Fmoc-Asp(OPhp)-OH (Php = 4-n-propyl-4-heptyl) and Fmoc-Asp(OBno)-OH (Bno = 5-n-butyl-5-nonyl). We have compared their effectiveness against that of Fmoc-Asp(OtBu)-OH and Fmoc-Asp(OMpe)-OH in the well-established scorpion toxin II model peptide variants H-Val-Lys-Asp-Asn/Arg-Tyr-Ile-OH by treatments of the peptidyl resins with the Fmoc removal reagents containing piperidine and DBU at both room and elevated temperatures. The new derivatives proved to be extremely effective in minimising aspartimide by-products in each application.

Synthesis of biologically important neutral amylo-ß peptide by using improved Fmoc solid-phase peptide synthetic strategy.

The 10 amino acid sequence of the biologically important neutral amylo-ß peptide has equally hydrophilic and hydrophobic properties, which reduces the coupling efficiency during its synthesis and reduces the final yield of the peptide, and is therefore classified as a "difficult peptide sequence." The method presented here minimizes the synthetic problems by the introduction of improved Fmoc chemistry and effective hydroxybenzotriazole (HoBt), diisopropylcarbodiimide (DIC)-coupling and activation strategies. In addition, we developed a PS-TPGD resin as a solid support for the synthesis of specific neutral peptides, which is still a challenge to peptide chemistry. The most essential biologically active neutral amylo-ß peptide (KVKRIILARS) was successfully synthesized, and some synthetic modification was performed using the Fmoc solid-phase peptide synthesis (SPPS) method for purity and yield improvement. Graphical abstractᅟ.

Synthesis of thioester peptides for the incorporation of thioamides into proteins by native chemical ligation.

Thioamides can be used as photoswitches, as reporters of local environment, as inhibitors of enzymes, and as fluorescence quenchers. We have recently demonstrated the incorporation of thioamides into polypeptides and proteins using native chemical ligation (NCL). In this protocol, we describe procedures for the synthesis of a thioamide precursor and an NCL-ready thioamide-containing peptide using Dawson's N-acyl-benzimidazolinone (Nbz) process. We include a description of the synthesis by NCL of a thioamide-labeled fragment of the neuronal protein α-synuclein.

Tidbits for the synthesis of bis(2-sulfanylethyl)amido (SEA) polystyrene resin, SEA peptides and peptide thioesters.

Protein total chemical synthesis enables the atom-by-atom control of the protein structure and therefore has a great potential for studying protein function. Native chemical ligation of C-terminal peptide thioesters with N-terminal cysteinyl peptides and related methodologies are central to the field of protein total synthesis. Consequently, methods enabling the facile synthesis of peptide thioesters using Fmoc-SPPS are of great value. Herein, we provide a detailed protocol for the preparation of bis(2-sulfanylethyl)amino polystyrene resin as a starting point for the synthesis of C-terminal bis(2-sulfanylethyl)amido peptides and of peptide thioesters derived from 3-mercaptopropionic acid.

Making Ends Meet: Microwave-Accelerated Synthesis of Cyclic and Disulfide Rich Proteins Via In Situ Thioesterification and Native Chemical Ligation.

The development of synthetic methodologies for cyclic peptides is driven by the discovery of cyclic peptide drug scaffolds such as the plant-derived cyclotides, sunflower trypsin inhibitor 1 (SFTI-1) and the development of cyclized conotoxins. Currently, the native chemical ligation reaction between an N-terminal cysteine and C-terminal thioester group remains the most robust method to obtain a head-to-tail cyclized peptide. Peptidyl thioesters are effectively generated by Boc SPPS. However, their generation is challenging using Fmoc SPPS because thioester linkers are not stable to repeated piperidine exposure during deprotection. Herein we describe a Fmoc-based protocol for synthesizing cyclic peptides adapted for microwave assisted solid phase peptide synthesis. The protocol relies on the linker Di-Fmoc-3,4-diaminobenzoic acid, and we demonstrate the use of Gly, Ser, Arg and Ile as C-terminal amino acids (using HBTU and HATU as coupling reagents). Following synthesis, an N-acylurea moiety is generated at the C-terminal of the peptide; the resin bound acylurea peptide is then deprotected and cleaved from the resin. The fully deprotected peptide undergoes thiolysis in aqueous buffer, generating the thioester in situ. Ultimately, the head-to-tail cyclized peptide is obtained via native chemical ligation. Two naturally occurring cyclic peptides, the prototypical Möbius cyclotide kalata B1 and SFTI-1 were synthesized efficiently, avoiding potential branching at the diamino linker, using the optimized protocol. In addition, we demonstrate the possibility to use the approach for the synthesis of long and synthetically challenging linear sequences, by the ligation of two truncated fragments of a 50-residue long plant defensin.

A comparison of Boc and Fmoc SPPS strategies for the preparation of C-terminal peptide α-thiolesters: NY-ESO-1 ³9Cys-68Ala-COSR.

The synthesis of a polypeptide derived from the cancer testis antigen NY-ESO-1 bearing a C-terminal α-thiolester is described. Employing tert-butyloxycarbonyl solid phase peptide synthesis the thiolester moiety was installed on-resin using a mercaptopropionic acid linker, thereby requiring no post synthetic manipulations and delivering the requisite α-thiolester polypeptide after cleavage from the resin with HF. Several 9-fluorenylmethyloxycarbonyl solid phase peptide synthesis approaches whereby the thiolester was required to be introduced in a post synthesis manner were examined concurrently. These comprised syntheses on two different "safety catch" linkers, an N-alkyl-N-acyl sulphonamide and an N-acyl benzimidazolone wherein the thiolester is generated from an activated precursor. The condensation of a mercaptan with the C-terminal carboxylate in a direct thiolesterification reaction was also examined. When using either of the three 9-fluorenylmethyloxycarbonyl-based approaches, the linear polypeptide could be assembled straightforwardly on the solid phase resin; however, a thiolesterification of the C-terminal carboxyl of the fully side chain protected peptide proved to be the most effective post-assembly method for the installation of the C-terminal thiolester.