Chronic paternal alcohol exposures induce dose-dependent changes in offspring craniofacial shape and symmetry.

Although dose-response analyses are a fundamental tool in developmental toxicology, few studies have examined the impacts of toxicant dose on the non-genetic paternal inheritance of offspring disease and dysgenesis. In this study, we used geometric morphometric analyses to examine the impacts of different levels of preconception paternal alcohol exposure on offspring craniofacial shape and symmetry in a mouse model. Procrustes ANOVA followed by canonical variant analysis of geometric facial relationships revealed that Low-, Medium-, and High-dose treatments each induced distinct changes in craniofacial shape and symmetry. Our analyses identified a dose threshold between 1.543 and 2.321 g/kg/day. Below this threshold, preconception paternal alcohol exposure induced changes in facial shape, including a right shift in facial features. In contrast, above this threshold, paternal exposures caused shifts in both shape and center, disrupting facial symmetry. Consistent with previous clinical studies, changes in craniofacial shape predominantly mapped to regions in the lower portion of the face, including the mandible (lower jaw) and maxilla (upper jaw). Notably, high-dose exposures also impacted the positioning of the right eye. Our studies reveal that paternal alcohol use may be an unrecognized factor contributing to the incidence and severity of alcohol-related craniofacial defects, complicating diagnostics of fetal alcohol spectrum disorders.

Size and shape of the neurocranium of laying chicken breeds.

The neurocranium in birds provides valuable insights into their morphological diversity, including adaptations related to brain size, facial shaping, and environmental factors. This study analyzes the neurocranial shape characteristics and size of chickens with similar genetic backgrounds. By examining the neurocranial shape variation in chickens of the same age and sex, the study aims to understand the factors contributing to morphological diversity within this specific group. 3D geometric morphometrics was used to analyze 235 neurocrania from four chicken breeds. The analysis revealed significant differences in centroid size among the chicken breeds. The largest neurocranium centroid size was found in Sasso chickens., which were statistically separated from Atak-S. Additionally, centroid size effectively differentiates between Lohmann Brown and Lohmann Sandy chicken breeds. The most significant shape variation concerned the width of the rostral part of the frontal bone. However, according to the PC1 value, the shape variation was observed within rather than between groups. Lohmann Sandy chickens exhibited higher variability in neurocranial shape, suggesting greater shape diversity within this breed than others. As for shape analysis, the breeds showed closer similarity to each other. Lohmann Sandy chickens are characterized by positive PC1 value, with the rostral end of the frontal region inclined more ventrally, and a more extensive basioccipital region. Sasso chickens have a more dome-shaped middle part of the frontal region than other breeds. The study also identified the most significant shape variation among the study samples, observed at the rostral part of the frontal bone. These findings contribute to understanding the genetic and environmental influences shaping neurocranial morphology in chickens. Similar studies in different bird species and subspecies offer valuable insights into avian biology and adaptation.

Early Cretaceous troodontine troodontid (Dinosauria: Theropoda) from the Ohyamashimo Formation of Japan reveals the early evolution of Troodontinae.

A new troodontid dinosaur, Hypnovenator matsubaraetoheorum gen. et sp. nov., is described based on an articulated postcranial skeleton recovered from the fluvial deposits of the Albian Ohyamashimo Formation of the Sasayama Group in Tambasasayama City, Hyogo Prefecture, Japan. Hypnovenator is distinguished from other troodontids by four autapomorphies and a combination of additional features. Our phylogenetic analysis positions Hypnovenator as the oldest and one of the most basal troodontines, forming a clade with Gobivenator mongoliensis. The discovery of Hypnovenator suggests that small-bodied maniraptorans with a sleeping posture were common not only in environments with volcanic and eolian events or alluvial systems but also in fluvial systems. Geometric morphometric analysis of manual ungual phalanges shows that manual ungual phalanges I and III of Hypnovenator exhibit considerable morphological variation but are functionally similar, which differs from those of non-troodontine troodontids, reflecting the transition of manual motion within Troodontinae. Hypnovenator also has mosaic features in the pes related to cursoriality. This study reveals that asymmetrical arctometatarsus occurred by the Albian, and some morphological changes, such as shorter digit IV than digit III and non-ungual phalanges of digits III with roller joints and digit IV with weakly ginglymoid articulation, arose during the early Late Cretaceous.

Growing sabers: Mandibular shape and biomechanical performance trajectories during the ontogeny of Smilodon fatalis.

