Recommendations of the DNA Commission of the International Society for Forensic Genetics (ISFG) on short tandem repeat sequence nomenclature.

The DNA Commission of the International Society for Forensic Genetics (ISFG) has developed a set of nomenclature recommendations for short tandem repeat (STR) sequences. These recommendations follow the 2016 considerations of the DNA Commission of the ISFG, incorporating the knowledge gained through research and population studies in the intervening years. While maintaining a focus on backward compatibility with the CE data that currently populate national DNA databases, this report also looks to the future with the establishment of recommended minimum sequence reporting ranges to facilitate interlaboratory comparisons, automated solutions for sequence-based allele designations, a suite of resources to support bioinformatic development, guidance for characterizing new STR loci, and considerations for incorporating STR sequences and other new markers into investigative databases.

Transfer and recovery of DNA and metal particles: A proof-of-concept application of a parallel strategy by DNA and environmental scanning electron microscopy analysis.

According to the principle of Locard "Every contact leaves a trace", when touching a surface, a bi-directional transfer of self and non-self-DNA residing on the hands and touched objects can occur. Metals are commonly encountered in forensic evidence and, during hand contact with these surfaces, a transfer of metal particles could occur together with the transfer of human DNA. This study proposes a proof-concept approach for the original detection of metal particles and touch DNA to track the activity performed by a donor and particularly to assess the metallic substrate touched before the contact with a subsequent surface. To this scope, a scenario of contact events was simulated by three volunteers, who participated in fingerprint deposition firstly on copper and then on plastic and glass surfaces. Twenty-four stubs were collected on the hands of volunteers and the secondary surfaces and then analyzed by environmental scanning electron microscopy (ESEM). DNA was quantified only from copper and plastic surfaces. Ten additional volunteers followed the same protocol of deposition on copper and then on plastic surfaces to evaluate DNA transfer only. On 20 touch DNA samples, the copper surface yielded significantly lower DNA amounts, ranging from 0.001 to 0.129 ng/µl, compared to the secondary touched plastic surface, ranging from 0.007 to 0.362 ng/µl. ESEM-EDS analysis showed that copper particles could be abundantly detected on the hands of the volunteers after contact with the copper surface. Particles containing silicates with copper were shown on plastic, while they were only found in 1/3 of samples on glass. Our proof-of-concept study has shown that ESEM-EDS analysis has the potential to detect copper particles transferred to the hands of volunteers during contact with a copper metallic surface and deposited on secondarily touched items. The results suggest that this original ESEM-DNA parallel approach could potentially allow the tracking of DNA transfer and metal particles at a crime scene, although this represents only a first step and further research on a wider casuistry could help to address the interpretation of results given activity level propositions.

Establishment and Validation of a Multiplex PCR Detection System for the Identification of Six Common Edible Meat Components.

OBJECTIVES: To establish a rapid, accurate, and sensitive multiplex PCR detection method for the simultaneous identification of the six common edible meats (beef, lamp, chicken, pork, goose, duck), and to evaluate its application value in meat adulteration identification. METHODS: Based on complete mitochondrial genomic sequences of six species in the GenBank database, DNA sequences (cattle：16S rRNA; sheep：COX-1; chickens：Cytb; pig：COX-1; goose：NADH2; duck：16S rRNA) with intra-species conservation and inter-species specificity were screened, and species-specific primers were designed to construct a multiplex PCR detection system that can simultaneously detect the meat of six common species. The species specificity, sensitivity and reproducibility of the system were studied, and the simulated mixture sample detection was performed. RESULTS: This study successfully constructed a multiplex PCR detection system that can detect the meats of six common species simultaneously. The system was not effective in DNA amplification of non-target species. When the DNA template sizes were 0.062 5-2 ng/µL, the amplified products of all six species could be detected. The duck component was still detected when the mixing ratio of duck and beef was as low as 0.5%. CONCLUSIONS: This study constructs and establishes a multiplex PCR detection system with strong specificity, high sensitivity, and good reproducibility. It can accurately identify the components of animal origin in common edible meats and provide a simple and practical method for identifying adulteration of common edible meats and meat products in China.