The evolution of organisms can be studied through the lens of developmental systems, as the timing of development of morphological features is an important aspect to consider when studying a phenotype. Such data can be challenging to obtain in fossil amniotes owing to the scarcity of their fossil record. However, the numerous remains of Rancho La Brea allow a detailed study of the postnatal changes in an extinct sabertoothed felid: Smilodon fatalis. Despite numerous previous studies on the ontogeny of Smilodon, an important question remained open: how did the cubs of Smilodon acquire and process food? By applying 3D geometric morphometrics and finite element analyses to 49 mandibles at various developmental stages (22 of S. fatalis, 23 of Panthera leo, and 4 of early diverging felids), we assess the changes in mandibular shape and performance during growth. Both lions and sabertooths exhibit a shift in mandibular shape, aligning with eruption of the lower carnassial. This marks the end of weaning in lions and suggests a prolonged weaning period in S. fatalis owing to its delayed eruption sequence. We also highlight distinct ontogenetic trajectories, with S. fatalis undergoing more postnatal mandibular shape changes. Finally, although S. fatalis appears more efficient than P. leo at performing an anchor bite, this efficiency is acquired through ontogeny and at a quite late age. The delayed shape change compared with P. leo and the low biting efficiency during the growth in Smilodon could indicate an extended duration of the parental care compared with P. leo.

Skull asymmetry in various sheep breeds: Directional asymmetry and fluctuating asymmetry.

Sheep (Ovis aries) play an important role in the economy of Turkey and the Balkan Peninsula due to their use in farming. As a domesticated species, sheep's morphometric and morphological diversity is likely determined by selective breeding practices rather than geographic distribution. This study aimed to analyse four different sheep breed skulls and reveal skull asymmetry using geometric morphometric methods. For this purpose, 2D images of 52 sheep skulls from different breeds were analysed from the dorsal view of the skull, using 28 landmarks. In the comparison of sheep skulls from the dorsal view, the first principal components for directional asymmetry (DA) and fluctuating asymmetry (FA) were 32.98% and 39.62% of the total variation, respectively. Sharri and Ivesi (Awassi) sheep breeds had the broadest distribution of skull shapes among the breeds, while Lara e Polisit was the most conservative breed. DA was used as a measure of biomechanical constraints, and FA was used as an indicator of environmental stress. Consistent with DA, both differences in centroid size and shape between breeds were statistically significant. No differences between males and females related to asymmetry were revealed. Ivesi sheep revealed the highest fluctuating asymmetry. Geometric morphometric methods proved to be a useful tool for distinguishing differences in the shape of the skull of different sheep breeds and also can be useful for taxonomic purposes.

Morphometric study of the legs of the main Chagas vector, Triatoma infestans (Hemiptera: Reduviidae).

In triatomines, vectors of Chagas disease, active dispersal takes place by walking and flying. Flight has received more attention than walking although the last is the dispersal modality used by nymphs due to their lack of wings and also used by adults, which would facilitate the colonization and reinfestation of houses after vector control actions. The present work studied the morphometrical variation of Triatoma infestans legs, the main vector of Chagas disease the Southern Cone of South America. We described morphometric traits and the natural variation of each leg segment. Different linear, size and shape variables of each component of the three right legs of fifth instar nymphs of T. infestans were analyzed using morphometric tools. We analyzed differentiation, variation and correlation for each segment across the fore-, mid and hind legs using different statistical approaches such as general linear model, canonical variates analysis, test of equality of coefficient of variation and partial least square analysis. We also analyzed variation and correlation between segments within each leg with partial least square and morphometric disparity analyses. Our results showed that the segments differed between legs, as general trends, the dimensions (length, width and/or size) were greater in the hind legs, smaller in the forelegs and intermediate in the mid ones. The femur and tibia (length and/or width) showed differences in morphometric variation between legs and the femur and tibia showed the highest levels of correlation between legs. On the other hand, in the fore- and mid legs, the femur (length or width) showed similar variation with tibia and tarsus lengths, but in the hind legs, the femur showed similar variation with all segments and not with the tibia length, and there were strong correlations between linear measurement within each leg. Our results suggest that the femur and tibia could play a determining role in the coordination between the legs that determines the walking pattern. Considering that these segments would also be linked to the specific function that each leg has, this study suggests a preponderant role of the femur and tibia in the walking locomotion of T. infestans.

Copper Stress Causes Shell Morphology Changes in Early Juvenile Anodonta woodiana Based on Geometric-Morphometric Analysis.