Differentiation of five forensically relevant body fluids using a small set of microRNA markers.

In forensic investigations, identifying the type of body fluid allows for the interpretation of biological evidence at the activity level. Over the past two decades, significant research efforts have focused on developing molecular methods for this purpose. MicroRNAs (miRNAs) hold great promise due to their tissue-specific expression, abundance, lack of splice variants, and relative stability. Although initial findings are promising, achieving consistent results across studies is still challenging, underscoring the necessity for both original and replication studies. To address this, we selected 18 miRNA candidates and tested them on 6 body fluids commonly encountered in forensic cases: peripheral blood, menstrual blood, saliva, semen, vaginal secretion, and skin. Using reverse transcription quantitative PCR analysis, we confirmed eight miRNA candidates (miR-144-3p, miR-451a, miR-205-5p, miR-214-3p, miR-888-5p, miR-891a-5p, miR-193b-3p, miR-1260b) with high tissue specificity and four (miR-203a-3p, miR-141-3p, miR-200b-3p, miR-4286) with lesser discrimination ability but still contributing to body fluid differentiation. Through principal component analysis and hierarchical clustering, the set of 12 miRNAs successfully distinguished all body fluids, including the challenging discrimination of blood from menstrual blood and saliva from vaginal secretion. In conclusion, our results provide additional data supporting the use of a small set of miRNAs for predicting common body fluids in forensic contexts. Large population data need to be gathered to develop a body fluid prediction model and assess its accuracy.

Timber DNA release using focused ultrasound extraction (FUSE) for genetic species identification.

The use of genetic data for timber species and population assignment is a powerful tool for combating the illegal timber trade, but the challenges of extracting DNA from timber have prevented the routine use of genetics as a supply chain management tool. To overcome these challenges, we explored the feasibility of focused ultrasound extraction (FUSE) for rapid DNA release from timber. Using high-pressure ultrasound pulses, FUSE generates a cavitation bubble cloud that disintegrates samples into acellular debris, resulting in the mechanical release of DNA. In this work, FUSE was applied to white oak (Quercus alba) timber shavings to test the feasibility of using FUSE for timber DNA extraction for the first time. Results showed that FUSE processing disintegrated the tissue samples and released significant quantities of DNA. After five minutes of tissue processing DNA quantities of 0.21 ± 0.02 ng/mg, 0.99 ± 0.32 ng/mg, and 0.14 ± 0.01 ng/mg, were released from medium, coarse, and combination shaving groups, respectively. Amplification and sequencing of regions within the matK and rbcL chloroplast genes confirmed that the quality of DNA prepared with FUSE was suitable for PCR and short-read sequencing applications. Overall, these results show that FUSE can serve as a DNA sample preparation method capable of releasing high-quality DNA from timber in a fraction of the time required by conventional extraction methods. Based on the improved efficiency of DNA release with FUSE, ongoing work aims to develop this technology into portable systems that can be used to rapidly prepare timber samples for genetic species identification.

Predictive accuracy of genetic variants for eye color in a Kazakh population using the IrisPlex system.

OBJECTIVE: This study assesses the accuracy of the IrisPlex system, a genetic eye color prediction tool for forensic analysis, in the Kazakh population. The study compares previously published genotypes of 515 Kazakh individuals from varied geographical and ethnohistorical contexts with phenotypic data on their eye color, introduced for the first time in this research. RESULTS: The IrisPlex panel's effectiveness in predicting eye color in the Kazakh population was validated. It exhibited slightly lower accuracy than in Western European populations but was higher than in Siberian populations. The sensitivity was notably high for brown-eyed individuals (0.99), but further research is needed for blue and intermediate eye colors. This study establishes IrisPlex as a useful predictive tool in the Kazakh population and provides a basis for future investigations into the genetic basis of phenotypic variations in this diverse population.

Mitochondrial Control Region Database of Hungarian Fallow Deer (Dama dama) Populations for Forensic Use.

The evidential value of an mtDNA match between biological remains and their potential donor is determined by the random match probability of the haplotype. This probability is based on the haplotype's population frequency estimate. Consequently, implementing a population study representative of the population relevant to a forensic case is vital to correctly evaluating the evidence. The emerging number of poaching cases and the limited availability of such data emphasizes the need for an improved fallow deer mtDNA population databank for forensic purposes, including targeting the entire mitochondrial control region. By sequencing a 945-base-pair-long segment of the mitochondrial control region in 138 animals from five populations in Hungary, we found four different haplotypes, including one which had not yet been described. Our results, supplemented with data already available from previous research, do not support the possibility of determining the population of origin, although some patterns of geographical separation can be distinguished. Estimates of molecular diversity indicate similarly low mtDNA diversity (Hd = 0.565 and π = 0.002) compared to data from other countries. The calculated random match probability of 0.547 shows a high probability of coincidence and, therefore, a limited capacity for exclusion. Our results indicate that despite the overall low genetic diversity of mtDNA within the Hungarian fallow deer samples, a pattern of differentiation among the regions is present, which can have relevance from a forensic point of view.

Bibliometric analysis of kinship analysis from 1960 to 2023: global trends and development.

Kinship analysis is a crucial aspect of forensic genetics. This study analyzed 1,222 publications on kinship analysis from 1960 to 2023 using bibliometric analysis techniques, investigating the annual publication and citation patterns, most productive countries, organizations, authors and journals, most cited documents and co-occurrence of keywords. The initial publication in this field occurred in 1960. Since 2007, there has been a significant increase in publications, with over 30 published annually except for 2010. China had the most publications (n = 213, 17.43%), followed by the United States (n = 175, 14.32%) and Germany (n = 89, 7.28%). The United States also had the highest citation count. Sichuan University in China has the largest number of published articles. The University of Leipzig and the University of Cologne in Germany exhibit the highest total citation count and average citation, respectively. Budowle B was the most prolific author and Kayser M was the most cited author. In terms of publications, Forensic Science International- Genetics, Forensic Science International, and International Journal of Legal Medicine were the most prolific journals. Among them, Forensic Science International-Genetics boasted the highest h-index, citation count, and average citation rate. The most frequently cited publication was "Van Oven M, 2009, Hum Mutat", with a total of 1,361 citations. The most frequent co-occurrence keyword included "DNA", "Loci", "Paternity testing", "Population", "Markers", and "Identification", with recent interest focusing on "Kinship analysis", "SNP" and "Inference". The current research is centered around microhaplotypes, forensic genetic genealogy, and massively parallel sequencing. The field advanced with new DNA analysis methods, tools, and genetic markers. Collaborative research among nations, organizations, and authors benefits idea exchange, problem-solving efficiency, and high-quality results.

DNA typing of cyanoacrylate fumed latent fingerprints using GlobalFiler™ and ForenSeq™ Signature Prep kits.

DNA typing of latent fingerprints is highly desirable to increase chances of individualization. We recovered DNA from Cyanoacrylate (CA) fumed fingerprints and used both GlobalFiler™ and ForenSeq™ DNA Signature Prep kits for DNA typing. For GlobalFiler™, samples were processed using a protocol modified for Low Template (LT)-DNA samples (half-volume reactions, 30 cycles) while for ForenSeq™ DNA Signature Prep, samples were processed using a standard protocol and fluorometer-based library quantitation. We evaluated genotyping success and quality of profiles in terms of completeness, Peak Height Ratio/Allele Coverage Ratio, presence of PCR artifacts and drop-in alleles. With GlobalFiler™, average autosomal STR (aSTR) profile completeness was 44.4% with 2-20 pg, 54.3% with 22-60 pg, and 95% with 64-250 pg DNA input. CODIS uploadable profiles were obtained in 2/10, 3/11, and 11/12 samples in these ranges. With ForenSeq™ DNA Signature Prep, average aSTR profile completeness was 19.7% with 1-20 pg and 45.2% with 22-47 pg but increased to 78.3% with 68-122 pg and 86.7% with 618-1000 pg DNA input. Uploadable profiles were obtained in 0/12, 4/11, 4/7, and 3/3 samples for these ranges. Results show very high sensitivity using both kits. Half-volume reactions and 30 cycles had minimal negative effect on Globalfiler™ profile quality, providing support for wider use after validation experiments to routinely improve results from LT samples. A standard protocol for the ForenSeq™ DNA Signature Prep kit was also highly successful with LT DNA obtained from CA-fumed fingerprints with additional information from isometric STR alleles and other markers.