In this study, the morphological characteristics of early juvenile shells of Anodonta woodiana, which were exposed to different concentrations of aqueous copper, were analyzed using 10 landmarks to determine morphological changes in the shells. Morphological changes mainly occurred at the top of the shell and front and back ends of the central axis. Stepwise discriminant analysis proved shape differences among experimental and control groups. The results of this study demonstrate for the first time that environmentally relevant copper concentrations cause stress-related morphological changes in A. woodiana in the vulnerable early juvenile stage.

A morphometric approach to morphology analysis of palatal rugae in sibling groups.

Recent advances in imaging technologies, such as intra-oral surface scanning, have rapidly generated large datasets of high-resolution three-dimensional (3D) sample reconstructions. These datasets contain a wealth of phenotypic information that can provide an understanding of morphological variation and evolution. The geometric morphometric method (GMM) with landmarks and the development of sliding and surface semilandmark techniques has greatly enhanced the quantification of shape. This study aimed to determine whether there are significant differences in 3D palatal rugae shape between siblings. Digital casts representing 25 pairs of full siblings from each group, male-male (MM), female-female (FF), and female-male (FM), were digitized and transferred to a GM system. The palatal rugae were determined, quantified, and visualized using GMM computational tools with MorphoJ software (University of Manchester). Principal component analysis (PCA) and canonical variates analysis (CVA) were employed to analyze palatal rugae shape variability and distinguish between sibling groups based on shape. Additionally, regression analysis examined the potential impact of shape on palatal rugae. The study revealed that the palatal rugae shape covered the first nine of the PCA by 71.3%. In addition, the size of the palatal rugae has a negligible impact on its shape. Whilst palatal rugae are known for their individuality, it is noteworthy that three palatal rugae (right first, right second, and left third) can differentiate sibling groups, which may be attributed to genetics. Therefore, it is suggested that palatal rugae morphology can serve as forensic identification for siblings.

Upwelling as a stressor event during embryonic development: Consequences for encapsulated and early juvenile stages of the marine gastropod Acanthina monodon.

Upwelling phenomena alter the physical and chemical parameters of the sea's subsurface waters, producing low levels of temperature, pH and dissolved oxygen, which can seriously impact the early developmental stages of marine organisms. To understand how upwelling can affect the encapsulated development of the gastropod Acanthina monodon, capsules containing embryos at different stages of development (initial, intermediate and advanced) were exposed to upwelling conditions (pH = 7.6; O2 = 3 mg L-1; T° = 9 °C) for a period of 7 days. Effects of treatment were determined by estimating parameters such as time to hatching, number of hatchlings per capsule, percentage of individuals with incomplete development, and shell parameters such as shell shape and size, shell strength, and the percentage of the organic/inorganic content. We found no significant impacts on hatching time, number of hatchlings per capsule, or percentage of incomplete development in either the presence or absence of upwelling, regardless of developmental stage. On the other hand, latent effects on encapsulated stages of A. monodon were detected in embryos that had been exposed to upwelling stress in the initial embryonic stage. The juveniles from this treatment hatched at smaller sizes and with higher organic content in their shells, resulting in a higher resistance to cracking 30 days after hatching, due to greater elasticity. Geometric morphometric analysis showed that exposure to upwelling condition induced a change in the morphology of shell growth in all post-hatching juveniles (0-30 days), regardless of embryonic developmental stage at the time of exposure. Thus, more elongated shells (siphonal canal and posterior region) and more globular shells were observed in newly hatched juveniles that had been exposed to the upwelling condition. The neutral or even positive upwelling exposure results suggests that exposure to upwelling events during the encapsulated embryonic phase of A. monodon development might not have major impacts on the future juvenile stages. However, this should be taken with caution in consideration of the increased frequency and intensity of upwelling events predicted for the coming decades.

Two-Dimensional Geometric Morphometric Method on Frontal Sinus for Race Estimation: A Lateral Skull Radiograph Study

@#Introduction: Race estimation of unknown individual is essential in forensic investigation. The resiliency of frontal sinus makes it a potential tool for biological profiling, particularly in cases where fragmented skeleton persists. Geometric morphometrics is an efficient way to characterise shape. However, the use of frontal sinus to identify race of Malaysians is yet to be investigated. This research employed a two-dimensional (2D) geometric morphometric to examine the morphological differences of the frontal sinus among the major races in Malaysia. Methods: Lateral skull radiographs which comprising of 453 adult Malaysian (151 Malays, Chinese and Indian respectively) were used. The 2D landmarks of eight were placed on the digitalized radiographs and 2D geometric morphometric analysis was performed using MorphoJ software. Results: Procrustes ANOVA revealed a significantly different frontal sinus shape (p-value < 0.05) between races. Canonical variate analysis showed significantly different frontal sinus morphology (p-value < 0.05) between Malay and Indian as well as Chinese and Indian. Discriminant function analysis with cross-validation demonstrated a 57.4% accuracy rate. Conclusion: This population-specific study based on frontal sinus of Malaysians using the 2D geometric morphometric, though less reliable, sheds new light on the potential applicability of this method for race estimation purpose.

Hard and soft tissue shape variation and changes in Class II division 1 malocclusion during orthodontic treatment: a geometric morphometric analysis.

BACKGROUND: This study aims to determine the hard and soft tissue shape variation and its changes in Class II division 1 malocclusion before and after orthodontic treatment using Geometric Morphometric Analysis. METHODS: This retrospective study included 141 pre-treatment and near-end treatment lateral cephalometric radiographs of Class II division 1 malocclusion patients aged 16-40 years with a skeletal II pattern (ANB > 4o). 32 landmarks in Cartesian coordinates were created and identified using MorphoJ software to establish a shape analysis. RESULTS: The vertical dimensions (hypodivergent to hyperdivergent facial profiles) showed the largest variation in the general shape of hard and soft tissue, followed by the anteroposterior dimensions (mild to severe skeletal II patterns). Variations of lip shape (long to short), lip protuberance (everted to inverted), and nasolabial angle (obtuse to acute) were present. Orthodontic treatment affected the shape of the hard and soft tissue significantly (p < 0.0001). T2 showed significant uprighting of upper incisors (17.5o) and lower incisors (3.7o), improved NLA (8o), an increase in upper lip thickness (1.5 mm), and a reduction in lower lip thickness (0.7 mm) (p < 0.05). CONCLUSION: Vertical and anteroposterior shape variations were found. Orthodontic treatment had an impact on both hard and soft tissue shapes. Hence, understanding both the hard and soft tissue shape variations and the orthodontic treatment changes is crucial for an accurate diagnosis and treatment plan to achieve a successful outcome and excellent patient satisfaction.

Using Geometric Morphometric Analysis of Magnetic Resonance Imaging to Assess the Anatomy of the Eustachian Tube in Children with and without Otitis Media.

Otitis media (OM) is among the most common of childhood illnesses. It has long been hypothesized that children under age two are predisposed to OM due to differences in the anatomy of the Eustachian tube (ET), including the angle of the ET. OM in later childhood is less common but does occur, begging the question, are there shape differences in the ET that persist underlying later occurrences of OM? To answer this question, a novel method, which applied geometric and morphometric shape analysis to landmarks obtained from MRI data, was used. MRI scans were performed on 16 children (5 control, 3 cOME, and 8 rAOM) between 2011 and 2015. Sixteen landmarks representing the shape of the ET, cranial base, and palate were analyzed. The results of a Procrustes ANOVA indicate that the shape of the ET varies significantly (p < 0.01) between the OM and control groups. The shape differences between the OM group and the control are a medial and low attachment site of the tensor veli palatini (TVP) muscle, a posterior and high torus tubarius, and an anteriorly projected palate. These results support previous findings that a relatively horizontal ET is associated with a predisposition for OM. This study used a novel approach to examine anatomical differences in children with and without OM. First, the data set is unique in that it includes MRI scans of children with a confirmed OM diagnosis. Second, the use of MRI scans in craniofacial anatomy OM research is novel and allows for the collection of soft tissue landmarks and the visualization of soft tissue structures. Third, geometric morphometric shape analysis is a statistical method that captures shape differences, offering a more universal picture of nuanced changes within the entire set of landmarks, in contrast to more traditional linear and angular measurements used in prior OM studies examining craniofacial anatomy.

Ontogenetic Shifts in Body Morphology of Demersal Sharks' Species (Order: Squaliformes) Inhabiting the Western-Central Mediterranean Sea, with Implications for Their Bio-Ecological Role.