The Usefulness of qPCR Data for Sample Pre-Assessment and Interpretation of Genetic Typing Results.

DNA quantification is a crucial step in the STR typing workflow for human identification purposes. Given the reaction's nature, qPCR assays may be subjected to the same stochastic effects of traditional PCR for low-input concentrations. The study aims to evaluate the precision of the PowerQuant® (Promega) kit assay measurements and the degree of variability for DNA templates falling below the optimal threshold of the PowerPlex® ESX-17 Fast STR typing kit (Promega). Five three-fold dilutions of the 2800 M control DNA (Promega) were set up. Each dilution (concentrations: 0.05, 0.0167, 0.0055, 0.00185, and 0.000617 ng/µL) was quantified and amplified in four replicates. Variability for qPCR results, STR profile completeness, and EPGs' peak height were evaluated. The qPCR-estimated concentration of casework samples was correlated with profile completeness and peak intensity, to assess the predictive value of qPCR results for the successful STR typing of scarce samples. qPCR was subjected to stochastic effects, of which the degree was inversely proportional to the initial input template. Quantitation results and the STR profile's characteristics were strongly correlated. Due to the intrinsic nature of real casework samples, a qPCR-derived DNA concentration threshold for correctly identifying probative STR profiles may be difficult to establish. Quantitation data may be useful in interpreting and corroborating STR typing results and for clearly illustrating them to the stakeholders.

Sequencing-induced artefacts in NGS STR data.

Significant progress has been made in recent years in the development of techniques for Next Generation Sequencing (NGS), or Massively Parallel Sequencing (MPS), of forensically relevant short tandem repeat (STR) loci. However, as these technologies are investigated and adopted by forensic laboratories, new challenges unfold that require further scrutiny. In the analysis of DNA profiles generated using the MiSeq FGx sequencing system, we have observed noise sequences with relatively high readcounts that are challenging to distinguish from genuine alleles. These high read count noise sequences appear as allele sequences with one or a few substituted bases compared to a known allele sequence within the profile. An examination of ForenSeq DNA Signature Prep Kit STR noise sequences revealed that the substituted base of a parent allele can align to the same position on the sequence across noise sequences. This suggests that these substitution events occur at specific positions within the amplicon, resulting in multiple noise reads with substitutions at the same position. Mapping of the noise events onto the original raw read positions revealed a high number of events, or "noise spikes", occurring at specific positions within a given sequencing run. These noise spikes affected reads across the entire run, agnostic of locus or sample, while the position, occurrence, and amplitude of the spikes differed across runs. The majority of noise sequences with high read counts in a DNA profile were generated from base changes at these spike positions, and could be classified as "noise spike artefacts". In this paper we present evidence of the noise spike artefacts and their genesis during the sequencing process in the sequencing-by-synthesis (SBS) cycles, as well as the methods developed to detect them. The information and methods will assist laboratories with detecting noise spikes in MiSeq FGx sequencing runs, differentiating authentic allele sequences from noise spike artefacts, and developing protocols for analyst review and handling of MiSeq FGx data.

Exploration of identifying individual tumor tissue based on probabilistic model.

Variations in the tumor genome can result in allelic changes compared to the reference profile of its homogenous body source on genetic markers. This brings a challenge to source identification of tumor samples, such as clinically collected pathological paraffin-embedded tissue and sections. In this study, a probabilistic model was developed for calculating likelihood ratio (LR) to tackle this issue, which utilizes short tandem repeat (STR) genotyping data. The core of the model is to consider tumor tissue as a mixture of normal and tumor cells and introduce the incidence of STR variants (φ) and the percentage of normal cells (Mxn) as a priori parameters when performing calculations. The relationship between LR values and φ or Mxn was also investigated. Analysis of tumor samples and reference blood samples from 17 colorectal cancer patients showed that all samples had Log 10(LR) values greater than 1014. In the non-contributor test, 99.9% of the quartiles had Log 10(LR) values less than 0. When the defense's hypothesis took into account the possibility that the tumor samples came from the patient's relatives, LR greater than 0 was still obtained. Furthermore, this study revealed that LR values increased with decreasing φ and increasing Mxn. Finally, LR interval value was provided for each tumor sample by considering the confidence interval of Mxn. The probabilistic model proposed in this paper could deal with the possibility of tumor allele variability and offers an evaluation of the strength of evidence for determining tumor origin in clinical practice and forensic identification.