Several elasmobranch species undergo shifts in body proportions during their ontogenetic growth. Such morphological changes could reflect variation in diet, locomotion, or, more broadly, in the species' interactions with their environment. However, to date, only a few studies have been conducted on this topic, and most of them focused on particular body regions. In the present study, the ontogenetic growth of five different demersal shark species was investigated by using both traditional linear morphometry of the entire body and shape analysis of the caudal fin. A total of 449 sharks were analysed: 95 little gulper sharks, 80 longnose spurdogs, 103 kitefin sharks, 124 velvet belly lanternsharks, and 47 angular roughsharks. From each specimen, 36 linear morphometric measurements were taken. While a first canonical analysis of principal coordinates ruled out the possibility of different growth patterns between males and females, the same analysis statistically discriminated between small and large individuals in every species based on their morphology. A Similarity Percentage analysis revealed that the most important measurements in distinguishing these two groups were those related to body lengths, indicating that large individuals are more elongated than small individuals. The shape analysis of caudal fins revealed allometric growth during ontogenetic development, with adult individuals having a wider fin (discriminant analysis, p < 0.05). These findings could be related to changes in predatory skills, supporting the hypothesis of a shift in the ecological role that these sharks play in their environment, thus providing new essential information for their conservation.

Revalidation and expanded description of Mustela aistoodonnivalis (Mustelidae: Carnivora) based on a multigene phylogeny and morphology.

The lacked-teeth pygmy weasel, Mustela aistoodonnivalis Wu & Kao, 1991, was originally described as being from Taibai Mountain and Zhashui county, Shaanxi, China. Subsequently, it was considered a subspecies or synonym of Mustela nivalis. In a faunal survey of northwestern Sichuan, eight specimens of M. aistoodonnivalis were collected. A molecular phylogenetic analysis of one mitochondrial and six nuclear genes clustered the specimens as a distinct clade and not with M. nivalis. Morphologically, the lack of the second lower molar differentiated them from M. nivalis, and genetic distances were typical of discrete species. These analyses confirmed that M. aistoodonnivalis is an independent species in the genus Mustela.

Chicken HOXC8 and HOXC10 genes may play a role in the altered skull morphology associated with the Crest phenotype.

One of the most intriguing traits found in domestic chickens is the Crest phenotype. This trait, characterized by a tuft of elongated feathers sprouted from the head, is found in breeds such as Polish chickens and Silkie chickens. Moreover, some crested chicken breeds also exhibit a protuberance in their anterodorsal skull region. Previous studies have strived to identify the causative factors of this trait. This study aimed to elucidate the role of chicken HOXC8 and HOXC10 in the formation of the Crest phenotype. We explored the effect of ectopic expression of HOXC8 or HOXC10 on the chicken craniofacial morphology using the RCAS retrovirus transformation system. Microcomputed tomography scanning was conducted to measure the 3D structure of the cranial bone of transgenic embryos for geometric morphometric analysis. We found that the ectopic expression of HOXC8 or HOXC10 in chicken heads caused mild morphological changes in the skull compared with the GFP-transgenic control group. Geometric morphometric analysis showed that HOXC8 and HOXC10 transgenic groups expressed a mild upward shape change in the frontal region of the skull compared with the control group, which is similar to what is seen in the crested chicken breeds. In conclusion, this study supports findings in previous studies in which HOX genes play a role in the formation of the altered skull morphology related to the Crest phenotype. It also supports that mutations in HOX genes may contribute to intra- and inter-specific variation in morphological traits in vertebrates.

Characterization of Triatoma infestans (Klug, 1834) (Hemiptera: Heteroptera, Reduviidae) from Residual Foci in the States of Bahia and Rio Grande do Sul, Brazil, Using Geometric Morphology.

Triatoma infestans is one of the main vectors of Chagas disease in Latin America. Although the species is under control in most Latin countries, it is still necessary to maintain epidemiological surveillance. The present study aims to characterize T. infestans populations from residual foci in Bahia and Rio Grande do Sul, Brazil, comparing them with natural populations in Argentina and Bolivia. For this, we adopt the geometric morphometry of the heads. It is possible to report the morphometric variety of the studied populations. In addition, we show that the size of the heads contributes to the differentiation between populations, while the shape has less power to discriminate groups. Furthermore, we show that some natural populations have morphometric proximity to residual populations, suggesting a relationship between these triatomines. Our data do not support the origin of residual populations but demonstrate the importance of new studies with other techniques to understand the dynamics of distribution and reintroduction of these vectors in Brazilian territory.

A Semi-Automatic Method on a Small Italian Sample for Estimating Sex Based on the Shape of the Crown of the Maxillary Posterior Teeth.

Teeth are known to be reliable substrates for human identification and are endowed with significant sexual dimorphism not only in the size but also in the shape of the crowns. In the preliminary phase of our study (already published in 2021), a novel sex estimation method based on dental morphometric geometric (GMA) analysis combined with the artificial neural network (ANN) was developed and validated on a single dental element (first upper premolar) with an accuracy rate of 80%. This study aims to experiment and validate the combination of GMA-ANN on the upper first and second left premolars and the upper left first molar to obtain a reliable classification model based on the sexual dimorphic traits of multiple maxillary teeth of Caucasian Italian adults (115 males and 115 females). A general procrustes superimposition (GPS) and principal component analysis (PCA) were performed to study the shape variance between the sexes and to reduce the data variations. The "set-aside" approach was used to validate the accuracy of the proposed ANN. As the main findings, the proposed method correctly classified 94% of females and 68% of males from the test sample and the overall accuracy gained was 82%, higher than the odontometric methods that similarly consider multiple teeth. The shape variation between male and female premolars represents the best dimorphic feature compared with the first upper molar. Future research could overcome some limitations by considering a larger sample of subjects and experimenting with the use of computer vision for automatic landmark positioning and should verify the present evidence in samples with different ancestry.

Species-Specific Spatial Patterns of Variation in Sexual Dimorphism by Two Lizards Settled in the Same Geographic Context.

The evolution of sexual dimorphism (SD) results from intricate interactions between sexual and natural selections. Sexually selected traits are expected to depend on individual condition, while natural selected traits should not be. Islands offer an ideal context to test how these drivers interact with one another, as the size is a reliable proxy for resource availability. Here, we analysed SD in body size (snout-vent length) and head shape (assessed by geometric morphometric) in two species of lizards (Podarcis muralis and P. siculus) inhabiting the Tuscan archipelago (Central Italy). We found a strong SD variation among islands in both species. Furthermore, in P. muralis emerged some significant correlations between SD and island size, supporting the occurrence of possible effects of individual condition on SD. By contrast, SD in P. siculus followed opposite trajectories than in P. muralis, suggesting that in this species, natural selection could play a major role as a driver of SD. Our findings show that natural and sexual selection can interact in complex ways, and the responses are species-specific. Therefore, spatial patterns of variation in SD may strongly differ among species, even when they settle in the same geographic contest.

Energetic Implications of Morphological Changes between Fish Larval and Juvenile Stages Using Geometric Morphometrics of Body Shape.

The fish body shape is a key factor that influences multiple traits such as swimming, foraging, mating, migrations, and predator avoidance. The present study describes the body morphological changes and the growth trajectories during the transformation from 24 to 54 days post-hatching in the golden grey mullet, Chelon auratus, using geometric morphometric analysis (GMA). The results revealed a decrease in morphological variability (i.e., morphological disparity) with the somatic growth. The main changes affected head size, elongation, and widening of the body. Given that this variability could affect the metabolism, some individuals with different morphologies and in different ontogenetic developmental stages were selected to estimate their potential respiration rate using the Electron Transport System (ETS) analysis. Differences were detected depending on the developmental stage, and being significantly smaller after 54 days post-hatching. Finally, a multivariate linear regression indicated that the specific ETS activity was partially related to the fish length and body shape. Thus, our findings emphasized the relevance of larval morphological variability for understanding the physiological processes that occur during the development.

Morphologies in-between: The impact of the first steps on the human talus.

OBJECTIVE: The development of bipedalism is a very complex activity that contributes to shaping the anatomy of the foot. The talus, which starts ossifying in utero, may account for the developing stages from the late gestational phase onwards. Here, we explore the early development of the talus in both its internal and external morphology to broaden the knowledge of the anatomical changes that occur during early development. MATERIALS AND METHODS: The sample consists of high-resolution microCT scans of 28 modern juvenile tali (from 36 prenatal weeks to 2 years), from a broad chronological range from the Late Roman period to the 20th century. We applied geometric morphometric and whole-bone trabecular analysis to investigate the early talar morphological changes. RESULTS: In the youngest group (<6 postnatal months), the immature external shell is accompanied by an isotropic internal structure, with thin and densely packed trabeculae. After the initial attempts of locomotion, bone volume fraction decreases, while anisotropy and trabecular thickness increase. These internal changes correspond to the maturation of the external shell, which is now more defined and shows the development of the articular surfaces. DISCUSSION: The internal and external morphology of the human talus reflects the diverse load on the foot during the initial phases of the bipedal locomotion, with the youngest group potentially reflecting the lack of readiness of the human talus to bear forces and perform bipedal walking. These results highlight the link between mechanical loading and bone development in the human talus during the acquisition of bipedalism, providing new insight into the early phases of talar development.