Case reports on uniparental disomy of chromosomes 6 and 3 in paternity testing.

In paternity testing, when there are Mendelian errors in the alleles between the child and the parents, a slippage mutation, or silent allele may not fully explain the phenomenon. Sometimes, it is attributed to chromosomal abnormalities, such as uniparental disomy (UPD). Here, we present the investigation of two cases of suspected UPD in paternity testing based on short tandem repeat (STR) detection (capillary electrophoresis platform). Case 1 involves a trio, where all genotypes detected on chromosome 6 in the child are homozygous and found in the father. Case 2 is a duo (mother and child), where all genotypes on chromosome 3 in the child are homozygous and not always found in the mother. At the same time, Mendelian error alleles were also observed at specific loci in these two chromosomes. Furthermore, we used the MGIEasy Signature Identification Library Prep Kit for sequencing on the massively parallel sequencing platform, which included common autosomal, X and Y chromosomes, and mitochondrial genetic markers used in forensic practice. The results showed that the genotypes of shared STRs on the two platforms were consistent, and STRs and single nucleotide polymorphisms (SNPs) on these two chromosomes were homozygous. All other genetic markers followed the laws of inheritance. A comprehensive analysis supported the parent-child relationship between the child and the alleged parent, and the observed genetic anomalies can be attributed to UPD. UPD occurrences are rare, and ignoring its presence can lead to erroneous exclusions in paternity testing, particularly when multiple loci on a chromosome exhibit homozygosity.

Forensic features and phylogenetic structure survey of four populations from southwest China via the autosomal insertion/deletion markers.

Insertion/Deletion (InDel) polymorphisms, characterized by their smaller amplicons, reduced mutation rates, and compatibility with the prevalent capillary electrophoresis (CE) platforms in forensic laboratories, significantly contribute to the advancement and application of genetic analysis. Guizhou province in China serves as an important region for investigating the genetic structure, ethnic group origins, and human evolution. However, DNA data and the sampling of present-day populations are lacking, especially about the InDel markers. Here, we reported data on 47 autosomal InDels from 592 individuals from four populations in Guizhou (Han, Dong, Yi, and Chuanqing). Genotyping was performed with the AGCU InDel 50 kit to evaluate their utility for forensic purposes and to explore the population genetic structure. Our findings showed no significant deviations from Hardy-Weinberg and linkage equilibriums. The combined power of discrimination (CPD) and the combined power of exclusion (CPE) for each population demonstrated that the kit could be applied to forensic individual identification and was an effective supplement for parentage testing. Genetic structure analyses, including principal component analysis, multidimensional scaling, genetic distance calculation, STRUCTURE, and phylogenetic analysis, highlighted that the genetic proximity of the studied populations correlates with linguistic, geographical, and cultural factors. The observed genetic variances within four research populations were less pronounced than those discerned between populations across different regions. Notably, the Guizhou Han, Dong, and Chuanqing populations showed closer genetic affiliations with linguistically similar groups than the Guizhou Yi. These results underscore the potential of InDel markers in forensic science and provide insights into the genetic landscape and human evolution in multi-ethnic regions like Guizhou. Key points: InDel markers show promise for forensic individual identification and parentage testing via the AGCU InDel 50 kit.Genetic analysis of Guizhou populations reveals correlations with linguistic, geographical, and cultural factors.Guizhou Han, Dong, and Chuanqing populations showed closer genetic affiliations with linguistically similar groups than the Guizhou Yi.

From Jane Doe to Sofia: DNA Extraction Protocol from Bones and Teeth without Liquid Nitrogen for Identifying Skeletal Remains.

DNA analysis plays a crucial role in forensic investigations, helping in criminal cases, missing persons inquiries, and archaeological research. This study focuses on the DNA concentration in different skeletal elements to improve human identification efforts. Ten cases of unidentified skeletal remains brought to the Institute of Forensic Medicine in Timisoara, Romania, underwent DNA analysis between 2019 and 2023. The results showed that teeth are the best source for DNA extraction as they contain the highest concentration of genetic material, at 3.68 ng/µL, compared to the petrous temporal bone (0.936 ng/µL) and femur bone (0.633 ng/µL). These findings highlight the significance of teeth in forensic contexts due to their abundant genetic material. Combining anthropological examination with DNA analysis enhances the understanding and precision of identifying human skeletal remains, thus advancing forensic science. Selecting specific skeletal elements, such as the cochlea or teeth, emerges as crucial for reliable genetic analyses, emphasizing the importance of careful consideration in forensic identification procedures. Our study concludes that automated DNA extraction protocols without liquid nitrogen represent a significant advancement in DNA extraction technology, providing a faster, more efficient, and less labor-intensive method for extracting high-quality DNA from damaged bone and tooth samples.

Investigating the effectiveness of forensic genetics and population genetic diversity using a multi-InDel system in Chinese Hezhou and Southern Shaanxi Han populations.

INTRODUCTION: Multiple insertion-deletion (multi-InDel) has greater potential in forensic genetics than InDel, and its efficacy in kinship testing, individual identification, DNA mixture detection and ancestry inference remains to be explored. METHODS: Consequently, we designed an efficient and robust system consisting of 41 multi-InDels to evaluate its efficacy in forensic applications in Chinese Hezhou Han (HZH) and Southern Shaanxi Han (SNH) populations and explore the genetic relationships between the SNH, HZH, and 26 reference populations. RESULTS AND CONCLUSION: The obtained results showed that 38 out of the 41 multi-InDels had fairly high genetic variations. The the cumulative probability of discrimination and exclusion values of the multi-InDels (except MI38) in HZH and SNH populations both exceeded 1-e-25 and 1-e-6, correspondingly. The genetic compositions of HZH and SNH individuals were similar to that of East Asians and the Naive Bayes model could well distinguish East Asians, Africans and Americans. These results indicated that the multi-InDel systerm can serve as an effective tool to provide important evidence for the development of multi-InDels in forensic practice and better analyse the genetic background of the Han Chinese populations.

Assessing DNA Degradation through Differential Amplification Efficiency of Total Human and Human Male DNA in a Forensic qPCR Assay.

The assessment of degradation is crucial for the analysis of human DNA samples isolated from forensic specimens. Forensic quantitative PCR (qPCR) assays can include multiple targets of varying amplicon size that display differential amplification efficiency, and thus different concentrations, in the presence of degradation. The possibility of deriving information on DNA degradation was evaluated in a forensic qPCR assay not specifically designed to detect DNA fragmentation, the Plexor HY (Promega), by calculating the ratio between the estimated concentrations of autosomal (99 bp) and Y-chromosomal (133 bp) targets ("[Auto]/[Y]"). The [Auto]/[Y] ratio measured in 57 formalin-fixed, paraffin-embedded samples was compared to a quality score (QS) calculated for corresponding STR profiles using quantitative data (allele peak height). A statistically significant inverse correlation was observed between [Auto]/[Y] and QS (R = -0.65, p < 0.001). The [Auto]/[Y] values were highly correlated (R = 0.75, p < 0.001) with the "[Auto]/[D]" values obtained using the PowerQuant (Promega) assay, expressly designed to detect DNA degradation through simultaneous quantification of a short (Auto) and a long (D) autosomal target. These results indicate that it is possible to estimate DNA degradation in male samples through Plexor HY data and suggest an alternative strategy for laboratories lacking the equipment required for the assessment of DNA integrity through dedicated qPCR assays.

MHBase: A comprehensive database of short microhaplotypes for advancing forensic genetic analysis.

Microhaplotypes (MHs) were first recommended by Prof. Kidd for use in forensics because they can improve human identification, kinship analysis, mixture deconvolution, and ancestry prediction. Since their introduction, extensive research has demonstrated the advantages of MHs in forensic applications and provided useful data for different populations. Currently, two databases, ALFRED (ALlele FREquency Database) and MicroHapDB (MicroHaplotype DataBase), house the published MH information and population data. We previously constructed a single nucleotide polymorphism SNP-SNP MH database (D-SNPsDB) of MHs within 50 bp on the whole human genome for 26 populations integrating basic data such as physical genome positions, mapping of variant identifiers (rsIDs), allele frequencies, and basic variant information. Building upon the previous research, we further selected MHs containing at least two variants (SNPs and/or insertions/deletions [InDels]) within a short DNA fragment (≤ 50 bp) in 26 populations based on the 1000 Genomes Project dataset (Phase 3) to construct a more comprehensive database. Subsequently, we established a user-friendly website that allows users to search the MH database (MHBase) based on their research objectives and study population to find suitable loci and provides other functions such as querying reported loci, performing online calculations using the PHASE software, and calculating ancestral-related parameters. The loci in the database are classified as SNP-based MHs, which include only SNPs, and InDel-including MHs, which contain at least one InDel. Here, we provide a detailed overview of the MHBase and an analysis of shared loci at the global and continental levels, ancestral markers, the genetic distance within loci, and mapping with the genome annotation file. The website is an accessible and useful tool for researchers engaged in marker discovery, population studies, assay development, and panel design.

Public Perspectives on Investigative Genetic Genealogy: Findings from a National Focus Group Study.

BACKGROUND: Investigative genetic genealogy (IGG) is a technique that involves uploading genotypes developed from perpetrator DNA left at a crime scene, or DNA from unidentified remains, to public genetic genealogy databases to identify genetic relatives and, through the creation of a family tree, the individual who was the source of the DNA. As policymakers demonstrate interest in regulating IGG, it is important to understand public perspectives on IGG to determine whether proposed policies are aligned with public attitudes. METHODS: We conducted eight focus groups with members of the public (N = 72), sampled from four geographically diverse US regions, to explore general attitudes and perspectives regarding aspects of IGG practices, applications, and policies. Five major topics were explored in each focus group: when IGG should be used; who should perform IGG; how to approach consent for genetic database users; what systems of oversight should govern IGG practitioners; and whether to notify database users if their data are involved in law enforcement (LE) matching. RESULTS: Participants were supportive of IGG in most scenarios, especially for cold and violent cases. The favorable attitudes toward IGG were, however, tempered by distrust of law enforcement among some participants. All participants agreed that databases must inform users if IGG is allowed, but they did not agree on how individual database users should be allowed to opt out or whether to notify them if their data are involved in specific investigations. All participants agreed that IGG should be subject to some prescriptive guidelines, regulations, or accountability mechanisms. CONCLUSIONS: These findings suggest broad public support for IGG, and interest in developing systems of accountability for its practice. Our study provides useful insight for policy makers, genomic database stewards, law enforcement, and other stakeholders in IGG's practice, and suggests multiple directions for future research.

Collaborative exercise: analysis of age estimation using a QIAGEN protocol and the PyroMark Q48 platform.

Human age estimation from trace samples may give important leads early in a police investigation by contributing to the description of the perpetrator. Several molecular biomarkers are available for the estimation of chronological age, and currently, DNA methylation patterns are the most promising. In this study, a QIAGEN age protocol for age estimation was tested by five forensic genetic laboratories. The assay comprised bisulfite treatment of the extracted DNA, amplification of five CpG loci (in the genes of ELOVL2, C1orf132, TRIM59, KLF14, and FHL2), and sequencing of the amplicons using the PyroMark Q48 platform. Blood samples from 49 individuals with ages ranging from 18 to 64 years as well as negative and methylation controls were analyzed. An existing age estimation model was applied to display a mean absolute deviation of 3.62 years within the reference data set. Key points: Age determination as an intelligence tool during investigations can be a powerful tool in forensic genetics.In this study, five laboratories ran 49 samples and obtained a mean absolute deviation of 3.62 years.Five markers were analyzed on a PyroMark Q48 platform.